Make state transitions within a component of DataList

Similar Questions

• How to make the transition to digital in 10g

  Hi all
  
  
  We have 10g database of primary and standby, I have never worked before sleep, customer wants me start switch, can you please let me know how to make the transition to digital in 10g.
  
  
  Thank you very much.

  It's the way I'm following passage in the
  ------------------------------------------------------------

  (1) check that there is no active users connected to databases.
  (2) select message from v$ dataguard_status;
  (3) select protection_mode from database v$.

  Step 1 check if it is possible to perform a failover.

  SQL > select database_role, db_unique_name, SWITCHOVER_STATUS, v database name $;

  DATABASE_ROLE DB_UNIQUE_NAME SWITCHOVER_STATUS NAME
  ---------------- ------------------------------ -------------------- ---------
  PRIMARY OFMSREGT_SIM UNAUTHORIZED OFMSREGT

  SQL >

  If you get NO allow status for SWITCHOVER_STATUS, verify that the standby database is connectivity.

  If the SWITCHOVER_STATUS column displays ACTIVE SESSIONS, you can successfully achieve a failover by adding the WITH clause LOGOFF to the statement ALTER DATABASE COMMETTRE through PHYSICAL standby

  Step 2 open the passage on the primary database.

  SQL > SHUTDOWN IMMEDIATE;
  SQL > STARTUP MOUNT;
  SQL > ALTER DATABASE COMMIT TO SWITCH STANDBY MODE PHYSICAL;

  Step 4, check the transition state in the view V$ DATABASE.

  SQL > SELECT SWITCHOVER_STATUS FROM V$ DATABASE;
  SWITCHOVER_STATUS
  -----------------
  TO_PRIMARY
  1 selected line

  Step 5 place yourself in the role of physical standby database target the main role.

  You can switch a standby database physical role ensures the primary role
  When the standby database instance is mounted mode redo apply or open
  for read-only access

  SQL > ALTER DATABASE COMMIT AT THE GRADE CROSSING;

  Step 6 complete the transition of the database ensures the main role.

  If the physical standby database has not been opened in read-only mode since the
  the last time it was started, run the SQL ALTER DATABASE OPEN to open
  the new primary database:

  SQL > ALTER DATABASE OPEN;

  If the physical database was opened read only since the last
  time it was launched, you must close the database waiting for target and restart:

  SQL > SHUTDOWN IMMEDIATE;
  SQL > STARTUP;

  Note: There is no need to close and restart other bases before (not involved in the digital switchover) who are online at the time of the failover. These databases on hold will continue to
  function normally once the failover is completed.

  Step 7 if necessary, restart log apply services on standby databases.
  He must deliver the command FRO repeat apply as:
  SQL > change database recovery managed standby database disconnect from the session.
  or
  And stop repeating applies to give
  SQL > alter database recover managed standby database cancel;

  Step 3 Shut down and restart the former primary instance.

  SQL > SELECT OPEN_MODE FROM V$ DATABASE;

  Step 9 check the synchronization between the primary and standby:

  Primary
  SQL > select thread #, max(sequence#) in v$ archived_log where archived = 'YES' group by thread #;

  Sleep mode
  SQL > select thread #, max(sequence#) in v$ archived_log in case of application = 'YES' group by thread #;

  Stop the former primary instance and restart and mount the database:

  Sense of SWITCHOVER_STATUS
  --------------------------------------------
  The column SWITCHOVER_STATUS of v$ database can have the following values:

  NOT ALLOWED - this is a database of pending and the primary database has
  not been first switched, or it's a back-end database and there is no data pending.

  ACTIVE SESSIONS - indicates that there are active sessions of SQL attached to
  the primary database or emergency that must be disconnected before the
  failover operation is allowed.

  Transition to THE PENDING - this is a database of relief and the primary database
  application of the digital switchover has been received but untreated.

  LATENT pass - the digital switchover has been waiting mode, but has not completed
  and I went back to the primary database.

  Primary SCHOOL - this is a database of pending, any sessions active, i.e.
  allows to switch to a primary database.

  In STANDBY mode - this is a primary database, any sessions active, i.e.
  allows to switch to a standby database.

  RECOVERY NEEDED - this is a database of pending that has not received the
  application of the digital switchover.

• States - Transition of the State appointed to named state - Flex 4

  I have an element in a Spark list component with 2 States. In the default state, the item converter is 150 px high. In the expanded state item converter is 350 px high.

  When I leave the default state expanded state transition is not the first time. After that I developed the line then the transition shows both for and from normal to the States expanded.

  Y at - it something I am doing wrong? Do I need to configure another transition?

  He may be having alphaFrom/alphaTo defined on your belongings.  Try to remove that and specifying the alpha values via says.

  See this post for an example: http://forums.adobe.com/message/2793282#2793282

• PID (FPGA) not taken in charge in an FPGA to States transitions?

  I'm currently testing a PID (FPGA) vi in a statechart designed to run on the FPGA, but its gives me the following error.  Am I missing something, or does the PID (FPGA) really not work when you use it in an FPGA to States transitions?

  Thank you

  

  OK, so it turns out that it is a confusing error message/situation. In fact, it is related to the autopreallocate parameter. If you drop PID (FPGA) on a regular VI in a FPGA target and clear the autopreallocation, the VI stops with the same error message.

  Then to use PID in your custody/action States transitions, go to the Properties tab in the configuration dialog box, check the option to autopreallocate and drop the PID. LV will still show the error, because we do not change the setting of autopreallocate until you click OK. If you reopen the configuration dialog box, the error "not supported on target" should be gone.

  I hope this helps.

  -Nick

• diagram States-transitions

  I want to apply calendar and control unit of the 8237 DMA controller in diagram States-transitions, I use labview7.1 tool, can you suggest how to proceed

  Do you intend to connect the 8237A in hardware and do interact with LabVIEW?

• I have photoshop creative suite cs3 for PC. I want to make the transition to Mac products. What is the most simple/less expensive way to do it?

  I have photoshop creative suite cs3 for PC. I want to make the transition to Mac products. What is the most simple/less expensive way to do it?

  Your PC suite has no impact on it, as it is too late for upgrade prices. Simply purchase you a new subscription to creative cloud.

• How can I make this transition?

  Hello everyone,

  I'm new to After Effects and I was wondering how I can make this transition @0: 40

  The last of us: graphic comparison PS4 vs PS3 - YouTube

  Thank you.

  It looks like to the first clip fades to white and then the second clip is fading from white to the original color.

  You can get such fade using an effect levels or curves with two keyframes (one with the default value and such as the image is very bright / almost all white).

  This tutorial shows how to use the effect curves:

  

  Lesson 4 - Color Correction and the curves effect guru | mamoworld

  And this one how to use key frames (you can keyframe the curved parameter as any other parameter):

  

  Lesson 2 - effects and keyframes guru | mamoworld

• How to make a transition with 2 different videos?

  Hello

  I want to synchronize two different angles of a video clip with audio of one.

  I put the video and audio of the original on 1 video in the timeline

  and the second camera angle, (video only) 2 video in the timeline.

  My problem is, I want to make a transition between two videos, but because the videeos are in different sections I am not able to.

  Y at - it an easier way to do it, rather than just pulling the 2 angles of video on the master on 1 video?

  Thank you

  Dave

  You can always slice high video at points when you want to display the video background and set its opacity to zero for these segments.

• How long should I until I can make longer transitions from 01:00 clips?

  (It's one of those 'is it me? Or the software? Or just tired? ("things.)

  I'm working on the project where - it seems - almost all of the clips are "too short" and require the FCP create transition (using what used be called the ripple tool, I think).

  I can understand that for five seconds shorter clips, of course; but as an experience, I wrote a couple of them with themselves, to get a few images at each end use - up to 10-15 seconds, and they were always too short. I slowed them even further... still too short, red on both sides.

  So I wonder: just what is the duration of the minimum clip for a gradual transition decently? Same 02:00 would be better than these 01:00 and: 16 flashes I get and I do not remember whether this way in other projects.

  Thank you very much

  IW

  Manages media are needed.

  Try a test with two clips:

  Make a point in two seconds from the outset and a point off 2 seconds from the end of each clip.

  Place the two items in the timeline panel, and then add a second two cross dissolve.

  Should work.

  FCP X can also let you know if there is no handle media and asks if you want a transition to the detriment of shorten the clips.

  Al

• cRIO-9074 2147138533 error on active state transition analysis engine

  I have a cRIO 9074 configured as master EtherCAT.  The code for the RIO FPGA is followed by other data on the State and he is able to shut down all power to the rest of the system (including the EtherCAT slaves) for safety.  If I power cycle the cRIO (whose power to EtherCAT slaves Travel) I get the following error when it goes into active mode on the scan engine:

  Error 2147138533 has occurred to the property node (arg 1) in the updated scan engine Mode.vi-> RT Startup.vi system

  Possible reasons:

  The telegram is to expire.

  Check that the master device is connected to the EtherCAT network. Ensure that each slave in the EtherCAT network device is turned on and properly connected.

  Is it possible to start the engine even with the slaves turned off?  I just need to change my program to dynamically discover the slaves to stop the scan engine of faults on scan engine transitions?  I don't want to feed my slaves EtherCAT back on until I can read data that are currently being monitored by the scanning engine on the RIO even... is this possible somehow?

  Hello

  EtherCAT is tightly coupled with the analytical engine.  There is no way to set the active scan engine, while an EtherCAT Slave is disconnected.

  I recommend watching the following Article of knowledge-based programmatically discover and access EtherCAT.

  http://digital.NI.com/public.nsf/allkb/FDC87938F1191A3C862578FF00757270

  Kind regards

• Reset the PID.vi only once on the State transition

  Hello

  I'm controlling a fatigue gear using LabVIEW test bed and I use the PID.vi to control the hydraulic circuit. During the transition from the start as a test State, I need once the PID (the integrated error) values to be reset during the transition. The current configuration constantly resets the PID causing the hydraulic output voltage to be lower than the set value. I can't understand how to be set to Boolean false to pass true during the transition from the State and then back to false to prevent resets of the other by default. I have attached the current revision of my code.

  Thank you very much for your help!

  Trace

  It's a good idea, but it is not necessary to select blocks with the true and false as inputs, just equality by different and use the output directly to reset.

  Also, I see that you have PID blocks in two separate cases. Note that those will act independently from each other - if you reset into a State, then move to another State, it will not be reset. Maybe it's what you want, and maybe it isn't, but be sure to put multiple instances of the PID block that control the same in different cases. You can also see weird integral questions when you place in case, if a long time share when you run the same instance.

• Button customized with state transition widget - reversal does not properly

  Hello

  I'm buildding a button custom for a video gallery, which shows three animations different while flipping. The background image becomes more dark, the blades in a graphic element and text fades.

  The problem is that the text disappears only when the mouse is directly over the text. But the buton is much greater.

  Here is the example:

  http://www.jehleproduktion.de/test

  For bild, this animation, I use three instanses of transition musethemes.com widget State. Then I group all these elements together and put them in a button on the State.

  

  What I am doing wrong?

  THX

  Johannes

  Please check whether the transition of the State applies to the text only or the entire frame. The effect should be applied to frame so that on the law, the image effect will be rendered on the page.

  Thank you

  Sanjit

• Access to the Instance of the class within the component TileList DataProvider?

  I have a TileList component that is powered by a DataProvider.  The DataProvider place a class from the source (and the corresponding MovieClip) in the TileList in the form of Visual and interactive objects.

  dpChords.addItem ({label: tt, source: ChordUnit, data:, scaleContent:true});})

  How to pass unique values for instances of the 'ChordUnit' within the TileList?

  public void setChordBin(song:int):void {}

  var dpChords:DataProvider = new DataProvider();

  var i: uint;

  / / determine the game of rope

       If (song ==-1) {}

  activeChords = allChords;

       else {}

  activeChords = songChordSets [song];

       }

  / / filled dataProvider

  for (i = 0; i < activeChords.length; i ++) {}

  var TT = activeChords [i];

  dpChords.addItem ({label: tt, source: ChordUnit, data:, scaleContent:true});})

  }

  chordBin.dataProvider = dpChords;

  FORMATTING

  chordBin.columnWidth = 105;

  chordBin.rowHeight = 115;

  chordBin.direction = ScrollBarDirection.HORIZONTAL;

  chordBin.setStyle ("contentPadding", 5);

  chordBin.setRendererStyle ("imagePadding", 0);

  chordBin.scrollPolicy = ScrollPolicy.ON;

  / / set of style for labels

  chordBin.setRendererStyle ("textFormat", textFormat2);

  / / set the background skin

  chordBin.setStyle ("skin", lightBackground);

  set the CellRenderer

  chordBin.setStyle ("cellRenderer", MyTileListRenderer);

  EVENTS

  chordBin.addEventListener (ListEvent.ITEM_ROLL_OVER, chordBinItemOVER);

  chordBin.addEventListener (ListEvent.ITEM_ROLL_OUT, chordBinItemOUT);

  chordBin.addEventListener (ListEvent.ITEM_CLICK, chordBinItemCLICK);

  }

  I think you should you rewrite ChordUnit class so that path is defined. There are several way to do. One of the ways can be:

  public void ChordUnit(url:String):void {}

  imagePath = url;

  loadDiagramImage (imagePath);

  }

  So, in your setChordBin you can instnatiate directly:

  for (i = 0; i

  var TT = activeChords [i];

  dpChords.addItem ({label: tt, source:new ChordUnit("youUrl.blah"), data:, scaleContent:true});})

  }

• How to change the State of a custom component

  HI (sorry for my English)

  I am new to flex and actionscript...

  I hava a < Application > with 3 States.

  I also create and a custom component that I use in the 'Phase A '.

  Inside the element, I have a < LinkButton > click = "" currentState = "" but do not work. "

  I know that the easy solution is to get out the < LinkButton > component and put it on 'Stage-A' in the Application <>

  Please any other solution?

  Thank you

  You must add an import or you can use it like this

  mx.core.Application.application.currentState = "

  Sincerely,

  Michael

  Sent from my iPhone

  El 20/06/2009, a las 16:27, Ant - will [email protected]> escribio:

  >

  It gives me an error

  «1120: access of undefined property Application.»

  >

  I think I need to change the Application.application. But what?

  >

  Thank you

  >

• transition within the conditional bridge

  In a process, there are 8 interactive activities.
  
  A condition is after activity 1.
  
  If the condition is true, the track will go to acitvity 2 and 3. There is a split
  After the activity 3. A branch has a 4,5,6 activity. Branch B has an activity 7. Then it's the join and activity 8.
  
  However, if the condition is false, the digraph of business processes is that: the follow-up (from the conditional bridge) will go to activity 5.
  
  I can't add a conditional bridge transition to activity 5 the studio now allows me to do this.
  
  I add another interactive activity called activity 5_1. It's good at design time.
  
  However, the customer won't see two activity 5. How to change the design of workflow BPM?
  
  Thank you.

  I don't know why the customer is pushing on with multiple activities in a process of the same name. While it is not always done, it is still quite common and otherwise not in a process of modeling best practices.

  Know you know, but here are a few rules that apply every time you model with Split activities. These same rules apply when you use or Split and multiple activities:

  1. in your scenario, you have two activities between the Split and its corresponding join activity. You can't come in these activities directly outside of the split or transitions / Join model. Activities within a Split and his join cannot have that transitions from them Split activity or other activities within the Split / join the boss.

  2. on the other hand, you can't have transitions between activities within a Split / join directly in activities outside the Split / Join activity template. Activities within a Split and his join cannot have that transitions to the join or other activities within the split / Join model.

  If any of these rules are violated to Split, Split or or more activities, you get a moment of conception (not a runtime) error that will be displayed in the tab.

  Dan