transition within the conditional bridge

Similar Questions

• I can't reset the settings by default in photoshop, which will allow the 'mini' bridge any ideas?

  I tried to uninstall and install the program. I take a class and I need to open the 'mini' within the program bridge.  The instructions were to open the program because it has been opened, press CTRL, alt, and shift to access default settings. I did and the guest came and asked if I wanted to go to default settings, I answered Yes. The program has continued to open and would have disclosed the mini tab bridge low left c@orner of the application page, nothing shows up. It's my dilemma.

  Hello

  The Mini Bridge Panel is no longer available in the most recent major version (15.x) of the Ps CC aka 2014. You can install the previous major version, Ps CC (14.2.1) using the creative Cloud desktop application.

  Using creative cloud | Install, update, or uninstall applications

  Kind regards

  Steve

• The transition from the bridge of one payment to another

  Hello

  We have a customer who currently treat offline credit card transactions that that they have their payment gateway set to 'process (process manually via the existing installation) offline '.

  Now, they want to put in place a bridge of the National Australia Bank (NAB).

  Could someone provide suggestions as to how it would approach the transition from the bridge of one payment to another whereas BC only allows gateway to a payment to be selected at a time?  In other words:

  1. Is it possible that the existing offline payment gateway and the new NAB gateway can coexist so that we could go through a test phase without interrupting the continuity of the customer with the treatment of existing credit offline transactions?
  2. Or do we have to "cut" their existing sales process until the new payment gateway is fully configured and tested?

  Any comments would be much appreciated.

  Gavin

  It is not that much work to spend from OFFLINE to NAB TRANSACT

  I'm not sure, that you need to worry too much on the implementation and testing before to cut more (unless you have a really high turnover store and you want to be careful)

  Perhaps you could watch you log in to your partner portal and reproducing the SITE you want to configure on (if you have an exact dupe). Then you can go about your tests on THIS site and get all tested and functional then cut on the settings when you are happy

  Good luck

  [email protected]

• Photoshop, I'm in a class, I need to reset to default setings, so mini Bridge to open within the program. I followed the instructions and I have reset to the default values. The program open and no bridge mini tab appearred in following the instructions.

  I can't get the program to reset the default settings, enough to open the mini Bridge...  I tried several times and it does not open and you must be able to display two files in the application window and be able to work on it and move layers by following the instructions...!

  Cannot be done in 2014 of CC.  Signs flash support has been removed in 2014 CC.  Mini Bridge used Flash panels. Mini Bridge is not a CC option in 2014.   Adobe keeps Photoshop so its retro-compatible with earlier versions of old Photoshop features and support can be removed and new features and support may be added.  You will need to keep several versions of Photoshop for all your needs.

• case structure: to run once when the condition is true

  I have a case structure in my program. I use this to count the number of cycles in my experience. I have a knot of feedback (image of the program here attaced) within a box structure. I want the case structure to run only ONCE when the condition is "TRUE". Each "TRUE" represents each cycle. The problem that I'm facing here is that the box structure is permanently running as long as it is 'TRUE' instead of running once and wait for the next 'TRUE '.

  Temporaritly I use a timer inside (as you can see in the picture) to contain the program for the next 'REAL' to come. I hold as by case so I know exactly the time. Is it possible to make the case structure running only once when the condition become ' TRUE and wait for the next "REAL"?  OR is there any other loop that case structure that make this work?

  Hi aneps,

  PtByPt_BooleanCrossing is your friend!

  You really need to work on the analysis/description of your problem: you don't want to run the case as long as the entry is set to TRUE, but you want to run the case at the entrance of the past from FALSE to TRUE!

• DB within the R12.2 upgrade upgrade

  Hi all

  We are in the process of upgrading R12.1.3 with 11.2.0.4, R12.2.5 database with 12.1.0.2 Applications database. I'm a little confused about the process to upgrade the database as part of the upgrade to 12.2.

  In accordance with the note "guidelines preparation of database for an E-Business Suite Release 12.2 Upgrade (Doc ID 1349240.1)", I'm reviewing step 2

  Upgrading to the last group of patches (conditional) database
  Customers currently on 11.2.0.3 or 12.1.0.1 must now move to the 11.2.0.4 or 12.1.0.2 within the upgrade 12.2 following the documented process in the appropriate Interoperability Notes (see the References section below). It is highly recommended clients on previous patchsets to the upgrade database to the last.
  
  Complete all steps in interoperability Notes except the following:

  • Check the versions of the software
    • R12 to 12.1.0.2 upgrades (12 c) must apply the 16289505 patch and patch 8796558interoperability *.
    • 11i upgrades to 12.1.0.2 (12 c) must apply the patch of interoperability 16289505 as well as other pre-required patches listed in the 11i Interoperability Notes (My Oracle Support Knowledge Document 1524399.1in the References section below) *.
  • Step 'Run patch post-installation instructions' under 'Database Upgrade' in Section 1
  • Apply patch ECX post-implementation level (in the Notes of interoperability R12/11 GR 2)
  • Recreate the grants and synonyms
  • Restart the application server process
  • Apply the Oracle human resources (HRMS) patch 7721754 (11 I only)
  • Select the database Vault
  • Synchronize the views of Workflow
    • Note that this step must be completed after the 12.2.0 upgrade and application of the last ORS 12.2 when all services are up to such noted in last step be

  This stage supposed to complete interoperability for 12.1.0.2 with R12.1.3? Am I wrong?

  As I'm not going to bring up the applications before upgrade R12.2, that I have to perform interoperability for 12.1.3 or can I perform the steps of interoperability for 12.1,0.2 with 12.2?

  Thank you

  You must apply the patches immediately after installing 12.2.0 software.

  This is mentioned in the section '1.5 request latest patches from application-level technology to perform file system', Oracle E-Business Suite Release Notes, version 12.2 (Doc ID 1320300.1)

  Thank you

  Hussein

• Can I get the total number of records that meet the conditions of a query using the Table API?

  Hello

  A < row > TableIterator is returned when I ask operations using the index of tables. If I want to get the total number of records, I count one by one using the returned TableIterator < row >.

  
  

  Can I get the total number of records directly meets the conditions of the query?

  I can get the total number of records directly the request of the meeting of the conditions of CLI using the command Global table - name tableName - count - index index-name-field fieldName - start startValue-end endValue.

  Can I get the same results using the Table API?

  I used MongoDB and NoSQL Oracle for about a year. According to the experience of the use of these dbs, I think mongoDB querying interface is powerful. In the contras, the query interface is relatively simple, which results is a lot of work that is usually a long time in the client side.

  Hello

  Counting records in a database is a tricky thing.  Any system that gives you an accurate count of the records will have a hotspot of concurrency on updates, namely the place where the counting is maintained.  Such a count is a problem of performance in addition to competitive access problem.   The problem is even more difficult in a system widely distributed such a NoSQL database.

  The CLI has overall command that counts, but does so by brutal force - iterate keys that correspond to the parameters of the operation.  This is how you must do this within the API.  There is not a lot of code, but you have to write.  You certainly want to use TableIterator TableAPI.tableKeysIterator (), because a key iteration is significantly faster than the iteration of lines.  Just one iteration and count.

  If you use TableAPI.multiGet () and a key with a touch of brightness full then, in fact, count the results as they are returned in a single piece (a list).

  Kind regards

  George

• Model of ADF for use within the declarative component project

  Hello

  JDev 11.1.2.4

  I created a project for my declarative components. I want to create an element with an attribute of type oracle.jbo.Row, but this class is not recognized. What are the libraries I need to include if I want to use the object Row.

  Some basic information: my declarative component is bound to a managed bean.

  Import oracle.jbo.Row;

  @ManagedBean (name = "audit")

  @RequestScoped

  public class AuditBean {}

  Online Privacy;

  public AuditBean() {}

  Var UIXDeclarativeComponent = (UIXDeclarativeComponent) JSFUtils.resolveExpression("#{comp}");

  If (vars == null) {}

  again, throw PropertyNotFoundException ("could not find the name of the attribute [comp] component declarative Vars.");

  }

  line = vars.getAttributes () .get ("row");

  }

  }

  Most of our table have the same fields of audit, and we want to create a component that displays audit information. The component would take the line and check if the attributes are present, if so, display them.

  Thank you

  Hello

  Line belongs to the ADF runtime library. However, your declarative component seems to have another flaw, that is, it uses a bean managed within the scope of the request. She should better use backingBean range (a range of task flow) so it can be used multiple times on a page without the substitution of a previous rendering information. Maybe this isn't a problem if the component cannot forget his condition after rendering

  Frank

• Remove the conditional text

  In my text selected with two conditional text (red and green). I must remvoe the conditional text in red in the selected text

  How to do this

  Try this:

  (function removeConditionalText(/*Text*/tx,/*UIColor*/uiColor,/*bool=false*/STRICT)
  // -------------------------------------
  // Remove any text within tx having a uiColor condition applied.
  // (If STRICT is true, do not affect text undergoing multiple conditions.)
  {
      var ranges = tx.textStyleRanges,
          a = ranges.everyItem().getElements(),
          conds = ranges.everyItem().appliedConditions,
          i = a.length,
          t, c;
  
      while( i-- )
          {
          t = conds[i];
          if( STRICT && t.length != 1 ) continue;
          while( (c=t.pop()) && !(c=c.indicatorColor==uiColor) );
          if( c ) a[i].remove();
          }
  
  })(app.selection[0],UIColors.RED);
  

  @+

  Marc

• Merge the queries based on the conditional

  Apex 4.2

  I have a pretty complex question. I have a page that will have a selection list on the data entry form. The selection list contains a list of both 1) Active only or 2) active and inactive areas. We show the active areas when we create a new record (P101_ID IS NULL), we appear active and inactive sectors when you edit a record (P101_ID IS NOT NULL). I have therefore two separate queries to account for each case. Simple so far.

  Problem I am seeing that create two lists of selection on the page and put a separate condition on each one (hiding one of selection lists depending on the case the ID IS NULL or the ID IS NOT NULL) does not work. So I was wondering if there was a way to combine queries for that to work based on a conditional statement. I did experiment with the instructions box and unions, etc., but my questions are a bit complicated. They are as follows:

  LIST OF ASSETS SECTORS (P101_ID is NULL)

  Select unique
  ISEC.inspection_sector_name,
  ISEC.inspection_sector_id
  From
  INSPECTION_SECTORS ISEC
  left join HWE_INSPECTION_SCHEDULING SCH on ISEC.inspection_sector_id = SCH.inspection_sector_id
  Where (ISEC.hurricane_protection_flag = :P157_IS_HURR and ISEC.river_protection_flag = :P157_IS_RIV) AND
  ISEC.superseded_date is null AND
  ISEC.commenced_date is not null AND
  ISEC.inspection_sector_id not in (
  Select ISEC.inspection_sectors_id
  From INSPECTION_SECTORS ISEC
  left join HWE_INSPECTION_SCHEDULING SCH on ISEC.inspection_sector_id = SCH.inspection_sector_id
  Where SCH.high_water_event_id = :P157_high_water_event_id AND
  SCH.inspection_date = :P157_inspection_date)
  OR ISEC.inspection_sector_id = :P157_inspection_sector_id AND
  ISEC.superseded_date is null
  Order by inspection_sector_name
  

  LIST ACTIVE AND INACTIVE SECTORS (P101_IS is NOT NULL)

  Select inspection_sector_name, inspection_sector_id From (
  Select ISEC.inspection_sector_name, ISEC.inspection_sector_id, '0' as this
  From dual, INSPECTION_SECTORS ISEC
  left join HWE_INSPECTION_SCHEDULING SCH on ISEC.inspection_sector_id = SCH.inspection_sector_id
  Where (ISEC.hurricane_protection_flag = :p157_IS_HURR and ISEC.river_protection_flag = :P157_IS_RIV) AND
  ISEC.superseded_date is null AND
  ISEC.commenced_date is not null AND
  ISEC.inspection_sector_id not in (
  Select ISEC.inspection_sector_id
  From inspection_sectors ISEC
  left join HWE_INSPECTION_SCHEDULING SCH on ISEC.inspection_sector_id = SCH.inspection_sector_id
  Where SCH.high_water_event_id = :P157_high_water_event_id AND
  SCH.inspection_date = :P157_inspection_date)
  OR ISEC.inspection_sector_id = :P157_inspection_sector_id AND ISEC.superseded_date is null
  UNION
  Select unique
  ISEC.inspection_sector_name|| ' [CLOSED]', ISEC.inspection_sector_id, '1' as this
  From dual, INSPECTION_SECTORS ISEC
  left join HWE_INSPECTION_SCHEDULING SCH on ISEC.inspection_sector_id = SCH.inspection_sector_id
  Where ISEC.superseded_date is not null and ISEC.commenced_date is not null AND
  ISEC.river_protection_flag =:P157_IS_RIV and ISEC.hurricane_protection_flag = :P157_IS_HURR AND
  ISEC.inspection_sector_id not in (
  Select ISEC.inspection_sector_id
  From INSPECTION SECTORS ISEC
  left join HWE_INSPECTION_SCHEDULING SCH on ISEC.inspection_sector_id = SCH.inspection_sector_id
  Where SCH.high_water_event_id = :P157_high_water_event_id AND
  SCH.inspection_date = :P157_inspection_date)
  OR ISEC.inspection_sector_id = :P157_inspection_sector_id NAD ISEC.superseded_date is not null
  Order by this, inspection_sector_name asc
  

  If the requests are quite complex. I tested the times and they work in APex, separately from the course. Forgive me if I have mispeled anything. But any help on this would be greatly appreciated. Thanks in advance.

  Thank you for taking to your friend Frank. You are a bird-guy (my attempt at sarcasm). Nobody has questioned whether its knowledge base; more so in the way he responded to my original post did not «do» Like the people who come on this forum looking for help to those who have greater knowledge, it would be nice to be greeted a little more friendly, lol. Just my thoughts. But, feel free to correct my spelling test, grammar and syntax in my sentences so (the effort once again to emphasize that I misspelled 'AND', and that the request would not be performed--> of course... smh... you are funny)

  Apparently I failed to explain the issue in its entirety. I should start by saying... "I have two separate petitions that I tested and already working and am looking to put on a list of selection (at the top) with a conditional execution statement one or the other, through the conditional statement, but again, I was looking for more so for syntax and structure." I'm sorry, I forgot to mention that.

  Anyway, enough of this. I found a solution to my problem:

  Within the Apex 4.2, you can have a list of selection as a page element. I want to display different results depending on whether Yes or no P101_ID is set to Null or NOT NULL

  P101_ID is a primary key for a table.

  P101_ID is not the exact name I use in my application / request however.

  In addition, you don't need to include double; It's not make or break the query. Something that I forgot to omit them.

  In addition, something along the lines of

  Select inspection_sector_name, inspection_sector_id From (
  .....all the stuff in query 1.......)
  Where P101_ID is null
  UNION
  Select inspection_sector_name, inspection_sector_id From (
  ....all the stuff in query 2.....)
  Where P101_ID is not null
  

  will work on a selection list in the APex. So problem solved. Thank you for all your wonderful insight, of words and thoughts. Thank you.

• Check the conditional uniqueness

  Hi all
  
  I have a requirement where I need to check the uniqueness of two columns under certain conditions, here a sample of data and table:
  
  code
  () acc_allocation_limit
  ID NUMBER
  PRIMARY KEY CONSTRAINT Acc_allocation_limit_pk
  , occupancy_group VARCHAR2 (3)
  , move_reference VARCHAR2 (4000)
  )
  
  occupancy_group can have values "SNG", "TWN" and could thus be null
  move_reference is a free text, including and especially NULL
  
  Can/cannot, we have following values set:
  move_reference occupancy_group allowed
  Y               SNG          a
  Y SNG
  Y SNG
  B Y SNG
  Y               TWN          a
  Y               TWN          b
  TWN Y
  TWN Y
  N               SNG          a
  N               TWN          b
  code
  
  I understand, I can't have:
  CHECK constraint which can call any function in PL/SQL and so is true with a UNIQUE constraint.
  Before you INSERT or UPDATE TRIGGER, as it will result in the transfer of error.
  After INSERT or UPDATE TRIGGER, as I it comes have test the data before inserting
  COMPOSED of TRIGGERS, as I am about 10 gr 2
  
  I'm not ready to believe that we cannot achieve within the oracle database (assertion pre era), the problem is the insertion that happens in the java layer where it is coded as "INSERT IN...» "instead of calling any package DB, else this could be verified at the level of the package.
  
  It can be very easy to a point that I'm missing on the side of the DB, a help would be really appreciated.
  
  Thank you
  Ash
  
  Published by: ash0602 on July 19, 2011 15:48

  This thread might give you some ideas: http://asktom.oracle.com/pls/apex/f?p=100:11:0:P11_QUESTION_ID:1249800833250

• spend the conditional statements

  Hello everyone I've been working on a duty where we created a game of the match.  It is for me to find a way to tell the script action what difficulties the game of the user of the game to.  There are 3 easy buttons, mediym, hard.  Each sets out an increased number of cards say 4 to 8 easy for way etc.

  We are supposed to use the conditional switch to do this.  My problem is how do you know what button was clicked the switch?

  Here's the code so far, he is only set up for the easy right now.  It works fine until I tried to set up the switch.

  Thanks for any help you might be able to give.

  package {}

  import flash.display.MovieClip;

  import flash.display.Sprite;

  import flash.events. *;

  import flash.text.TextField;

  import flash.utils.Timer;

  import flash.utils.getTimer;

  import flash.media.Sound;

  SerializableAttribute public class Match extends MovieClip {}

  var showingCard:Card = null;

  const DELAY_TIME = 1000;

  public void Match() {}

  trace ("Match");

  introscreen.btnMenu.btnEasy.addEventListener

  addChild (introScreen);

  If a card is displayed showingCard refers to it

  card otherwise

  introScreen.btnMenu.btnEasy.addEventListener (MouseEvent.CLICK, onClickButton);

  } / / end of the constructor

  function onClickButton(e:MouseEvent):void {}

  trace ("onClickButton");

  {Switch (e.Target.Level)}

  'easy ': case study

  layoutCards (2);

  break;

  }

  }

  //

  function layoutCards(gridSize:int):void {}

  trace ("layoutCards");

  put gameScreenOnTop

  addChild (gameScreen);

  creat bridge of the faceValues valid

  var Bridge: Array = [];

  var lastFrame:int = gridSize * gridSize / 2 + 1;

  for (var k: int = 2; k < = lastFrame; k ++) {}

  Deck.push (k, k);

  }

  trace (Deck);

  layout maps

  for (var i: int = 0; i < gridSize; i ++) {}

  for (var j: int = 0; j < gridSize; j ++) {}

  trace (i, j);

  Map: map of var = new Card();

  size

  Card.Width = stage.stageWidth/gridSize;

  Card.Height = stage.stageHeight/gridSize;

  location

  Card.x = i * card.width;

  Card.y = j * card.height;

  important assign a face value, drawn randomly from the deck

  card.faceValue = randomInteger (2.19).

  card.faceValue = deck.splice (randomInteger (0, deck.length - 1), 1);

  Listening

  card.addEventListener (MouseEvent.CLICK, onClickCard);

  Add

  card.gotoAndStop (1)

  gameScreen.addChild (card);

  } //j

  } //i

  } / / end of method of positioning cards

  makecard start clickable

  function onClickCard (e:MouseEvent) {}

  trace ("onClickCard");

  var clickedCard:Card = (e.target) Card;

  Turn the card clicked

  clickedCard.visible = false;

  Click on the first map in pair

  3 cases

  1 card clicked is the first in the bet

  See the map and remomber it

  make it not clickable at the moment

  If (showingCard == null) {}

  trace ("FirstCard")

  clickedCard.gotoAndStop (clickedCard.faceValue); external

  showingCard = clickedCard; internal

  clickedCard.removeEventListener (MouseEvent.CLICK, onClickCard);

  }

  2A - click map is a second pair, and friendly the FirstMatch

  both take-out

  Else if (clickedCard.faceValue == showingCard.faceValue) {}

  trace ("match")

  gameScreen.removeChild (clickedCard);

  gameScreen.removeChild (showingCard);

  showingCard = null;

  }

  2B - clickedCard is second and not a match for the first.

  Return both

  else {}

  clickedCard.gotoAndStop (clickedCard.faceValue);

  freeX during a short period of time

  addChild (blockScreen);

  var: timer = new Timer(DELAY_TIME,1);

  timer.addEventListener (TimerEvent.TIMER,

  function onTimer(e:Event) {function //annonymus

  delay this code

  clickedCard.gotoAndStop (1);

  showingCard.gotoAndStop (1);

  clickable map list

  showingCard.addEventListener (MouseEvent.CLICK, onClickCard);

  showingCard = null;

  addChild (gameScreen);

  }

  );

  Timer.Start ();

  }

  }

  } / / Match class

  } / / packages

  When I click on the easy button in the swf file I get this message.

  ReferenceError: Error #1069: property not found on flash.display.SimpleButton level and there is no default value.

  to Match / onClickButton)

  The switch statement checks the 'e.target.level' to see which option has been selected, the part level of this being the word "Easy" or anything else.  e.Target points to the object that sent the event, which seems to be a SimpleButton object.  But a SimpleButton object cannot have the properties created for her as a movieclip can, in order to verify his 'level' property is looking for something that is not normally.

  Where assign you the level of ownership, of what object it give you?

  (hindsight: don't want to jump on the reaction of Dave.)  This meets an ask me if... I always check before submitting a message to see if someone answered while I was devise a response and normally go back on the forum to check... If if I don't post unless there is a marked difference is answers this time I just went back one level and not seen no response, so I thought that none received... it looks like going back to the forum is the right path to follow)

• Make state transitions within a component of DataList

  I have a datalist that includes a word bubbles title, data and long list of text for each line in the list of data. I want this to appear as the title, date and a word bubble extracted text. When the user clicks on it, I want the text box expand to show more text. To do this, I went into the isolation of the repeated item mode. In the "Selected" State, I enlarged the text box and made a smooth transition. It works exactly as I want it. Now, I want to click a button box and the box shrink to the way it is 'normal '.  However, when I try to add an interaction to the button while in the 'selected' State the menu interactions I cannot choose a State play transition to and the ok button is grayed.  Once the user clicks on the text, he enlarged and is now frozen this way that I'm not able to add a way to transition to the 'normal' State

  The reason seems to be that if you are in a 'normal' State, you can easily select the 'selected' State However, there is no natural transition of the "selected" back to 'normal '.

  Hi infomotive,

  The logic that controls which list item is selected is determined by the selectedIndex from the list. When you click an item, selectedIndex of the list has the index value of that element, which puts the appropriate in repeated item in turn has "selected" State (and puts the previously selected item in its 'Normal' State). All this is done for you by Flex, and you cannot directly control the State of a repeated element (or, in fact, no matter which component skin!). In order to state of an item to 'Normal', you set selectedIndex from the list to not be the point.

  You can do this by creating an action sequence with effect of the value of property that affects the selectedIndex property of the list - 1 (which means that nothing is selected). Unfortunately, this is impossible within the repeated element itself because the interaction Panel won't let you target objects that are at the top of the hierarchy of the source of the event! So actually there is no right way to do what you want to do in the last version of Flash Catalyst. However, it is quite easy in Flash Builder:

  -Adam

• How to use the conditions where there are more than two options

  I have a blade that collects information from the user and then makes decisions based on the values entered. On a slide I use the widget drop-down list and list of"basic", "Intermediate" and "Advanced". I hoped to do is use the Coditional Structure as follows:
  
  1. If the Basic was selected slide goto BasicQuickQuiz
  2. If the intermediary has been selected goto slide IntermediateQuickQuiz
  3. If Advanced was selected slide goto AdvancedQuick Quiz
  
  I can make this work for Basic or intermediate, but I don't see how (or even if) I have a multi level if statement.
  My work is about:
  1. a button added logic:
  So basic, then got otherwise BasicQuickQuiz goto IntermediateQuickQuiz
  
  2. on the Enter slide on IntermediateQuickQuiz event:
  If the intermediary, then keep, otherwise goto slide AdvancedQuick Quiz
  
  It works, but it seems awkward - y at - it another way that this goal could be achieved?
  
  Tim

  What I was hoping to see was the ability to create several Else If statements within the only condition. I've changed it now to add two conditional statements, one after the other, but still find this unscrupulous feature.
  I will record a feature request to add a Select Case block / Switch style fuction to this group.
  However, since it is new I can live with the workflow (for this version of Cp anyway!)

  Tim

• The deleted output tables finished when the conditional tags using build

  Hi and thanks for any help you can offer on this...
  
  I use the WebHelp/print Documentation HR 6 single-sourcing method, and I created two build conditional tags - "OLH" (online help) and "printed". Essentially, the conditional tags are awesome... except when my content includes HTML tables. If a table exists within a set of conditional tag material, material that exists AFTER the table (and outside the conditional tag) is omitted from the finished output (i.e., regardless of the unique method out of the Source used for the production of finished products - WebHelp or printed Documentation). In some cases, only certain documents after the table is omitted.
  
  For example, in a comprehensive document which includes a specific paragraph and a data table I want to exist only in my printed docs. I apply the tag "Print" in this paragraph and the table. Once I have generate the schema of WebHelp (or even preview and apply the term appropriate on the conditional tag build), labeled "Print" content is left out, but is so everything that followed it. even if I don't apply a tag of conditional compilation to the material in question.
  
  I have a workaround, but it sucks... If I delete the tables (and re - format the text content), everything is fine, and the build tags work properly. The thing is, I want to use the tables in my content.
  
  I wish a WYSIWYG solution, but if I have to change the code, I'll live... I just need to know what and where to change (I played with the ' < p > < style = "" x-condition: printed; ' > ' tag and additional locking "< /p >" and "< / style >" tags, but that has not worked ").
  
  Thank you for taking the time to review that and for any help you can give.
  
  

  Hi Vernholio,

  This looks like a problem that is covered in the forums before. Basically, it happens when the Board as a whole has been select. If you click and drag to select all of the cells in the table, then apply the conditional tag, there should not be problems with the rest of the content.

  See excerpt on Peter Grainge's site #69