makeCurrent is not displayed in the table attribute selectionListener

Similar Questions

• Why the names of my chapters are not displayed in the table of contents?

  Hello. I use Indesign & DPS simple editing to make an application. In Indesign, I created several different documents that I used to make items that I put together in a Folio.  I saw it using the tool preview Adobe & on the iPad using Adobe Content Viewer. When I select the button table of contents I see thumbnail screenshots of the first page of each chapter, but no text chapter name.  For each of the documents that I used to make items that I named them after the chapter they represent, which is what I thought each chapter name defined.

  The strange thing is that before I did a couple of test folios and they do not have the name of chapter text. So what can I do to display the chapter name in the table of contents?

  Also, is there a way to change change the thumbnail used by the table of contents?

  Thank you

  The answer to both questions is in the Article Properties dialog box. Select the item in the Folio Builder Panel and choose Properties from the context menu. Specify the name of the chapter of "Title" - which is probably empty now. (There is a difference between an article name and a title of the article. The name is used for internal purposes, such as the binding, and the title appears in the application).

  At the bottom of this dialog box, you see a preview of the Table of contents. Click the folder icon and specify a PNG of 70 x 70 that you design.

• ini_trans and max_trans is not displayed on the tables

  Hi Experts,
  
  When I'm shooting under query, it does not display ini_trans and max_trans. I know that there are some default values are defined by oracle for the latter.
  
  SQL > select table_name, ini_trans, max_trans dba_TABLES where table_name = 'MESSAGE';
  
  TABLE_NAME INI_TRANS MAX_TRANS
  ------------------------------ ---------- ----------
  Message
  
  The complete Table structure is as follows
  ========================
  
  CREATE TABLE "ORCL". "" MESSAGE.
  ('ID' NUMBER (20.0),)
  VARCHAR2 (128) "NAME."
  VARCHAR2 (256) 'CLASSNAME ',.
  VARCHAR2 (1000) "DESCRIPTION."
  'OWNER' NUMBER (10.0).
  VARCHAR2 (64) 'TYPE ',.
  VARCHAR2 (256) "STATE."
  'STATUS' VARCHAR2 (256),
  "CREATEDBY" VARCHAR2 (64).
  "DTTMCREATED" TIMESTAMP (3),
  VARCHAR2 (64) 'LASTUPDATEDBY. "
  "DTTMLASTUPDATED" TIMESTAMP (3),
  VARCHAR2 (64) "INUSEBY."
  NUMBER (20.0) "INUSEID."
  "INUSESINCE" TIMESTAMP (3),
  NUMBER (20.0) 'VERSION',
  NUMBER (20.0) OF 'REVISION ',.
  VARCHAR2 (32) "ARCHIVEDAY."
  VARCHAR2 (64) "APPLREF."
  VARCHAR2 (64) "APPLSTATUS."
  'PRIORITY' NUMBER (10.0).
  NUMBER (20.0) "FORM."
  "FORMNAME" VARCHAR2 (128).
  NUMBER (1.0) "PLEASE."
  'SERVICE' NUMBER (20.0).
  VARCHAR2 (128) "SERVICENAME."
  'STAGE' VARCHAR2 (64).
  NUMBER (10,0) "STAGEINDEX."
  NUMBER (1.0) "STAGEREVERSE."
  VARCHAR2 (256) "STAGECOMPLETE."
  VARCHAR2 (256) "STAGEREQUIRED."
  VARCHAR2 (256) "STAGENEWTRANSACTION."
  VARCHAR2 (256) "STAGESTP."
  "PRIORITYGROUP' VARCHAR2 (32),
  "INSTANCEID" NUMBER (10.0).
  "DTMC' TIMESTAMP (3),
  'MESSAGE_PK' CONSTRAINT PRIMARY KEY ('ID', 'ARCHIVEDAY')
  USING INDEX PCTFREE, INITRANS 10 2 MAXTRANS 255
  STORAGE)
  LOCAL DEFAULT USER_TABLES)
  (PARTITION "PART_FUTURE"
  PCTFREE, INITRANS 10 2 MAXTRANS 255
  STORAGE (INITIAL 131072 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645)
  PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 DEFAULT USER_TABLES)
  TABLESPACE "STP_DATA."
  PARTITION "PART_DEFAULT."
  PCTFREE, INITRANS 10 2 MAXTRANS 255
  STORAGE (INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645)
  PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 DEFAULT USER_TABLES)
  ENABLE TABLESPACE "STP_DATA")
  ) PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255
  STORAGE)
  DEFAULT USER_TABLES)
  TABLESPACE "STP_DATA".
  LIST PARTITION ("ARCHIVEDAY")
  (PARTITION 'PART_FUTURE' VALUES ('0'))
  PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255
  STORAGE (INITIAL 2097152 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645)
  PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 DEFAULT USER_TABLES)
  TABLESPACE "STP_DATA," NOCOMPRESS
  "PART_DEFAULT" PARTITION VALUES ("1", null)
  PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255
  STORAGE (INITIAL 458752 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645)
  PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 DEFAULT USER_TABLES)
  LINE ENABLE TABLESPACE "STP_DATA" NOCOMPRESS MOVEMENT)
  
  Could you please let me know why Oracle is not showing don't not its default values? Oracle version is 11.1.0.7.0

  It is a partitioned table. Check DBA_TAB_PARTITIONS. INI_TRANS and MAX_TRANS are defined in the partition/subpartition upin and if necessary.

  Thank you
  Joy

• Popup do not insert in the table and not refreshing called page...

  Greetings
  
  
  
  Environment: APEX 3.1.1.00.09 on AIX 5.3 with 10 gr 2
  
  
  
  I read a lot of threads about my question and I think I'm getting closer to the answer but in some sort have combined a too big number of suggestions and am tripping over my own code.
  
  
  
  Please look at my sample application on apex.oracle.com:
  
  
  
  Workspace: galway
  
  User: gwicke
  
  Password: gwicke
  
  
  
  Please start by Page3, select any agency and then click on "add a new contract."
  
  There are currently a label "BOLD" < facilities > < strong > 'Add new Builder' which is a link that should open a popup window. Type a name in the field, and then click 'Create Builder'. This should INSERT the row into the table builder, close the pop-up window, assign the new name of the generator to the item page calling "Name Builder" and fill the screen element.
  
  
  
  In current state, the application will open the pop-up, allow entry and close by clicking on the button "create Builder." However, the new constructor is NOT inserted into the table and the calling page element is not met.
  
  
  
  Looking at the Page elements and Session State, I can see the correct values assigned to the elements "Pn_BULDER_NAME" on the popup page (4) and the calling page (2), but the value does not appear on the screen.
  
  
  
  I read here where there really two parallel universes, not forgiveness, Articles of two versions of the screen, a State of Session and the other which is displayed in the browser and there are measures to be taken to be sure that is displayed is updated to state of Session I want in this case.
  
  
  
  I entered the Javascript code on Page4 - header to set the 'passBack2()' function and the code in the section "Option URL Redirect" to the button "Add Builder" if all goes well perform protocol ARP for the INSERT, assign items to page 2 and close the pop-up window. He gets not quite everything.
  
  
  
  Any helpp is greatly appreciated. Thanks to Dene for most of the suggestions I have followed by code.
  
  
  
  -gary

  Hi Gary,.

  I think that there is a very simple solution to this topic - is not this spot really last night.

  First, Yes, you could use a "button" to manage the call for the popup - make sure that the button is a type of URL 'button', which is actually an A tag with the appeal under target URL. Otherwise, you could take you existing a tag and use the same class for one of your buttons attribute because this should make it look like a button.

  More importantly, however, I think we could do as:

  1. on your call popup page 2, clear cache for page 4 (the popup page) - I already did in your application by updating the url

  2. on page popup, allow the user to enter their desired P4_BUILDER_NAME value (not sure if you want to do something to make it unique?)

  3 let the user click on create on the shortcut menu. He will submit the page, that will make your P4_BUILDER_RANK (pk) value and insert a new record in the table (you might consider the creation of a sequence and a trigger to handle the creation of new value PK?).

  4 - assuming that the P4_BUILDER_RANK then exist (it would not if there is a mistake somewhere), then conditionally display a region that had a piece of javascript submit page 2 and closes then itself - we don't need to move everything back to page 2 (see below)

  5. as the P4_BUILDER_NAME and the P4_BUILDER_RANK exist in the session, to which page 2 be reloaded, (A) the selection list should be updated with the new generator (still not sure why all my entries appeared downstairs instead of in alphabetical?) and (B) the P2_BUILDER_NAME and the P2_BUILDER_RANK can have Post calculation calculations together (NVL) ((: P4_BUILDER_NAME,: P2_BUILDER_NAME) and NVL (: P4_BUILDER_RANK,: P2_BUILDER_RANK) respectively)-l' effect is, if there are the values stored in the page P4 elements, we use them, otherwise, we use whatever values were in the elements of page P2

  6 - Finally, to stop (5) that happens in all the loading of page 2, you would need to clear the cache of page 4 in as many places as possible - for example, branches for a 2 page or buttons on page 2

  The reason why we cannot pass values back to page 2, it is one of the elements is a list of selection. The value we want to select will appear not on the selection list until the page has been sent. So, we can set the value and submit because the value is not there. We can introduce and define the value, because the javascript don't know when the page has been updated (or, at least, you need an independent mechanism to identify, which can get complicated).

  So, in other words, as long as we know that if the values are in the session, we can use Post calculation calculations to set our fields to these values. The only thing to keep in mind is that we must ensure that these session values only exist when in need - so we empty the cache. This principle should work for any type of terrain - but as you have no doubt seen, simple text fields can be updated by the popup directly as the field must accept any value that we give.

  My only recommendation would be to completely remove the MRU of the page process because they are not necessary (they simply confuse the issue) and you could make your fetch PK and record insert into a single process - just to keep things clean and tidy, you understand!

  When I finished last night with your app, I will leave so that javascript can create an option on the select list, and then set the value. But the method described above seems to be much simpler.

  Andy

• Window search/TOC not displayed in the output of WebHelp Pro

  Robohelp10, WebHelp Pro-

  I have what I think is quite fundamental question: when I generate my WebHelp Pro project, everything works perfectly until I have move the contents of the output folder to a network drive for viewing. When the default theme opens, rather than display the table of contents/search on the left, I get a link that says "view". Click on this link, and the table of contents opens on the right.

  

  I would like to have the table of contents displayed on this initial point of view, without requiring users to click on the link 'display '.

  Yet once, when I check the output results on my local drive, the table of contents appears. The obvious problem is generated using must reside on a network drive to be viewed by our users...

  PS: The project is on my local drive, only the contents of the output folder is moved to the network drive. In addition, any display of the table of contents seems to work very well.

  Any ideas would be greatly appreciated.

  -lcarey

  Larry, Rick has solved your problem of conditional compilation. However, make sure you have all updates installed for 10 of RoboHelp.

  Issues in RoboHelp WebHelp versions 10 and 11

  I noticed that you are using IE. The link display occur with Chrome or Firefox as well?

  Meanwhile, I'm still suspect that you do not open the good 'default' start the page file to start the WebHelp and that's why you get this link 'Show '. It's 'witness' that you open the file in default theme instead of the default Start Page. By any chance have somehow named "the topic of your default", index.html? If so, this is not correct.

  

  

  John

• a key for the table does not exist in the table

  Hi guys,.
  
  I imported several tables of physical layer in the administration tool. So, I want to do new foreign key between tables join in the physical schema.
  Required fields for posting a link between these tables are set up. When I press the ok button, an error message is displayed:
  "a key corresponding to the table does not exist in the table blablabla. You want to create a? »
  
  In fact, what is this error? I don't have all the idea about it. The number of the type of the fields is the same, the names are also the same. I think that he should not have problems to make the new foreign key. But why is it happening?
  
  Thank you

  Hello

  It is the primary key of the first table. You might not have set this column as the primary key of this table at the level of the db.

  Thank you
  Imtiaz.

• WebHelp, view a topic that is not present in the table of contents

  Hello

  I'm working on RH8. I use multiple TOC and created a table of contents with only the first 4 chapters. After having generated the WebHelp by using that FAKE, even if I look for a subject that did not exist in the table of contents, I can see the help.

  Ideally, if the topic is not added to the table of contents, should not be displayed even if someone searches for it.

  Please help me with this.

  Looks like you expect the table of contents to control what is in the construction and it's not the way it works. It is simply the pointer on key issues, which may need to support the topics where you wouldn't wish that the user to start and that might clutter up the table of contents.

  What you see, it's the way it is supposed to work and how a HAT I've seen. The table of contents indicates what you want to highlight, the search finds all that is in the build.

  You can use exclude research in properties, introduced in RH8. In this way the subject is in the build-up but not searchable.

  If you don't want certain topics, use TCC to exclude.

  See www.grainge.org for creating tips and RoboHelp

• Newly added column is not displayed in the interactive report

  Hello
  
  I have a tableA with 3 columns. In the application I view as form with region as interactive report (Oracle 10 g Application Express 3.2) report.
  
  I added a column for tableA.Now when I'm refreshing the report by adding this column in the select query, the new added column is not displayed in the application.
  
  How can I do this so that the added column can be displayed. I don't want to delete it all and do it again.
  
  Thank you
  Siya

  Hello

  Run the application and select the columns in the report menu interactive action.
  Save the layout by default if you always see these columns

  BR, Jari

• Change the timestamp display in the table of FY

  Hello
  
  I use JDev 11.1.1.1.0
  
  I have a dynamic chart that shows data from several features of ejb, determined by a selectOneChoice. Some entities have attributes of Timestamp. When an entity is displayed in the table, only the date format is displayed for timestamp attributes. I want that it also displays the time. How can I do this?
  
  Thank you
  André

  Hi Andre,

  To display the date and both times, you must set the property type of the tag of the converter as "both".

  Try this:

  Jean Lou

• I get emails with pictures and when I send them to others. they open them but the images are not displayed. The photos are there when I send them. Thank you

  I get emails with pictures and when I send them to others. they open
  their place but the images are not displayed. The photos are there when I send a
  them. Thank you

  Make sure that your security software (antivirus) is not blocking attachments.

• Number of unread messages not displayed against the message icon

  Product name: Iphone 5

  Storage capacity: 16 GB

  iOS 9.3.1

  Problem: Number of unread messages not displayed against the message icon. Can someone help me please.

  Already done troubleshooting: "The application of the badge icon" is running in the center of Notifications. Also restarted my phone several times

  Disconnect from the iMessage by settings - Messages - iMessage - OFF

  Disconnect from the iCloud

  Sign up for iPhone

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  Sign back into it

• Firefox will not display on the screen even though with Process Explorer, I see active Firefox.exe but no CPU usage

  I use Firefox as default browser v10.0.2 on Dell XPS8300 Intel Core i5 and Windows 7 Ultimate and Compaq Presario CQ57 IO IO Intel Core i3 and Windows 7 Home. More frequently on the (approximately 90% of attempts) that Dell (50% of attempts) Firefox will not display on the screen when I click the icon. Cannot display other programs when it happens. I expressly say display because I believe that Firefox has started. To work around the problem, I installed Process Explorer on both machines and launch this program first, then click on the Firefox icon. When the problem occurs I see process Firefox.exe in the list of processes; some CPU consumed but, then, no CPU activity. If I click on the Firefox icon, yet another process opens in the list of processes, but with the same answer - some consumed CPU and then no CPU activity. If I have 2 processes running and kill the process from the 1st, the 2nd poster and then everything is normal. If I do not open it treat a 2nd, but kill the 1st process then click the Firefox Firefox is displayed and all then is normal. This problem has occurred since the original on the two new machines installation. I have updated the video drivers on both computers.

  OK, let's see if we can solve this problem and make it work for you!

  First of all, if you start Firefox in safe mode (restart your computer first, then when you open Firefox, hold down the SHIFT key) it starts more reliable? This is usually caused by a defective module. If this does not help, then restart Firefox, go to the Firefox, then add-ons button and disable your extensions one by one until you find the troublemaker.

  Also, try to update to Firefox 11, it has several bug fixes that might make life easier here.

  Just as a few troubleshooting steps base to ensure that we have all the bases covered,
  Run all Windows updates, install all required service packs, etc.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help!

  I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help! I've tried everything. Google it. Searched through itunes, etc. It MUST be a bug, because it started right after I accepted the 12.3.3 update on my laptop running Windows 7 32.

  I count on the part of the main screen, which is not. Its strange. PLEASE HELP ME! In addition to the main page of the Itunes Store, everything else works fine as before. Music from my library work screens, etc.

  I also have exactly the same problem since the last update. Tried to find a way to solve the problem but no luck. Someone please help!

• In the attached VI I do not understand why given domestic business structures are not transferred in the table.

  In the attached VI I do not understand why given domestic business structures are not transferred in the table.

  Thank you.

  The VI has yet InfoCluster.ctl.

  If you don't bring anything in the cluster, you should always pass the cluster via.  You run the same question ' use default if Unwired "as before.  The presence of these "case bundleless" begs the question why you have these States because they do nothing.

• Volume icon is not displayed in the notification area in the Windows XP machine.

  Original title: Volume control.

  The icon that appears in my system volume taskbar is no where is easy to make adjustments of volume control a chore. Not what I want to do. What can I do to fix this?

  Hi ckhere,

  You did it all change hardware or software on your machine before this problem?

  Adding to the suggestion of ALEXANDER22, you can follow other steps suggested in this link.

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.