Making sure that I understand Appassure encryption for data replication

Similar Questions

• error: implicit declaration of function 'GetActiveProcessorCount' is not valid in C99. Make sure that you include the prototype for the function.

  I get the following error:

  error: implicit declaration of function 'GetActiveProcessorCount' is not valid in C99. Make sure that you include the prototype for the function.

  I've included windows.h

  which includes winbase.h

  Winbase.h contains the prototype for the function in the above error message.

  If I disable 'Require the function prototypes' and 'Building with the C99 extensions', I get the following error:

  error: Undefined symbol "_GetActiveProcessorCount" referenced in "c:\Users\Public\Documents\National Instruments\CVI\HDLC\cvibuild. HDLC_RandD\Debug\HDLC_RandD.obj ".

  I work in the ICB 2013 SP2.

  Why I get this error.

  This function is only valid in Windows 7 and later versions. Because the ICB 2013 still supports Windows XP, this feature is excluded by default from Windows headers that are provided with CVI. If you do not need to worry about the versions of Windows prior to Windows 7, however, you can include it yourself, by adding the following macro in the dialog box options generation CVI (be sure to include for all configurations):

  

• Kickstart paranoia... How can I be sure that it is not wipe my data stores?

  Hi guys,.

  I'll put up an environment of kickstart for our ESX 3.5 ESX 4 migration.

  My startup script is fine and tested to be OK on a single server without san connectivity.

  My question is...

  How can I be sure that the kickstart not wipe my data stores? Therecommendation is out the fiber cables when you perform a reinstall.

  But it's not convenient for us and so we could go back to manual reinstall or if we need to tinker with would invest it san.

  We want to do a complete reinstall to ensure that all hosts are configured in the same way.

  Here is the part of the 'part' of our kickstart script. Any help much appreciated, thanks!

  I need the overwritevmfs because there is a local vmfs on each esx. Nothing useful to save them here.

  bootloader - location = mbr - driveorder = cciss/c0d0

  clearpart - overwritevmfs - discs = cciss/c0d0

  part/boot - fstype = ext3 - size = 1100 - ondisk = cciss/c0d0

  No part - fstype = vmkcore - size = 110 - ondisk = cciss/c0d0

  part local - fstype = vmfs3 - size = 8764 - grow - ondisk = cciss/c0d0

  VirtualDisk esxconsole - size = 7764 - onvmfs = local

  party swap - fstype = swap - size = 760 - onvirtualdisk = "esxconsole".

  part/var/log - fstype = ext3 - size = 2000 - onvirtualdisk = "esxconsole".

  part / - fstype = ext3 - size = 5000 - push - onvirtualdisk = "esxconsole".

  One way could be to remove the drivers of SAN in the initrd.img and rebuild. It worked for me with ESX 3.5.

  Maybe this will help: http://lubatti.eu/index.php/lang-en/tipsandtricks/1-esx/3-stoploosingyourvmfs

  -Pedo mellon a Lynn -.

• How can I be sure that all the pictures selected for export (all 1600) have been exported to my backup drive (before I remove them on the Mac)

  I want to be sure that all of my 1600 + photos and movies were actually exported to the Seagate backup drive that I installed on my MacbookAir. How can I know it?

  If they have been exported to a single file on the EHD?  And if you have exported them should have exported them as "Original unmodified" in order to get the original video files and not a jpeg thumbnail.

  The best solution, if the Seagate HD is formatted for OS X Extended (journaled) is to save the photo library so that you keep both both original and edited, all projects and metadata (keywords, titles, faces, places, etc.).

  

• How can I make sure that I am not charged for ALL the stuff of cloud?  And please explain to this OLD duffer... How to get the clouds out!

  How do I completely get out of theClouds AND make sure that I'm not going to be charged?

  Hello

  The Adobe Id on the forums has no assets CC membership/registration under him.

  You are not charged for any subscription of cloud under this Adobe ID

  Kind regards

  Sheena

• Passing a unique structure through the functions of customer/ServerTCPRead/write and making sure that all data is transferred

  I use the CVI TCP media kit at my request and I am curious about the following code:

  ClientTCPRead

  char * buffer;
  int messageSize;
  int bytesToRead;
  int
  bytesRead;

  / * Find messageSize and allocate a buffer properly... * /.

  bytesToRead = messageSize;

  While (bytesToRead > 0)

  {

  bytesRead = ClientTCPRead (connection handle,
  (& buffer [messageSize - bytesToRead], bytesToRead, 0);

  bytesToRead = bytesRead;

  }

  OK, this works if you tank elements of the array, but what happens if you pass a structure of arbitrary size?  If you read/write the bytes read or written and that you get all the data that you have asked, what do you do at this point to get the rest of subsequent data?  For example, replace the "buffer" of type char with a structure of a type defined by the user with a size of 100 bytes or something to that extent.  You make a request for read/write and read/wrote less than 100 bytes.  How do you get the rest of the data?  ICB doing something in the background?  I could use this code with several structures, but then again, a particular Member of a structure is not the size of a byte as a tank.

  Much appreciated,

  Chris

  The solution is to use a pointer to char sunk to allocate the data transmitted.  The only problem is that this buffer must be a pointer to the data type of the structure before a tank troop can be used for a successful program compilation. Thank you for your help.

  Chris

• How to make sure that DW shows text color for a file type?

  Hello
  I work with ".inc" file, I include in the PHP files.
  At that time just DW displays all text as black .inc files. How can I get DW to distinguish the text (as it does with other files such as html or php) so that I can make it easier to read?
  See you soon!

  http://www.Macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_16410

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "chuckee" wrote in message
  News:fb6cdb$MNO$1@forums. Macromedia.com...
  > Thanks for that, but I didn't want to keep the file with the extension .inc.
  > In the back of my mind, I thought he wet his some I could change if
  > DW recognized new types of files.

• My 3.6.14 keeps trying to update and gives this error message: "the update could not be installed. Please make sure that there are no other copies of Firefox running on your computer and restart Firefox to try again. »

  My OS is Windows XP service pack 3 version. I even tried to install FF4 but he never settle. As I mentioned my FF continues to try to update, but it gives the error message that I set out in the title. Now I don't have access to my FF browser and my life stopped because I have all my saved passwords on FF. I restarted my laptop but it stills try to update himself giving the same error message. I can not also improved my Adobe reader 7.0.7-10 I tried more than 10 times, but it is never up to date. I had this problem Adobe for a long time.

  Run the program Firefox once as an administrator (right click: run as administrator).
  
  If this does not help, then do a clean reinstall.

  Do a clean install (re)-:

  • Download a new copy of Firefox and save the file to the desktop.
  • http://www.Mozilla.com/Firefox/all.html
  • Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
  • Do not erase personal data if you uninstall the current version.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored elsewhere (not in the Firefox program folder) and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• Make sure that 'tour windows xp' appear again for a specific user

  When I create a new account, a little balloon appears in the bottom right of the screen next to the notification area that says 'Windows XP Tour'. After awhile, she disappears.

  Is it possible to bring it back and make it stay there all the time? How could I do? There must be a registry setting that keeps track of the amount of time since an account was created or how many connections, so how can I change it to always do this prompt? Can I use an editor hex old-fashioned thus.

  I have an old relative who keeps forgetting basic skills such as how to reduce a window, the use of the taskbar and sometimes forget that the large list of programs are now under 'all programs' (although I solved it using the start menu classic.) I don't know what I'll do when she gets a new machine with Windows 8, since this feature has been removed in 7). I'm tired of always prompting you to go to start-> all programs-> Accessories-> windows XP of the Tower, and I tried to add an icon on the desktop. I want just the reminder it so she can click it before calling me for really basic things I taught him a dozen years with his Windows 98 computer. This seems to happen more frequently, and I noticed that she is 'slide' into other things as well, so I'll try to make up for it.

  P.S. I'm not sure which category I should be put under. I settled on "ease of access" because I try to help and an elderly woman in her late 90s access her computer when she keeps forgetting the basic skills. The tour is... temporarily.

  Hi SlickRBCD,

  If I understand correctly you have a problem with guided tour of Windows XP still appearing on specific users. Do not worry, I'm here to help you with this question.

  Let us try the following steps and check if it works for you.

  1. Start the registry (Regedit.exe) editor.
  2. Locate and click the following key in the registry:
     HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\Tour
  3. On the Edit menu, point to new, click Dword value, type RunCount, set the data value 1 (one) and then click OK.
  4. Exit the registry editor.

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

  Please answer if the steps do not have hepl, so that we could help you better.

• Deployment of sbRIO 9606 chassis LabVIEW (sbRIO-9606): (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  Hi guys,.

  I have problems getting my sbRIO 9606 to deploy.

  Everything's fine until during the deployment process, I get this:

  Deployment of sbRIO 9606 chassis (sbRIO-9606)
  LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.

  I tried to reinstall LV (ensuring that FPGA & RT deployment options are checked) and the 9606 software shipped, but it made no difference. I'm still waiting my next serial key by NOR, I have to wait that I recorded it before I can deploy?

  Please find attached the screenshots of my:

  • License Manager OR
  • Overview of the 9606 MAX
  • My project folder
  • Dialog box deployment where the error is displayed.

  -Adam

  Hi Tim,.

  In time real 11 is installed according to the recommended software battery installation program included on the disc NEITHER RIO provided in the starter pack.

  The problem is that the recommended Software NI Scan Engine 3.0 installation program.

  The sbRIO 9606 does not support scanning engine.

  Once the scanning engine support has been uninstalled, I could deploy on my 9606.

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I just upgraded to the Plan complete creative Cloud, but I also had a plan of individual photo, the upgrade to the PAC will cancel the individual level, or what I have to cancel and how can I make sure that I do not get penalized for cancellation?

  I just upgraded to the Plan complete creative Cloud, but I also had a plan of individual photo, the upgrade to the PAC will cancel the individual level, or what I have to cancel and how can I make sure that I do not get penalized for cancellation?

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  First of all, such that added to your message of origin by a Mod, please do not post the same question twice

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <==> NOTE DAYS AND TIME

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• popular error; An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  Once again; same problem, others have encountered but nothing seems to work.

  An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated

  1 physical servers

  -Internal IP address; 172.16.160.21
  -FARM Firewall

  vCenter Server

  -Internal IP address; 172.16.1.85

  -Local Office (ALX)

  Location of destination (ESXi host):

  -Internal IP address; 172.16.153.20

  -Firewall ROOMMATE

  
  Already completed:

  VMware KB: disable SSL on VMware Converter Standalone 5.x encryption   SSL disabled in converter-worker

  Firewall are open / Tunnel is open throughout the environment.

  I have attached the logs.

  Thank you very much

  POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?

• How do I encrypt a data file so that only I can retrieve the Info?

  How do I encrypt a data file so that it cannot be read without permission?

  I have a request where the client shouldn't have access to the data that I need to save for troubleshooting purposes.  (there are trade secrets, I want to protect)  My plan is to save a datalog (currently I produce a Spreadsheet tabs-delimited format) whenever the device is running and hide the files where they will not likely be found.  But some sort of encryption or everything at least password protection would be better.

  I never tried to do this before, but thought it would be pretty easy.  Maybe I'm looking all just not in the right places.

  Thank you

  Well, you could look in something like DES, Triple, ESA, etc.  It has libries lying since these writings in LabVIEW.  I'm not sure about the cost.

  If you want a very simple way to protect your data, just reverse all or part of the bits in each byte of the file.  It's super simple and turns a nice ASCII text file noise when read from a text file.

• Where can I find the hexadecimal encryption for the router?

  original title: WIRELESS IS ASKING for HEX ENCRYPTION WHERE I would NORMALLY PUT the PASSWORD

  My toshiba satellite pro 4600 when I entered the password, he said I was connected but didn't have no internet.  the signal strength is good... and the rest of my computers work properly.  I wonder if the encryption for the new router I'm not in the HEX code like I did in 'time' once, I entered a real password.  is there a screen somewhere in the router configuration that shows the translation of the password for the real hex/bit encryption?

  Thank you

  It is useless to ask technical questions in the forum Feedback so I moved your message on the forum 'Making in network and get online' Windows.  However, you neglected to mention your version of Windows.  Please provide that.

  Your router provided with documentation that describes the values by factory default, including encryption.  Most routers have no active encryption when fresh from the factory.