Making the one-upmanship of noise

Similar Questions

• When I turn my on my HP Officejet 6110 all in one, it makes noises like a rattling of the belt.

  When I turn my on my HP Officejet 6110 all in one, it makes noises like a rattling of the belt.

  [Moved from comments]

  Check with HP tech support to see what your options are.  This is not a Microsoft or issue of Windows.

• HP envy 15-u111dx 360 x: no one knows the reason for this noise?

  I opened my first hp envy 15-u111dx 360 x last week. After a day of use, I realized that the laptop is decently loud "ticking" noise. It does not sound entirely mechanical, more as a noise type modem cable except worse. It comes from the right side of the base of the laptop near where is the LED on the hard drive. I returned it today in Exchange for a laptop brand new of the same model. It makes the noise as well. I'm paranoid, either there is a problem with most laptops. No to geeksquad guys had never heard this noise before. It is NOT the fan. It is closer to the sound of a hard drive is no exception because it is not a pattern. It only happens during tasks and the heavier workload the stronger and more frequent noise becomes. So this led me and workers to buy better believe that's a bad treatment. This notebook is an i7 with 12 GB of ram so I am very appreciative of this incredible machine but this noise makes me a bit tired of this laptop. Is it a bad sound or each i7 makes noises? Hard disks make this noise? All comments are appreciated unless you say it could be the fan, because it is not. The fan is the other side of the laptop. Thank you.

  Hello @schmittycity,

  Thank you for your quick response!

  From what you have said on the Geek Squad, I don't think that it is a normal sound of the unit.  The only moving parts of your laptop that can be the cause of this noise, it's the hard drive, the fan and the heat sink.  Remove the cover to replace a hard drive or memory, with HP parts, should not void the warranty, as long as there is no damage seen the hardware or the lid.  You can also check to make sure that there are no loose screws.

  If the noise is abnormal, the best solution may be to return the device, or contact HP as previously posted.

  I hope this helps!

  Have a great weekend!

• How do you keep the guests on their hosts (no migration) by making the food stops.

  I apologize in advance for the length of this post.

  In general do not much poster, but a lot of reading.  First of all, let me tell you that I'm not a GURU PowerCLI, never written one in my life, but there is always a first time.

  Background:

  Under VMWare 4.1, that us did not run with HA, for whatever the reason why I don't know.  We had (our UPS manufacturer) Liebert software called MultiLink that when there was a power outage after 15 minutes would run a .bat file on the server vCenter for windows that would log on to the vmware host and run a file .sh that accumulate all the machines on the host and start making judgments on them.  Once completed the host itself would make a stop.

  Currently:

  Improved 5.5 VMWare vCenter, have HA and followed now host active in the configuration. We find that we can follow is no longer the practice that we have done less than 4.1.

  I got a new version 4.2.4 and that it contains, there is provision in interface with VMWare through the PowerCLI and it stops all guests on the host computer. The host then stops.

  I suspect STRONGLY that when the command is issued to stop the host itself, HA or monitoring kick and migrates customers and/or models out of the machine, before the machine shutsdown.  In the first tests, I had a host with 5 models, 1 windows machine and a Virtual Appliance on it.  Everything was arrested, as was that it was supposed to, but the host was brought back to the top he had nothing on it.  Models and machines had been moved (spread) for the two other machines.

  This has been confirmed in another test on 01/05/2015 through vCenter client connection, the guests have been stop, the by refreshing the screen you could see the machines leave the test machine, then the server itself, stop.  In a subsequent test, I commented on the "Shutdown the ESX hosts" part and the machine down and remained where they were.  So I'm guessing that it has something to do with HA, surveillance or other thing that needs to be defined differently for him to stop guests from the host, stop the host, BUT not to migrate comments to others running machines.  Do I need to enter the maintenance or standby mode before making the shutdown command?

  Any help would be greatly appreciated.

  You can avoid the confirmation prompt by adding the -confirm: $false pass.

  What follows will check all clusters and those where the priority of restarting is not disabled, is set to disabled.

  Get-Cluster |

  where {'ClusterRestartPriority', 'High', 'Medium', 'Low' - contains $_.} HARestartPriority} |

  HARestartPriority-set off Cluster - confirm: $false

  In this way, HA will continue to function (for ESXi other nodes in the cluster), but virtual machines will remain on the crux of ESXi, you stop.

• Strange problem after making the extension of the detector

  PDF file works well in making the extension of the right detector. After the extension of the sensor on the right, a single page is automatically created double.

  I can't understand why the page became double. I've been analyzing with debuger xfa. All properties of the same page but page2 is created twice.

  https://DL.dropbox.com/u/70850345/print/xfaDebuger.jpg

  I also moved page 3 next to page 1. Then page3 is created twice after the extension of the right detector.

  Do you know why this page is created in double?

  Hello

  There are several bugs you form, which is really "complicated."

  Most is allowed page breaks for subforms where you did not allow page breaks for the parent of the objects (surrounding subforms or pages).

  You set also several fluid subforms so that the surrounding page set are positioned.

  I have corrected some of the problems, but not all, as I didn't have the time.

  The next thing that I don't understand are the many masterpages that have almost the same content.

  You will need only one. Everything else can be placed on the pages of body.

  In fact, you should also only a page of unique body which is floating up-down and allows page breaks.

  Here you can place all subforms that you currently defined as unique pages.

  https://Acrobat.com/?d=pvrhlCnYZtnhkY8HAi7GwA

• Now that my full FCP project, I burned a dvd and everything is fine but I want to download the .mov on YouTube, but cannot determine WHICH of the largest number is the one to download.  Too many files are named "Untitled" and I can't find a post of .mov

  Now that my project from FCP 5 minutes video clip is over, even if I am a complete and total novice to the iMac, I nevertheless managed burned a DVD via the file > share the menu option and everything went well, but now I want to download the .mov on YouTube, but is unable to determine to WHICH many files created in this project is the one to download!  It seems that many files are named "Untitled" and I do not seem to know how to find ONE with a .mov extension.

  At the top left of my screen of the FCP is the list of "Libraries" that after that I developed all the arrows to point down looks like this:

  Libraries

  Untitled

  Smart collections

  30/06/16

  Age of television

  If you haven't guessed, the name of my project is "T.V. Age" and I expected to find somewhere on the computer, a file named, 'T.V. Age.mov' or somethjng like that for me to download on YouTube, but I can't find THE .mov files.  Maybe I don't know how to market the Finder option to display filenames WITH extensions?

  I'm hoping that someone with enough time on their hands and understanding in their hearts will take the time to help me locate the .mov that as well as help me correctly name this library Untitled in the zone without good libraries course disrupt the integrity of the completed video-music that is always open on the timeline, even if I don't there anymore since my work with her is over , but the only "CLOSE button" I see is 'close library Untitled' button on the file menu.  I don't see even its end (the *) project button!  The only way I see how close my project is to close the program, but I doubt if it's true.  Any help will be greatly appreciated.

  Tony

  If you did burn a DVD, then you did burn a DVD, you export any file can be used.  Share > main folder > Audio + video and download that ProRes file resulting.  Or use the built-in YouTube option to upload directly to YouTube.

  You don't "close" anything in the part of the timeline, it is useless.  You would simply open a new project or other media type of container, in the part of the timeline.

• All of a sudden, the Yahoo homepage is different with Firefox. How to bring back the old home page? I prefer the one that is always displayed on Internet Explorer

  All of a sudden, the Yahoo homepage is different with Firefox. How to bring back the old home page? I prefer the one that is always displayed on Internet Explorer. I deleted Firefox and re-installed but the rest of the problem. Help, please.

  Well, it's a problem in your Firefox. To me this https://www.yahoo.com/ page looks like the screenshot of IE.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Click the menu button

     

     , choose historic, then on clear recent history...

  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

• older versions gave a list of cookies on the computer so I could choose the ones I wanted to keep. Is it possible to do this in version 12 of firefox? I can't find.

  I just got a new laptop with Win7 and downloaded Friefox 12. On my old computer with Win xp and the old version of firefox, tab tools./options/cookies, I could see cookies and delete the ones that I didn't keep and keep those I wanted. I looked everywhere on v12 and all I can find is to remove everything. I can 't even find a file on win7 where cookies are stored. Is it possible to implement the v12 to allow me to keep the cookies I want?

  To see all the history settings and cookies, select:

  • Tools > Options > privacy > History: Firefox will be: "use the custom settings for history".
  • https://support.Mozilla.org/KB/Options+window+-+Privacy+panel
  • http://KB.mozillazine.org/cookies

  See also clear recent history:

  • https://support.Mozilla.org/KB/clear+recent+history

• The applications listed under Launchpad, is there a way I can delete the ones I don't use on my MAC Air?

  The applications listed under Launchpad, is there a way I can delete the ones I don't use on my MAC Air? I hope that I can free up space.

  Start the LaunchPad and hold the option key. The icons will start to shake and an X will appear in the upper corner of some but not all. Click the X to remove the application. Programs that have an X are only purchased/downloaded from the App Store. Integrated programs in Mac OS (like Safari) or programs you have downloaded/purchased elsewhere will not be a X. You should not delete (or move) programs such as Safari and Mail (built-in programs) because the update from Apple guess they were be on your computer in their installation location. Weird things happen if they are moved or deleted.

  Programs you don't purchase/download from the App Store can be deleted without the help of the dashboard, but you must be careful about this. Third party programs can be installed in different ways: some come in disk images and are trained in your application forms. These can be moved without danger in the trash. Some are installed using an installation program, and these require a little care to remove. In some cases, they set up items in addition to the program and require a special uninstall program, but this is not true in all cases. I always do the note of programs using a Setup program, so I can make sure I have properly uninstall.

• How to open a project in FCPX 10.2.3 of the one who was created in 10.1.4?

  How to open a project in FCPX 10.2.3 of the one who was created in 10.1.4?

  IT must be updated using files of projects and events.

  http://www.fcpxbook.com/updates/101/101libraries.html

• BIOS update solved the Portege M400 fan noise

  The new version of BIOS (1.8) for Portege M400 solves the problem of fan noise. The Readme.txt explains that the temperature will rise only in three degrees. Very important, very recommended patch for users of M400.

  Now I can use my tablet in my business meetings without having to give explanations to customers of the fan noise.

  Greetings.

  Hello Jose

  It is very nice to hear that you are happy now. I read your previous assignments and I can understand you this annoying issue with cooling fan, but now you can see this laptop manufacturer is trying to make the product better, even if the product is on the market.

  I am also certain that customer s comments can help identify the problem if persist und after this systematic search for the solution or change for the better.

• I recently had to have my rebuilt computer caused by a virus. Now I have Mozilla Firefox with ABP and noticed that Mozilla has a built-in phishing and virus program. Do I need another antivirus program and if so, the one that works best with Firefox?

  I recently had to have my rebuilt computer caused by a virus. Now I have Mozilla Firefox with ABP and see that Firefox has a program's built-in phishing and viruses. Do I need a program additional anti-malware? If so, the one that works best with Firefox? Seems put more you on these things the you have more trouble.

  The anti-phishing protection and malware that Firefox uses checks against a list of websites that have been reported to contain a form of malware and then alerts you. Firefox itself does not scan files to see if they contain viruses/malware. You still need a form any anti-virus and anti-malware protection. You must also use a firewall.

  As for which is better, you are likely to get many different answers, it's a topic that generates a lot of discussion. A product one person loves will be hated by someone else. I use Microsoft Security Essentials as well as Windows Firewall.

• Firefox is redirect to sites other than the one clicked on.

  When you click on search sites by using the bar (address bar not) search, you are redirected to one site other than the one you clicked on. It happens not on all sites found, but on a large number of them. However, in all cases where sometimes the site redirected to is [adlinksearch.com]. I use PC Tools Spyware Doctor and it has found no problems with Malware. I can go on the site if I put the address in the address bar. I use igoogle search bar. Please help with this issue, because it is very annoying.

  This has happened

  Each time Firefox opened

  == Unknown as to exactly when he started

  Firefox closes alltogether when you go to youtube videos, not youtube itself. Redirects to other sites. ran malaware and spybot. Any suggestions?

• HP Pavilion dv6-6140tx: HP Pavilion dv6-6140tx cable hard drive (the one that connects HD on motherboard)

  Dear members,

  Asking for your help to find the cable from hard drive HP Pavilion dv6-6140tx (the one that connects the hard drive to the motherboard).

  It seems that the cable must have 7 + 15 pins.

  Please help find the right site to buy this cable. I tried ebay, amazon, etc. to no avail.

  Please consider this as an urgent request and help out me. Thank you

  Kind regards

  Vinciane

  Hello

  You need a good part number otherwise very difficult to find/search. If please use part number for drive on the following link and search. This can help

  http://PartSurfer.HP.com/search.aspx?SearchText=QC339PA

  Kind regards.

• How can I build this cluster? I don't like the one I created (too big)

  Hi everyone, I am working with a Vision VI and the problem is that I need to create a cluster to connect to a terminal called the VI Vision settings (IMAQ County objects). These parameters include the Boolean values of type long and unsigned word. I saw it in a pdf document:

  I like how it looks because it's in a small space.

  

  It's the one I created:

  

  (Please ignore the red numbers 1 and 2)

  And the schema looks like this:

  

  If anyone knows how to do a VI as the first picture, please report it.

  I thank very you much for your answers and comments.

  P.S. I use LabView 2009, maybe some features are not available in versions of newers.

  Right-click the Terminal want control to, and then select Create a control.  This feature is not going in any version of LV