Malware, the Web Bots and Trojans is equal to the fall of DSL speed?
Ive been having some trouble DSL speed and my ISP suggested that my computer had been compromised, so I downloaded Microsoft Security Essentials and of course after a 5 hour scan he found a Trojan horse and removed, although later that night, I continued to have speed issues, the provider advised me to use CMD and run a Netstat to see what was using my DSL if anything. Im not for techies, but I found these lines a bit curious to say the least:
(TCP 192.168.254.1:49263 yx - in - f139:http TIME_WAIT)
TCP 192.168.254.1:49266 lasvegas-nv - UNOFFICIAL datacenter:http
TCP 192.168.254.1:49268 213.174.154.144:http CLOSE_WAIT)
I googled the lasvegas and the yx but I have found no information in their regard. Any help to what they are or how to fix this would be appreciated.
Hello
The suggestion recommended for this problem would be to perform a new installation.
Important: Data and the applications on the computer will be lost after a clean install. Make a backup of your data before performing any installation.
The following steps are worth a try:
Method 1: Disable the firewall (security software) software and then test to see if the problem persists. Follow the steps mentioned in the link below
Enable or disable Windows Firewall
If you use a non-Microsoft security software, you can check the documentation provided with the program to achieve this.
Important:Activate the Security (firewall program) software once everything is done.
Method 2: Put the computer to point earlier in time where everything worked well until the computer has been infected by the virus and then run a virus scan again and check if that makes a difference
Follow the steps mentioned in the link below to complete the restore of the system
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
You can check the link below
Remove spyware from your computer
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit ourMicrosoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Is there a free application to detect the virus and Trojans on my iMac?
I think I have an evil entity of some sort on my computer. It is not malware. Is there a free app to download to search for viruses and Trojan horses to an iMac, OSX 10.9.5?
Thanks for the recommendations.
You don't need anti-virus software and must not install, free or not. They are unnecessary and a waste of your money. If you have advertising software problems:
Remove the browser pop up problems
Malwarebytes | Free Anti-Malware Detection & removal software for
Adblock more 1.8.9, GlimmerBlocker, or AdBloc k
Remove the adware that displays pop-up ads and graphics on your Mac
How to remove adware FlashMall of OS X
Stop advertising and pop-up advertising windows in Safari - Apple Support
-
I used to be able to see the name of the web site, the user name and the password stored in the same time. now, I can see the web site and user or user and word/p but not all at the same time. How can I change it back.
Hello peter102, you can easily resize this dialog at the bottom right...
-
For some reason any bar type appears on Web sites and is not allowing me to use scrolling properly the top and bottom of the page. It is present at each Web site. However, when I switched to another browser it can't.
By pressing F7 solve your problem? (it could be that something called keyboard navigation)
-
I have update my Fire Fox version 25 several months ago. I then started to receive messages from Web sites and my yahoo email account I was using an outdated version. Then, I updated to beta 26 and I still have the same problem. I am using Windows 7 on my PC. Never had any problems with Fire Fox until the 25 upgrade. I deleted the cache and cookies without effect. Should I uninstall Fire Fox and start all over again.
Before Firefox 4.0 a few extensions added stuff to the useragent which can make the AU stay stuck in this version. Your AU seems to be user Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; RV:1.9.2.16) Gecko/20110319 YFF35 Firefox/3.6.16 FBSMTWB
-
Update of Firefox, and now all of the web pages and icons are inflated. How do I put back it as it was?
Hello
Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution.
You can adjust the resolution of your screen.
To change it follow these steps:- Type of topic: config in the Firefox address bar and hit the Enter key.
- If the warning that this might void your warranty , click I'll be careful, I promised.
- Search for layout.css.devPixelsPerPx
- Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.
If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.
If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .
To adjust the font size for the user interface, you can use the extension of theme font & size changer .
This solve your problems? Please report to us!
Thank you.
-
I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.
How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!
How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.
My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.
-
pages Web print and preview empty despite the reset config and confirming the printer is identified
I tried to reset the topic: config and confirmed that my print is correctly identified in the config, and I uninstalled and reinstalled firefox, the two nothing helps. I get the same problem in firefox safe mode.
Hello
If the Web page has a print icon/link you can try to use it. Also, try a right click on the area to print and choose this framework (if the option is present) > Print Frame.
If printing usually worked properly before, you can also reset Firefox and check.
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
-
I have download a scanned receipt on a Web site and I get the error message "the connection was reset". I downloaded these reception for two years and last week, I had to use a different browser to complete this operation. I log onto the site and make the report, I have to do, but I can no longer download on this site.
Safe mode does not work. However, when I downloaded Firefox laptop everything worked. Any suggestions as to where I should go now. Thanks Fire Fox works on other sites I work with. The download has started working. I think the problem was the website.
-
I use iWeb to update a Web site and the objects appear in Safari unless you have a hyperlink when they download. Is it because iWeb can only support a limited number of links, hypertext, or any other reason?
It has been much discussed.
See my solution in this post:
-
trying to enter user name on the Web site and it only accepts one digit at a time
try to open a secure Web site and the user name only accepts one digit. It replaces the 2nd digit, then the 3rd, etc. How do I erase everything that makes that?
Is what site this?
Unfortunately, I am not quite understand your description of what happens.
-
I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?
Hold down the key (key in OSX) and press the following letters in this exact order: V T M
The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.See the other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).
Then, in the Menu bar, go to view-> toolbars-> customize, then press the Restore Default Set .
-
How can I design square wave which has a positive and negative values equal to the other and separated from each other by controlled time or distance, as indicated in the figure below. and enter this signal in a data acquisition.
At the time wherever you go for the beautiful diadram, you could have done the vi
Your DAQ would like a waveform (table of values and dt ak 1/sampling rate)
If you set the sampling rate you know the length of the array, create a matrix of zeros and set the values of the two amplitudes...
Because I don't want to connect other duties here are some photos
And it
does have a few drawbacksleaves to be desired in my solution, just think... rounding errors and what might happen if the tables are becoming more... -
It takes the right drivers for hp w2558hc monitor, is the web cam and microphone and other devices. Now what a windows MS7 is incorrect and when the pc doc runs it says it devive pilot problesm we tried to remove the drivers, that it doesn't always, the only way to solve this is unplu cable webcam, while the device driver goes. It was working OK in vista and when hp gave me free ms7 upgrade, when the errors started. I still have the thing he had trouble even on vista because of the blue projection. MICROSOFT and HP has to happen to get together and put the correct drivers MS7 or update the old was the last time, she was last updated 2006. They sstesm now I have is a 64-bit MS7, we tried everything. It works but it does not just because of the problem of driver and the only way to remedy to the webcam cable monitor unplu when not in service. It gives you 3 errors and it organizations all the internal features of this monitor as a web cam, mic. any suggestions out there?
CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/33d7bcee-b0ed-489b-a15d-c087c421cb55 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
What can I do to remove a box pop up indicating "Message from Web page" and the message reads "object does not support this property or method".
Hello
1 how long have you been faced with this problem?
2 have you made changes on the computer before this problem?
3. when exactly you get this error message?
The following threads may be useful:
http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/message-object-doesn
Maybe you are looking for
-
How to make sure that no one is using our email but we
Hello .We currently bought our business from angie and rob ditzler... .We currently receive its emails and our... being that she used the same email but we currently have for our business. How can we continue to use sales at stonycreekwhitetails dot
-
Amazon says it's a problem of Foxfire because it does not occur when Internet express is used.
-
LabVIEW code for two daq cards
Hi all I'm reading the analog signals using the USB-6210 device and function DAQmx. How to write my code so it would work with the NI USB-6210 or USB-6218 since both a pinout similar devices. Thank you dp128
-
Start button gives only 2 items now: e-mail and internet
Original title: Start menu problem I'm working on my shared computer and the Start button only gives 2 items now: email and internet (since I have done something); all programs still shows everything but the rest of the items in the list no longer ap
-
When I turn on my HP Pavilion Entertainment PC laptop, D: drive does not appear. D drive is not CD/DVD drive. It is the internal hard drive. Has been initially labeled Data (d :)).