Manage log messages in the procedure

Similar Questions

• VB6 DLL is not log messages in the Windows Server 2003 event log when it is called from an ASP page

  Hi all

  I have an ASP web application, I will create a "VBModule1" (VB6 Dll) instance of an ASP page and inside this method of "VBModule1" I create an instance of another VB6 Dll 'VBLogger', who calls App.LogEvent () to write messages to the event log.

  I tested the Web application on the develepoment (XP) machine and everything worked fine but when the user runs the Web application on the Production Server (windows server 2003) events are not saved.

  Friend missing the security settings of my ASP web app that needs to be configured on Windows Server 2003 for VB6 DLLs logging events?

  Please think as soon as POSSIBLE.

  IIS on Windows server 20003 version: 6.0

  Thank you.

  Hello

  The question you have posted is related to Windows Server 2003 would be better suited to the Windows Server community.

  Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How to turn Pix timestamp of the log messages in the buffer

  How can I activate the timestamp of the log 'stamped' PIX messages? I activated the "record timestamp" command that generates timestamps for 'syslogd' messages but my messages saved in the buffer do not have a timestamp on them.

  I'm running ver 6.2 (2) 'warnings of logging in buffered memory ".

  Rgds tony

  Unfortunately you don't have. As you have seen, the "horodateurs log" command the timestamps on the syslog messages, but still put on the console messages.

  There is a bug already open about it, CSCdu18237. No word on when it will be resolved, however.

• Help: Log messages (at the bottom of design ctr scrn) disappeared owb 11.2

  Help
  
  Is it possible to reset the Design Center appearance to the way it was when I installed it first. For example,.
  
  * The Message - Log (the bottom of the Design Center) has completely disappeared and cannot get it back (I've tried view > Journal) (I closed it by mistake)
  
  I tried to play with the preferences (Tools > Preferences > OWB) but it did not help.
  
  Your guide to the new user interface would be appreciated.
  
  Thank you.

  Hello

  Check this box
  http://blogs.Oracle.com/warehousebuilder/2009/11/owb_11gr2_a_new_user_interface_and_how_to_restore_factory_layouts.html

  See you soon
  David

• Managed server starts once the root directory specified.

  Friends,
  
  I am facing a problem when you start the managed server. I've specified the directory root as/var/opt/bea / < DomainName > / < servername > tab to start server in the administration console. I kept running node Manager.
  
  My env details are as below:
  
  BEA HOME page: / opt/bea
  
  AREAS of DIRECTORY: / opt/bea/areas / < DomainName >
  
  
  
  Once I start the server managed from the administration console, the node Manager log becomes with the message as below:
  
  < 04/08/2010 01:00 > < WARNING > < error e/s while reading the directory in the domain: java.io.FileNotFoundException: domain directory "/ var/opt/bea/wl_da_ma_b/wl_ma_mab_0101 ' invalid (field not found salt file) >
  java.io.FileNotFoundException: domain directory "/ var/opt/bea/wl_da_ma_b/wl_ma_mab_0101 ' invalid (file not found salt field)
  at weblogic.nodemanager.server.DomainManager.initialize(DomainManager.java:81)
  to weblogic.nodemanager.server.DomainManager. < init > (DomainManager.java:53)
  at weblogic.nodemanager.server.NMServer.getDomainManager(NMServer.java:252)
  at weblogic.nodemanager.server.Handler.handleDomain(Handler.java:218)
  at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:109)
  at weblogic.nodemanager.server.Handler.run(Handler.java:66)
  at java.lang.Thread.run(Thread.java:619)
  
  
  Please help me on this issue. Am I'm missing anything here.
  
  
  
  Thanks in advance

  In fact up to 7,0 WLS wls always used to create the domain within the BEA dir install dir only.
  but we can specify the directory of area outside the facility of dir BEA WLS 8.1.
  It's the only relevance for the different directory for a domain you can specify the domain root dir anywhere on the file system.

  Now the root directory server the only relevance to the root directory of the server is different from the root dir field is when you have your domain distributed on different machines.
  For example: If you have a domain with a server and administrator on a Machine and a server run on the B Machine.
  Then you can't have root directory of the managed server, the directory of the domain as the root directory of the domain will reside on computer A and Managed Server Root Dir will reside on the Machine B.

  And if you start the managed using the node Manager server and that you have not specified that the directory root of the Managed Server through the java_option then by default the root directory of the managed server will be created with in the nodemanager/common/WLS_HOME directory on computer B.

  And if you managed servers in different domains on the same Machine B therefore all managed servers by default their directories root within the nodemanager dir which will make it difficult to recognize what managed server belongs to what field.

  Therefore, it is always recommended to have specific server root directories if the field is distributed on several machines.

  Hopefully this will clear your queries.
  Thank you
  Sandeep

• the procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  Hello

  While trying to install a program, I see the following on the screen error message:

  The procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  The I set him, is a Windows XP 32-bit environment.

  The I am installing, is a program, created by my own company, using a 32-bit self-extracting installer, which is also created by my own business using InstallAnywhere Flexera software.

  No changes were made on the environment of the installers.

  No change seems is done on the environment for creating installation programs (where the self-extracting installer is created): I checked the monitor of reliability/Action Center / Control Panel and no entries are present between a job and an installer without work.

  The file 'KERNEL32.dll' is mentioned in the error message, I checked his date of change, which is 11/30/2012, this should not be the cause of the problem either.

  Witnin the self-extracting installation program, a few changes were found, those who are considered at the moment, but there is no indication or not those who are causing the error message I see here.

  Does anyone have an idea what may cause the error message mentioned and how to cope?

  Thank you

  Dominique

  These types of error messages mean that the program is looking "inside" the file specified (in this case kernel32.dll) try to find a function/procedure to run called "GetFinalPathNameByHandleW" and find do not.

  The program calls the non-existent function badly or the library file is not in there.  Things do not match somewhere.

  A DLL is a library of dynamic links and files as kernel32.dll are sometimes just a bunch of procedures/functions/subroutines and all located in a single, portable file.

  In a primitive way, you can use a text editor to open the kernel32.dll file (make a copy if it your desire) and search for a string "GetFinalPathNameByHandleW" and you will not find.

  You can even search for "GetFinal", and you won't find it in the XP kernel32.dll file:

  

  But if you do the same thing on a Windows 7 + kernel32.dll you 'll find:

  

  If your program calls a function inside a DLL, but this feature does not exist in the Windows XP's kernel32.dll file.

  I think that GetFinalPathNameByHandleW was introduced in Windows Vista, so now here you would be fine.

  If who wrote your program is that it works on XP, they need to stick to the functions that are part of XP and GetFinalPathNameByHandleW isn't here, where the error.

• Log on to the fault: "the user profile Service service has no logon. User profile cannot be loaded.

  have a 610 Compaq with Vista Business - can not log - message reads "the user profile Service service has no logon. User profile cannot be loaded.

  have a 610 Compaq with Vista Business - can not log - message reads "the user profile Service service has no logon. User profile cannot be loaded.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• The procedure entry point RegOpenKeyExW is not found in the Kernel32.dll dynamic link library

  Hello

  I created an application using visual studio 2008 in windows 7... that I created the application setup. I installed the windows xp Setup program... Application does not work on windows xp... its messagebox popup.
  Message is-> the procedure entry point RegOpenKeyExW is not found in the Kernel32.dll dynamic link library.
  Kindly give an orientation to clear the problem. Thanks in advance.

  Hi Ambikaksm,

  The question you posted would be better suited in the MSDN Forums; We recommend that you post your question in the MSDN Forums to get help:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Keep us updated on the status of the issue.

• How to check the success of the procedure

  Hello. Calling a stored procedure of the database of my form. Is there a method to verify the success of the procedure? If he succeeds, I want to popup a message of success - and a failure on failure message.
  
  Any help would be appreciated. Thank you.

  Yes, simply put the success message after the procedure and leave no possible exception be raised, as

  MY_PROC;
  "Show-Success"
  

• Error messages in the Log Agent Manager

  We get below the error message at the start of the SGF in the log agent Manager

  Sounds to me like the adapter on the fms is not executed in hardware.

  When you go to the Administration > adapters (as agents) do you see an fglam adapter in an active state?

  If it is not active, you can try to turn it on?

  

  Golan

• I want my procedure to return the error message in the batch file

  Hi team,

  I have a requirement from users of the company. Could you please provide your suggetsion to achieve this.

  We have a batch file that is short on time, in this batch file, I'll call you a SQL script.

  In the SQL script, I called you a procedure to run.

  Inside the procedure, I have the following statement,

  Select, insert and update commands.

  and I use ANOTHER exception to handle errors.

  My requirement is to pass the error messages for the batch file when one of the orders was not not run and send a notification e-mail to the group with the error text.

  Please provide your suggestion.

  Thank you and best regards,

  Robette.

  Could you please tell me, inside the procedure I have to remove the OTHER exception and how I can pass the value to the command file and where I add the content of the e-mail notification.

  I suggest that you write modular code instead.

  1. create a log table

  2 modify the procedure to log on to the error log table or exceptions

  3. that others suggest have the recovery/return procedure an exception in the client/batch file

  4. for an exception have the batch file to call a procedure to do the emailing if there were exceptions

  IMHO, it's a MISTAKE to try to put all these features in a single file. It is NOT scalable and makes it almost impossible to update the batch file if the requirements change in the future.

  Logging should be a separate process with a separate log table so that you can capture ALL of the information that may be necessary, now or in the future. Enter information in a table of newspaper, it is EASY for ANYONE to query to see what problems are occurring in the process.

  Emailing should be a separate process so that it can be used for your batch file current, files of future orders or even by procedures or functions in the database.

  Do not try to create a solution "a script does everything."

• How to clear the log messages alerts in the console em12c

  After installing em12cr3, I check the log of alerts via console em12c.

  so I want to erase that checked the messages, but I don't know how to do it.

  Please let me know

  Thanks in advance.

  Hi team,

  From the Console, you can try the following

  Connect to the Console

  Under the Enterprise-> Monitoring-> click the Incident Manager to go to the Incident Manager UI menu item and then click on the link ' open issues ' on the left

  Identify problems specific to your target.

  Click the problem link to view details

  On the right side, you should be able to solve the problem which will clear all Incidents related to the problem.

  or

  Go to the homepage of the target

  Click the menu level target and go to monitoring-> Incident Manager => click on all problems open on the left and identify problem here - click on the problem link to show details--> you should again see the clear option to clear the incident here

  Also you can check below metalink doc to understand what the Cloud Control measures can be erased manually if necessary

  REF

  What are the Statefull and stateless Metrics in Enterprise Manager - explanation and example (Doc ID 733784.1)

  Kind regards
  Rahul

• where are stored the Update Manager logs

  This has been driving me crazy!

  I get errors trying to analyze a multitude of vcenter server. And get the error:

  «ESX cannot resolve the DNS name of the hotfix shop VMware vcenter update manager.» Ensure that the name of Update Manager server can be resolved from the ESX host"

  Now my ESXi hosts are on the SAME local network in the vcenter server box, which has also installed on the update server and the plugin. It would be REALLY nice to know where the hell are the real papers showing that the vcenter server and Server Update Manager made during this analysis, not to mention ESXi 4.1 logs can show something interesting.

  Ive found a lot of messages on the server vcenter and verisons esxi 3.5 and 4.0, as well as on ESX (not ESXi)

  Ive even looked in the documentation for the ESXi server and vcentre. He said almost all other newspapers, but does not update the log files manager...

  Where can I find these... im going gaga!

  Sorry, I thought you were in 2008. For XP, I think they're under C:\Documents and Settings\All Users\Application Data\VMware\Update Manager.

  In any case, I'm glad you found the answer.

  ___________________

  A +, EASD, MCP, MCSA, MCSE, MCTS, MCITP, MCDBA, NCDA, VCP4

  If you find this or any other answer useful please consider giving points by checking the correct or helpful answer.

• The message of the ADF Logger on WebLogic Server Log

  Hello world
  
  I have developed an application and I use using ADF Logger inside to save the Jdev log message
  but I want to display the message on the weblogic Server
  
  can someone help...
  
  
  Concerning
  
  Praveen

  Then you connect to the EM of your wls and select the managed server your application is running on, right click and select "Logs." Now, you get the screen of the monitor and can search FRO your posts as you can do in JDev.
  Select "Log Configuration" to change the level of logging of your recorder.

  Timo

• get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  Hello

  You can try to install the latest version on the current: https://www.mozilla.org/en-US/firefox/new/