Manager command line tool extension works is not in Windows 10

Similar Questions

• Extensions Manager command-line tool will not install extension for Photoshop CC 2015

  I use Photoshop CC 2015.0.1 on a MacOS 10.9.5

  I try to install the extension FlatIcon found here: http://www.flaticon.com/download-plugin#

  Using the information I found here: https://helpx.adobe.com/extension-manager/using/command-line.html

  I downloaded, unpacked and installed the Extension Manager command line tool: http://www.adobeexchange.com/ExManCmd_mac.zip

  (I found the link to this file here: https://www.adobeexchange.com/resources/28)

  I opened the Terminal and entered in the following:. / ExManCmd - install "Users/angyb/flaticon-CC-2.5.5.zxp".

  And he received in response:

  dyld: library not loaded: @rpath/LibExManCoreLib.dylib

  Referenced from: /Users/angyb/./ExManCmd

  Reason: image not found

  Trace/BPT trap: 5

  Other that to wait for the author of the extension release a Photoshop CC 2015 compatible Installer, do you have advice on what I need to do to properly install this extension?

  Thank you.

  I just found this today that allowed me to install a plug-in for Photoshop CC 2015:

  Site - Installer Zxp

  Install it, run it, and then drag your file zxp the indicated place. Voila! Extensions to work Photoshop CC 2015!

• Extensions Manager command-line tool

  Does anyone know when this tool is likely to be available and what will be its functionality.

  I still have to offer extensions through my site, but customers while waiting to open windows Terminal and run command lines will cause problems.

  Hi, this tool is currently available at the foot of this article: Adobe Exchange

  We recommend that you create your own setup file for extensions available on your own website.

• User accounts - > user accounts to manage a link doesn't work is not in Windows 7 64 bit

  Hello

  I tried to open the Panel-> user accounts-> accounts less manage accounts does not create a new account link. My OS is Windows 7 64 bit. 32-bit Internet Explore doesn't work. I tried to register the dll files to 32-bit internet explorer, but it does not work. Please help me.

  Hi Madhavaarimilli,

  -You receive an error message when you try to create a new user account or access to Internet Explorer 32-bit?

  First of all, I suggest to start the computer in safe mode and check if you can create a new account on your computer. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode, select it and press ENTER.

  Access the link to learn more about how to start the computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  To create a new user account follow the steps below:

  1. open user accounts by clicking the Start button, click Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4 type the name that you want to assign to the user account, click an account type, and then click create an account.

  If the problem persists in safe mode, I would say allowing you to run the auditor of file system (CFS) analyze and check if if helps solve you the problem.

  To run the Scan SFC follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command calls, the following line and press ENTER: sfc/scannow

  Access the link below to learn more about the execution of the System File Checker:

  http://support.Microsoft.com/kb/936212

  For question connects to open Internet Explorer, I would say to run the Internet Explorer troubleshooting utility built into Windows 7 and check to see if it helps you solve the problem.

  To run the Internet Explorer troubleshooter, follow these steps:

  1. close all programs.

  2. click on start and then click Control Panel.

  3. under system and security, click on find and fix problems.

  4. in the left pane, click View all.

  5. click on Internet Explorer Performance. This opens a new window.

  6. click Next.

  7. the resolution of the issues will take place and try to solve the issues raised everything automatically. Click Close.

  After the store has run successfully, check to see if you receive the same error.

  Also access the link below and follow the steps to solve the problem with Internet Explorer.

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Hope this helps and return to view the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem with Xcode command-line tool

  Hello

  Last week I upgraded my macbook pro with the latest OS X Capitan and 7.3 of Xcode.

  I also installed the command line for Xcode Tools.

  But there is a problem because the "command-line tools" in Xcode do not work, for example, I am getting following error:

  MyMacBookPro-5: ~ make amitc$ xcrun

  xcodebuild: error: SDK '/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer /SDKs/MacOSX10.10.sdk' is not found.

  xcrun: error: cannot find the utility 'make', not a tool of development or on the WAY.

  Does anyone know any solution to this problem?

  (I don't understand why he's trying of MacOSX10.10.sdk, while it must search for MacOSX10.11.sdk).

  With our thanks,

  Amit.

  You agree with the terms and conditions of the license?

  sudo xcodebuild-license

• WinRAR command line tools do not check an executable Windows Server 2012

  Hi all

  I have developed a VI in LabVIEW 8.6 using WinRAR command line tools (passed in the Exec.vi system) to archive data that takes place on 5 different computers on a network and stores on a server .rar files.  Executable file of the VI works perfectly on my computer (WinXP) development.  The data from each of the 5 machines are archived and .rar files are stored on the server.  However, when I move the executable on the server where the .rar files will be stored and run the executable file, the command window flashes on the screen as if WinRAR commands are running, but no data is archived on the server.  No errors are passed out of the Exec.vi of the system.  The server's operating system is Windows Server 2012 and I placed the Rar and UnRAR .exe in the folder system32 on the server.  The server firewall is disabled, and he is able to explore at the location of the data to arhived.  The server is logged in as a domain administrator account.

  Here is an example of one of the commands in command line that I spend in the Exec.vi system:

  cmd /c rar a - m5 \\selsacn11\viscom\selsvis01\15\07\20.rar \\selsvis01\Rep0\Archiv\15\07\20

  When I manually type this command in the command line on the server, the data is stored properly.  The problem occurs when I run the executable on the server.

  I tried to work around the problem by creating a batch of files containing the command above, then using the Exec.vi system to call this batch file.  Yet once, when I manually run the batch file, it works correctly, but when Exec.vi system in a LabVIEW executable file runs the command on the server file, I get the same result as described above - no data are archived on the server.  This batch file works on my development computer and on my laptop to the company.

  My only thought is that there is a problem with the access rights.  So far, the executable works fine on an older server (Windows Server 2003), the development computer (Win XP) and my laptop (Win7) company, but the executable archive not the data on the Server 2012 server or on another computer running WIndows 7.  I have all these machines connected under the same domain administrator account, but COMPUTER networks are certainly above my head, so I wanted to check here if anyone has seen this problem with WinRAR or the Exec.vi system.

  Thanks for any info!

  Success!

  Darin, I took your suggestions and after some more fighting with him, I have an error Code 2 on the Exec.vi system.  This led me in search of the forums where I fell on the following:

  http://forums.NI.com/T5/LabVIEW/problem-using-quot-MSG-quot-command-with-quot-system-exec-VI/m-p/153...

  Of course, all the machines that had been able to run the executable file are 32-bit.  All the machines that could not run the executable are a 64 bit system.  I placed the Rar.exe in the C:\Windows\SysWOW64 folder on the server and it works exactly as expected today.

  I fought with this for weeks, so I'm a little disappointed that it was something so simple, but I'm very happy to have finally work!

  Thank you all very much for the help!

• 10.11.4 update has failed because of the command line tools

  The 10.11.4 update fails with a message on the command line tools.

  I found this in system.log.

  Memento kernel [0]: sandbox: softwareupdated (329) deny system (1) - 682f fsctl

  181Mb Command Line Tool for Xcode 7.3 keeps reappearing in the section "updates" from the App Store, 10.11.4, as well as the global update apparently cannot continue.

  Normally, you should be able to select the updates separately (click on "More... »). If this does not work for some reason, you can download the 10.11.4 update by itself: download OS X El Capitan 10.11.4 updated

  (Combo version: Download OS X El Capitan 10.11.4 Combo Update)

• I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  You probably have some of the older than the needs/desires software legacy Java installed.

  Please see these sons of community message:

  After the installation of El Capitan, I get the message: to use the 'java' command line tool, you must install a JDK

  Just found this last Java does not work with El Capitan

  This is the Apple link to the legacy version of Java 6.

  Download Java for OS X 2015-001

  First of all, I would like to try to identify what application generated the next message and update (delete) this request as the case may be. If you need to run Java then, as the Apple Support page says it's certainly preferable that your installation of Java entirely up-to-date with the Oracle's Java course. If you can get without Java, you should install it not - like the Flash, it should not be installed unless you have no choice.

• The developer command-line tool Setup error

  Hello

  I had a hard time trying to install the tool developer for the AEMM, since that it was released yesterday.

  Here is what I get after the execution of the installation in root mode command line:

  Anyone who managed to install the tool?

  NGP ERR! Darwin 15.3.0

  NGP ERR! argv ' / usr/local/bin/node "" / usr/local/bin/NGP "'install'"-g"'aemm.

  NGP ERR! node v5.8.0

  NGP ERR! NGP v3.8.3

  NGP ERR! path /usr/local/lib/node_modules/aemm/bin/aemm.js

  NGP ERR! code ENOENT

  NGP ERR! errno - 2

  NGP ERR! syscall chmod

  NGP ERR! ENOENT ENOENT: no file or directory, chmod ' / usr/local/lib/node_modules/aemm/bin/aemm.js'

  NGP ERR! ENOENT ENOENT: no file or directory, chmod ' / usr/local/lib/node_modules/aemm/bin/aemm.js'

  NGP ERR! ENOENT This probably isn't a problem with the NPM itself

  NGP ERR! ENOENT and is linked to the NPM is not able to find a file.

  The command line tool is still under review and will be available soon. We'll let you know when it is available.

• Guests of Catalog Manager command line

  Hi all
  
  I found a great blog on how to generate reports of catalog command-line from blog below.
  
  http://www.rittmanmead.com/2010/06/Oracle-BI-EE-10-1-3-4-1-Catalog-Manager-command-line-options/
  
  When I try the above, it did not work for me. I'm getting ""catalogmanager"is not recognized as internal or external command an executable program or batch file."
  
  can you get it someone please let me know what file I need to run the above commands. I use OBIEE 11 G.
  
  Thank you
  Neeraj

  Hello

  The path is MWHOME\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalogmanager\runcat.cmd

  The command below will give you a report in excel format

  runcat - cmd report - C:\middleware1\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\SampleAppLite outputFile offline - c:\report.xls - excelFormat-delimiter ""-"Analysis" "Column" type "table"

  You can run runcat - cmd report - help to see more options.

  I hope this helps.

  Thank you

• Keep getting 'command line' has stopped working

  When I try to turn on windows Defender - will work a few minutes then I get the error message the command line has stoped working and leaves the program - it won't turn after I restarted my computer - but maintains it of the thing happens - I have to run a malware scan - but just Defender will not stay

  If you have Microsoft Security Essentials, AVG, McAfee, Norton, etc. installed, they have a conflict with Windows Defender, or turn it off.

  Microsoft Security Essentials has its own integrated version of the defender and should automatically disable the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the above explains the common compatibility issues with Windows Defender and other security programs.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Use this program:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• How Windows Server backup and command-line tools are used in the installation of vCSHB?

  How the Windows Server backup and command-line tools are used during the installation of vCSHB?  It takes in all types of deployments (PtoV, VtoV, PtoP)? It is used to create files that are put in file sharing for the second node to use during the installation of vCSHB or is it only used during a clone of vCSHB of a physical to physical deployment operation?  These tools are not used in some deployments?

  You need backup Windows Server installed on the source and destination, and during the installation of vCSHB the installer will call the wbadmin (Windows Server Backup Utility) and will save the configuration and application data (application data is optimal, but can reduce the synchronization time after the installation of the secondary node). On the secondary node you will should only run the vCSHB Installer and everything will be restored.

  Check this blog entry for some info on P2P deployment issues: http://www.vcoportal.de/2013/12/vmware-vcenter-server-heartbeat-restore-on-a-second-node-a-journey/

• Adding users to a group of construction using the command line tool

  Hello
  Please forgive me if this is in the wrong category/forum, I can't seem to find one for Oracle Portal. I wonder if someone could help me with this issue please?
  
  I am trying to automate the adding users to a group of portal, entries already exist for users in the OID.
  With the help of the following ldapmodify command:
  
  ldapmodify h myhost.company.com Pei 389 - D cn = sleep w f /home/modify.ldif password
  
  where /home/modify.ldif has the following entries:-
  
  DN: cn = User1, cn = Users, dc is company, dc = com
  ChangeType: modify
  Add: orcldefaultprofilegroup
  orcldefaultprofilegroup: cn = groupname, cn = portal. 090112.174408.194907000, cn = groups, dc = company, dc = com
  
  DN: cn = User2, cn = Users, dc is company, dc = com
  ChangeType: modify
  Add: orcldefaultprofilegroup
  orcldefaultprofilegroup: cn = groupname, cn = portal. 090112.174408.194907000, cn = groups, dc = company, dc = com
  
  The ldapmodify script puts the specified group in the field "Default group" of the 'Edit portal user profile' page in the portal, which is fine. However it is not in fact add the user to the group. When I check the list of the members of the users group are not listed. Also the group is not listed under the existing users group membership "in the"Edit user"page. Also, when I try to connect to the portal as users, I get the error message "you are not authorized to perform this operation. (WWC-44131) "
  
  How can I add users to a group membership by using the command line tool?
  
  Thank you.
  
  M

  Your LDIF file must change the group entry and no input from the user.

  something like

  DN: cn = portal. 090112.174408.194907000, cn = groups, dc = company, dc = com
  ChangeType: modify
  Add: uniqueMember
  uniqueMember: cn = User1, cn = Users, dc is company, dc = com

• How can I remove the pop up next to my iMac? "to continue the 'java' command line tool, that you must install the JDK

  I can't seem to make the tour of the following pop up: "to use the"java"command line tool, you must install JDK.  I downloaded Java for many times, but the pop-up Guard reappear.  Is there any solution to get rid of this pop up, it makes me crazy?  Help, please!

  What java you have download and install.  To install is TIME legacy java 6 Apple for OS X, which can be downloaded here: Download Java for OS X 2015-001

  

• Function keys not working do not after Windows 7 installation

  Function keys not working do not after Windows 7 installation. After I installed Windows 7 on a Sony VAIO laptop, the function (brightness, volume) keys stop working. is - anyone know how to fix this in windows 7? Thank you

  What can I do with this? I want to re install windows. ?

  Hello

  This thread offers you everything you need to install the right keyboard control drivers and utilities for your function keys working again:

  http://www.geek.com/forums/topic/Sony-VAIO-fn-keys-no-longer-work

  Don't forget to keep your model number of the laptop at hand for the page of the driver from the Sony site.