Manipulation of time range

Similar Questions

• BlackBerry Smartphones black box with timer ranging tour continues to appear!

  I get the black box with timer ranging tour continues to appear! I know how to use the clear application memory integrated into my BB, I also remember Boost, I know how to click the browser, and then click options tik down 2 boxes and everything else, I pulled the battery, I also Bejoose. It just started the last few days. Its really frustrating trying to type something in an email or FB and freeze for a minute or two. I don't know what I can do.

  Goto options

  Press the button to get the menu and activate keyboard BB

  Press on and hold & % 123 key for 3 sec

  type -. 5 * and Analyzer device is activated

  If you make it at all, press ESC to home screen and try again.

• Bind the time range slider to input fields

  I went through a bunch of tutorials and can't seem to find the answer to this. I'm trying to implement a cursor of the chronological range for entry into a database. I started with the example

  http://codepen.io/caseymhunt/pen/kertA.

  I have two input fields IDs StartTimeEntry and EndTimeEntry . How can I get the values of the scabbard for updating the values of these two fields of entry form?

  Thank you.

  Locate the following line in the script jQuery on CodePen:

  $('.slider-time').html (hours1 + ':' + minutes1);

  Replace it with this:

  $('#startTimeEntry').val (hours1 + ';' + minutes1);

  Similarly, replace this:

  $('.slider-time2').html (hours2 + ':' + minutes2);

  with this:

  $('#endTimeEntry').val (hours2 + ':' + minutes2);

• How can I delete the history for a specific time range?

  I would like to delete my browsing history that is older than three months. I was trying to just remove it from the history, but I can't do more than one site at a time. Is it possible to delete several sites at the same time or put in place to delete automatically any more than three months? I know I can clear recent history easily, but it isn't recent history I want to remove them easily.

  Hello emily, normally in the library you can press ctrl + a to select all the entries in a folder/category. This should make it easy to remove all entries from the history at the same time.

• Impossible to select the time range in dropdown menu-foglight PASS UI.

  Hello

  I'm new to foglight and is having a little problem with the user interface. I doubt if I'm in the right place to ask this question.

  I use Foglight for SQL Server 7.0 v. Under UI, there is a drop down for the time interval, which, in my view, does not work as expected.

  

  Please see the snapshot. Here, when I click on "last hour", next to the slot, a drop down menu arrow rises but it disappears very quickly and I can't change. I think that this menu has options like "last 15 minutes, last 6 h etc.

  Please notify.

  Thank you

  I found the solution. It was because of two monitors.   Once I went to the main screen, I could see menu items drop down.

• Time range of statistical performance data store

  When I look at the performance of the data store tab in the performance monitor what time slot is used to generate the statistics?

  Hi Michael,

  The time slot is for 24 hours.

• Breakup time range

  Hello

  I have following data in my table of LEAVE. I want to divide each period of leave at different times.

  with

  leave as)

  Select 1 as empid, to_date (08 January 1 2014:00 ',' DD/MM/YYYY HH24 ') as leavefrom, to_date (March 1, 2014 16:00 ',' DD/MM/YYYY HH24 ') as leaveto of all the double union

  Select 2 as empid, to_date (08 January 1 2014:00 ',' DD/MM/YYYY HH24 ') as leavefrom, to_date (1 January 2014 16:00 ',' DD/MM/YYYY HH24 ') as leaveto of union double all the

  )

  Power required is as follows

  -------------------------------------------------------------------------------

  ID FROM_TIME TO_TIME

  -------------------------------------------------------------------------------

  1 01/01/2014 08:00 01/02/2014 00:00

  1 02/01/2014 00:00 01/03/2014 00:00

  1 03/01/2014 00:00 01/03/2014 16:00

  2 01/01/2014 08:00 01/01/2014 16:00

  I use oracle 10 g

  Help, please...

  Hello

  2730134 wrote:

  Hi Frank,.

  Power required is as follows...

  Sorry, my mistake.  I forgot start_date truncated when added to it:

  WITH got_ndays AS

  (

  SELECT empid, leavefrom, leaveto

  , CEIL (leaveto - TRUNC (leavefrom)) AS ndays

  Annual LEAVE

  )

  got_maxndays AS

  (

  SELECT MAX (ndays) AS maxndays

  OF got_ndays

  )

  AS cntr

  (

  SELECT LEVEL AS n

  OF got_maxndays

  CONNECT BY LEVEL<=>

  )

  SELECT n.empid

  Largest (n.leavefrom

  TRUNC (n.leavefrom) + c.n - 1

  ) AS dayfrom

  , The LEAST (n.leaveto

  TRUNC (n.leavefrom) + c.n

  ) AS Degnide

  OF got_ndays n

  CNTR JOIN c ON c.n<=>

  ORDER BY n.empid

  ,         c.n

  ;

  Output:

  EMPID DAYFROM DEGNIDE

  ---------- ---------------- ----------------

  1 01/01/2014 08:00 01/02/2014 00:00

  1 02/01/2014 00:00 01/03/2014 00:00

  1 03/01/2014 00:00 01/03/2014 16:00

  2 01/01/2014 08:00 01/01/2014 16:00

• The performance of the processor and memory performance by the Date and time range

  Hi Expert,

  I'm not that good in script and even learn how to write one, but for the moment that I need help get script that could generate as below output.

  Example query:

  Retrieve logs performance for vmname1, vmname2, vmname3 from 07:00 to 10:00 on 25/05/2012.

  CPU MHZ, and MEM in MB.

  VMName	Date	Time	MemMax	MemAvg	MemMin	CPUMax	CPUAvg	CPUMin
  vmname1	25/05/2012	06:00	55,49	48.30	44,55	18.34	10.56	7.43
  vmname2	25/05/2012	07:00	52,82	47,81	44,35	28.14	9.80	4.23
  vmname3	25/05/2012	08:00	48.62	46.04	42.19	22.51	12.92	8.80
  vmname4	25/05/2012	09:00	49.11	47.66	41,45	15.82	8 h 45	4.36

  I appreciate really all advice in this area. Thank you.

  You can try something like this

  $vms = Get-VM vmname1,vmname2,vmname3  $metrics = "cpu.usagemhz.average","mem.usage.average","cpu.usagemhz.minimum",          "mem.usage.minimum","cpu.usagemhz.maximum","mem.usage.maximum" $start = Get-Date -Hour 7 -Minute 0 -Second 0 -Day 25 -Month 5 -Year 2012$finish = Get-Date -Hour 10 -Minute 0 -Second 0 -Day 25 -Month 5 -Year 2012
  Get-Stat -Entity $vms -Stat $metrics -Start $start -Finish $finish |Group-Object -Property EntityId,Timestamp | %{
    New-Object PSObject -Property @{
      VMName = $_.Group[0].Entity.Name    Date = $_.Group[0].Timestamp.ToLongDateString()
      Time = $_.Group[0].Timestamp.ToLongTimeString()
      MemMax = $_.Group | where {$_.MetricId -eq "mem.usage.maximum"} | Select -ExpandProperty Value    MemAvg = $_.Group | where {$_.MetricId -eq "mem.usage.average"} | Select -ExpandProperty Value    MemMin = $_.Group | where {$_.MetricId -eq "mem.usage.minimum"} | Select -ExpandProperty Value    CpuMax = $_.Group | where {$_.MetricId -eq "cpu.usagemhz.maximum"} | Select -ExpandProperty Value    CpuMin = $_.Group | where {$_.MetricId -eq "cpu.usagemhz.minimum"} | Select -ExpandProperty Value    CpuAvg = $_.Group | where {$_.MetricId -eq "cpu.usagemhz.average"} | Select -ExpandProperty Value  }
  }
  

  Note that this will depend on the statistical level that you set for the chosen time interval, if the measures minimum and maximum will be available.

• Script to find concurrent work that ran for a long time in the time range

  Oracle Apps:12.1.1
  DB: 11.1.0.7
  OS: Linux RedHat 86 x 64
  
  All,
  
  A particular day could someone please share the Script to find concurrent work who long ran specifically say between 15:00-16:00 in the one hour time slot.
  
  Thanks for your time!
  
  Kind regards

  A particular day could someone please share the Script to find concurrent work who long ran specifically say between 15:00-16:00 in the one hour time slot.

  https://forums.Oracle.com/forums/search.jspa?threadID=&q=actual_start_date+and+FND_CONCURRENT_REQUESTS&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=actual_start_date+and+fnd_conc_req_summary_v&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  Thank you
  Hussein

• Create a custom event based on a time range

  I'm checking what past events have woken up my pc to sleep for the night. How can I set the custom display only all events between say 22.00 and 07.00 rather than having to go 24 hours every day. Furthermore, if this is not possible, can I just see beyond events that have become aware of my pc.

  Ron

  In paragraph 2.23 answered your initial question:
  http://www.gerryscomputertips.co.UK/syserrors6.htm

• BlackBerry Smartphones calendar change time range

  My calendar shows a period of 9-5 daily... How can I change this as working hours are more than a simple 9-5...

  Thank you!

  GV

  Menu = the left key of the trackball... with the RIM logo on it... points.

• Time manipulation

  Hi guys,.

  I took a peek at some of the video-Copilot tutorials on the manipulation of time and have a question or two around After Effects and frame rates.

  The Panasonic camera I use, according to the documentation, allows to record several frequencies of images it has Variable speed capabilities. Footage native to the camera, right to the map only records around 192 MB per second (24 MB) and I don't think it's very good. If I save on an external device, the same second 10 results in 1880 MB / second (235 megabytes). It's obviously much better and it contains much more information to allow for more post work.

  The problem I find, is that, according to the documentation, you can not register higher than 30 FPS to an external recorder, HD - SDI cannot handle 1080/30 p higher data rates. If I use the device (a Samurai recording device) apparently, each image is automatically embedded as a field in a stream of 1080/50i.

  of course when I import directly into After Effects, I need to re - interpret the images and select the appropriate first - field movement is so good enough as slow movement (if they are imported into a composition standard 25 fps - I work in PAL land) with questions obvious movement (strobe or tilt). My question is this:

  Is this the right way to go, or should I save standard 25 fps from the camera to the recorder (at a rate of 1766 MB / second (220.8 megabytes) data) and purchase a manipulator of time to party like Twixtor do the slow downs?

  There's an interesting paragraph in the documentation for the camera I do not understand, and I'm not familiar with the mentioned software - if you allow me, I would like to quote paragraph (ok, I'll paraphrase) and see if someone can explain a little better?

  "With the handling of mail, you can get 1080/60 p out of the AF100. the camera records already to 60 progressive frames per second. When the unit is in 1080/24 p or 1080/30 p and a cadence of 60 is selected, the camera records 60 discrete images every second. the file would have a rate of playback 24 p or 30 p encoded in it, but what happens if you have changed the reading rate? say, what happens if you went in Cinema Tools and 'Model' images to have a time base of 59,94 p instead of 29.97 p or p 23.976? of course, it would become whole, live 1080/60 p footage. 60 fps played back at 60 fps is full-screen, full of quality 1080/60 p. and of course the same applies to the 50 Hz mode - leading to hand full, 1080/50 p'

  The parameters of the camera in Pal-land are PH 1080/50i, PH1080/25 p, 720/50 p of PH and PH720/25 p - since the that give better quality 50i, paragraph preceding confuses me a bit, I'd get 1080/50 p how about her? -of course, I'm assuming that the device is set to 1080/25 p and the Frame rate is set to 50 fps to above results. in any case, once again, perhaps not an entirely AFter Effects question, but any help would be greatly appreciated.

  Stone

  I know isn't what you're asking here. If you're planning on doing idle then save the higher frame rate, you can. If you want the time to match the images in real time to be interpretetd at the same rate, which has been used for filming. If you want to change the speed, to understand what will happen when you change the frame rate interpretation. Let me explain.

  If you place then 10 seconds of film 60 p within a composition that is 20 fps or 24 fps, or 99 fps suddenly will be still long 10 seconds exactly. If the rate is greater than the rate of composition some of the frameworks will be abandoned. If the rate is less than the pace of the composition of that some of the frames will be duplicated. Movement of falling frames are not as noticeable as of artefacts of movement caused by duplication of images. Interpolation and other techniques available in After Effects to alleviate these problems. The third-party solutions like Twixtor can do a better job than the tools that come with AE but may be unnecessary unless you consider images slow way way down.

  Let's talk first progressive images. If the rate is greater than the frame rate of your publication and you intend to use the built-in tools, the appropriate technique must match the cadence of the composition. If your publication is 24 fps then interpret the film at 24 frames per second. If the composition is 30 frames per second or 29.97 FPS then match these numbers. Then ten seconds of 60 p footage in a composition of 30 frames per second would play for 20 seconds, or be at 1/2 speed. Ten seconds of film 60 p in a model of 25 fps would play for 24 seconds. If you use the EA built in tools then this is your best option bit matter how you want to change the playback time.

  If you use a third time like Twixtor manipulation tool, then you must follow their instructions. Twixtor will work just fine if you match the cadence at the actual rate of the images.

  If the original movie is interlaced, you have another pair of sleeves. 50i footage there really 100 fields per second, or are there only 50? 60i pictures really 60 FPS with 120 fields per second or is it 59,97 frames per second at 29.97 frames per second? In both cases it is true. There is only one way to know for shure. You separate the fields and set the pace of your best estimate. Then, create a new composition with your images by dragging on the new icon of the model or by selecting the images and choosing new layout of sequences. Then you open the parameters of the model and to double the pace of the composition (you can do the math in the field by typing * 2 after the value that is there). Then scroll through the images of an image using the Page up key. This will immediately show if you have well interpreted the rate and whether or not the order is correct.

  I have not run specific tests on your camera or your external recording device, but in all likelihood, your 50i footage is 50 frames per second and 25 frames per second. IOW, the correct interpretation is probably 25 fps separating the high fields first. Test to make sure.

  Once you know exactly what you have, you have three options. My usual technique is to make just this model frame lined with a production format so I did not need to deal with interlaced images and the rest of my production pipeline. The other is to use the model frame doubled as a source of sequences for any handling time you will make ensuring that preserve the cadence of the nested compositions is turned on. The third option is just to use the images correctly interpreted.

  One last thing before I go. If you use a third-party solution, you must follow their instructions specifically when you use interlaced images. Images must be interpreted correctly for third-party solutions work properly.

• Why Time Warner Cable webmail is now a non-secure site grey triangle? It was beautiful last night; just happened this morning. TWC has been of no help.

  Get the gray triangle on webmail.maine.rr.comwarning; other sites I use are safe. Is this a problem of Mozilla or TWC?

  Hello

  Maybe there was an update on the site? I just visited the link you mentioned an I see a lock symbol, letting me know my connection is secure. You can try this:

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Click the menu button

     

     , choose historic, then "Claire recent history...". ».

  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click on the "Clear now" button

  More information can be found in the article remove the navigation, search and download history on Firefox .

  This solve your problems? Please report to us!

  Thank you.

• History - history recent beach time is displayed

  Hi I have a problem with my recent history of compensation.
  The problem is my time range to clear is buged and not displayed.
  I tried reinstalling firefox and all the parameters of compensation, but it did not help.
  So I decided to write here for more help.
  Thank you

  It seems to be more wrong, looking at bugs that have been tabled:

  • https://Bugzilla.Mozilla.org/buglist.cgi?product=Mozilla%20Localizations & Component = BG % 20% 2F % 20Bulgarian & Resolution =-

  Only these two lines must be in the userChrome.css file:

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  #SanitizeDialog { width: 34em !important; }
  

• EBay on Firefox screen is several hundred times too big, but not on Explorer. All the necessary patches?

  I logged on the ebay web site and home page displays correctly, but when I try to search the categories, the pages appear much too large. This does not happen on Internet Explorer. Are there patches that I need to download or update?

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.