many problems with the pc to dell who is 9 years old

Similar Questions

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Too many problems with the latest version of Lightroom

  Hi all

  I have too many problems with the latest version of Lightroom (CC 2015.2.1 1046594)

  In fact, the latest version of 3 or 4 were bad: instead of doing better, I always had more problems.

  So I would like to go back to a previous version of lightroom

  Adobe customar care, in Italy, is unnecessary:

  they can just to:

  -looking for answer on this forum

  -saying "you solve your problems just with the de-insall and re-install it.

  stop, no more...

  in this way they create me a lot fo iusses...

  I use the English version of the PS and LR, but they made me reinstall the Italian version of CC because it has been blocked

  the result was that CC does not recognize software, due to a different language version

  so, I contacted again Adobe Customer Care... they said "no problem, uninstall LR, delete these files and install this...

  I did and I let go 2 years to develop the parameters on the correction of the colors for my clients because they told me to remove a folder, I need!

  so, I ask you now if there is a way to return to a previous version of lightroom, any previous version...

  I never found better performance in more recent versions...

  I've always found, performance slower, more problems...

  personal idea: I do not understand why adobe are boicotting itself, but I think he do!

  Thanks to you all

  Hi ramontillo,

  6.3/CC 2015.3 Lightroom is now available - try to update to this version which includes the previous import feature, bug fixes and new support for photo/target device profile: Lightroom CC 2015.3 / 6.3 now available

  Concerning

  Pete

• I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  Hi Gemma,

  It seems that after reinstalling, Premiere Pro no has not been updated to the latest version. Check your application creative cloud for updates. If she says Premiere Pro is up to date, try to update Premiere Pro through help > updates... option in Premiere Pro.

  Thank you

  Regalo

• Many problems with the runtime Adobe AIR for Android

  I created an application on Adobe AIR for Android platform, which requires for AIR. The app is very popular in the Android Market, but many users complain of problems with the installation of the Adobe Air runtime.

  For example, these users phones: LG LGE-P698, LG Pecan, HTC Wildfire. But judging by the fact that users have access to the installation of the Air, their phones are compatible with it.

  Tell me how to solve the problem?

  In addition, I have a few questions:

  1. Decides that the problem of demand for export with built-in AIR runtime?

  2. I have create my applications using ADT. In this case how do I seal AIR runtime?

  3. is it possible to invite the user to download and install older versions of AIR? Where can I find her?

  I hope I can help, because the problem is global.

  Hi Astraport,

  I think you should integrate the air in your application runtime,

  Some time ago I wrote a step by step guide, take a look at this post:

  http://forums.Adobe.com/message/3961579#3961579

  I hope it helps

• Many problems with the Camileo X 100

  I have a Camileo X 100 (nice and fantastic image quality) and the files are not edit from any conversion or editing software, I tried several times with all software codec
  My PC configuration is:

  Win VISTA Home Premium SP2 32 bits, ACER 9420 17 ", Intel Core 2 CPU T5500, 1.66 GHz, RAM 2 GB, 160 GB HARD drive, NVIDIA G... eForce Go 7300, K-Lite Codec Pack 5.8.3, etc..).
  0 is sufficient or not, for family movies to watch on DIVX player (on Plasma 42 '' HD Ready TV)?

  Issues related to the:
  1. How can I manage these files?
  2. I to convert before (but without the quality loss)?
  3 Please someone explain 'step by step' what I need to do (and with what software) to make simple movies (divx), without quality loss?
  4. when I connect my X 100 to the TV and I watch a movie, always remain above a boring bunch of icon that it does not disappear. Is only my X 100 or other people has the same problem?
  5. I have a lot of problem also with remote control, it's very crazy (bad firmware, zoom not working,...)?
  6 is it better me to return the camera, or these problems have all and that they can be resolved?
  7. is there someone who does not have problems with x 100? How is possible?
  8. when Toshiba updates the firmware?

  There are too many insects (ALL IS SLOW AND UNSTABLE).
  Only ARCSoft (software bundle) works, but it is not good (cheap).
  Please answer me all 9 questions.
  Sorry for my English (I prefer Italian).

  Thanks for the help.
  Antony

  0 configuration is fine, although I would not use Vista, but it's personal preference.
  1. the files can be managed without conversion with any video editing program, for example, Sony Vegas, Nero Vision, etc.
  2 - 3.Conversion is necessary to be able to view the DIVX player, as AVCHD is not supported usually. Unless you have a Blu - ray player. If you have one, you can prepare a BR disc on computer time, if you have a BR player that can burn discs BR. In this case the conversion will be done, but quality will remain. You can not divx without loss of quality. It is impossible.
  4. annoying iis band always on the screen, you cannot delete it.
  5. the remote control works well, with the only problem I've found, described in I opened. Zoom does not work? You mean during playback? It only works when you save.
  6. it of your decision if you return the camera or not. I think that for this price it is very good. Get you one, where there is no such problems for the triple price.
  7.i have a single problem (remote) with it, but at the moment I can live with, that I made my compromise.
  8 Toshiba support is terrible. I can not even a phone number or e-mail address in Hungary for Toshiba to support. The Web page for support is source of confusing and if you search for TV, you're not among the many companies, that takes the car from these products. Ridiculous. I don't know if they will update the firmware, I'm curious too.

  Good luck.

• Why this site of discussions have so many problems with the entry of text of iPhones?

  IT capitalizes the first two characters sometimes duplicating them. Also the wiretap on a planned text will not type this text.  The list goes on... The questions are exclusive to this Web site. (In addition, it is terribly mobile hostile in general) for example, I can see the categories so I can't select the right category. Sorry moderators.

  You will need to ask Jive, the developers of the software running on the forum. But don't hold your breath waiting for a reply.

• Problems with the video file (wmv) path - Director Keeps restoring old road

  I am looking for assistance in obtaining a video playing live per floor in my movie once it is burned to CD.

  What I found is this work expected to use a relative path , and my film must find the video files very well.  However, I have great difficulty with this.  I was able to change the 'filename' from the video cast member to a relative path (@Video\videofilename.wmv) and the property inspector reflect this change.

  

  However, once I save, publish and check that it works, the film begins to search for the file in the original location.  What happened several times.  I changed the properties for the Member of the cast in the cast, as well as for the onstage cast member (not sure if their properties are related, so after a few troubled results, I tried to change both).  Whatever happens, the path in the file name field is back:

  

  I've even went up to remove the videos of the scene and casting, then add them again, using only the relative path in the file name field, does not.  The result is always the same: once I have save and publish again, the name of the file back to the absolute path.  To say the least, it's frustrating.

  Thank you very much in advance for your help.

  B

  The operator 'path' should be considered as the combination of characters "@:" or "@------" or "@/ ', then your path should be"@\Video\videofilename.wmv ".

  As you say, this should not give problems. If it persists, there are two options. Use Manager prepareMovie for the searchPathList and set the member.filename property before than the dialog box 'where's... ' is displayed:

  on prepareMovie
    _player.searchPathList.append(_movie.path & "Video")
    -- member("wmv").filename = "@\Video\videofilename.wmv"
  end
  

• Problem with the Installation of JAVA in my new Dell running Windows 7

  Problem with the Installation of JAVA in my new Dell running Windows 7 - error message when you try to intall Java using Chrome.

  "lib'charsets.jar: old file not found."  However, a file of the same name was found.  No updates since the contents of the file do not match. »

  Then "Java update fails to apply the changes to your system."

  Then "error 1722.  There is a problem with this Windows Installer package.  A fun program as part of the Setup did not finish as expected.

  Earlier, I had a problem with the video and had Windows reinstalled 7.  Now my AOL games don't show/reading.  JAVA said error 1722 is an InstallShield error code. It indicates that the installation process has failed. The exact reason for this error is not known at this time.  I was told to uninstall JRE (Java Runtime Environment).  I find two versions of Java on my system (no JRE) - Java (TM) 6 - update 14 and 14 (64-bit).  Should I uninstall both?... OR WHAT?

  Hi Betty48228,

  Here's how to solve your problem:
  (1) uninstall all versions of Java.
  (2) the uninstall will probably fail. If so, get Revo Uninstaller free http://www.revouninstaller.com/revo_uninstaller_free_download.htmland uninstall Java in advanced mode (integrated Java uninstaller runs, failure and then Revo will delete everthing manually). You will need to restart your PC.
  (3) reinstall Java: http://java.com/en/download/

• The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are security protected.

  Access to the BT hotspots.

  The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are protected from security and only the nearest BT hotspot is displayed. There are many others, but they are invisible. I think that there is a software that allows you to see several hot spots the. BT are unable to give me the details.

  This is probably a function of the driver for your wireless card.  I would check with the manufacturer of the computer or adapter.

  Good luck.

• Problem with the Dell powerconnect 5424

  Hi all!!

  I got 2 switch dell powerconnect 5424. I set them up with an IP and everything goes well (for now).

  But when I connect a switch on the network I have this message:

  1 January 2000 00:01:07 % STP-W-PORTSTATUS: g21: STP Forwarding State
  1 January 2000 00:01:27 % STP-W-PORTSTATUS: g21: STP Blocking status
  1 January 2000 00:01:27 % STP-W-LOOPBACKDET: g21: STP loop detection.
  1 January 2000 00:01:42 % STP-W-LOOPBACKDETRSLV: g21: fixed STP loop detection.

  I do not understand because there is only the network (port 21) and my computer that are not connected so no possible closure.

  There is the same problem with the second switch, so I think this isn't a hardware problem.

  Someone has an idea to help me?

  Thank you

  
  

• Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server)

  Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server), Internet Explorer browser does not.

  Hi Rachel,

  I understand that when you try to connect to the Internet, you get error "Windows cannot communicate with the device or resource (primary DNS server)", what other issues you are faced with Windows?

  • Using a cable or a wireless Internet connection?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  I suggest you to follow the methods in this article and check if it helps.
  http://support.Microsoft.com/kb/2779064/en-us

  Let us know if it helps.  If the problem persists, please answer, we will be happy to help you.

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because that box "email".

  I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.

  Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.

• SEVERAL problems with the new X 34

  So, I have been active during the overclock.net forums concerning the many problems I am having with my X 34.

  Long story short, I'm back this thing to Newegg and waiting for another delivery. But I thought I'd come at least here because it has high liklihood to return to anyone who cares to Acer. I called their tech support to let them know about the issues, but when the old Indian robot for 2 years at the other end kept referring to as resolution of refresh rate, I decided that I couldn't take more.

  So I took delivery of the monitor yesterday and he initially worked well... but the longer he stayed, the more problems, he has developed.

  My system is one I built a year or two ago and works perfectly with my Dell 3008WFP. Video card is a brand new MSI 980 Ti Lightning. Operating system is Windows 10 x 64. Is a Corsair 750W POWER supply. 16 GB of DDR3 RAM.

  I even made a COMPLETELY new install of Windows 10 on this computer to try to resolve these problems. Did not work. I have disconnected/reconnected everything inside my computer, including RAM and GPU. Did not work.

  And Yes, G-sync is enabled in the NVCP. And Yes, I manually set the refresh rate in the NVCP in correlation with the manual settings on the monitor.

  Problem no. 1: Menu recording does not settings

  -Don't know what the problem is here. But for about 3 hours last night, my monitor would not save settings for serger refresh rate. I would go on the menu... allow the serger... Set it to 100 Hz... Select "Apply and restart. Then (here's the interesting thing I think in hindsight), the screen would flash many colors several times and restart. I assumed that flashing color was normal... but it was never the Predator Logo when it has been reset. The office is finally pointing upwards and I could choose 100 Hz in my NVCP... but when you returned from the settings menu, Overclock was Off back with the default refresh rate. I have nothing would fix it with the reset of the monitor and unplug. Later... I have unplugeed the monitor for 30 minutes and when I plugged it back in, it would save my overclock settings now. It is interesting, but now, when I selected "Apply and reset", he would show the Predator logo when restarting... this logo did not appear before.

  Problem #2: Flashing screen

  -See a video of this question HERE

  -This developed before my eyes. After the initial installation of the monitor, it worked fine. Without no flicker, no problems. But as I was sitting at the dinner table last night, I started to see the monitor flashing intermittently in the other room. I look at the screen, he flickered about 4 or 5 times per minute. For the next hour, he progressed to 30 - 40 times per minute. And subsequently developed in constant blinking. BUT this flicker only happens when I go to the Office at 100 Hz. It happens sometimes in games, but not constant.

  I first thought that I had a bad cable of DP since I used one from Amazon, if I swapped it for the Acer cable included. Nope... same problem. I even inserted my previous EVGA 780 TI... but the flicker that happens too.

  Then, I thought it was a driver problem, I did a clean install of the nVdiia previous drivers. Nope. Then a cleaning installed latest drivers from nVidia WHQL. Nope.

  Then I saw here that you can download the drivers for the monitor directly from Acer. So, I did a guy like an unsigned driver installation. Nope.

  After all this, the problem persists.

  Strange thing about this one is that there was when I first got the monitor but got progressively worse since I got it.

  Another weird thing is that if I have a window open, then it isn't twinkle... reduce the window, and he comes back. It's actually what made me think, it was a driver issue, but as you can see above, I think that I have ruled that that fully.

  Also, if I set my refresh rate to 95Hz or below, the problem occurs. (This is actually how I currently work).

  -UPDATE: the issue has actually started just after executing i1Profiler to calibrate the screen several times back to back. I can't imagine how, but could the rapid exchange of multiple colors full screen damaged electronics somehow? Or is it just a weird coincidence?

  -UPDATED #2: it was suggested that ADC can cause the problem as it caused problems with the previous Acer monitors. So I completely deleted i1Profiler and reset my default .icc profile. I also think that I figured out how to do a monitor factory reset - if you hold the buttons first and fifth, restarting the screen and all the default settings. in any case, does too and the blinking persists...

  #3 problem: Backlight horrible bleeding

  I have to type anything here? Leave some pictures to speak for themselves...

  

  

  Trouble #4: Parts of the screen does not not on

  It has been described elsewhere, so I won't detail it here. But yes, I have the same problem. Here is a representative of my monitor picture when the issue arose.

  

  Overall, I am extremely disappointed, although I can't say I'm surprised. I mean, we deal with Acer here guys... Not exactly known for the high-end products. You can put the red lipstick on a pig...

  So is there more any idea or suggestion out there?

  Until then... I'll wait for my new X 34 excerpt here from Newegg to see if I won the lottery of Acer he...

  I created this post to be a "accepted solution" to this thread with the purpose to help other users who need to find the answers. This should help to find this information faster than to have to go almost 800 posts to find pieces of information.

  Wake up from sleep (backlight) - initial response and follow-up

  Problems with Overclocking at 100 hz - original response

  Coil - Whine Original response

  Color banding - users in Australia reported the problem. The teams in the region to THE have been notified and a firmware is available.

  -Scanning lines Original response

  Thank you
  Cory