MapField show a mask stripped map

Similar Questions

• I want to change my MacBook, but I can not connect at all to my account. It won't even show the mask connection on page of adobes, safari keeps trying but fails.

  I want to change my MacBook, but I can not connect at all to my account. it won't even show the mask connection on page of adobes, safari keeps trying but it keeps research fail.: https://IMS-NA1.adobelogin.com/IMS/authorize/ ... but nothing happens. Not on my computer, not on the mobile phone. the same problem. Cookies are okay and I never had this problem before.

  Hi Rahel,

  Please see Creative Coud connection errors

  Hope that helps!

  Kind regards

  Sheena

• Two questions on MapField (GPS permissions) and the map display

  Hello world

  I have two questions about the use of the Mapfield (for OS 5.0):

  First of all, it is possible to invoke the Permission of GPS is fast at the start of the application rather than the first time, you open the card and use the GPS?

  Second, I use a MapField in my application, and the map that appears on the device is only to show a green background with diagonal black lines and circles white - as if there were no card information to show. I tried to load many different places, and I get the same result. On the Simulator, I get the most actual plan information.  Does anyone know why this might be happening?

  Thank you!

  regarding your first question:

  use an applicationpermissionsrequest for that object.

• Old devices still showing in the network map

  I can't get rid of the old devices/computers of the NM network map. I remove them from the map but some time later, probably after a reboot, they show once again. Any ideas? I have the E3000 router if that makes a difference.

  Thanks, that did the trick.

• How to show pins on the map of bb using 5.0 API

  Hi all

  I'm developing an application to watch that i card and writng following the code

  but it shows pin on this card for 5.0 level API O.S.

  MapView mapView = new MapView();
  double lat = Double.parseDouble (ifAgentSearchInfo.getLatitude ()) * 100000;
  latInt int = (int) lat;
  Double lot = Double.parseDouble (ifAgentSearchInfo.getLongitude ()) * 100000;
  int lotInt = (int) batch;
  mapView.setLatitude (latInt);
  mapView.setLongitude (lotInt);
  mapView.setZoom (2);

  MapsArguments mapsArgs = new MapsArguments (mapView);
  Invoke.invokeApplication (Invoke.APP_TYPE_MAPS, mapsArgs);

  Thank you all

  Hello

  It seems that you use inbulit map of passage of argument...

  String document1 = ""+""
  + lon1 + "' y =" > "

• MapField showing not

  I have an app on my phone (Blackberry Storm) and when I try to view a MapField says "Your current default Services do not allow access to map data." How can I change this? BlackBerry Maps is installed and my application has all the permissions granted.

  You need a service for the use of mapfield record. but to get the map on the net. You can enlarge and convert values anyway.

• Windows 7 64 bit... ""? "shows"See the whole map"in the network and sharing Center window"

  Hi guys

  I've been struggling with this problem for a few weeks and need help. When I open the control panel; Network and Internet; "Network and sharing Center", at the top of the page to the right, I have an option to view the connections of the network (see map). The opening I find a big blue '? ', with 2 solid lines from my computers to the "?", with the word "Unknown"under the present'?", then 2 solid lines go to the router... It's a wireless network must therefore a double line broken and not solid and obviously not '? I can fix this problem by changing the Properties tab 'Advanced' from the WiFi transceiver on each of the computers. Once I click OK, the computer the fact thing... and the blue "?" disappears and the network is 100% functional. Putting computers into sleep or restart... and I have the '? ' on the respective computer which itself was removed from the network after a reboot. This happens on 4 computers on the network, all the Windows 7 64-bit, 2 notebooks, desktop computer 2!... Still problem, all corrected in the same way. Until the '? ' is corrected I show other computers in our network at the bottom of the window under the label:-"the following peripheral discovered may not be placed in the plan.» Click here, etc. etc. Once all 4 computers are patched, I show a perfectly displayed network... I'm open to any ideas... Thank you

  The question mark appears when you return from sleep if interconnect them (Network Interface Controller) is allowed to turn off to save power.
  This can be disabled if you wish

• Problem on chart show and see the map

  Hi all

  I use a simple program on target RT 1071 PXI with a DAQ 6356. The program works well, but the results on the table and the graph are not what I want.

  The timeout for data acquisition is defined as 0.1 s, so the result on the chart updates every 0.1 s. However, I want to get the running total from the beginning to the end. What a change, I need to do to get what I want?

  And I did not understand the result in the table of waveform. Is there something wrong with it in the program?

  Thank you

  Best regards

  

  I don't know how you have implemented your task of the DAQ Assistant, but no doubt you are acquiring blocks of data.

  I think of each iteration of the loop, as the chart shows only the most recently acquired piece of data and the chart is them accumulate and retains only the last 1024 points (not pieces, but points) because by default the length of 1024 points chart history, maybe what you need is to set a greater length of history (right click on the graph).

  Hope this helps and if not put a screenshot of the front panel and explain what the chart & graphical display (instead of what you want) because at this moment I am only guessing.

• The SRM - resources Site showing as incorrect inventory maps

  Hello

  Before we start I'm new on 'hands-on' SRM, so please excuse the lack of agreement.  I use two clusters HP P4000 SAN, the two sites-A and B Site using vCenter 4.1 and SRM 4.1.0 - 267817.

  I am setting up the RS interface for the first time and have so far:

  > set up the "connection" under "Protection Setup" and have a status of connected.

  > set up "picture frames" under "Protection Setup" and have configured status.

  > installed the P4000 SRA on both vCenter servers.

  > Configuration remote regular snapshots and replication is complete.

  In the management group configuration, I installed a Site as a protected Site (Production)

  In the management group configuration, I installed Site-B as the recovery (DR) Site

  This configuration wizard to finish I get the message saying "replicated volumes could not be matched with inventory data warehouses.  At this point, I guess that's because inventory maps were not yet Setup.

  In the configuration of mappings of mappings of inventory under "Configuration of Protection", you have two columns, protected Site resources and second Deposito Site.  This is the crux of the problem... Site-B (DR) is indicated under "protected Site resources.

  According to the Documentation of SRA HP P4000, "protection site is the site that is being replicated to the.
  recovery to the recovery site. »

  Please help, I'm fooled!

  That's right

  See a local and that SRM/vCenter you work remotely.

  So basically if you replicate storage of Dominican Republic production, you could do with bidirectional failover.

  As mentioned, you create the Protection groups on the Production site

  You create on the DR SRM/vCenter site recovery plan

  concerning

  Please allow points if you find this useful or correct

• My Firefox home page shows a mask on a shield instead of the Firefox icon. How can I stop this happening?

  (as above)

  Hi stanjnz, this is just a temporary promotion of tracking protection feature that's landing in firefox 42.0 - homepage will be 'back to normal' on its own again in a few days, without any further action required...

• Just added new credit card at our shows. It says map not available

  Add new credit card at Apple Watch. It keeps saying card available?

  Please specify where and in what circumstances you see this error message (for example: in the app to watch on your iPhone, on your screen saver when making a payment in a store).

• can I create a saturation mask based on a gradient map?

  Hello

  can I create a saturation mask based on a gradient map?

  for example a gradient from blue to 2441f6 to 6075f6

  and have a mask of luminocity base this gradient

  can I do it?

  How can I do?

  Thank you

  see you soon

  Gradient cards are not used to the color of the sample, but for her recolor, so that you cannot use to create the selection, use the selection to limit the gradient map for the blue areas of the sky.

  You can HIDE a gradient map using the saturation of the sky for her recolor, based on current saturation of the sky.

  Select the sky with your preferred method, he jumps into a new layer (CTRL + J)

  Use the technique in the tutorial linked to extract the brightness, it should land on its own layer.

  This layer and remove the selective color.

  Now add your Wo gradient map layer, enter the two colors you like.

  Display the layer with the saturation converted into a layer. Select all, copy.

  ALT-click the layer mask to your gradient map adj layer and the dough. You will need to paint black areas that you don't want affected.

  I tried here, and had yielded results satisfactory semi in view of the very high compression of your file and also because the colors are quite unrealistic.

  Here is a picture showing the mask of saturation and results on the side:

  

• MapField hangs if BB Maps not installed

  I thought I'd try this as a new thread:

  I checked that there is a dependency between the MapField class and the BB Maps app.

  If BB Maps is uninstalled, then Mapfield Builder crashes and vice versa.

  I did this experiment on the storm less than 4.7% and the 8330 under 4.5.

  I found this problem originally on the AT & T "BOLD" as it is without BB cards installed.

  It is a problem of HUGE in my opinion software architecture.

  More information anyone?

  What is the workaround? -make all our users install BB Maps?

  I'd appreciate any comments or audits.

  OLAF

  There is just no real API BB for Google not maps - I run the program using ApplicationManager.

  There is a hack to run Google MAps here:

  http://www.BlackBerryForums.com/developer-forum/143263-heres-how-start-Google-maps-landmark.html?HIG...

  If neither are installed, we have a dialog box asking the user to install one or the other.

  You may be able to install BB Maps on the device from AT & T, but in my experience the theme AT & T still hides the icon and prevents the application to be started by the user (although you can still use the MapField if you are on 4.6 or later).

• ACS 4.2 RSA Authentication and LDAP group mapping

  Hello

  I have a firewall, PaloAlto, with overall protection enabled (SSL - VPN) feature

  I use Cisco Secure ACS as a proxy for the RSA SecurID authentication.

  After authentication is try to map ad through LDAP query groups.

  The question I've found, is that the user I get with user authentication has no field:

  Show user ip-user-mapping all | mbm60380 game

  10.240.1.24 vsys1 UIA 2388 2388 domain\mbm60380

  10.240.1.1 vsys1 UIA 2101 2101 domain\mbm60380

  10.240.250.1 mbm60380 2590859 2590859 vsys2 GP

  But the list of users that I receive from the LDAP query includes the domain prefix:

  See the user group name domain\group1 property

  short name: domain\group1

  [1] domain\aag60368

  [2] domain\ced61081

  [3] domain\jas61669

  [4] domain\mbm60380

  [5] domain\pmc61693

  [6] domain\vcm60984

  I would like to create the user with the area of GBA but it must delete the domain before querying the RSA server, as it does not support field stripping.

  I tried to fix this on the Palo Alto firewall without success.

  I'm trying to run Cisco Secure ACS 4.2 changing, but it did not work either:

  RSA servers are configured as an external database.  They are not defined in the groups of network devices.

  Can I set up domain stripping for queries servers RSA?

  Thank you

  Hello

  I think it should work, but it is a bit awkward:

  Create an entry in the Distribution of Proxy in the Network Configuration.

  DOMAIN\\USER *.

  Prefix

  Before returning to the AAA server, from there to authenticate to the server RSA without the domain prefix.

  Make sense?

  Thank you

  Chris

• Image to TIFF conversion has a "mask" in the window

  Something weird is going on an image I airbrushed.  I have it touched up in Photoshop and saved as a .psd. Then I flattened the image and saved as a .tif.  Now, when it downloads and someone looks in "Preview" (because they do not have Photoshop), it shows a mask that is a layer of the .psd file.  While I could attach the file to this thread I saved as a .jpeg... then 'Preview' it does not show the mask!  I did a screen capture, however, the TIF opened in 'Preview' and it is attached.  When I opened the .tif file in Photoshop, I don't have this problem.  Only in "Preview".

  Thank you.

  The tif you are viewing in preview has an alpha channel, that is, when you work on the tif in Ps, you saved a selection as a channel. Confused Preview in the presence of alpha channels and displays as you noted in your example. Solution: the alpha of the tif Strip before you save it.

  BTW, good mine jpeg format is because this format does not support alpha channels.