Mark as 'Good answer' and 'useful response '.

Similar Questions

• I can't use my cd/dvd drive. It will let me play cd, dvd or burn CDs. I am not tech savvy at all, so be as specific as possible with answers and use terms laymens.

  Error message reads as follows:

  A drive with a format not supported in drive E: when I try to play a dvd with power dvd.

  Windows Media Player says there is no disc in drive E, even if he doesn't.

  Hello Charitylmc,

  Thank you for your message.  You are not able to play any CD or DVD, or is this just happening with one?  If it's just one, it could be that the disc may be scratched or damaged.  So what happens with all DVDs, click HERE and then run the FixIt!.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• After 13 updated both the system rebooted and now as he begins to install XP it autorestarts. It will not recover to the last known good config and delivers a message of corrupted config file.

  Any ideas?

  Thank you

  Frank

  You will share exactly what the message of the corrupt config file says?  My crystal ball takes off the second Wednesday of each month.
  If your system reboots continuously, the next time the system reboots, start tapping the F8 key until you see the menu Boot Options Advanced XP.  On the Advanced Boot Options menu, select:

  Disable the automatic restart in the event of system failure

  This will display the error message that you don't see when the system restarts.  This is what Windows is supposed to do when there a failure - it is supposed to automatically restart.  The error you see on the screen has your clues...

  If you do not see the menu Options start Advancded or you do not have to turn it off automatic restart on option system in the list of choices, you need to try again until you do.  Start typing the F8 key earlier and more frequently as your system begins to come alive.  If you miss the window of opportunity F8, you must try again.
  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)
  ?
  Most of the time (in recent memory) when there is a problem after installing Microsoft updates, the problem is because the computer was somehow afflicted before/when updates have been installed and updates simply bring to the surface a problem that was not evident before.
  If the last thing people remember is to install the updates from MS, it's am understandable reaction in some way involve updates for updating the post problems when things don't work properly afterwards and especially during the next reboot.
  Another reaction is to try to remember all of the updates you have installed and somehow uninstall the updates one of the XP Recovery Console until you find one who is 'responsible '.  Unless you noted all issues of update, it would be more difficult, but not impossible.  It is unlikely that practical or useful advice in most situations, but you can of course try it.
  Security updates sometimes holes patch XP and when security holes are patched (and XP is "tighter"), affliction can no longer do what is done, things to happen are no longer allowed to happen as a result of the strengthening of security, the system has now a new problem (especially when it initializes more) , and it seems that install updates broken system while in fact, it's just a coincidence.
  Another thing that can happen is that the Microsoft updates will change or update certain critical files on the XP system.  Depending on what your software antivirus or antimalware software is, these programs can interpret the new or updated files to day as being a threat or somehow infected and quarantine (effectively delete) files it thinks are wary.
  The next time you restart your system, you'll have some sort of a problem, or you do not start if the files are missing.  Once more, the problem is not with the updates, it's another condition on your system with your antivirus or antimalware programs you beautiful little (they could be aware of what like the new look of Microsoft files).
  You may have seen some or heard talk about some of these kinds of people, but not too intellectually stimulating general or scenarios of error after update:
  NTLDR is missing or corrupt, ntdetect.com is missing or damaged, ntoskrnl.exe is missing or damaged, hal.dll is missing or corrupt, etc.
  These types of errors are usually very easy to fix, but if you don't know what's happening, the temptation is to do a repair installation, or if none of these kinds of things are really necessary, completely reinstall your XP.  I have never done a system restore, a repair install or reinstalled XP in my life to solve any problem (but I did the process for practice).  These things are simply not options with me.
  Given that Microsoft sends many updates on the second Tuesday of each month (they call it "Patch Tuesday"), this means that the or to the second Wednesday of each month there is an increase of 'problems' in the field - in particular the types of problems "my computer does not start after you install the updates from Microsoft.  That day is also known as "exploit Wednesday".
  You can read about it here: http://en.wikipedia.org/wiki/Patch_Tuesday
  It is likely that if you have a problem like this or after the installation of MS updates, someone else has also had the same problem and understood what to do about it.  A problem here, is that no one knows what is your problem.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• I asked a question on the level of play in spades and I can't mark the correct answer as the answer?

  The question was answered and I tried the solution and it didn't work.  Since then I've played Spades and got frustrated and tried something new and here's the level has changed.  I came back to close the question, and after checking the help for more information on marking answered, I entered my own response thinking I could mark it as the answer in my e-mail so I could close the question.  Well I can't do that and I will not mark the wrong answer as the answer.  Now, I realize that microsoft probably protects against someone who uses the forum forum or whatever, BUT I want to really close the issue and I only care that someone else uses the correct way to change a level if they like card games to play like I do.

  You deleted the other person "right answer" and you cannot mark your own reply as an answer.

  I am happy to score your answer as being correct.

• Cannot mark the answers as useful - please help

  Dear Mods/Admins,

  Firstly my apologies for the creation of a discussion to the question where the solution is already given.

  I can't mark as USEFUL responses to my thread https://forums.oracle.com/thread/2559964.

  As I can't see the useful option of brand because it.

  Could if it you please mark it as a question? or let me know what to do on my end. While creating, I marked the thread as question and few answers have been marked as useful as well, but after editing, I'm not able to find this option.

  Thanks in advance for your support.

  See you soon!

  Billon

  Hi Bhaskar,

  Wire SOA/OSB - a few interview questions: Please help

  is already marked as a question, and I see that already two answers are marked as useful. There is a limitation in the forums up to two answers can be marked as helpful by discussion.

  So I think, you won't be able to mark the third reply as useful.

  However, you can mark it as correct, but it is up to you.

  Thank you

  Varun

• I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I have challenged their load m

  I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I thought them charge me twi

  Can I have it please the number on I tunes support whether please or have them call me at * Leonardo B *.

  < personal information under the direction of the host >

• When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again.

  When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again. Anyone out there have the same problem? If so what did you do about it.

  Original title: I'm under Oulook Express 6 Windows XP Home SP3 environment.

  Bruce:

  The problem has been fixed (I think) but in a most unusual way. Let me explain.

  When I was closing down to give the computer a rest yesterday, there was a pop up saying that vprotector expected to close. He really wanted the process of closing until I clicked on finish the process. Curious to know what vprotector is, I searched on the net and got a lot of shots, saying: it is a virus and should be deleted pronto. So I searched the hard drive for the vprot. * and found in the folder program files for AVG!

  I then went to AVG to see if it's really a part of AVG and they said yes. If there is a problem with vprot, the toolbar is at fault and needs to be reinstalled. There was one click here to download and run the part of the program to fix the problem. However, I had WebRoot antivirus running that stopped the download of this program as a virus. Because I trust AVG, I've disabled WebRoot and reinstalled the AVG search bar.

  I haven't restarted WebRoot and computer flying along as it should, and OE is the link to IE when I click on a link as it has always done.

  Seems to me to be the faulty AVG toolbar and a cross with two virus programs upward was at fault. Thank you for your time. Your reply gave me a chance to think differently this problem could arise.

  Computers are really complicated machines and we have to be complicated to deal with their problems.

  Thanks again,

  Fred

• You want good answers? Ask good Questions.

  Here are some tips to get the best answers in the forum:

  Search before you post using the 'Search' box to see if someone has already asked and answered your question.  If you want drivers Start here on the HP site and enter your model number, then the operating system.  Similarly, there are pages troubleshooting for many of the most common questions.  Start at the same link in which case the pilots, but click on the link "Solving a problem" after you enter your product number.

  Use the Forum, do not send this way others can contribute to and benefit from the answers.

  Write good titles offered a description of the short problem and your printer model in the title.  A title such as "Cartridge in Officejet 7410 error" will be more likely to get a response than a title like "cannot print".

  Provide details remember to provide relevant information, including:

  • Description of the problem
  • Printer model
  • Operating system (including service pack revision)
  • Method - USB, LAN, Wireless cable connection?
  • Error messages - on the screen of the printer or computer, no matter what flashing light patterns.

  Watch for your comments subscribe to updates to your issue by e-mail and/or check your question frequently for responses.  Respond quickly to any request for further information. If you're having trouble finding your questions, you can connect, then click on your username at the top left.  This will bring you to a page that will show you your stats, including your messages.

  Be Patient please be aware that this forum is a peer to peer support forum, it's not a direct link to HP support. People here are for the most part voluntary, answering the questions on their time.   If you do not get a response within a reasonable time (a day or two) do not repost your question or post a "bump".  Re-read your original post and if there is more details you can provide, then write a follow-up post in the original thread.

  Say 'Thank you' when you get an answer to your problem of recognizes the solution.  If the answer is useful mark with "Congratulations" by clicking on the button of congratulations.  If your issue is resolved then mark it as resolved using the button "accept as a Solution.  This will help others to solve similar problems.  Accept that the Solution is available to the poster of the original question in a thread.  Congratulations button can be clicked to all messages that will be useful.

  Hello

  Very good suggestion. I floated it to the top of the son so that he will be on top.

  Park

• Drag and Drop - response schema complex

  Hi guys out there.

  I've set up interaction drag-and - drop, who's looking good, but I can't Captivate to recognize the answers correctly. Please could you help?

  I have three sets of slide sources one (2), B | (7 sources) and C (7 Sources).

  I have two boxes X and Y.

  I want has to be deleted only in X

  I would like to B to be deleted only in Y.

  I want that C had to be abandoned in X or Y - or the other is a good answer.

  For some reason, Captivate is never correctly mark the answers. I suspect it is the sources of drag 'C' the origin of the problem, but I'm not sure.

  Can you advise how I should set up correctly?

  Here is a link to the output: http://blendedlanguagelearning.com/portfolio/Test/10Sept2014/TestOnly.htm

  I can provide the source files if needed, but they are great.

  Thank you very much!

  
  Seth

  Well, I think I have a solution feasible for you, if it'll take a bit of tedious configuration. I'll assume that you are familiar with the Types of Interaction, or watch this video (http://youtu.be/B_wVtH1Vsck?list=UULpsk3UF7lh5l9fVkLIqu6g) because they are essential to keep this manageable configuration.

  In short, you put each set of sources in his own Type of Interaction and then create a combination of answers separate for each of the 8 possible indictments of category C.

  If there is a more simple or more elegant solution, I can't think about it right now. Maybe someone else can, but this will produce the functionality you're looking for, I think.

  (1) name your drop targets in the property inspector. I used Drop_X and Drop_Y in the screenshot below.

  (2) select your category 'A' Sources of drag. On the Drag and Drop tab, click on the button + to create a new type of interaction. Name the type of something easy to distinguish (I used "InteractionType_A).

  

  (3) repeat step 2 for your category 'B' and 'C' Sources of drag, so each has it's own unique Interaction of its kind.

  (4) Begin defining the right answers. I began by assigning A-> X, B-> Y and C-> X. You can see on the left side of the screenshot below.

  (5) now the difficult part. Click on the button «Set Correct answers...» ». You should see a "Answer1" just like mine in the screenshot below, but with two target Drop names and names of all Type of Interaction you have used instead.

  6) click on the 'Add a new reply' button at the bottom of the window. You should now see a Virgin "answer2" below your "Answer1".

  7A) make your "answer2" look just like mine. The first two lines will always be the same, (target Drop = X, drag Source = A, Count = 2) and (target Drop = Y, drag Source = B, Count = 7). Unfortunately there is no copy and paste or duplicate function here so you'll have to implement from scratch every time. You also need to click on the + to add the fourth line.

  7 (b) the only thing that will change for each new answer you add will be the 'Count' on lines 3 and 4. Start with (Count = 6), and (Count = 1) and adjust the number by 1 for each new answer, making sure they always add up to 7. (5, 3 4, 3 4, 2 5, 6 1, 2and 0 7).  When you are finished, you should have 8 combinations of single response and a strong desire to never touch another drag and drop interaction.

  

  I hope that all makes sense. Good luck!

• I'm new to this Forum, I had removed and used my recovery disk on my PC I don't know I need help

  Hi everyone I am totally new to this site acually it appear on my screen and I was told to go to a certain place on Microsoft, I have windows Vista, so I went there and it was ok, then he said that I didn't have something, I'm sorry, I don't remember but I know it has to do with something fixing , and Microsoft would help, anyway is to give you a general idea, some time ago when I type the letter e, it won't come out, now this is the case, what I think I do is updated, perhaps windows Pack1? or 2? someone has an idea, also I have a DVD of Microsoft, which said 8.5, which should I install? There #s with the DVD follow-up, it's for the new computer, but my husband says it's just for office stuff, is this Microsoft Security Essentails locality. A place to have a good free security for my PC? Please help with anything if you can, I'll be so gratful, sincerely your friend Colleen206

  Hello

  If you want to install service pack 2 for windows vista, see this link

  http://support.Microsoft.com/kb/935791/

  Service packs help keep Windows Vista up-to-date, and they can extend and update the functionality of your computer

  Microsoft Security Essentials offers protection in real time to your PC at home that protects against software viruses, spyware and other malicious software.

  http://www.Microsoft.com/security_essentials/

  If you are facing problems on your windows machine and want microsoft to fix it for you, run the microsoft fixit tool

  http://support.Microsoft.com/FixIt

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Change 'useful' response to 'correct '?

  I have a few "can I do this or not" questions, for which I have marked an answer as "useful", hoping that a poster later would provide a response that would achieve what I was looking for. Now that some time has passed and I have received no new response, I know that I can mark it as "answered", but I can change the 'useful' points, I got to "correct"? I would like to send a few points more to these people who have helped. Sometimes "no, you can't do that" is the right answer even if I hoped at the time when it was not.

  I don't think that it is possible to do. You can add a comment indicating that a specific position by one person in particular was most useful, so that she may help future readers. Or change your behavior to not order the points after having evaluated/tested responses and are ready to mark the thread as answered.

  BTW - points are meaningless ;-) Re: how the points work?

  HTH
  Srini

• If the declaration for a wrong answer and right

  
  OK, Hello and thanks for posting. Includes the project

  1 breakdown of the ISSUE

  2. you enter your answer in a text ENTRY box

  3. click on enter - button.

  4. There is a wrong answer which is Ox and the correct answer is O

  4. According to your response it jumps you to the screen wrong answer or congratulations!

  
  the inserted code is different from the book,

  It shows that;

  on (release) {}

  If (½la is "Ox")

  (_root.answer.gotoandplay (5)})

  Then theres another

  on (release) {}

  If (response == Ox) {}

  gotoAndPlay (5)

  (5) = the good screen and (10) is the incorrect screen if they choose = O

  the variable for the input text box = response

  Thanks for your help

  only a fool would require coding attached to your button.  If it's your teacher, you have an incompetent teacher unless they're trying to make a point about the problem how it is for attaching code to objects.

  Use a real (not a movieclip) button:

  {We (Release)}

  {if(iTF.Text=="OX")}

  _root. Answer.gotoAndPlay (5);

  } else {/ /}<- this="" is="" probably="" what="" you="" want="" instead="" of="">

  _root. Answer.gotoAndPlay (10);

  }

• I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard

  I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard.
  Vista makes my headphones 'speakers', so when I use a program called ventrilo to talk with other players in my game sounds are heard through ventrilo. My headset is a headset/microphone generic plug-and-play.

  When I run not WoW, I can hear my own voice through the headset speakers when I talk.

  I want my headphones to work so I can hear my friends talking and the sounds of the game, but I don't want the game sounds to be filtered on the server for voice chat

  Any help would be much appreciated. I asked the same question to Geek Squad and their response has been to try to charge me $49.99 + tax for one of their "agents" can remote in and fix it. Do not use them unless you have: P

  Hey CassiusVa,

  Welcome to the Microsoft Answers Forum!

  Since when are you facing the issue?

  Can I know the version of Ventrilo you use on your computer?

  It may be that World of Warcraft focuses on your audio hardware.  You can try to reduce the audio settings in WoW to see if this makes the use of Ventrilo better.  It may also be a driver problem.  I would check to make sure that you have the latest drivers for your audio device.

  Use the following steps to ensure that the audio drivers are up to date.

  1. connect to the Internet.

  2. click on start and enter the Device Manager in the start search field.

  3. click on the plus sign next to sound, video and game controllers.

  4. right click on the name of the sound material and select software update of the driver...

  5. click on search automatically for a driver updated and wait for Windows to update the driver software.

  6 Windows checks a remote Web site to see if the update of the driver software is available.

  * If an update is available, let Windows install the update.

  * If an update is not available, proceed to the next step.

  7. once the update is successfully installed, test the microphone.

  Please follow the steps below and check if you still have questions echo.

  Go into Ventrilo Setup and select mixer for the sound card, which will be the audio input (as determined by the "Input device" option) device. This will populate the Mux and line options. Normally it would take only a Mux. It is possible that you may have many options of the line. Go ahead and select "Microphone" or anything that is appropriate for the input line and then click OK.

  This should solve the problem.

  Please note that you select mixer, mux and line will allow the "Hardware Volume" slider This gives you the control hardware on the audio input signal and is the best way to control how strong you are. Setting the cursor to halfway better seems to work for most people, but it will be hardware and system load.

  You can also browse the links for more information on ventrilo and try to contact them if the problem persists.

  http://www.Ventrilo.com/FAQ.php

  http://www.Ventrilo.com/about.php

  http://www.Ventrilo.com/dlprod.php?id=1

  Let us know how it works.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to configure the Windows speech recognition and use gtalk and gmail?

  Original title: Windows Vista speech recognition program the

  Trying to learn how to use the program of recognition of the window so that I can help a friend who has very high served as his hands. I'm getting the hang of it, but I need to know how to use Windows RV with gmail, because that's where we have been typing his e-mails for him, and is where he'd like to read his mail. On my own page of gmail, I am able to use the "numbers" for everything except actually typing in the main field, where he would actually type emails. Anyone able to help?  Max of TIA

  Hello
  • What happens when you click on the text box and dictate?
  • Also, try to use the HTML version of gmail and check.
   
  1. in Windows vista speech recognition.
  I've collected some articles from the Microsoft Knowledge Base that will help you in until the speech recognition settings.
  Windows speech recognition
  http://www.Microsoft.com/enable/products/windowsvista/speech.aspx
  Set up speech recognition
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-speech-recognition
  Setting speech options
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-speech-options
  What can I do with speech recognition?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-can-I-do-with-speech-recognition
   
  2 on the use of speech recognition on gtalk you can ask your question on the forums of gtak. Here is the link.
  Voice and video Chat
  http://www.Google.com/support/forum/p/chat/label?lid=18819d87e4369fa5&hl=en
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How do I answer to a response in this forum?

  It is individuals, type admin forum question.  I would like to know how to use the reply function on a response to a post I made?

  Thank you.

  Hello

  Please click on answer, and you can type text in a reply box then click on publish

  Kind regards.