Mark in a string passed
I'm trying to send emails to parents of school-age children.On the "create a message" page of the form, the user can select one or more grades that an email should go (checkboxes in the entry), and those who passed as a string ('K, 1, 2"). On the action page, I try to query a table of subscriptions (record is e-mail, school, Grade) for grades passed. There may be more than a year for a given email if one parent has two children, for example.
I am passing the string very well. So we can store the qualities that the school got what email I'm saving the string to an array of messages. But when I try to use it in a WHERE statement, he died on me.
Is it still possible to do? Should I pass grades in different ways?
The code below IN your problem.
Tags: ColdFusion
Similar Questions
-
: Error #2101: the string passed to URLVariables.Decode must be a query string URL-encoded containing name/value pairs. to Error$ /throwError () to flash.net::URLVariables/decode() to flash.net::URLVariables() to::URLLoader/onComplete() _ flash.net stop(); var DepartVars:URLVariables = new URLVariables(); var DepartURL:URLRequest = new URLRequest ("scripts/www.mywebsite.com/depart.php"); DepartURL.method = URLRequestMethod.POST; DepartURL.data = DepartVars; var DepartLoader:URLLoader = new URLLoader; DepartLoader.dataFormat = pouvez; DepartLoader.addEventListener (Event.COMPLETE, completeDepart); depart_btn.addEventListener (MouseEvent.CLICK, DepartUser); Function to execute when you press the start function DepartUser (event: MouseEvent): void {/ / Ready variables here for shipment to PHP DepartVars.post_code = 'Start';} Send the data to the PHP DepartLoader.load (DepartURL); welcome_txt. Text = "processing of application...". Good journey. " } / / Close function DepartUser / / / / / function for when the PHP talk back to Flash function completedepart(event:Event):void {if (event.target.data.replyMsg == 'success') {var refreshPage:URLRequest = new URLRequest("javascript:NewWindow=window.location.reload();)} NewWindow.focus (); ("void (0);"); navigateToURL (refreshPage, "_self"); } / / CompleteDepart close function / / / / / View Code for the res button var viewRes:URLRequest = new URLRequest ("view_res.php"); viewRES_btn.addEventListener (MouseEvent.CLICK, viewResClick); function viewResClick(event:MouseEvent):void {navigateToURL (viewRes, "_self") ;} / / / / / / / / Code for the edit profile button var editRes:URLRequest = new URLRequest ("edit_res.php");} editRES_btn.addEventListener (MouseEvent.CLICK, editResClick); function editResClick(event:MouseEvent):void {navigateToURL (editRes, "_self") ;}}}
you need a function named completeDepart to handle the return of you php script. for example:
function completeDepart(e:Event):void {}
trace (e.Target.Data);
}
-
Hello world
I had a problem with frame incredibly ([ttom]-[extreme novice]). I'm trying to update the program to a former colleague who left a playback feature 2D bar code.
The barcode scanner is configured to act as a virtual keyboard and captures the data into a string which box I then passes to another chain box and clears one so that the next barcode is not added at the end of the last reading. But for some reason, the first string box clears successfully, but the second string is never updated.
For the life of me I can't understand why. The image below is the main while loop. Tried to look through the internet without a bit of luck, I hope you all can help.
ttom321 wrote:
You are constantly control with this compensation property node. Get rid of the part Val (Sgnl) of the property node.
-
string passed to a loop var name for? Table question
I have a set of variables of type string named q1String where 1 can be replaced by a value between 1 and 17.
So I have a loop for:
for (var i = 1; i < 18; i ++) {}
var question_caption_mc:Question_caption_mc = new Question_caption_mc;
* question_caption_mc.caption_question_string. Text is q + i + String; *.
}
The "BOLD" line will cause an error because q is evaluated separately, I is evaluated separately and String is evaluated separately. I should probably use a user name different in my definition of the string variable, but I was wondering how to properly pass the variable name in the loop for that
"question_caption_mc.caption_question_string.text" is equal to the value of the variable q1String through q17String. I know it's simple, but I can't seem to find a way for this query on a search on the web for a thread or a similar solution.
Can someone help me solve this problem?
Kind regards
-markerline
OK, so basically you want to read the string from an array in a loop do you mean?
Currently your loop spit q '' i' ' string or q1String - q17String
so if you had questionsArray:Array = ['Palin's Alaska', 'reply to two']
for (var i = 0; i)<>
var response: String = questionsArray [i]
question_caption_mc.caption_question_string. Text = Answer;
trace (Answer);}
-
Data of type string passed to DDC_SetDataValues
Using the library of DIAdem connectivity, you can call DDC_SetDataValues to store data in a channel. If the string contains data of type string, what is the format for the parameter values? My guess would be a sequence of strings of character no back to back, but the API documentation does not say.
I figured this out. When the string data is stored, DDC_SetDataValues takes a pointer to an array of pointers to strings C, as DDC_GetDataValues.
It is documented for DDC_GetDataValues. It should also be documented for DDC_SetDataValues.
-
How to add quotation marks in a string
create or replace procedure flag (r1 in Varchar2, varchar2 IN r2)
IS
v_test varchar2 (8);
Start
If ((r1 n'est pas null) and (r2 is not null)) then
Select e, name
in v_test
from emp e, Dept. d
where e.deptno = d.deptno
and Object between r1 and r2;
end if;
dbms_output.put_line ('print the values' | range1 |) Range2);
end;
During the race above proc 01722 invalid error number.
R1 and r2 are the varchar values
Could you please let me know how to add quotes to r1 and r2 in order to eliminate the error 01722?
-
Convert 0 'fail' and 1 'pass '.
Is there an easy way to convert the numeric characters, the string 'pass' 1 or convert the numeric value 0 to the string "fail"?
This is a simple way, you can also use a case if more code is involved.
-
Passing an exit from a DLL to TestStand
I need to convert a VI in a DLL that will be used to the TestStand. The VI takes a delimited string of TestStand, it truncates a given length and retransmits it. The VI works fine in the sequence, but when I built it as long as DLL, it fails to return the output to TestStand. I don't really know if the problem lies in the settings of step TestStand, or how I built the DLL. Here are a few screenshots. Also, the length of the strings passed in is variable and I don't know what size to set the size of the len.
Hi Drewsali,
What I understand from your question, you have a string entry who went from Teststand, LabVIEW and Teststand back. Len determines the amount of memory of the input string for the transfer of LabVIEW. One possible suggestion would be to define a local variable that is equal to the size of your input string, and then to set the buffer Len equal to this variable so that it passes the size of the string each time. If you do not want to redefine the size of the buffer len whenever you enter a string, just make sure that you allocate enough memory for the largest input string you will be entered. Good luck with your project!
Kind regards
Jackie
-
Need a bit of help with the string read/write DLL
I have a DLL that communicates via RS232 with some instruments.
From 2 numbers (parameter number and a number of processes) the DLL will communicate and extract the values.
I managed to put in place the DLL to get words, characters, long and floats (single precision).
Now, it is the documentation that accompanies it for strings:
ReadString asks the DLL to get the data of the instrument, if succesfull I have others on call GetString to get the string memory.
I have a few questions:
-The values of her star (*) are pointers; As I understand it that it points to a place of memory where the value is stored, is - that correct?
-How do I know if I pass the value to the DLL, or read? For example with GetString Im not sure if
I should pass the length of the string to the DLL or if it is read
-How to get the character returned in a string; IM assuming I need to find somewhere a byte array.
Now I can also write strings:
As a matter of f:
-Should I add NULL at the end of the string, or labview does by default?
My procedure is now: read the input chain, reduce it to the size of the specified string (this is constant according to the setting of the instrument), converted to a byte array and replace the last element of the array with 0 (Null).
However, the DLL entry expected a character, that I should get in the DLL?
_Faust wrote:
I have a few questions:
-The values of her star (*) are pointers; As I understand it that it points to a place of memory where the value is stored, is - that correct?
They can be pointers or buffers. Which of the two is ambiguous in the syntax of C. However, in your case I suppose that piMsgId and pcLen be a pointer to a unique value and pszDest a string buffer.
-How do I know if I pass the value to the DLL, or read? For example with GetString Im not sure if
I should pass the length of the string to the DLL or if it is read
Description is not really clear however most of the C API require today the length of the allocated buffer at the entrance to make sure that they don't overrun the buffer length. They may or may not change this value before returning to indicate the amount of data they actually informed. The pcLen parameter passed by reference probably indicates that this function does this way.
-How to get the character returned in a string; IM assuming I need to find somewhere a byte array.
It is not necessary. You can simply set the parameter to a string and must be passed as a C string pointer. In LabVIEW 8.5 or more you can also configure to resize this string for the number of characters as indicates it a different setting of the library to compose the node (CLN), in this case your pcLen. 8.5 you can use a table to explicitedly initialization function create a table Bbyte of the length needed, convert the byte array to string and pass to the CLN parameter. LabVIEW will return automatically only the part of the string up to the NULL character if a CLN is configured as C string pointer
Now I can also write strings:
As a matter of f:
-Should I add NULL at the end of the string, or labview does by default?
No! If you configure the parameter is a string, passed as a string pointer C, LabVIEW will do it automatically for you.
My procedure is now: read the input chain, reduce it to the size of the specified string (this is constant according to the setting of the instrument), converted to a byte array and replace the last element of the array with 0 (Null).
However, the DLL entry expected a character, that I should get in the DLL?
-
Hey everybody,
I am learning to the LabView with a DLL interface, which uses Manager to create types in LabView. Currently, I want to return only a string of characters chosen from an array of strings passed to LabView. In this test, I want to explicitly create a new string in the external code. So, I created the following C++ code:
void element(TD1Hdl list, int32_t index, LStrHandle *element) { LStrHandle h = (*list)->elt[index]; // maybe resize instead of create new? LStrHandle newHandle = (LStrHandle)DSNewHandle(sizeof(int32) + (*h)->cnt); (*newHandle)->cnt = (*h)->cnt; MoveBlock((*h)->str, (*newHandle)->str, (*h)->cnt); (*element) = newHandle;}
Note the pointer over the handle, and I assign him in the end. I plugged it as below:
Note that nothing happens in the 3rd parameter.
now my question is:
-Is it possible? What is LabView with the 3rd parameter (pointer to pass to manage being NULL or create by default)?
-Is my C code that is safe (in addition to being able to specify an index that does not exist).
Thanks in advance!
Vincent
The leak memory occurred if you can run the following code:
So, in this case, you should check if handle already exists, don't create news, but only want to resize it.
In general, you should create new usually handles for elemenths table (if your items in the array are strings or clusters, but not numeric values - there special function for resizing digital paintings).
As I understand, you do not need to free these handles, because LabVIEW will do it for you (in any case, you can check easily - just run your code in the cycle and check the memory usage).
But personally, I felt a little dangerous to call DSNewHandle without DSDisposeHandle. Probably you can play with DSCheckHandle before DSCreateHandle, or use DSCopyHandle for trasferring new created/resized table to the destination, then you can release your temporary created handle.
Note, National Instruments shows help following: «...» "When returning a new array from a DLL, you must allocate memory for the array in LabVIEW. To do this, the easiest method is to enter a picture of a known length in the node to call a library function that is at least as large as the resulting array expected returned by the DLL... »
and then the example of NEITHER:
Andrey.
-
get message windows does not pass genuine validation
Hello, I had this message for the last week were not sure it comes! I got the same laptop for 4 years and this is the first time I've had this happen I'll post below the report of diagnosis (1.9.0027.0):
-----------------------------------------Validation of Windows data-->Validation status: blocked VLKValidation code: 3Code of Validation caching: n/aWindows product key: *-* - 3R89F - D2KXW-VPK3JWindows product key hash: Ro / Y7HENE9CfW7lW + QtlNbYQEE8 =Windows product ID: 76487-640-8365391-23084Windows product ID type: 1Windows license type: VolumeThe Windows OS version: 5.1.2600.2.00010100.3.0.proID: {C1ACD599-12EB-47E1-BEB2-12C167381152} (3)Admin: YesTestCab: 0x0LegitcheckControl ActiveX: Registered, 1.9.42.0Signed by: MicrosoftProduct name: n/aArchitecture: n/aBuild lab: N/ATTS error: n/aValidation Diagnostic: 025D1FF3-230-1Resolution state: n/aGiven Vista WgaER-->ThreatID (s): n/aVersion: n/aWindows XP Notifications data-->Caching the result: 3File: YesVersion: 1.9.40.0WgaTray.exe signed by: MicrosoftWgaLogon.dll signed by: MicrosoftOGA Notifications data-->Cached result: n/a, hr = 0 x 80070002Version: N/a, hr = 0 x 80070002OGAExec.exe signed by: n/a, hr = 0 x 80070002OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->Office status: 109 n/aOGA Version: N/a, 0 x 80070002Signed by: n/a, hr = 0 x 80070002Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1Data browser-->Proxy settings: N/AUser Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)Default browser: C:\Documents and Settings\Application Data\Google\Chrome\Application\chrome.exe adminDownload signed ActiveX controls: fastDownload unsigned ActiveX controls: disabledRun ActiveX controls and plug-ins: allowedInitialize and script ActiveX controls not marked as safe: disabledAllow the Internet Explorer Webbrowser control scripts: disabledActive scripting: allowedRecognized ActiveX controls safe for scripting: allowedAnalysis of file data-->Other data-->Office details:{C1ACD599-12EB-47E1-BEB2-12C167381152} 1.9.0027.0 5.1.2600.2.00010100.3.0.pro x 32 *-*-*-*-VPK3J 76487-640-8365391-23084 1 S-1-5-21-842925246-602609370-725345543 TOSHIBA EQUIUM P200 TOSHIBA V1.40 20070426000000.000000 + 0003CA83F07018400EE 0809 0409 Pacific Standard Time(GMT-08:00) 0 1 Rogue Black thugs XP 7.5 Edition [general] 109 License data-->N/AWindows Activation Technologies-->N/A--> HWID dataN/AActivation 1.0 data OEM-->BIOS string matches: YesMarker of the BIOS string: 867F:Semp Toshiba Informatica Ltda. 867F:TOSHIBA CORPORATIONMarker of OEMBIOS string. DAT: N/a, hr = 0x80004005Activation 2.0 data OEM-->N/Aany help would be greatValidation of Windows data-->
Validation status: blocked VLK
Validation code: 3...Post your log MGA here instead: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads
-
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: geographically blocked PID
Validation code: 13
Code of Validation caching: n/a
Windows product key: *-* - BTWWY - BT7KK-43MGM
The Windows Product Key hash: aXy2mV4Thv29k9i9NTmj/1zcWPs =
Windows product ID: 76487-640-2394127-23728
Windows product ID type: 1
Windows license type: Volume
The Windows OS version: 5.1.2600.2.00010100.3.0.pro
ID: {6E669CB2-A129-4E41-A386-274FB7E91F35} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: Registered, 1.9.42.0
Signed by: Microsoft
Product name: n/a
Architecture: n/a
Build lab: N/A
TTS error: n/a
Validation Diagnostic: 025D1FF3-230-1
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a
Version: n/aWindows XP Notifications data-->
Caching the result: 13
File: Yes
Version: 1.9.40.0
WgaTray.exe signed by: Microsoft
WgaLogon.dll signed by: MicrosoftOGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: Registered, 2.0.48.0
Signed by: Microsoft
Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{6E669CB2-A129-4E41-A386-274FB7E91F35} 1.9.0027.0 5.1.2600.2.00010100.3.0.pro x 32 *-*-*-*-43MGM 76487-640-2394127-23728 1 S-1-5-21-789336058-1383384898-1606980848 Notebook MIM2120 Insyde Software Corporation M1.00 20050909000000.000000 + 00079D13507018400F2 0809 0409 GMT Standard Time(GMT+00:00) 0 2 Powered by.: figures of the team:. 109 License data-->
N/AWindows Activation Technologies-->
N/A--> HWID data
N/AActivation 1.0 data OEM-->
BIOS string matches: Yes
BIOS marker string: Group of stores 1FFB9:Dixons | 1FFB0:Medion AG | 1FFB0:Medion AG
Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005Activation 2.0 data OEM-->
N/AYou use a license of Volume of Geo-blcoked for XP key.
If you are a member of a company the right to use these Volume keys, talk to your system administrator.
Otherwise, you have a copy of counterfeit Windows installed.
For what Windows edition version is allowed, according to the COA sticker on the computer case?
-
Orchestrator Timer Date Time String pending
Using VCenter Orchestrator - I have a workflow that will get kicked off via the REST API but the only option of entry, I have my users POV is a string.
The entrance to the user should look something like 2:125 9 mai 2016:50 PM or similar.
Is there a way for me to format the string/pass one string in the workflow and the value of the timer to wait on this entry object?
Any help would be appreciated.
Thank you.
OK, if you want to get a value of the user string and convert it into a Date object to be able to link it to the timer.date of the timer element attribute on hold?
The string to date conversion can be done easily. Here is a code example:
var datestr = "May 9, 2016 2:25:50 PM"; // user-provided date string var dt = new Date(datestr); // parses the string and creates an object of type Date System.log(dt); // log the Date object value
-
Extraction of the data from a string
Hi all
I'm using Oracle 11.2.0.1.0
CREATE TABLE BENEFIT( BENVAL VARCHAR2(255 BYTE))
insert into BENEFIT values ('Included - 365 days/50%/50% '); insert into BENEFIT values ('Included - 120 days/50%/50% '); insert into BENEFIT values ('Included - 365 days/75%/50% ');
I would like the following output.
BENVAL Days FIRSTPER SECONDPER Included - 365 days/50%/50% 365 50 50 Included - 120 days/50%/50% 120 50 50 Included - 365 days/75%/50% 365 75 50 The days column must be set in the chain before days, the firstper column must be set between Prime ' / ' and the second ' / ', the secondper must be set after the last ' / '.
Currently, I created a table to store the distinct values in a table and by referencing tables in my select query. Instead, I wanted to know if I can create a SQL statement.
Thanks in advance.
Hello
Perhaps the easiest way is:
SELECT benval
, REGEXP_SUBSTR (benval, '\d+', 1, 1) AS days - or TO_NUMBER (REGEXP_SUBSTR...
, REGEXP_SUBSTR (benval, '\d+', 1, 2) AS firstper - or TO_NUMBER (REGEXP_SUBSTR...
, REGEXP_SUBSTR (benval, '\d+', 1, 3) AS secondper - or TO_NUMBER (REGEXP_SUBSTR...
BENEFITS
;
Guess what
- all 3 numbers are present,
- the days always appear first (as they do in the sample data),
- If there are other numbers in the chain, these additional staff come after percentages, and
- 3 numbers you want are unsigned integers.
If any of these assumptions are false, then you can always use REGEXP_REPLACE, but things get a little more complicated.
REGEXP_SUBSTR returns a VARCHAR2. If you want a NUMBER, call the string passed by REGEXP_SUBSTR TO_NUMBER.
-
I have this data
Rahul's...
I could display display this help operator q. How can I view this without using the operator of q.Hello
Rahul_India wrote:
Yes thank you
I just read it.
But how oracle server processes the SQL when we useselect 'rahul''s is smart' from dual;
When he sees a single quotation mark (not preceded Q), he realizes that you are using a string literal. He analyzes the text from left to right and launched a string of construction. If he sees one character other than a single quote, it adds to the chain. If he sees a single quotation mark, it looks like the next character. If this character is a single quote, she adds an apostrophe to the string and continues to analyze after the 2nd single quote. If the single quotation mark is followed by something other than an another single quote, as the end of the literal.
In your example, it looks at the first 5 characters after the quotation mark single opening (r, a, h, you and l) one at a time. We see that they are not single-wupotes, so it adds them to the chain.
When it comes to the 6th character, we see that it is a single quotation mark, so that it looks like the 7th character. Also, a single qutoe, so will add 1 single quotation mark in the string.
He keeps glancing at the 8th through 17 characters that you typed (, space, i, s, space, s, m, a, r and t) one at a time, sees that they are not single quotes and adds them to the chain.
When it comes to the 18th character, it looks like the next character after the beginning of the literal. In your example, it's a space: a space is not a single aupote, so full at this time the string.Published by: Frank Kulash, October 14, 2012 14:05
Maybe you are looking for
-
I can't get 11.4 Beta installed correctly and has repeatedly asked to update
I have Firefox 11. Several times that I was asked to update to 11.4 and I have this but every time I find myself with a Firefox window on desktop indicating 2 elements, zero KB available and record dmg.I dragged icon in the record demand and the reco
-
I've updated to Firefox for Mac 3.6.23. I have OS 10.4.11. Immediately, I noticed that the address window has been reduced to about half an inch. The search engine is long, like the address used to be window. It's not good for me. I usually use the a
-
Tecra M5 won't boot to the top with 4 GB of RAM
Hi all I'm new on this and have a problem. I read that the Tecra M5 laptop can support 4 GB of RAM. I did a scan on crucial.com and which confirms what I had read, so I bought 2x2gb DDR2 PC2-5300 modules DIMM. I tried an and he worked with 1 GB in se
-
Windows media player will not play
I can't get windows media player to work if I first go to Accessories and open as administrator command prompt and type regsvr32 jscript and vbscript to regsvr32. After that, it works fine. But it's annoying to always have to do that. The OS is Vista
-
I noticed a folder in my e-mail named cats @C @ that I didn't create.
About a week there, I went to move an email to a folder and I noticed on the menu drop-down tab to move a folder named @C @ cats, I do not have create this folder and it does not appear in my folder list on the left side of my screen, I do not know w