masking-> part of the image is not

Similar Questions

• How to make a zoom in on part of the image using editing?

  Recently returned to the opening.  Do not remember how to enlarge the part of the image using editing.  If the answer is Loupe tool, please remind me how it works.

  What version of Aperture do you use?

  To zoom the viewer enter the combination of keys command - + (⌘ +) or press the zoom-viewer:

  

  If you prefer the magnifying glass, launching it from the view menu with "view Magnifier, where also find magnifying glass options to switch to a centered Loupe or show the grid under the microscope.

  

• Qosmio F30 - 112L where wonder which part of the image?

  Hello

  I want to help.
  Recently I installed Windows 7 on my Qosmio F30-112, which has WinXP.
  I have backed up my files before installing windows.7 unfortunately, I have only my files instead of programs.

  So my problem is now where I can get a few programs that is important for me as a CREATOR & WIN DVD MOVIE FACTORY DISC? Please can someone help me?

  Thank you

  Hello

  These applications and software were part of the image of Toshiba and are not downloadable.
  You can use it if you install the original image of Toshiba on the Toshiba laptop.

  Welcome them

• IMAQ Vision: The image is not big enough for the operation (Imaq WriteToPNG.vi)

  Hi all

  I was stuck for a few days trying to get my work VI and get this error. It is as simple as to save a graph of intensity as an IMG, he works with JPEG formats but my graph is U16 grayscale and it is not supported by the jpeg format so I didn't get the expected results. Then I went to the PNG format and the error "the image is not big enough for that operation" appeared. I tried to resize as aid error NOR suggest, and got the same error, anyone has an idea on what could be the problem?

  Hello Bob,

  Thanks for the tips, I'll post my code in future issues (since I already solved this one). As you say, there was something wrong with my code, the code in the image actually worked well, but doesn't have the part where I wrote to the variable (the variable was not being written if its value is an array of 0x0, not big enough actually). Thank you!

• Down on the Image, but not on the mouse scroll bar event?

  Hi all

  I use an event "Mouse Down" on an image to save the coordinates X and Y of the click and increment a counter.  My problem is that I'm looking at an image with a scroll bar that I want to use to set what part of the image is visible.  When I click on the scroll bar, I set off the mouse event down and increments the counter, which I won't do.

  Is there a way to implement a mouse event to the bottom so that it will ignore clicks on the image scroll bars?  If not, can you think of another way to accomplish what I'm doing?

  Thank you!

  Some quick ideas:

  The scroll bars will be a fixed height or width of the right or at the bottom of the indicator. In the mouse to the bottom of the event handler, if the click happens to a set of coordinates that are in a region of scroll bar, you know, do not increment the counter.

  OR

  Maybe you can overlay a transparent image control such that it covers the image but not the scroll bars, and find clicks on this second control.

  Mike...

• File recorded incorrectly and parts of the image are missing

  I was working in Photoshop CC and saved that I made changes.  I have added teeth, skull, the eyes and recorded.  No problems.  I added the background and not registered, no problem.  I added the flame and saved... photo is destroyed.  When I clicked saved it changed the image and now the bottom is that partially, the flames have missing parts, the dog has missing pieces and my picture once done for a class assignment is destroyed.  If there is a solution, please help me.  Otherwise I'll have to go back and redo everything.  Which waste far too much time because I have 3 other assignments to do and who does not understand to make posts on the site of the student and watching the video tutorials for other assignments.

  Here is the version incorrectly saved as a png image of the image that it was recorded so wrong what he was:

  

  Help, please!

  Julie S.

  Please see file saved incorrectly and that some parts of the image are missing

  (Double Post)

• Part of the Image disappears

  I have a file Illustrator CS6 (64-bit version 16.0.3) I placed in InDesign CS6 (version 8.0.2) and exported in PDF format. The PDF file appears in Acrobat X Pro (version 10.1.13). It prints well drive XI (version 11.0.10). But the consultation on screen through reader, an element of one of the two images (not the whole image) on the page is still missing. The part that is not displayed is a rectangle filled with 1% Cyan and yellow 24%. The red line around him appears, but the fill appears white (not transparent). Other elements of the image are not displayed. I also converted the file in InDesign to PDF through the print dialog box and fill it does not appear. I also exported to PDF (round trip) directly from Illustrator, and it does the same thing. I tried to CMYK and RGB. It's always the same thing. I tried to create a new Illustrator file separated only a rectangle filled with the color and export to PDF. It's always the same thing with other colors. I tried to do with a black fill. Sometimes black is not displayed. Sometimes, it does. I tried red. Sometimes red does not appear. Sometimes, it does. This proves that it is not settings, like it has all been in the same file without changing any settings. I tried to update the drive. No update is available. I repaired the first installation of drive and rebooted my computer. This part of the image still does not show in the drive. Help, please.

  I think that I thought about it. It was my player settings. Preferences > accessibility settings > Document colors Options > replace Document colors has been verified. I had the background color set to white and will change the fill color of the shape. I think that is not allowed to change the fill color of closed forms, because they are not the background of the actual page. In addition, he showed to chance that another color fills that I created for testing purposes. And stroke and underlined text that has been converted to forms have not been affected at all.

• Fluidity in the mode of the image is not visible in the magnification of 100% and above.

  Fluidity in the mode of the image is not visible in the magnification of 100% and above.
  It is perfect between 25% and 66%. If I disable hardware acceleration, it works but slow. Does not work with the PSD, jpeg, 8 or 16-bit. I have reset the PS. He had worked in the morning and stopped work hours despite nothing happened: I have no install or remove any software. My PS is clean, I do not use any add-on or 3rd party filter.

  
  All tips are appreciated.

  Thank you
  Gabor

  2009 end iMac i7 16 GB of ram, ATI Radeon HD 4850, OSX 10.8.3

  https://www.dropbox.com/sh/zy5gqaj0nrpr2yz/ZxgT4DBKQx

  A Mac video card with 512 MB of vram is marginal. A 256 MB card enable GPU mode to liquefy to work at all, even on the small images. The smaller image work about only works in CPU mode, make a smaller selection just the part of the image you want to distort and then start fluidity in CPU mode using the down option. It will be slow but should work. Get a stronger video card (more vram) would be the best solution.

• I need to replace a color on my image with a specific part of the image color.  How do I?

  I spent over 2 hours trying to figure out how to replace a color on a part of my image with a specific color indicated on another part of the image.  So far, I was able to go to "Replace color" on my version of Adobe Photoshop, but it seems that I can only change the hue and brightness of the color that it is currently.  I need to use a specific color, so this didn't help me.  Does anyone know how to complete the task that I refer to?

  In addition, please keep in mind that I use Adobe Photoshop 6.0, not a fancy cs version or whatever it is.  So it's fairly old school...

  Any help/comments are greatly appreciated!  Thank you.

  Hello

  In fact, you can choose a specific color using the replace color function!

  Go to Image > adjustments >, replace color

  

  Select the color you want to replace. Then, click on the 'Result' box in the section of replacement (see below)

  

  A color picker dialog box opens, where you can use the eyedropper tool to select a specific color in your image, or you can enter the specific RGB/CMYK values.

  

  Please post again if you have any other questions - I use CS6, but as far as I know, this process works the same for PS 6.0.

  Good luck!

• InDesign display only part of the image

  I do work for a client in InDesign CS5. I haven't worked in before CS5, so don't know if this is a bug or if I'm doing something wrong.

  It seems to happen randomly and I checked the preferences and tried using different settings for display performance. I even tried the work of viewing with preview of overprinting on.

  Where to place the images that a part of the image shows. When I convert them to PDF or print the file, and then displays the entire image. This makes it very difficult to make the layouts, especially in cases where I need to crop an image.

  In InDesign, it looks like this:

  

  When I convert them to PDF format (it is a low resolution output, just to demonstrate my point) the entire picture shows:

  

  In InDesign, it looks like this:

  

  When I convert them to PDF:

  

  The machine I'm ding this work on is an iMac, 2.66 GHz Intel Core 2 Duo with 4 GB 800 MHZ DDR2 SDRAM. It runs Mac OS x 10.6.4. And InDesign version 7.0.2.

  This is definitely not normal and not a bug, but something on your system or configuration. If Eugene'ssuggestion does not work, try http://forums.adobe.com/thread/526990

• I added an image as a signature that works very well if a new message an email, however, the signature of the image is not added when I reply to an e-mail message?

  I added an image as a signature when a set my e-mail account. This image is added successfully when I compose a new email. When I reply to an e-mail message, the image is not added, and I have to manually copy it from a newly formed email. I assumed that there should be a way around this?

  Account settings of GOTO and look under the section Composition & addressing. There are two check boxes to include signatures in the responses and transfers.

• I get emails with pictures and when I send them to others. they open them but the images are not displayed. The photos are there when I send them. Thank you

  I get emails with pictures and when I send them to others. they open
  their place but the images are not displayed. The photos are there when I send a
  them. Thank you

  Make sure that your security software (antivirus) is not blocking attachments.

• Hello apple.toi have 1 iphone 4S issues to buy it in a store minh.toi your old phone, then reinstall it requires icloud mem.va part of the cu.toi not know who owns the nay.toi wish apple unlock his laptop for my toi.imei my *.

  Hello apple.toi have 1 iphone 4S issues to buy it in a store minh.toi your old phone, then reinstall it requires icloud mem.va part of the cu.toi not know who owns the nay.toi wish apple unlock his laptop for my toi.imei my * .gmail: ***@gmail.com

  This is a user to user forum. To disable locking activation iCloud the owner of the iCloud account should turn off. There is no way around it. Find my iPhone Activation Lock - Apple Support  If you are unable to contact the owner or that they will not remove the lock try to get your money as soon as the phone cannot be used. -AJ

• When sending an Email containing pictures, I get the Message "one or more of the images could not be sent" in Windows Live Mail.

  When sending an Email containing pictures, I get the Message "one or more of the images could not be transmitted. When I send this message to my address, I see the little red X in place of the image. How can I fix it?

  original title: Live Mail

  Hi donabell,.

  Thanks for posting your question in the Microsoft answers Site Feedback forum. Your question it will be better answered by the experts in the Windows Live Solution Center. Please repost your question here.

• I try to print full photo of the body, but need to fit the image horizontally, not vertically. I turn picture or turn paper into the printer?

  Newbie needs help!

  I try to print the photo of full body, but need to fit the image horizontally, not vertically.  I turn picture or turn paper into the printer?

  What version of Windows are you using?

  You can try to open the picture in paint and adjust the print settings and change the orientation from there.