IMAQ Vision: The image is not big enough for the operation (Imaq WriteToPNG.vi)

Similar Questions

• Try to install the OS but not big enough partition?

  Hello

  I'm a little lost... After you have reinstalled XP, I had a few problems.
  First of all, the program that I now have on my computer is supposed to have not passed the real thing on opening... I lost the disc, so I bought another XP (SP2) drive on eBay and I tried to install... It then says that as I have already a newer version (SP3) and therefore does not install.
  I thought I would just try to install windows 7 instead and forget XP but now I said, by the system, the partition is not big enough!
  My C drive seems to just have a BIG something or other and is great just 13 MB... the partition of F is NFTC and has more space it seems... can someone please tell me how I can expand the C partition, so I can install?
  Or do I just delete/clean everything and start over with an installation of windows 7?
  I'm really lost here and any help is welcome.
  Thank you.

  Before you start to wipe the drive clean, check first with the computer is capable of running Windows 7

  Run Upgrade Advisor for Windows 7

• Windows Media Player 11, DVD video, not big enough in fullscreen

  During playback of movies DVD with WMP 11 and in full screen, the video does not stretch to the edge of the screen.

  I have a flat screen monitor set to 1600 x 900. When I entered the mode full screen the video becomes a bit larger, but does not fill the edges of the screen. In other players such as InterWinDVD player or video Media Player Classic DVD of the CCCP play full screen completely to the edges of the screen (except for two black borders on the top and bottom do wide screen of culture).

  However in WMP 11 200% is not big enough. I was wondering if it is possible to get the video to play 300 or 400% in size?

  Here's what I mean:
  http://img44.imageshack.us/i/wmp11problems.jpg/

  Notice how the video area (Pink) is not stretched to fit the vertical edges of the screen.

  I really like WMP 11 due to SRS wow effects. Unfortunately, since the upgrade to a monitor flat screen with a resolution of 1600 x 900 WMP 11 the fact that the culture of the video. Other players I use InterWin DVD or the Media Player Classic CCCP do that mean the culture of the video. I am running Windows XP with SP3.

  Hey Helldiver.

  Check if you have the plug-ins installed to support the features of DVDs on your Media Player. Windows Media Player is a complete DVD player when combined with a DVD decoder (MPEG-2 decoder) with features such as full-screen video playback controls, ads chapter DVD and integrated pouch.

  If you are running Windows Vista Home Premium or Windows Vista Ultimate, DVD capabilities are included as part of the operating system. If you are running Windows Vista Home Basic, Windows Vista business, or Windows Vista Enterprise, you can enhance your DVD playback experience by purchasing a pack of decoder DVD or upgrade to a more powerful version of Windows Vista.

  Here is a link to the list of plugins that you can install to get the features of full fledge for you DVD:

  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Try to install these plug-ins and see if you can get the service your DVD playback fullscreen

  Thank you

  Kind regards
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• entry not long enough for the date format value

  Hi all
  my table PF having IN_DATE is number format we save date number format as 20120101 (Jan 01, 2012)
  and IN_DATE can have 0 (zeros) also.
  
  When running under query, I get error "not long enough for the format of the value entry date.
  Please, help me to sort it, why this error is coming?
  
  Thanks in advance
  

  SELECT * FROM pf WHERE 
  TO_DATE(IN_DATE,'YYYYMMDD') > TRUNC(SYSDATE)-100
  and IN_DATE  != 0;

  Published by: user10736825 on May 20, 2013 15:30

  Hello

  When you store date information in a column NUMBER (or string), you just ask in trouble. The best way to avoid this problem is to use a DATE for date information column.

  The next best thing is to avoid the conversion of the NUMBER into a DATE. DATEs (such as returned by SYSDATE) still can b converted without risking a mistake, so instead of

  user10736825 wrote:

  SELECT * FROM pf WHERE
  TO_DATE(IN_DATE,'YYYYMMDD') > TRUNC(SYSDATE)-100
  and IN_DATE  != 0;
  

  use:

  SELECT  *
  FROM      pf
  WHERE      in_date  > TO_NUMBER ( TO_CHAR ( TRUNC (SYSDATE) - 100
                                       , 'YYYYMMDD'
                             )
                      )
  ;
  

• The CPU is not powerful enough for Oracle database 11g?

  The CPU is not powerful enough for Oracle database 11g?
  
  I installed the datatase Oracle 11 g on my host by using the default configuration of oracle yesterday. Today, I find some the alert message: "CPU usage is 86,79%, through attention (80) or critical (95) threshold.» The average value of the CPU usage is 80.85% and I have to wait for more than 10 seconds for opening a page of the EM.
  My host is HP workstation xw4200. CPU is 3.4 GHz. No other applications on that host.
  I want to know: what is the main reason for the shortage of CPU resources? Because the database Oracle 11g itself is exhausting CPU or because there are a few configuration issues?

  qkc wrote:
  1 is it true that most of the CPU is exhausted by the EM control tool?

  It's quite possible.

  It is also one of the reasons why we encourage people to drop EM Database Console and switch to EM Grid Control. The burden is then on another server.

  2. why this index has been added in advance by Oracle Corporation? It does not seem that each tool is set up perfectly in advance.

  It was probably not required under ideal conditions, in which it has been designed and tested.

  Why is your environment not identical to the designed conditions that use Oracle? ;-)

• SQL error: ORA-01840: value not long enough for the format of the date of entry

  It is a delete SQL in a driver of demand, which gives no error, but does remove all the lines either. I have converted the removal 'from' to ' Select * ' and may see the following error:
  
  Select * FROM PS_GPDE_DV_TRIG40 WHERE EXISTS (SELECT FROM 'X'
  PS_GPDE_DV_ELIG_MO ELG WHERE ELG. EMPLID = PS_GPDE_DV_TRIG40. EMPLID AND
  ELG. EMPL_RCD = PS_GPDE_DV_TRIG40. EMPL_RCD AND TO_DATE (TO_CHAR (ELG. PRD_END_DT
  "YYYY"). TO_CHAR (ELG. PRD_END_DT, "MM"). '01', "YYYY-MM-DD") =.
  PS_GPDE_DV_TRIG40. GPDE_DV_EVT_EFFDT AND ELG. CAL_RUN_ID = "CAL_0812")
  Error report:
  SQL error: ORA-01840: value not long enough for the format of the date of entry
  
  
  The interesting thing is that if I attach a condition of emplid, then the SQL above does not give an error and return lines:
  
  Select * FROM PS_GPDE_DV_TRIG40 WHERE EXISTS (SELECT FROM 'X'
  PS_GPDE_DV_ELIG_MO ELG WHERE ELG. EMPLID = PS_GPDE_DV_TRIG40. EMPLID AND
  ELG. EMPL_RCD = PS_GPDE_DV_TRIG40. EMPL_RCD AND TO_DATE (TO_CHAR (ELG. PRD_END_DT
  "YYYY"). TO_CHAR (ELG. PRD_END_DT, "MM"). '01', "YYYY-MM-DD") =.
  PS_GPDE_DV_TRIG40. GPDE_DV_EVT_EFFDT AND ELG. CAL_RUN_ID = "FM_CG_0812")
  and emplid = "1234"
  
  now, if the number of lines is identified (by giving more number of emplids), it begins to give the error when the number of rows returned is greater than about 30. It is completely independent of what employee is used, so there is no question of data dependence.
  
  Function optimizer cost is off and a subquery nest is off on the init.ora file
  
  subquery UNNEST= false
  
  optimizercost_based_transformation = off
  
  
  I don't know if it has something to do with this problem.
  
  Explanations would be welcome!
  
  Thank you
  Vikas

  I think it is question of data combined with a not very sensible date format mask (it could fail when the null data, because of your concatenation with '01' and work when not null data).
  Have you tried with a simple TRUNC?

  Your code:

  ...TO_DATE(TO_CHAR(ELG.PRD_END_DT, 'YYYY') || TO_CHAR(ELG.PRD_END_DT , 'MM') || '01' , 'YYYY-MM-DD') =PS_GPDE_DV_TRIG40.GPDE_DV_EVT_EFFDT...
  

  After change:

  ...TRUNC(ELG.PRD_END_DT , 'MM') =PS_GPDE_DV_TRIG40.GPDE_DV_EVT_EFFDT...
  

  Nicolas.

• With the new update my screen is not wide enough for the format. How can I change this?

  After the new update, the display shows only 3/4 of what is presented. I reduced the size of the print and that did not help. For example, typing this, once I had as "present" the due screen move to the left to allow me to see what I was typing. It does this automatically. I don't know what caused it in the latest edition of the update, but he made me a certain number of problems by acting on the Bank of line because no moveable windows do not show enough to allow me to hit the submit button.

  I want to see the whole window when I log onto a site. When I open now Yahoo News, for example, I don't see the last of three inches. I can see them if I hover over the page, but until now, I always saw the entire page when it comes to the top without having to take any action on my part.

  Where can I or how can I do to get it to how she still worked before?

  I opened the learning system and it refers to a tool of Mozilla bar which I did not either. Don't know if it of relevant or not.

  Hello

  Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution. There are several ways to solve this problem. See the Web pages are broad and fuzzy after update of Firefox - how to fix article for a suggestion. Here is another possible solution:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.

• I try to install FF on a thin client and need to change the location as the installler extracted temporary files so that the disk is not big enough.

  Is there an extracted version of Installer pre or a way of specifying where the installer extracted itself to?

  You can 'extract' the Windows of Firefox 4 versions + yourself by opening the package Firefox Setup #. 0.exe with 7-Zip and extract the contents of the \code\ folder in a new program files that you have created in advance.

  This way of "installation" of Firefox is not write to the registry, then you will not be able to set it as default browser, WIndows can't "feel".

• The memory resources available in the pool of resources of the parent are not enough for this operation

  Hello

  I tried to light a Nexus 1000V VM running on a 5.1 ESXi on a 5.5 vSphere vCenter and I get an error message about the available memory resources. I'm running on a virtual server with 10 GB of RAM and 60 GB HARD drive. The physical host machine has 16 GB of RAM and 320 HARD drive. I am a beginner in this so please try to be clear. Thank you very much.

  Hello

  It is possible to have a reserve of memory on the 1000v (I think that the model comes with them as standard when you deploy).

  If you right-click the virtual machine and 'Settings' and then go to the tab "resources", under the heading 'Memory', you have whatever it is the value of the booking?

  It would look like this: http://i.imgur.com/ftBZENv.png

  If she has a reservation, you could safley assign 0MB (removes the reservation). This could be preventing it from power.

  Otherwise, you run a cluster in vCenter? You have active HA?

• Monthly image allotment not auto - added manually for the last 6 months.

  Since the implementation of our team account Adobe Stock in August 2015, we have never had our monthly allocation added automatically. Each month, a call must be placed to the Helpdesk to fix the problem - every time the person says: the problem is is back, but he is never punished. The only thing that anyone is able to do is manually add the 20 images we are due for 2 licenses and it generally takes several calls on our behalf before that happens. I will start the appeals process still today because our images of December have not yet appear. Do not hesitate to check our interminable case #216948687.

  Hello

  We are aware that the use of the image is not automatically renew for some customers.  It is being investigated and we hope that it be fixed in the coming weeks.

  I asked our support team to check your allocation and follow-up with you.

  Sorry for the inconvenience caused.

  Kind regards

  Bev

• Background desktop images is not full screen

  Original title: pozadie pracovnej plochy

  When I give the image of wallpaper of my images,
  wallpaper appears

  not all photo (which I stored in my pictures), but only the section part of the whole picture.

  It seems bigger then a screen?
  Why?

  Thank you for any response

  Hi Zlatko,

  ·         What is the desktop resolution?

  ·         Are all the photos in the same resolution?

  You may experience this problem if the position of the image is not defined correctly for. wallpaper Follow these steps and check if that helps:

  Step 1: Change the position of the background image of the image of the desktop:

  (a) on the start screen, press or click on desktop.

  (b) press on and hold or right click on an open space on the desktop and then tap or click Customize.

  (c) click on wallpaper, under the Position of the image changes the fill or fix and check parameters

   

  Step 2: Check the resolution of your screen. To do this:

  (a) right click on the desktop, and then click screen resolution and your resolution will be written by virtue of the resolution. He notes down.

  (b) now, right click on your image and click on modify. It will open the painting. There is option resize select it and then clear the check box maintain proportions and pixels-click and type your resolution width then height, and then click ok and then save your picture again with a different name.

  (c) close everything and go back on the desktop and select again your navigation screen background image newly save image. Everything will be fine now.

  For reference, see this link:

  Change your background, colors, lock screen and photo account

  http://Windows.Microsoft.com/en-in/Windows-8/change-backgrounds-pictures

  Work in the familiar office

  http://Windows.Microsoft.com/en-us/Windows-8/desktop

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• cover image will not appear

  the cover image will not be displayed for one of my projects, I tried to put into service and it still does not appear publicly. It will show that I am connected, if the "E3 2014: Mortal Kombat X Preview with Steve Beran" video at the bottom of my profile.

  Behance

  Also where staff monitors this forum we leave him a message on if isn't working for me the submit button is grayed out even though I filled everything, safari OS X 10.11.1 901

  
  

  Thank you!

  Hello - you marked this project as containing "Adult Content", which means that it is placed behind the adult wall and not visible to registered-out users, or users under 18. If you have any questions about this, contact Behance support team: on.be.net/GetHelp.

  Also - I do not know which box "leave a message" you are referring to-you can send a screenshot? Thank you!

• Image does not appear in all browsers

  On the homepage, just below of the "available soon dethrone" now has a command button. It seems that with Safari. I tried Firefox, Chrome and IE, and the image does not appear on one of these. The thing that annoys me is that the image was there before and worked fine, I didn't make it bigger and link, so I'm confused why all of a sudden it is not displayed.

  Thanks in advance for any help.

  http://turtlecell.com

  Post edited by: hcblue

  I suspect that your image is not properly optimized for the web.  Open in Photoshop & press on file > save for Web.

  In Panel of DW of files, the PUT option (up arrow) is used to upload files to your server.

  Nancy >

• I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  local disk, I think he was trying to save it in the templates folder.  I changed it to save it on my counter top and it worked.  Rookie mistake.  This had to be the problem.

  Thank you

• Why my selected image will not appear on the chassis of the big money develop?

  Why my selected image will not appear on the chassis of the big money develop? It appears on the left side, but I see only a blue box with an X in the middle of the big Frame in the Center?

  Go to your Lightroom preferences, performance tab, uncheck the box use the graphics processor.