MASTS safe delete folder after you run FixIt

Similar Questions

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Same fixed.  At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.

• Mailboxes are not visible in mail after you run the OS El Capitan 10.11.5 upgrade.

  Mailboxes are not visible in mail after you run the OS El Capitan 10.11.5 upgrade.  The boxes are there (somewhere), and I can save the messages in them.  I can just see them or call back messages on my macbook air.  Structure of messaging and mailbox is intact on my iPad and iPhone, and all messages are recoverable.  Any help to restore the messages on my Mac would be greatly appreciated.

  The mailbox list is divided into categories with such topics on my Mac. When you position the cursor on one of these positions (with the exception of the mailboxes), you should see the Word display / hide it on the right. Please, click on show, if that's what you see.

  In the category of the mailboxes, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small tip of arrow. If the arrow points to the right, click it so that it points downwards.

  Also note that you may need to scroll the list of mailboxes upwards or downwards to see it all.

• Disk space free (compress old files) does not change after you run Disk Cleanup.

  Original title: win. XP disk cleanup

  Win. XP: Free Disk Space (compress old files) does not change after you run Disk Cleanup.  Confused.

  Thank you. VC

  Compress your files, your computer will slow down a lot. I recommend that you don't try this.

• Composite shape disappears after you run Calc

  After running a calc from a context menu in a composite form of planning, only 1 of the components of the form is displayed after you run the Calc. I then have to navigate to the composite shape. Anyone know what might cause this behavior?

  Thank you

  FA

  I found a solution where if I run the calc in a new window he returned to the composite shape. It is interesting that the other composite shapes do not have this problem.

• After you run antispyware scan in safe mode, programs will not open.

  (Knowing I shouldn't), I opened a folder zipped Internet and received a Trojan horse. I immediately started the computer (windows XP Home Edition) in safe mode and ignored the warnings on the scan in safe mode. After analyzing the computer would start, but the screen is all black. I restarted and did it again. I tried once more and this menu came (one when you press F8) and I clicked on start as the last work settings or anything. I ran the program again antispyware and there removed yet more 'virus '. Now none of my programs will open: a "Open with" menu appears with a list of programs for some and for others such as the Control Panel options give me an error message saying C:\WINDOWS\system32\rundll32.exe Application not found.

  I'm 18 years old and have no idea how to go even to solve this

  Hey this is KieConfused answer to my own problem. After all a straight 24 hours of constant fiddling done everything I read on without success, I finally understand how to restore the ability to open my programs (applications). I read all the different means like the system restore and guests of order and same EXE by typing in the Control Panel folder options, but none of this has worked. However, I found this site http://www.dougknox.com/xp/file_assoc.htm. He has a list of all the file associations you might need. I'm 18 years old and figured this out me so I believe that most amateurs could do. Since I had problems with applications (.exe) I chose the difficulty of EXE file Association and just opened and he ran and after executed selection and then run again in the next menu (I could have done more but that is pretty much it; just keep clicking on program run or anything like that) and INSTANTLY without having to restart my computer everything worked :) I STRONGLY SUGGEST TRYING THIS FIRST BECAUSE I TRIED EVERYTHING, I READ HERE THAT I COULD FIND AND IT WAS VERY COMPLICATED, AND NONE OF IT HAS WORKED, EXCEPT THIS. Please enjoy the satisfaction of finally being free, and LEARN THE LESSON: DO NOT OPEN what this EITHER AS ZIPPES FILES ON THE INTERNET unless YOU ARE 10000000000% sure THAT it IS SAFE. :)

• After you run the XP Disk Defragmenter, system crashes or runs very slowly

  When I run Disk Defragmenter after its finished to start my computer hangs up and slow real execution.

  Also, some installed start programs acting weird. like taking a lot of time to load up or when I use them that they cling

  or stop responding all together.

  To work the way they are supposed to do, I have to uninstall and then reinstall. Why is this happening?

  I thought that the operation of Disk Defragmenter only deleted of fragmented files that are no longer in use, or not is more necessary.

  So nobody knows what is happening here?

  Thank you.

  Kittycast of Kittyville http://justin.tv/marksr

  I agree with Gerry Cornel, this stemmed not Disk Defragmenter.

  There is nothing wrong with the Disk Defragmenter - it works well for what it was intended: temporary, occasional use. If anything, it gets abused and forced to do jobs he was supposed to never do, like defragmentation huge disks that get heavy use and therefore are strongly defragmented, etc..

  Here is a routine that I've compiled over the years to troubleshoot issues with Disk Defragmenter that proved very useful if you want to continue with this problem:

  There are several reasons why the built-in Defragmenter may not work correctly:

  0. it is malware on the system. Solution: Run an anti-virus control and also a spyware check.

  1. the disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  2. the disc is damaged and must be repaired. Solution:

  a. open "My computer" and right-click on the drive that you want to disable frag.
  b. Select 'Properties' and click on 'tools '.
  c. Select "Check now" to check the drive for errors.
  d. Select the two options and click on 'start '.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  3. Disk Defragmenter can be altered, needing a system restore to fix it. Solution:

  a. start - all programs - Accessories - System Tools - System Restore (click here to open);
  b. Select a good restore point before you start having problems with Disk Defragmenter.
  c. start the restore process and let an end (descriptive name of something restore operation as "Repair Defrag").

  4. There are other programs that run the Defragmenter interruption integrated. Solution:
  a. close all running programs.
  b. If you think there may be some programs that run in the background.
  c. press Ctrl + Alt + Delete and
  d. Select "start Task Manager".
  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  5. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).

  6. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with her and stalking interference may not be easy. Note: Some versions of Windows 7 disables the ability to run the Defragmenter built-in in safe mode. If disabled, it will say when you try to start it in safe mode.

  7 Disk Defragmenter may no longer be on the system or is damaged while it needs a re - install. Solution: Reinstall the built-in function.

  There are several ways to re - install the built-in Defragmenter:

  A:
  a. open the menu 'start '.
  b. type '% Windir%\Inf' in the 'Search' box and press 'Enter '.
  c. in the window that opens, find the file named "dfrg.inf.
  d. right-click on "dfrg.inf" and "install".

  B:
  a. go into "start > run" on your computer.
  b. Type "rundll32.exe setupapi, InstallHinfSection DefaultInstall 132% windir%\inf\dfrg.inf" and press "Enter."
  3. click 'OK' to make the program automatically reinstall itself.

  C:
  a. go to start > all programs > Accessories > right click on command prompt > select 'run as administrator '.
  b. at the command prompt, type "regsvr32 dfrgsnap.dll" and press "enter."
  c. type 'regsvr32 dfrgui.dll' and press 'Enter '. This will reinstall the missing Defragmenter files.

  8. most of the problems will be solved by #6 above, but if not, and if your windows installation is otherwise working well, you should consider to download a free trial of a Defrag tool commercial rather than drastic measures to restore the functionality built-s. Third-party programs are more robust and many work in the background, so you can use your PC during defragmentation.

  Most third party programs offer a free, fully functional trial (better ones are for 30 days). Install one of them allows you to disable built-in and if you decide to uninstall, removal will replace the built-in function, repaired several times in the process: it's worth a try...

  Here's a recent Top 10 comments side-by-side comparison of the best available defragmentation programs:

  http://Disk-Defragmenter-software-review.TopTenReviews.com/

  The gold medal is the only defrag program that also prevents the fragmentation (see comment).

  Why is it good to prevent fragmentation?

  Basically, it significantly increases life expectancy of your hard drive (especially since you don't have to leave the system on all night - a much 'greener' agricultural practice), not to mention it also increases the performance of the system.

  Find out what the review has to say on this.

  Good luck to you!

  Bill R TechSpec

  PS: If still no go, repair may involve editing the registry or repair installation of windows and possibly re - install windows itself. These aren't simple solutions. If so, indicate if they can be provided.

• Response delay after you run the patch_weblogic.sh script

  Hello
  I installed the 9.1.0.1 version of Oracle Identity Manager and did all the steps for the upgrade to version 9.1.0.2, when you run the patch_weblogic.sh script, takes too much time and I have no answer to be built successfully. It is necessary to implement this script.
  I use Oracle Weblogic Server 10.3.5
  
  Thank you

  This is where memory questions come into it. According to your previous message in which issues of memory during installation, you may have them again. I suggest that you stop your application server. Then in the /xellerate/OIMApplications directory, delete the 2 folders that represent the ear files. IOM startup and it will give an error on the deployment. Then run the script of your patch. In the folder/xellerate/ logs, there is a file patch_weblogic.log that you can tail to monitor the progress. It will give you the output of the patch and then there is also the log of the server itself in the /servers/ /logs and there is a .out file I think that will give you any other information. Just watch and see what file's modification timestamp and tail that one it is too.

  -Kevin

• White/black screen after you run check disk error in Windows Vista.

  I ran a check of the disk error on my lenovo W700ds (Windows Vista) yesterday evening. When I logged into the machine the screen became black and white. I was able to start the Task Manager, and he showed no application running and less than a dozen processes running in the background (which is unusual). I was able to login using safe mode but may not know how to get rid of white screen black and restore anything that could have been smeared in the disc.

  Thank you

  Hello

  Method 1
  I suggest you boot the computer last known good configuration and check if the problem persists.

  Using the last good known Configuration
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2
  As you're able to boot in safe mode, I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

• Old version persists after you run the Setup program

  I downloaded the installer of flash (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and installed it successfully, but when I checked the version of the plugin on my browser (firefox-> tools-> addons-> tab plugin) it still shows the old version "Shockwave Flash 10.0.45.2".  I also visited this page http://www.adobe.com/software/flash/about/ and it also show my version as 10.0.45.2.  Restart of firefox makes no difference.

  I've already doubled checked that the version of the installer is 10.1.53.64.  Could someone help me please?  Thank you very much.

  I'm using firefox 3.6.3, Vista.

  Http://kb2.adobe.com/cps/141/tn_14157.html uninstaller to remove all versions of Flash Player.

  Download the 10.1.53.64 http://www.adobe.com/products/flashplayer/fp_distribution3.html Installer

  Make sure that none of the browsers are running when you run the installer & uninstaller.

• After you run a Microsoft FixIt, everything on the screen became very low.

  Microsoft fix it messed up display - I have a monitor CRT - how to fix?

  Please help - the microsoft fix it reset my display settings.  At first, I didn't click that I got the CRT monitor then it sets the parameters as if I did not.  I can't see the screen like this.  It is too small.  Help!

  Hello

  Microsoft Fix it have you trying to run?

  Method 1:

  I suggest you to return the item and try to set the resolution of the screen and check if it helps:

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  See also:

  Common tasks

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_ct.mspx?mfr=true

  Method 2:

  See the article and check if that helps:

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

• After you run the fix it scan, get the message 'Windows Firewall may not be set as the default firewall service.

  I received the following message in the fix it running scan.  What should I do?

  "Windows Firewall cannot be set as the default firewall service. This may be because another firewall service is installed or because the Windows Firewall is disabled. »

  Hello

  · What fix it scan are you referring?

  · You have a third-party security software installed on the computer?

  · Who is the service pack installed?

  Run the troubleshooting utility from the link below and check if it helps: diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/en-us?entrypoint=lightbox

• 64-bit Windows vista hangs after you run the update

  Hello

  Last night I ran the update of windows on my 64 bit vista laptop, he said there are 2 updates important (I don't remember what they were) and 1 optional (for security essentials).  I chose to install them all, let run updates, restarted the computer when he was asked and then pinned the problem.  Windows starts up nicely, all my startup apps pop up like normal (things like security basics, steam, etc.) and, if I don't touch it, it looks fine.  Sometimes I can get as opening firefox, sometimes just moving my mouse t - it, but the computer just hangs.  I can still move my mouse (sometimes it turns in a circle, as the computer working on something) but I can't click on anything whatsoever, cannot Ctrl + alt + delete... my only way of l ' down made a difficult start.

  I tried to use the tool of the previous version to roll back to before the update, the Wizard works well and said completing, but I still have the same question.  If I'm in safe mode or safe mode with networking, it works fine. I even tried to delete pending.xml to see if it was an update stuck but who did not (cmd said that there was no pending.xml found to remove)

  Anyone know what this might be or how to fix it?  I'm fresh out of ideas

  Hello
   
  Given that everything works well in safe mode which makes them a third-party application causes the computer to freeze.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  Here are the steps to do:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.
  Reset the computer to start as usual
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.
   
  For more information, refer to the article below.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A300 - cannot logon Windows after you run anti-virus software

  Hello

  I need URGENT help with my A300.
  I have AVG as my anti virus. I ran some scans earlier, and showed a number of threats that heals the VA and clean infections.

  Then, I thought to run it again just to make sure - then 2nd scan. I left do this while I went about my normal activities.
  Some time later, I went back to it. He had put into hibernation. I went from the power button and then loaded up as usual.

  FYI, I have a user account that gives full administrator rights must be able to access as usual.
  After clicking on it, it starts to load for subject a second and then straight away, says saving settings, end the session.

  It continues to be. I tried to log on in safe MODE. The same thing happens. It will not go beyond this point.

  Help, please!

  Memory/University thesis, I have my sister here! I don't know when it was backed up last! :(

  Thank you

  Hi cheekymonkey1882,
  seems that your system is infected with a root kit...

  get a linux live cd or a victory on cd and save important files!
  You must not start from the cd, so no code hard drive will be loaded!

  After saving the files (make sure that you can read!, usb device or other)
  restore the system to factory settings...

  You can try to disinfect the hard drive with the live cd too...
  but remember: If a file is infected it will remove the scanner.

  Good luck!