match model text file

Similar Questions

• saved the file doesn % 27T match original text

  With the help of LV 2010.  I have a request I encrypt a file and save it on the hard disk in a text file.  The problem I have is that the string of characters that I write in the file does not match the string of characters that are read from the file.  Files correspond to the first 10 characters, then in the original string, there is a \r character who fell from the file.  The rest of the file is not too well after that.  In addition, the size of the strings also differ by a few thousand characters.  Is there some settings in the file read or write that could be the cause?  Thank you.

  Right-click of your read/write functions of text file and uncheck the box "Convert EOL".  Or use the binary read/write functions.

• Compare 2 text files data and output match

  Hi all

  I need some advice.

  First of all, in BinaryCode.txt data are thus:

  Replace BinaryCode0 1 0 0 0 0 0 0 0 0
  Replace 1 0 0 0 0 0 0 0 1 BinaryCode0
  Replace 1 1 1 0 1 1 1 1 1 BinaryCode1
  Replace BinaryCode1 1 0 0 0 0 0 0 0 0

  the first line of the text file is the header. So I need to check if the names in the second column (BinaryCode0 or BinaryCode1) appear in the Timed_Sets.txt file.

  Timed_Sets.txt data as such:

  BinaryCode0, 6, 40...
  BinaryCode0, 7: 40...
  BCName1, 0, 20...

  BCName1, 1, 20...

  For example, as BinaryCode0 is a match that I pulled out the line whole Timed_Set.txt in another table.

  I worked on a program, but I do not get the expected results.

  Text files and VI are attached.

  I appreciate your kind assistance in this matter.

  Thank you

  Concerning

  Kart

  If I understand what the output should be so what you essentially have to do is walk through the column for each unique value and BinaryCode.txt, pull the corresponding lines of Timed_Sets.txt. There are a variety of ways to do this, depending on the amount of data you have and whether or not you can use any kind of prior knowledge as to the actual content of the file (for example names of key search). It's a joint way. Modify if needed.

• How to insert text in the middle of the file data model text in specific places?

  Hi all

  I need to add (text) data to specific model of existing text file locations and then rename the newly written file.

  This is a more compact and more efficient way to do it. You can optionally replace the recursive section of path with the file entry list VI. (the file IO - palette of functions of advanced files, take a look at the help file, you can search for a model in the name of the file and returns an array of the file found paths).

  Ben64

  

• Deploy multiple virtual machines from one model to the help of customization of the OS and a text file for hostname and IP

  Hi all

  Not sure if this has already been answered, I did a search on the forums, but couldn't find an answer to what I'm looking for.

  I want to fully automate the deployment of multiple VMs of a model using a customization file, but also to retrieve the host names and IP addresses from a text file / spreadsheet.

  for example:

  I need to deploy a test environment of 30 virtual machines using the template file and customizing TestVM. I have a spreadsheet with the VM host names and IP addresses. The process now is to manually enter the host name and IP when the customization file invites to do while deploying them in each virtual machine. The customization file takes care of the rest (license key, admin password, add to the domain etc.) can I automate entry of the name of host and IP addresses in reading from a text file?

  Thanks in advance!

  Take a look on the deployment, customization and modification of virtual machines to a csv file

  There are many more examples of this community on the same subject,

• How read text file and decode

  Hi, I have a file which consists of 2 columns, it is first of all time/date stamp and 2nd is ON / OFF text.

  I would like to determine the time when the text is ON or OFF.

  I am not able to analyze the data in separate columns 2 and then read, can someone help me on this?

  The example of the file is attached.

  I was going to throw away the solution, but bob and cruz are probably right, that he is HW.

  What is the problem with your vi above, is that you are matching the model from the OFF, but you don't have a table, so your search through your entire text file and on the OFF first display you text in front of her. You must first create a picture of your spreadsheet from the read text file string. This can be done either by using a string of worksheet function array or as cruz said the spreadsheet file. Im not sure of your desired end result, but from there you can feed in a for loop and find each item ON or OFF.

  That should help you get started.

• AppleScript - extraire extract values from a table, create a text file with these values

  Hello world

  Lets say I have a table that looks a bit like this

  

  And this table I would create 2 text files (or even more, depending on how many switchnames are there) who look a bit like these

  

  

  Is it still possible?

  I suppose to create a Service (which can be called in numbers) with Automator which includes an Applescript script - but - no idea since the script is not one of my strong suits.

  There is not need to be perfect, because tables are not necessarily the model presented above - so to tweek the script to the application will be necessary. The text files can be created/saved in the same folder as the file numbers is in.

  Y at - it script-genius out there?

  See you soon

  Florian

  Select the column of fist of the data, and then run this script by copying the Forum and paste it into the script editor.  The files will appear on the desktop

  say application "Numbers".

  say front document to tell the worksheet active

  say ( class is worn) fromfirst table whose selection range

  selectionRange defined in column 1 of the selection

  set cnt to 0

  the value destRange for range

  the value currentList to {}

  -the list of switches

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  if and ((cnt > 0) (switch is not missing value) and (currentList is not contain switch)) then

  switch and the value in the currentList currentList

  end if

  NTC put to the cnt + 1

  end Repeat

  -Display dialog box "to the list of items is:" & currentList & "a list" & (currentList County) ".

  Repeat with aswitch in currentList

  " game textOut to '# Script generated with Applescript for switch' & aswitch &"

  # on "& (today's date) &"

  !

  conf t

  "

  set cnt to 0

  Repeat with acellule in selectionRange cells

  -say acellule to set the value on the NTC

  pass the value to the value of cell

  -Display dialog "aswitch is []" & aswitch & "] and switch is []" & switch & "]".

  if (aswitch contains the switch) then

  the value cellCol to address a column of first cell of acellule

  address of line of first cell value cellRow in of acellule

  value to the aport (value of the cell of the column (cellCol + 1) cellRow) integer

  the value vlan for the (value of the cell cellRow of column (cellCol + 2)) integer

  the value desc to the (value of the cell cellRow of column (cellCol + 3))

  " put to textOut textOut &.

  !

  "" IG 1/0 interface / "& aport &.

  switchport mode access

  switchport access vlan "" & vlan & ""

  Description LINK TO "" & desc & ""

  "

  on the other

  -Display dialog box "did not: []" & aswitch & "] and []" & switch & "]".

  end if

  NTC put to the cnt + 1

  end Repeat

  Set myFile to open for access (path to the Office as text) & aswitch & '_output.txt' the with write permission

  textOut write to myFile

  MyFile close access

  end Repeat

  end say

  end say

  end say

• How to save the contents of the RichTextBox to text file

  Hello

  Do I NEED to SAVE THE content of RichTextBox in text file?

  If it IS a question of LabVIEW, here is an example of how load a rich text file (to help you if you don't know how to get a rich text in LabVIEW).

  If you have a rich text box, you can use the "SaveFile" invoke method to match the function that you have linked to.

  

• Unable to save the template as a text file or .png file

  Saving files BTC

  I develop a sociogram. I downloaded a www.phenotyping.com model. It is said that I can save this as a PNG file or a text file. When I try to save as a text file, enter the file name, but it will not register as what anyone else 'All files '. I don't know how to save it as a text file or a PNG file. I need to be able to save it and submit my instructor so that she can she rank. But if I win and I can't reopen his case, how my instructor will be able to open it?

  I develop a sociogram. I downloaded a www.phenotyping.com model. It is said that I can save this as a PNG file or a text file. When I try to save as a text file, enter the file name, but it will not register as what anyone else 'All files '. I don't know how to save it as a text file or a PNG file. I need to be able to save it and submit my instructor so that she can she rank. But if I win and I can't reopen his case, how my instructor will be able to open it?

  ========================================
  You're almost there... try the following steps...

  Your work on the screen left click the "Snapshot"...

  The screen 'save data such as' will launch and you can enter
  a backup location and a file name for your project.

  Left click on the Save"" button.

  (OK... This is the step that you missed)

  After having left clicked the button 'save'... your pointer turns into a
  Cross + if you click left or made to drag a rectangle around the area you
  want to save... When you release the mouse, the graph button
  will be saved in .png format.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How can I place an indd - just the text file?

  Hello.

  This is a snippet of my code.

  var tfiImport = File("C:/Users/Me/Documents/YS/Exported Stories/YS_full_pg.indd");
          tfYS[0].insertionPoints.item(-1).place(tfiImport);
  
  

  I'm trying to import an indd file in a pre-existing text block. The framework becomes excess, because the indd file is placed in actual size.

  The indd is a text file with different styles applied. I just want retrieve this text with styles and place it in my text, auto to flow if necessary.

  How can I do?

  Any help would be appreciated.

  Hi SK,

  you would open the InDesign document and duplicate the text at your insertion point.

  Both documents are open.

  The insertion point where you want to "place" the formatted text is selected.

  There is at least a block of text with a paragraph in the document where you want to duplicate.

  Example:

  var targetDocument = app.documents[0]; // The active document
  var sourceDocument = app.documents[1];
  
  var targetInsertionPoint = app.selection[0].insertionPoints[0];
  
  sourceDocument.textFrames[0].paragraphs[0].duplicate(LocationOptions.AFTER,targetInsertionPoint);
  

  Example:

  To duplicate the whole text of a story where you know a block of text of this story:

  sourceDocument.textFrames[0].parentStory.texts[0].duplicate(LocationOptions.AFTER,targetInsertionPoint);
  

  Search for the text in the documentation for DOM object and its methods.

  Adobe InDesign CS6 (8,0) object model JS: text

  Also app.open () method:

  Adobe InDesign CS6 (8,0) object model JS: Application

  Uwe

• Add text to an existing text file without replacing

  I create a text file that you match this information from a user interface. My hope is that I can add information as buttons are clicked. But when I write in that text file which is already there.

  myFile.writeln("\r\n",mySFolder,"   ",myCountText.text, );
  
  

  I wonder how to add to the text file.

  Here is an example...

  var Log =File(Folder.desktop +"/LogFile.txt");
  Log.open('w'); //open a new document
  Log.writeln("This is a log file");
  Log.close();
  Log.open('e'); //open for append
  Log.seek(0,2); //seek to end of file
  Log.writeln("Write text to re-opened file");
  Log.close();
  

• Load the text file cannot display some letters such as w and?

  I downloaded a flash template that includes a text file used to load the content. I opened the text file and began to make changes to certain texts, so when I discovered the changes I noticed that some letters and characters are not displayed as the letter w and the question mark? and other letetrs.

  I am a newbie to all of this, please help

  Here is an example of the text that I have included in the text file:

  & privacy_title1 = privacy policy
  & privacy_txt1 = what information do we collect?

  We collect information from you when you register on our site, place an order or fill out a form.

  When ordering or registering on our site, if applicable, you may need to enter your: name, e-mail address, phone number or mailing address. You can, however, visit our site anonymously.

  And here is what he sees when I run the flash model:

  

  As you can see the w is missing and the point mark and a few other letters.

  Yes, I have an answer to this problem

  (1) select your text layer

  2) go to your properties panel > character

  (3) change the anti-aliasing to "use the device font.

  This should solve your problem

• AS 3.0 external loading a text file text

  OK, so things have changed a lot. In AS 2.0, I could create a text or HTML file with variables and dynamic text fields to display the text of the loadVariablesNum argument. AS 3.0 uses a totally different model. How can I just grab the text from an external document and display in a dynamic text field?

  Never mind. I got it!!! The ampersand at the beginning is a BIG no-no! Don't do it! It returns an error of e/s on the text file.

  Thank you all.

• Mapping of the 2 text files with conditions

  Hello
  
  Just trying to get my head around what would be the best solution that could be implemented in ODI with the next task I.
  
  I have 2 text files, that the first file is in the format
  
  AccCode | ChildCodeStart | ChildCodeFinish
  1000-1099 B1000
  1100-1199 B1001
  
  The second text file
  ChildCode | Alias
  1000 depenses1
  1001 depenses2
  1100 available1
  1101 disponibles2
  
  The logic is now that I want to AccCode the first map file and match all the codes in the file two which are between ChildCodeStart and ChildCodeFinish
  
  So my output
  
  AccCode | ChildCode | Alias
  B1000 1000 depenses1
  B1000 1001 depenses2
  B1001 1100 available1
  B1001 1101 disponibles2
  
  I don't know what would be the best route for this in ODI, I should load the files in the tables first or can make directly via an interface?
  
  Thanks for any help
  
  John

  Hello

  Yes, it is necessary to use a package... Sorry I forgot to mention. The package defines the 'stream of action '.

  Good to hear it works...

  Cezar Santos

• AppleScript to delete a text file

  Hi, here is a job Applescript that lists the contents of a folder and its subfolders to a text file named 'file inventory. The problem, for example, is that if a subfolder is emptied of files, the list of his previous content is always indicated in the text of the inventory of the last time file that the script is run. So, I would delete all of the text in the file until it is written again. I searched and found this code and put my name of file in there, but I can't make it work.

  Any help will be appreciated.

  expressions of folklore ": folder files inventory.txt" value 0

  property file_id: null

  
  

                tell application "Finder" for the value this_folder for folder 'movies' from disk 'files '.

  the value log_file_path to ": folder files Inventory.txt.

  file_id value to open access file log_file_path with write permission

  Try

  write ('Start' & (current date) & back) to file_id

  my do_subfolders (this_folder, "")

  write (back & return) to file_id

  file_id of close access

  say "finished".

  we error error message

  file_id of close access

  errMsg say

                end try

  on do_subfolders (this_folder, name_prefix)

  say application 'Finder '.

  Journal name_prefix & string (name of this_folder)

  write (back & name_prefix & (name of this_folder) chain ) to file_id

  the value File_List for each file in this_folder

  Repeat with this_file in File_List

  Journal name_prefix & "" & string (name of this_file)

  write (back & name_prefix & "" & (name of this_file) chain ) to file_id

  end Repeat

  the value folder_list for each folder in this_folder

  Repeat with this_subfolder in folder_list

  my do_subfolders (this_subfolder, "" & name_prefix)

  end Repeat

  end say

  end do_subfolders

  You are on the right track, but set the folklore expressions takes the file reference that you have already opened, not the path text.

  so, since you open the file via:

  file_id value to open access file log_file_path with write permission

  the appropriate solution would be:

  file_id of the folklore of the value to 0