Similar Questions

• 5.5 ESXi update 2 | Hosts disconnect and reconnect to randomly

  We have 3 HP DL380 x G9 5.5 u2 running ESXi servers.

  They have been in production for about 6-8 months until now without any problem whatsoever, until recently.

  Recently, Vcentre guests will enter a 'disconnected' State and the alarm 'host and connectivity power '. After a few minutes, the host will reconnect and everything continues as usual. This disconnection causes no VMs sign out or restart. During the period where Vcentre shows as disconnected host, we can still SSH and ping on the ESX host without problem.

  I checked through the VPXD logs and found that, at the time of the failure, in this case:

  2015-08-22T01:45:52.952+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vpxapi.VpxaService.fetchQuickStats)
  2015-08-22T01:45:52.952+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vpxapi.VpxaService.fetchQuickStats)
  2015-08-22T01:45:52.952+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.172, vpxapi.VpxaService.fetchQuickStats)
  2015-08-22T01:46:52.953+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vpxapi.VpxaService.fetchQuickStats)
  2015-08-22T01:46:52.953+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vpxapi.VpxaService.fetchQuickStats)
  2015-08-22T01:46:52.953+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.172, vpxapi.VpxaService.fetchQuickStats)
  2015-08-22T01:47:05.413+08:00 [09892 info 'commonvpxLro' opID=E83DF74C-00001BE1-18] [VpxLRO] -- BEGIN task-internal-35516 --  -- vmodl.query.PropertyCollector.cancelWaitForUpdates -- 4cb606ef-f3da-9ace-e253-d4c9e9b48bfe(529b4a61-85a4-90fe-ce8c-6361ed144841)
  2015-08-22T01:47:05.414+08:00 [09028 error 'SoapAdapter.HTTPService'] Failed to read request; stream: <io_obj p:0x000000000cc5fd08, h:4656, <TCP '[::1]:8085'>, <TCP '[::1]:56470'>>, error: class Vmacore::SystemException(An established connection was aborted by the software in your host machine)
  2015-08-22T01:47:05.414+08:00 [09892 info 'commonvpxLro' opID=E83DF74C-00001BE1-18] [VpxLRO] -- FINISH task-internal-35516 --  -- vmodl.query.PropertyCollector.cancelWaitForUpdates -- 
  2015-08-22T01:47:52.954+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.172, vpxapi.VpxaService.fetchQuickStats)
  2015-08-22T01:47:52.954+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vpxapi.VpxaService.fetchQuickStats)
  2015-08-22T01:47:52.954+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vpxapi.VpxaService.fetchQuickStats)
  2015-08-22T01:48:07.047+08:00 [09916 info 'commonvpxLro' opID=24b2ad7b] [VpxLRO] -- BEGIN task-internal-35517 --  -- vim.LicenseAssignmentManager.queryAssignedLicenses -- ffe39310-e804-b7d6-92d8-61203ec022ce(52008866-be52-bc37-8007-48ec7a383c04)
  2015-08-22T01:48:07.047+08:00 [09916 info 'commonvpxLro' opID=24b2ad7b] [VpxLRO] -- FINISH task-internal-35517 --  -- vim.LicenseAssignmentManager.queryAssignedLicenses -- 
  2015-08-22T01:48:25.450+08:00 [16416 error 'vpxdvpxdVmomi'] [VpxdClientAdapter] Got vmacore exception: Operation timed out
  2015-08-22T01:48:25.450+08:00 [16416 error 'vpxdvpxdVmomi'] [VpxdClientAdapter] Backtrace:
  --> backtrace[00] rip 000000018018b7fa 
  --> backtrace[01] rip 0000000180104c78 
  --> backtrace[02] rip 0000000180105f6e 
  --> backtrace[03] rip 000000018008ff08 
  --> backtrace[04] rip 00000001800418d6 
  --> backtrace[05] rip 00000001800445de 
  --> backtrace[06] rip 0000000180048382 
  --> backtrace[07] rip 00000000004f0ca9 
  --> backtrace[08] rip 00000000004f1399 
  --> backtrace[09] rip 00007ff7689280df 
  --> backtrace[10] rip 00007ff76892f418 
  --> backtrace[11] rip 00007ff768931b9a 
  --> backtrace[12] rip 00007ff768928257 
  --> backtrace[13] rip 00007ff768930d89 
  --> backtrace[14] rip 000000000046157e 
  --> backtrace[15] rip 000000000055a15a 
  --> backtrace[16] rip 00007ff7682b379d 
  --> backtrace[17] rip 00007ff7682b4406 
  --> backtrace[18] rip 0000000180152544 
  --> backtrace[19] rip 00000001801525d1 
  --> backtrace[20] rip 0000000180156eec 
  --> backtrace[21] rip 00000001801587ba 
  --> backtrace[22] rip 0000000180158cfc 
  --> backtrace[23] rip 0000000180158e98 
  --> backtrace[24] rip 0000000180153ab3 
  --> backtrace[25] rip 0000000180154b03 
  --> backtrace[26] rip 0000000180154e43 
  --> backtrace[27] rip 000000018019d62a 
  --> backtrace[28] rip 0000000067642fdf 
  --> backtrace[29] rip 0000000067643080 
  --> backtrace[30] rip 00007ffdbd7e13d2 
  --> backtrace[31] rip 00007ffdbfab5444 
  --> 
  2015-08-22T01:48:25.454+08:00 [21316 info 'vpxdvpxdVmomi' opID=HB-host-42@141303-7d8115aa] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vmodl.query.PropertyCollector.Filter.destroy)
  2015-08-22T01:48:25.454+08:00 [21316 warning 'VpxProfiler' opID=HB-host-42@141303-7d8115aa] [VpxdHostSync] GetChanges host:192.168.101.171 (192.168.101.171) [GetChangesTime] took 1800035 ms
  2015-08-22T01:48:25.454+08:00 [21316 warning 'VpxProfiler' opID=HB-host-42@141303-7d8115aa] [VpxdHostSync] DoHostSync:0000000009D0F6C0 [DoHostSyncTime] took 1800035 ms
  2015-08-22T01:48:25.454+08:00 [21316 warning 'vpxdvpxdInvtHostCnx' opID=HB-host-42@141303-7d8115aa] [VpxdInvtHostSyncHostLRO] DoHostSync failed for host host-42
  2015-08-22T01:48:25.454+08:00 [21316 warning 'vpxdvpxdInvtHostCnx' opID=HB-host-42@141303-7d8115aa] [VpxdInvtHostSyncHostLRO] Host sync failed to host-42
  2015-08-22T01:48:25.454+08:00 [21316 error 'vpxdvpxdInvtHostCnx' opID=HB-host-42@141303-7d8115aa] [VpxdInvtHostSyncHostLRO] FixNotRespondingHost failed for host host-42, marking host as notResponding
  2015-08-22T01:48:25.501+08:00 [21316 warning 'vpxdvpxdMoHost' opID=HB-host-42@141303-7d8115aa] [HostMo] host connection state changed to [NO_RESPONSE] for host-42
  2015-08-22T01:48:25.524+08:00 [21316 warning 'VpxProfiler' opID=HB-host-42@141303-7d8115aa] InvtHostSyncLRO::StartWork [HostSyncTime] took 1800105 ms
  2015-08-22T01:48:25.524+08:00 [21316 warning 'VpxProfiler' opID=HB-host-42@141303-7d8115aa] VpxLro::LroMain [TotalTime] took 1800105 ms
  2015-08-22T01:48:25.524+08:00 [21316 info 'commonvpxLro' opID=HB-host-42@141303-7d8115aa] [VpxLRO] -- FINISH task-internal-35432 -- host-42 -- VpxdInvtHostSyncHostLRO.Synchronize -- 
  2015-08-22T01:48:25.869+08:00 [09292 info 'vpxdvpxdHostUpgrader' opID=SWI-10381aa1] [VpxdHostUpgrader] Preinstalled bundle found: not installing
  2015-08-22T01:48:25.869+08:00 [09292 info 'vpxdvpxdInvtHostCnx' opID=SWI-10381aa1] [VpxdIntHost] Missed 180 heartbeats for host 192.168.101.171
  2015-08-22T01:48:25.869+08:00 [09832 info 'commonvpxLro' opID=HB-host-42@141316-52709f38] [VpxLRO] -- BEGIN task-internal-35518 -- host-42 -- VpxdInvtHostSyncHostLRO.Synchronize -- 
  2015-08-22T01:48:25.870+08:00 [09832 info 'vpxdvpxdInvtHostCnx' opID=HB-host-42@141316-52709f38] [VpxdHostSync] Synchronizing host: host-42 (192.168.101.171, 192.168.101.171)
  2015-08-22T01:48:25.899+08:00 [09832 info 'vpxdvpxdVmomi' opID=HB-host-42@141316-52709f38] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vpxapi.VpxaService.retrieveChanges)
  2015-08-22T01:48:25.901+08:00 [09832 info 'vpxdvpxdVmomi' opID=HB-host-42@141316-52709f38] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vmodl.query.PropertyCollector.createFilter)
  2015-08-22T01:48:25.902+08:00 [10564 info 'vpxdvpxdVmomi'] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vmodl.query.PropertyCollector.waitForUpdates)
  2015-08-22T01:48:26.402+08:00 [09876 info 'commonvpxLro' opID=task-internal-35519-3cef20c4] [VpxLRO] -- BEGIN task-internal-35519 --  -- ScheduledTaskLRO -- 
  2015-08-22T01:48:26.433+08:00 [17708 info 'commonvpxLro' opID=task-internal-35520-36662076] [VpxLRO] -- BEGIN task-internal-35520 --  -- ScheduledTaskLRO -- 
  2015-08-22T01:48:26.436+08:00 [17708 info 'commonvpxLro' opID=task-internal-35520-36662076] [VpxLRO] -- FINISH task-internal-35520 --  -- ScheduledTaskLRO -- 
  2015-08-22T01:48:31.420+08:00 [09876 info 'commonvpxLro' opID=task-internal-35519-3cef20c4] [VpxLRO] -- FINISH task-internal-35519 --  -- ScheduledTaskLRO -- 
  2015-08-22T01:48:32.009+08:00 [10092 info 'commonvpxLro' opID=HB-host-47@184250-7ea813a6] [VpxLRO] -- BEGIN task-internal-35521 -- host-47 -- VpxdInvtHostSyncHostLRO.Synchronize -- 
  2015-08-22T01:48:32.010+08:00 [10092 info 'vpxdvpxdInvtHostCnx' opID=HB-host-47@184250-7ea813a6] [VpxdHostSync] Synchronizing host: host-47 (192.168.101.173, 192.168.101.173)
  2015-08-22T01:48:32.014+08:00 [10092 info 'vpxdvpxdVmomi' opID=HB-host-47@184250-7ea813a6] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vpxapi.VpxaService.retrieveChanges)
  2015-08-22T01:48:32.016+08:00 [10092 info 'vpxdvpxdVmomi' opID=HB-host-47@184250-7ea813a6] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vmodl.query.PropertyCollector.createFilter)
  2015-08-22T01:48:32.040+08:00 [19544 info 'vpxdvpxdVmomi'] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vmodl.query.PropertyCollector.waitForUpdates)
  2015-08-22T01:48:32.077+08:00 [19544 info 'vpxdvpxdVmomi'] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vmodl.query.PropertyCollector.waitForUpdates)
  2015-08-22T01:48:32.080+08:00 [19544 info 'vpxdvpxdVmomi'] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vmodl.query.PropertyCollector.waitForUpdates)
  2015-08-22T01:48:32.083+08:00 [10092 info 'vpxdvpxdVmomi' opID=HB-host-47@184250-7ea813a6] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vmodl.query.PropertyCollector.Filter.destroy)
  2015-08-22T01:48:32.085+08:00 [10092 info 'vpxdvpxdVmomi' opID=HB-host-47@184250-7ea813a6] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vmodl.query.PropertyCollector.cancelWaitForUpdates)
  2015-08-22T01:48:32.085+08:00 [10092 info 'vpxdvpxdInvtHostCnx' opID=HB-host-47@184250-7ea813a6] [VpxdHostSync] Retrieved host update to 184250 for host-47
  2015-08-22T01:48:32.086+08:00 [10092 info 'vpxdvpxdInvtHostDb' opID=HB-host-47@184250-7ea813a6] [VpxdInvtHost::SaveFieldsToDb] IPMI info of host 192.168.101.173 is not set
  2015-08-22T01:48:32.091+08:00 [10092 info 'vpxdvpxdInvtHostCnx' opID=HB-host-47@184250-7ea813a6] [VpxdHostSync] Completed host synchronization for host-47
  

  It doesn't seem to be a single host that is affected, it could be anything. It does not appear to occur at the same time during the day.

  I have checked for problems known and found some handshake SSL timeout KB articles, but do not believe that the same thing is happening here. I tried increasing the time-out period by that article anyway (KB 2064246) but that does not make a difference.

  All devices are connected to one HP5406ZL2 pass, with management on a vswitch with 2 x 10 GbE interfaces Active / active with route based on the origin of virtual Port ID set.

  The server running vCentre is also the MRS server and our server backup exec.

  Any information anyone can provide would be greatly appreciated.

  This weekend a just disappeared from the servers disconnected completely and don't come not back online.

  To fix that we followed the info in this article:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2037798

  This has now been run on all hosts and disconnects the random disappeared. I will seek to apply the updates that are mentioned in this article as soon as POSSIBLE.

  Cordially for someone else who stumbles across this.

• After 4.1 update, 1 host 'Error while running script control of health' - what to check next?

  I had an ESXi 4 update 1 host, I used the Update Manager to upgrade to 4.1.  To join the cluster, I get a red mark and the host State

  "HA agent on contains an error: error when running script control of health."

  Two hosts in a separate cluster do not have the same question.

  So far, I have

  Reconfigured HA

  HA HA/Enabled disabled for the cluster

  Restart management agents

  Server restarts

  Put the server on another cluster

  .. .the all result in the same error.

  Any ideas?

  I am also trying to solve this problem, and although I have not found a solution, I started to create an article documenting what I found regarding this error. I think I'm very close to a solution.

  UPDATE: I found the solution! Read the article below:

  (Solved) VMware HA fails after upgrade to ESXi 4.1

  http://www.paulscomputerservice.com/articles/article.php?id=183

• vCenter 4.1/ESXi 4.1 material status "Communication error with the server.

  I am slot that a brand new installation of vCenter with two new installs of ESXi 4.1 connected on it. I use on Dell PowerEdge 2950 s ESXi servers. I tired the customized version of Dell and vmware ESXi vanilla version. My host vCenter is Windows 2008 R2.

  In vCenter, the two server ESXi, any version of ESXi, I run, I get "Communication error with the server" error when I click the tab hardware state. No data appears in the hardware status tab.

  Only suggestion of Dell has been updated with firmware/BIOS on the server level. I did and it did not help.

  Anyone has any suggestions or ideas what would cause this?

  I had exactly the same problem what is to have everyone on this thread.  I finally called VMware support.  It is certainly a problem with Tomcat.  Apparently, during my initial installation of tomcat server vCenter (on a Win2k8R2 vanilla Server / unreleased) na not create a database file.  The vCenter Server uninstalled eventuall tech and went through the Setup again.  For some reason any Tomcat created db it's good the second time.  After installation, it takes about 5 minutes for the db should be created.

  On Windows 2k8R2 it is located here: C:\Program Files\VMware\Infrastructure\tomcat\lib\xhiveConfig\data

  The name of the comic is VcCache-by default-0. XhiveDatabase.DB

  My server didn't have one at all.  The relocation has created, at the beginning it is 0KB in size.  After 5 minutes, it grows up to 25, 600KB.

  Everything in my vCenter works now correctly.  I'm on 4.1.320137

  I hope this helps.

  Dave

• 5.5 - ESXi Update 2 vs ESXi 5.5 Rollup 2 Driver

  stupid question Yes day.

  So 5.5 ESXi update 2 is just the updates for Vmware and no driver updates, same base drivers who were in 5.5?

  And 5.5 cumulative 2 driver is the Vmware updates + all new drivers that have been released since 5.5 was released?

  The image of the cumulative hotfix driver includes additional drivers and is supported only for new installations, i.e. not upgrade the host. For details take a look at the Readme document that is available in the download section.

  André

• ESXi Update 2 work with vCenter 5.1 5.1 update 1?

  We had some communication problems this past weekend, and our team Windows have not upgraded vCenter 5.1 update 1 to 2 of the update. While my team upgraded from some of our guests GA 5.1 ESXI Update 2 to fix some bugs. The hosts are still in maintenance mode.

  We heard vCenter must always be a newer version than the hosts. Yet, the VMware compatibility matrix says may manage ESXi 5.1 5.1 vCenter update 1 update 2.

  We use the DRS, HA and 1 FT vm. We distributed switch and switches Standard.

  We will have problems? Which statement is accurate. vCenter must always be a newer version or the matrix?

  Hi Rutager,

  You can manage the host with vCenter 5.1 U1 U2 5.1 ESXi no impact on Production or the DRS HA nothing. Please find the screenshot for your reference

  This shows vCenter version 5.1 U1 can support up to 5.1 U2 ESXi host.

  off experience only question we face is that the Update Manager will not be able to download patches beyond the U1 5.1 patches a few shots in accordance with baseline

  Note: 5.1 U1 and U2 each thing will be same agent FDM. no change in architecture HA

  For more interoperability

  http://PartnerWeb.VMware.com/comp_guide2/SIM/interop_matrix.php

  

• How do you update a host unique vm with Update Manager

  I have a single vmware esxi 4.1 host on a remote site and vcenter is a virtual machine, as well as 2 other virtual machines.  It is the target of SRM as well.

  In any case, I tried to address updates in the Update Manager and it expires just waiting to the power off vm.  There is no other host VM in this cluster is not as if something can vmotion off.  So I'm wondering because the Update Manager vcenter server running running on THIS host, if it were to close then maybe Update Manager could not perform?

  How can I update this host, currently on 4.1.0 260247.

  I have an another ESXi 4.0.0 171294 clocked at that site and it can also access the shared storage that can the 4.1 server.  I can't handle this in vCenter and vMotion things to him because I don't have a license to do.  But could I import vcenter to do this and it turns on and then try to restore the other host?

  Thanks for the help.

  patches are cumulative.

  you don't need a vma, its good for multiple hosts.

  just ssh into your box directly if you have only one box

• ESXi 4.1 host started crashing every day - including screen image

  Hello world

  I'm really at a loss here.  I have an ESXi 4.1 host (free version), who has 4 virtual machines on it. I haven't changed anything on this host recently but Friday it crashed and I had to do a hard reset.  It's the same thing again today.  I have no idea where to start to look at that.  The host hardware is two years. lt is running 6-drive SAS RAID, 24 GB memory and 2 Xeon quad-core processors.  What can I do to try to solve this problem?

  

  Since the Group:
  "The functionality Execute Disable No. run CPU not enabled for this machine.

  Please check the BIOS on your ESXi host hardware to see if this option is available (usuaully under CPU options, advanced settings or the warranty on some BIOS white box).  If that options is not available in your BIOS, please feel free to share the material model used (even if it is not on the HCL) as someone there may be able to help.

  An example of this error for the old version of ESXi (4.0) here:
  http://www.VM-help.com/esx40i/install_upgrade_issues.php

• vCenter Server is a virtual machine, how can I update the host

  I have 2 guests in our environment, I have updated the host of the 2nd, but may not know how to upgrade the 1 host because vcenter server runs as a virtual machine on it. This has me thinking that I don't have the installation program as best as possible.

  Basically, we have 2 Guest boxes and a small box of DC. I don't really want to run vcenter on the dc area. What would be the best soltuong for our environment? Can I keep vcenter as a virtual machine? If Yes, how can I update the host it will run on?

  Thanks in advance everyone... Chris

  I was afraid of that say you that

  Well in this case you may need to update the host manually (see for example http://communities.vmware.com/people/vmroyale/blog/2011/09/15/updating-esxi-5--single-use-esxcli-how-to) even with the need to manually update the host on which vCenter Server is running, I would always run as a virtual machine. There is usually not that many updates.

  André

  Post edited by: a.p..

• ESXi UPdate 3

  OK, here's my problem.  I have a PowerEdge SC440 running 1 GB of RAM (will be 4 GB in the future) with a Core 2 Duo.  My problem is when I try and install ESXi Update 3 from scratch, I get an error saying can't find the drive to install on.  However, when using ESXi Update 2.  It works perfectly.  What is the problem?

  VMware has switched the driver used with ICH7 controllers so Update 3 a drive connected ICH7 is considered an IDE drive.  You can either used a custom oem.tgz to correct file that or this http://www.vm-help.com/esx/esx3i/ESXi_install_to_IDE_drive/ESXi_install_to_IDE_drive.php.

• Multisim update fails to install with error.

  The regular update fails to install with error: an error occurred in the installation of an update.  If this error persists contact technical support OR.  It comes to Multisim.

  How can this be repaired?

  Thank you

  Multisim is different to the discussion forum... Please post there is http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/bd-p/370

  It will help you get a better answer...

  Best regards

  H S

• HTTP 503 error when you try to deploy the project in Visual Studio

  I get a http 503 error when you try to deploy a project in Visual Studio-SQL Server 2005. What this mean and how can I solve this problem?

  Hello

  I suggest you refer to the following msdn link for the fix for the problem.

  http://msdn.Microsoft.com/en-us/vstudio/aa718325

• Windows Update has encountered an unknown error. Code 80070026

  Windows Update has encountered an unknown error. 80070026 code that performs updates not be installed

  Although this page shows a different result code then what you see, please follow the steps on this page-
  Windows Update error 80070490

  Be sure to download the Version of (CheckSUR) system update readiness tool that matches both the edition of Windows installed and the architecture of the system.
  To see what is the architecture, open system in Control Panel.
  The architecture of the system appears under system, next to system type:

  When CheckSUR has finished download, set up the system before running the boot-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall and make sure that the native Windows Firewall is now on. The systemmust be connected to the internet when you run CheckSUR.

  Once you have restarted the clean boot state, run CheckSUR.
  Restart the boot state minimum same once it is finished and see if the system can search and detect updates necessary now.
  If possible, suggest that see you if the system can install the updates now.

  Cancel the Clean boot steps State now and restart the system once more.
  If this does not solve the problem of installation of update, then do a "upgrade on-site" aka Repair Installation, as described on the Windows Update 80070490 error page.

  Expert MowGreen Windows IT Pro - consumer safety

• When you install an automatic update. I received the error code 652. try three times. Always code error 652. She strives to update of Miscrosoft Silverlight (KB2164913) need help.

  When you install an automatic update. I received the error code 652. Have tried three times, always the error code 652. She tries to Miscrosoft Silverlight Update. need help

  Hello

  ·        Remember to make changes to the system?

  Follow the steps mentioned below.

  Step 1:

  There may be some third-party software that runs in the background, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Step 2:

  Reset windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Step 3:

  See the article mentioned below.

  Description of the update for Silverlight: September 1, 2010

  http://support.Microsoft.com/kb/2164913

  To get help after your query in the Microsoft Silverlight Forums. Click on the link below.

  http://forums.Silverlight.NET/forums/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows some updates not installed the 646 error code

  Windows some updates not installed the 646 error code

  See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/5300b50a-dfcd-42fb-9785-ab52f2ee1796 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft