Matching of the after shows to 9.3.4 update
After the update to the new iOS, I found that lost connection icon remains lit. My iphone shows the watch is connected and I receive occasional notifications from my phone to my watch. The Flash applications do not work.
Is this a problem with the new update?
Disconnections can be normal, when the watch loses the Bluetooth connection with the matched iPhone (for example, when updating iOS) and no known Wi - Fi network is available.
The devices should reconnect automatically a short while after become available and/or close being brought back. If they don't, keep your iPhone and close watch each other and follow these steps until they do:
- Check that Bluetooth and Wi - Fi are activated on your iPhone:
- It can help to turn Bluetooth on or off and turn it back on your iPhone (settings > Bluetooth).
- For optimal performance of your watch, during the General daily wear keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.
- Check that airplane Mode is not enabled on your watch:
- When you display the time on your watch, drag upward on the dial of the watch > drag left / right to the glance of parameters.
- If your watch is not connected and the airplane Mode is on, press the button to turn it off.
- Otherwise, it can help to activate / turn off the airplane Mode again.
- Restart both devices, both turn off together, and then restart your iPhone first.
If they still do not reconnect, try next disconnect and rematching your watch (choose restore backup if offered the choice):
- Cancel the twinning of your iPhone - Apple and Apple Watch Support
- Set up your Apple Watch - Apple Support
Tags: Apple Watch
Similar Questions
-
My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.
https://discussions.Apple.com/message/30014877#30014877http ://
Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.
-
The slide show feature does not work when I used my Macbook with new Apple TV 4th gen. The slide show stops after that display 7 photos and display to select the options for the slide show is displayed on the screen. The selected interval was 5 seconds. If the interval is spent in 3 seconds the slide show would work for a time and then to display random images. Has worked with Apple on this issue Support Mike and he managed to reproduce the problem. Since I'm in the return period of 14 days for this product, I returned it to the Apple store
Welcome to the Apple community.
After returning, I'm not really clear on what your question.
-
After I loaded Turbo Tax 2011, after that I connect to my PC, I get a blank screen with only the cursor showing. I picked up at an earlier date and reloaded the software TT 3 times with the same result. I tried of caraa start windows Explorer by using the Task Manager, but it does not work.
Hi AndyCantore,
Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
-
After showing the keyboard does not work protected void paint (Graphics graphics)
Hello
I am facing a big problem. Need your help.
I've implemented TouchEvent and VerticalFieldManager-> screen paint().
TouchEvent works well. But the paint method is confusing after the virtual keyboard is displayed.
My code is as follows:
public MyScreen extends MainScreen { private VerticalFieldManager vfm = null; public MyScreen() { super(MainScreen.NO_VERTICAL_SCROLL); vfm = new VerticalFieldManager(Manager.USE_ALL_HEIGHT | Manager.USE_ALL_WIDTH){ protected void paint(Graphics graphics) { //paint methods } }; } protected boolean touchEvent(TouchEvent event) { if(!event.isValid()) { return false; } if(//Check touch conditon) { //Do something return true; } else { return super.touchEvent(event); } }}
You can correct code above?
This method of paint does not work after showing the keyboard.
Thanks in advance.
Thanks for your reply. Guy.
I found my bug. This problem is related new instance in my code.
If the keyboard does not at the present time, it seems that the screen height is decreased by the height of the virtual keyboard. It must be calculated in your code.
-
Cannot install After Effect free trial, the page shows "that we are now some questions, please try again later." If the problem persists, contact customer support. "for several days.
Is this problem will soon be resolved? Thank you!
You MUST have a 64-bit computer and operating system... What is your computer?
-Programs are supposed TO not view or download if they are not installed on your computer
MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html
-
After installing lightroom cc, the photos show ok in library, but when the peak is selected and implemented development module, there is a blue screen with 2 diagonal lines white covering the picture. half of the photo will show when I put side by side feature on. How can I remove this blue screen.
Edit/Preferences/Performance and uncheck "use graphics processor.
-
I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?
A scanned document is an image; You can't find a picture.
If the image contains text, recognition of characters (OCR) will convert the 'text' in the image in real text (searchable, editable).
OCR can be performed automatically when converting a PDF to Word, using the ExportPDF service.
To run OCR inline in a PDF document, you will need Acrobat.
-
I try to use the facility in the way they show on the page here, but at the end of the process shows download failed!
Edit by G225: Switch to Windows.
You will find support for Adobe Flash Player in this forum: http://forums.adobe.com/community/webplayers/flash_player
-
EDIT: Rewritten for clarity
Driver Realtek ALC3861 Audio (worm) 6.0.1.7525, A00 for Windows 10, it is no longer a button labeled 'Show meters' under speakers/Headphones > Maxx Pro Audio in the lower right corner (see attached screenshot). This button in previous versions of the driver for Windows 7 opens a new window with sliders to balance the front speakers and rear in a surround Setup.
What I did:
Update my OS 7 to 10 and set to update drivers Realtek audio as a result - to the version mentioned above.
What I expected:
The button 'Show meters' would be present in the most recent driver Realtek.
What really happened:
After the upgrade to the latest driver, the 'Show meters' button is gone.
I reinstalled the latest driver several times and nothing helps and tried the driver from Windows 8.1 and by default with Realtek with worse affects (Audio Dell window missing most of the items/drop options, etc.)
If anyone would know how to solve the problem, if it is intentional, or that worsen it, I would appreciate it.
I think I should be more careful. In Control Panel > Sound > playback > select the Realtek device > properties > levels there are specific changes, I need. I don't know why I didn't notice until now. Could explain why there was no button 'Show meters"in this version, but I thought that Windows 7 has also had the same upgrade and there was audio Dell upgrade as well.
I'll still with a new soundcard from Creative, however, saw a $70 super nice which looks great and seems to have features to match.
-
I want to make a 1080i computer at half the resolution or third resolution in the SOUL to speed up rendering for previews times low resolution. I just got a glimpse of H264 low-resolution take 5 minutes to encode in AE and 28 minutes in the SOUL.
It's easy to do in After Effects rendering parameters. However, the option "video" in the SOUL seems to imply that is encoded at this resolution, not made at home.
I went into AE and changed the setting in the composition to "half" window, but when I queue it in the SOUL, the 'Source Match' button still shows 1080.
What is the right method to get the results I want?
I am currently using AE CC and CC SOUL on Windows.
Short answer: the feature you are looking for does not currently exist in the After effects-of-SOUL workflow.
When the SOUL is coding a mock-up of After Effects, it doesn't have the ability to affect the way in which the model of After Effects is rendered. The model will be always made its intrinsic properties. Even when you resize the encoding settings in the SOUL, the full model is made and scaling only during encoding.
Caution: SOUL CS6, we began work to enable this feature to exist. When you right-click on a computer in the queue of the SOUL and click the Source settings, you can control the rendering of After Effects settings: Guide layers are visible or not. Our intention is to extend this feature, although the addition of parameters affecting the properties of the model (as opposed to the visibility of the layers) is much more difficult and remains on our to-do list.
In addition, the composition Viewer settings do not affect the properties inherent in the model itself, it only affects the way in which the model is seen.
As you correctly deducted the differences between rendering and encoding, I expect you have also already considered workarounds to get what you want (a model made faster which is coded in the SOUL), but summarize these ideas even when:
(1) makes an intermediate file without loss of After Effects and which encodes your delivery with SOUL format, possibly using spyware files to automate the side of the SOUL of the process which is what I would recommend.
(2) nest your scale model in a model more small that corresponds to your desired settings and encode this model in the SOUL.
As always, please send us your thoughts on how you want to see the After effects-of-SOUL improved workflow: http://adobe.ly/feature_request
-
Restrictions does not not after ISO put 10.0.1 update with the new iPhone 7
Restrictions does not after ISO put 10.0.1 update with the new iPhone 7 any which option of ranking app I don't choose no changes are made. All the patches?
Thank you
Hello Launcher,
Thank you for bringing your question about Restrictions here in Apple Support communities. My understanding of your question is that you change the Restrictions, but no change is noticed. I tried the same on my iPhone 6 Plus running iOS 10 and noticed a similar situation. Please allow me the opportunity to explain how the Restrictions is designed to work. First, I put my limitations for applications, do not allow Apps and together 4 +, which basically means everything beyond 4 + will be blocked from buying. Then I went to the App Store and the first app that caught my attention was NCIS: hidden crimes. This app is rated 12 + and is definitely an application I would not want my toddler to help. It is that Restrictions come into play. When I type on NCIS: hidden Crimes, the Get option is grayed out. Restrictions does remove all apps, songs, books, etc. from view, but it will prevent the purchase, download, and install all applications rated above the setting you choose when you set up restrictions. It's the help article that discusses the Restrictions and prevent purchases: Use Restrictions in order to avoid buying on iPhone, iPad, or iPod touch.
I checked on the restrictions help articles, and I understand where it can be a bit confusing. In the help article Use Restrictions on iPhone, iPad and iPod touch, it says "You can use Restrictions, also known as parental control, to block or limit specific applications and features on your iPhone, iPad or iPod touch." This means in fact that apps, features or services (rated above that helped you, or if you have turned off completely) can he no longer appears on the device if the restriction is activated and starts blocking them. I also tested this by activating Restrictions and turned the cursor for Safari to off. When I went back to the home screen, Safari doesn't show any more and I could no longer use it.
I hope this helps to clarify how the Restrictions. If my understanding of the issue was not accurate to the issue that you are experiencing, I will be happy to pursue this issue with you. Please indicate exactly what you took measures, and what expectations you had or the some restrictions, applications, features, or services you are restricted. Thanks again and have a great rest of your day!
-
updates to iOS app show filled in the App Store but not apps actually updates
There's something strange happening very recently with the app on my iPhone and iPad updates. Two of them are on the latest version of iOS (9.3.2). Apps would show that they are updated in the App Store, but they are actually not updated. This is the second time that this has happened and I am writing this message I try to solve problems. The first time it happened I had to remove the app and reinstall it. I'm going...
- I opened the App Store.
- Press update of all.
- I saw the download of updates and the finish.
- Open the button is appeared next to the application in the list of updates.
The problem:
- Applications will not open by typing open the button next to them.
- I went to the home screen and the applications in question are darker color.
- I typed on these applications and they changed the "Loading"... "which means that they have not actually completed the setting to.
- The apps started to download it again.
- Applications is is stuck in download.
- I turned both devices power off, then turn it back on.
- On my iPad: apps started to redownload and completed. Applications are now open.
- On my iPhone: applications made "Waiting."... "then"Loading"... "and have not finished downloading.
I'll post this and continue to wait for applications to download. I don't want to remove them and reinstall because they are multiple applications I would you connect again and synchronizes again that I find annoying. I'll try to update this post after the completed download apps, if they end up actually or if I'll end up resettlement.
I posted this at 09:00. It is now 16:45, and only one of the applications is completely downloaded. It is not a problem with the internet, because I can stream movies very well. Another application that has been "updated" this morning went dark. I typed it and it has been "Waiting."... "for 10 minutes now.
-
9.1 Safari cannot open the page after el capitan 10.11.4 updated updated
have an imac (retina 5 k, 27 ", end of 2014)
4 GHz of processor intel core i7
8 GB 1600 Mhz DDR3
1 TB of flash storage
running Safari 9.1 (11601.5.17.1)
Safari opens but does not open the page - get - Safari cannot open the page - safari can't open the page because the server dropped the connection unexpectedly.
Journal of the console after repeated attempts-
appreciated all help to solve them.
Go step by step and test.
1. turn off the power to the router. Unplug it from the wall. Wait a while.
Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.
Restart the computer.
Boot mode safe.
https://support.Apple.com/kb/PH18760?locale=en_US
2 remove Caches.db
Close all windows and close all applications.
Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.
Select 'Library' in the menu dropdown.
Library > Caches > com.apple.Safari > Caches.db
Right-click on the Caches.db file and select "move to trash".
Close the windows.
Restart and restart Safari.
3 empty Caches
Safari > Preferences > advanced
Tick the box "Show develop menu in menu bar."
Develop menu will appear in the Safari menu bar.
Click on develop and select 'Empty cache' in the menu dropdown.
4. remove the Cookies
Safari > Preferences > privacy > Cookies and other data from the website:
Click on the button "Details".
Delete all cookies except those from Apple, your internet service provider and the banks.
5 Disable Extensions and test them.
Safari > Preferences > Extensions
Uncheck 'Enable the Extension' and test.
Enable the Extensions one by one and test.
To uninstall any extension, select it and click the "Uninstall" button
-
I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
-------------------------------------------------------------------------------------------------------------------------------------
For Windows 7:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html-------------------------------------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the prompt here if
necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html-------------------------------------------------------------------------------------------------------------------------------------
If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Maybe you are looking for
-
Change the color of the counter
We have an application that would be really the meter or the caliber, I hope we could change the color. I've searched the forums and while it's a little change of color of eacharea, there is nothing on [i] Add [/ i] areas or change the [i] [/ i] area
-
Help! Says the file can't be flat, .mswmm file, but the program made the film. I used the Windows to make a film, I scanned 458 pictures, done my book of stories, etc. with music - took a month... I "published" and now when I go to open it it says '
-
Scanned Documents are not saved on computer.
I have a HP Officejet L 7680 running on a Windows 7 64 bit computer. Everything was fine until I downloaed the latest version of the software (Version 14) HP. Now when I scan a document it will not save the document to your computer. I have run th
-
How can I stop the window to full screen?
I move a window on the left side, and most are off the screen. If I'm not aware that the cursor hasreached the top of the office, it will break full screen when I release the mouse button. What should I do to block this "feature". I never wanted ful
-
How you add cash for the new Portfolio Manager?
How can you add cash for the new Portfolio Manager. It is not MSN Money application is simply Money Portfolio Manager.