MathScript module required for the performance of nodes?

Similar Questions

• What is absolute minimum Plug and the memory required for the performance of modern editions of Firefox?

  I am running a machine Windows XP Service Pack 3 on 512 MB of ram and I am perfectly happy with Firefox 28. But I considered up-to-date. However I'm not sure that my machine can handle anything beyond version 28 and 29 (which I didn't like and so back to 28 anyway) it is interesting trying to update, or do I stay with what I have?

  Hello

  You can check the system requirements here:

  • https://www.Mozilla.org/en-us/Firefox/32.0.3/system-requirements/

  It is highly recommended that you update to the latest Firefox to keep up-to-date with security updates. Note that if you don't like the interface for Firefox 29 +, there are extensions that can return the theme of an interface, you are more at ease.

  • The Restorer of classic theme to bring back the old design. Learn more here: How to make the new look of Firefox as the old Firefox.

  For more information on the themes of Firefox, see the article use themes to change the appearance of Firefox.

• [INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

  Hi all

  12 c

  Win7 64 bit

  I install 12 c, but I encountered error:

  

  [INS-30131] Failure of initial installation is necessary for the performance of the controls of the installer.

  Cause - failed to access the temporary location.

  
  

  Action - make sure that the current user has required permissions to the temporary location.

  Additional information:

  Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".

  
  

  What temp file should grant permissions to?

  Thank you very much

  JC

  Hello

  Details of the exception - GLWB-11322: one or more node names 'oracle_training' contains one or more invalid characters following "_".

  Line underscore or annoying characters on your node name cause problem. What is the name of node? Please change it will solve the problem.

  Current version 12101 is to have this constraint. See MOS: 1957895.1

  -Pavan Kumar N

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• A gateway is required for the RAC environment?

  Question:
  
  A gateway is required for the installation of RAC, General information on the RAC environment?
  *.. If so, why? *
  
  Thank you very much
  
  
  
  I do this test with my single node RAC
  
  1. run with the gateway:

  [oracle@linux1 ~]$ crs_stat -t
  Name           Type           Target    State     Host        
  ------------------------------------------------------------
  ora....SM1.asm application    ONLINE    ONLINE    linux1      
  ora....X1.lsnr application    ONLINE    ONLINE    linux1      
  ora.linux1.gsd application    ONLINE    ONLINE    linux1      
  ora.linux1.ons application    ONLINE    ONLINE    linux1      
  ora.linux1.vip application    ONLINE    ONLINE    linux1      
  ora.orcl.db    application    ONLINE    ONLINE    linux1      
  ora....l1.inst application    ONLINE    ONLINE    linux1      
  ora....test.cs application    ONLINE    ONLINE    linux1      
  ora....cl1.srv application    ONLINE    ONLINE    linux1
        
  [oracle@linux1 ~]$ srvctl status database -d orcl
  Instance orcl1 is running on node linux1

  Every thing seems OK!
  
  
  
  2. run without gateway (empty parameter):

  [oracle@linux1 ~]$ crs_stat -t
  Name           Type           Target    State     Host        
  ------------------------------------------------------------
  ora....SM1.asm application    ONLINE    OFFLINE               
  ora....X1.lsnr application    ONLINE    OFFLINE               
  ora.linux1.gsd application    ONLINE    ONLINE    linux1      
  ora.linux1.ons application    ONLINE    ONLINE    linux1      
  ora.linux1.vip application    ONLINE    OFFLINE               
  ora.orcl.db    application    ONLINE    OFFLINE               
  ora....l1.inst application    ONLINE    OFFLINE               
  ora....test.cs application    ONLINE    OFFLINE               
  ora....cl1.srv application    ONLINE    OFFLINE               
  
  [oracle@linux1 ~]$ srvctl status database -d orcl
  Instance orcl1 is not running on node linux1

  Something is wrong!

  By default, default gateway of the server is used as the target ping during action Oracle RAC 10 g VIP status check.
  After a ping failure, Oracle will decide that the current interface where the VIP is running has failed and will introduce
  an interface / failover of the internode VIP.

  In above case, we used a single node for installation of CRS, so the VIP couldn't failover to other nodes and so reported an additional as error:
  CRS-1006: no more members to consider
  CRS-0215: could not start resource 'ora.dbtest2.vip '.

  Try->
  A FAIL_WHEN_DEFAULTGW_NOT_FOUND parameter in the file
  $ORA_CRS_HOME/bin/racvip to fix this problem.

  The following steps will fix the problem of departure of VIP for above mentioned scenario.

  1 - Stop applications
  2 - as root,
  VI the script $ORA_CRS_HOME/bin/racgvip and change the value of
  variable FAIL_WHEN_DEFAULTGW_NOT_FOUND = 0.
  3. start the application and you should see online resources

  You can proceed to netca and dbca to create a RAC database after that.

• The requirements for the universal Clipboard not correct?

  Hello

  The requirements for the universal Clipboard for iMac is not correct. It should work on my iMac mid 2011, but it doesn't. It works on my Macbook Air mid-2013, so I know it works in general.

  You do not discuss Apple in these forums, we are all users like you.

  If you have any questions please ask, however if you have any comments for Apple please leave at www.apple.com/feedback.

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• The amount of space (memory) required for the good functioning of Firefox?

  The amount of memory required for the operation of Firefox? Trying to decide between IE and Firefox. Research in the new computer and need to think about which browser to use, and how much space it needs to work properly.

  You need no more than 40 MB for the operation of Firefox.

• where the requirements for the current download? This used to be posted prominently.

  where the requirements for the current download? This used to be posted prominently.

  See:

  • http://www.Mozilla.org/en-us/Firefox/24.0/system-requirements/

  You can find the full version of the latest version of Firefox 24.0 in all languages and for all systems operating here:

  • http://www.Mozilla.org/en-us/Firefox/all.html

• During the installation of Firefox 4 beta, he told me that it does not work on my Mac. When I go to system requirements, need a page for Firefox3.6 requirements. Where can I find the requirements for the beta?

  The link to the minimum configuration for Firefox 4 beta takes you to a page that gives you the requirements for Firefox 3.6 instead. I guess that the requirements for the beta are different, that I can't seem to install the beta on my Mac. Where can I find the beta version of system requirements?

  Firefox 4 will not work on the Mac PPC, for Mac it needs the Intel processor. There is an accumulation of third parties based on Firefox 4 beta, which should work on Mac PPC, for details, see http://www.floodgap.com/software/tenfourfox/

• DDL required for the complete installation was not found. Error 1603. What should do?

  DDL required for the complete installation was not found. Error 1603. What should do? A link where to download the required DLL? Kindly help please.

  I tried everything, but received the same message. Attached to the screenshot.

  

• What are the network requirements for the remote server of the Panel?

  What are the network requirements for the remote server of the Panel?

  I tried for awhile now to set up a Control Board.  I can connect to my remote panel of computers from other computers on my local network but nowhere else.

  Whenever I use web publishing tool gives me a URL in this format: Http://Computer-Name.Corporate-Name.local:8086 / VI - nom.html apparently it means I have a local DNS server and this URL is meaningless to the public.

  When I try to connect with the Operate > Connect to... remote control, I get this error message:

  "Connection to Server remote panel...".
  "Connection refused by the server remote control specified: make sure that the LabVIEW Web server is enabled on the specified server.

  I got the same error when I tried to host a remote panel from my laptop at home, on my Wi - Fi.  Is there some network settings or firewall I'm not seting?  Would it be my server or the router or the private network?

  My goal is to be able to host remote panels of my laptop while I'm on the international scene, creating using 4 G internet mobile.  Is it still feasible?

  As he Turners on my router had to be put in place so that my Port is in the rage of transfer.  Also I had to disable DHCP.  Without that you cannot host behind a router.

  These are the instructions I put fallow:http://digital.ni.com/public.nsf/allkb/B1E9A3D78BAED949862573AD0065D4D2

• Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

  Hi all

  I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

  My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

  

  The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

  

  But in this case, when I run it, it shows the error I mentioned in the subject line.

  If you need more information about my project to identify the problem, please let me know.

  Thanks in advance.

  S ' Please example from model that comes with labview First
  Go to labview Help > find examples and you can search for example.
  -You create model with angle range and what kind of special criteria you want to use.
  -To do this you must use IMAQ learn pattern before using IMAQ model Match 4
  Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/

• Requirements for the Labview 8.6 run-time engine

  Hello

  are there system requirements for the LabVIEW 8.6 run-time engine? for example, same system requirements for LabVIEW 8.6? Internet Explorer 5 is perfect? or Internet Explorer version 6.0 or later is good? It works for Firefox on a Linux Athena mechine?

  Thank you

  Cynitha

  The system requirements can be found in the Release Notes. Pages 2 and 3 indicate the specific requirements for the Run-Time Engine by platform.

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think