Max reached (excel smartview)

Similar Questions

• The user max reached via https (IPS 4260)

  If I try to connect https written this user max reached. Reset did not help.  May need to remove a few signatures and the inspection complete-100 configured interface?

  

  

  Mike-

  I see that you run signature and version 7.0 (4) output 601.

  It is a bad combination and can cause your sensor to lock up. You will need to upgrade your operating system to 7.0 (6), and then apply the latest pack of Signature (you have 30 days after the expiration of this license, so hurry).

  This may solve your problem, but even if this is not you should do this in any case.

  Here's the thread discussing the problem of version of the operating system/GIS:

  https://supportforums.Cisco.com/thread/2109620?TSTART=0

  -Bob

• ORA-1631: extensions # 505 max reached in the APPLSYS table. WF_NOTIFICATION_IN

  Platform: RHEL 4u5

  Application: 11.5.10.2

  Database: 10.2.0.4

  Installation of 2 nodes as follows:

  1 node for DB and simultaneous

  1 applications node.

  We have activated the OWF Mailer services September 2 and 5 September we began to receive following error messages in our DB contnuously journal newsletter:

  ORA-1631: extensions # 505 max reached in the APPLSYS table. WF_NOTIFICATION_IN

  
  So, we stopped the OWF Mailer services and listeners of the Agent.

  Got a note from metalink 152475.1 but confused to change the definition of the table because I believe that these linked Oracle Workflow tables are integrated Oracle objects one custom.

  Thus, it will be ok to increase the Maxextents for this table?

  Hello

  Yes these tables are standard, built in objects, but you can implement the solution that these changes of plan of action the default characteristics of the table and doesn't change the features of the tables.

  I recommend to make the respective change on the test instance and to implement in the case of Production accordingly.

  Thank you &

  Best regards

• [MS Excel] SmartView connection manager

  Hello
  
  I am trying to connect with my Excel SmartView to the Essbase server.
  Somehow things are going well. The connection
  through services shared (apparently without interoperability at the end), or the
  Hyperion System 9 Bi + Provider connection works.
  
  [Screen-1 | http://metalray.redio.de/dokumente/smartviewproblem.JPG]
  
  My Essbase runs and I am able to view my cubes.
  
  Thanks a lot for your suggestions

  Hello

  Have you installed Analytic Provider Services (APS) and configured in environmental assessments?

  If you have and execution set to the top of the connection to excel using 'The URL provider' and then "Hyperion provider", the connection string musthttp://: 13080/aps/SmartView

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Form data in Excel Smartview

  Hi all

  I am currently using hyperion planning 11.1.2.3, I created a form with write access data directly in excel.

  I defined point of view, the columns and rows to fit my needs.

  Now, I want to enter data: I get the numbers on the grid, the cells become yellow, I click on send data, the cell becomes gray again and a zero is displayed.

  It seems that the value has not been updated!

  could you help me please?

  Thank you in advance.

  Best regards.

  Toufik

  What is a multi currency application? If for data entry is done locally. After entering data, you can run the currency conversion script to move it into the reporting currency.

  Read more

  http://docs.Oracle.com/CD/E17236_01/EPM.1112/planning_user_11122300/ch09s01.html.------

  http://docs.Oracle.com/CD/E17236_01/EPM.1112/planning_user_11122300/ch09s03.html

  http://docs.Oracle.com/CD/E17236_01/EPM.1112/planning_admin_11122300/ch12s04s22s01.html

  http://docs.Oracle.com/CD/E17236_01/EPM.1112/planning_admin_11122300/ch04s08.html

  Concerning

  Celvin

  http://www.orahyplabs.com

• INTEGER max reached...

  Oracle 11 g 2

  I wanted to know if anyone has experienced to achieve the maximum range of the INTEGER 2147483648 number. We are rapidly approaching that value. It's a PK column that is generated using a sequence.

  I know that we can change the data type to NUMBER (p, s) but we would maybe in the entire table (which is quite large) lock at the time.

  Any other ideas?

  Thank you.

  JohnSpencer wrote:

  Just curious, where do you find a maximum of 2147483648 integer, because it is not in the database, unless you have you defined column in a strange way. \

  Of PLS_INTEGER and of simple integers (11g) have a range-2, 147, 483, 648 through 2 147 483 647

  I assumed he was using those since that he gave this beach

  Of course, now that you mention it, these 2 data types are not "allowed" in SQL, are they

  Good hook

• SmartView support

  We are on Essbase 11.1.2.3 Patch 500 and the transition of the Add - in Essbase Excel SmartView. My users have tested the SmartView 11.1.2.5.520 version and the feedback has been mostly positive. There are 2 questions tests with SmartView APWG and we are curious if someone else encountered these problems and if there is a solution or workaround?

  1 formula preservation of formulas within a range of grid during a cancellation.

  2. allow the cancellation on your first update. Currently, the Cancel button returns only your grid to a previously completed recovery. If someone were to type a member during their first update name, they are unable to make a cancellation to return their spreadsheet their original configuration before the update. The Add-in Essbase flashback has the ability to return the worksheet to its previous state.

  Thank you

  The first is a known bug that is listed in the readme file. The other kind of logic. When you recover, he puts in buffer the contents of the sheet (I mean that it saves it as a hidden sheet XML before the first recovery, there is nothing to save

• Updating of multiple grids on a spreadsheet with SmartView

  Hello everyone,

  I get an error after refresh report via excel SmartView ("I tried both ways: to run vba code or directly by running smartview features")

  "Smart View managed an unknown exception thrown by Microsoft office '.

  
  

  
  

  Someone has an idea?

  
  

  Thank you very much for
  

  Hi Dan,.

  It is one or more sheets.

  What version of Excel? Excel 2013, but I think that's not the problem...

  The refresh action that I used is written in VBA and smart view functions. I use a personal library - programmed to adapt to our environment.

  It's strange to this error, because the report retrieved with the correct data/values. I don't care...

  To resolve this issue I just change the HypMenuVRefresh of HypRetrieve (sheetName) function in the part of code that refreshes the reports

  Thanks and thanks for all the people who have tried to help

• Why drill-through of SmartView happen to a "no data to display" landing page?

  Hi guys,.

  EPM 11.1.2.3.500

  Exalytics

  Drill-through planning of forms to works very well FDMEE then to Excel/SmartView/Essbase happens to an empty FDMEE landing page.

  Y at - it specific settings of SmartView drilling?

  Thank you

  Rafael brands

  It is not currently possible.

  Please take a look at the ERPI: drill through not showing all data from Smartview (Doc ID 1538803.1)

  Thank you

• Essbase Excel add-in does not

  Hi all
  
  I installed the hyperion 11.1.2.2 version in windows 2008 server (64-bit system)
  
  Server is in place and works very well. !
  
  I installed the Excel add-in, and then I got a problem here. When I opened excel, Smartview is indicated at the top but Essbase does not appear. I tried so many ways, but no use.
  
  give me some suggestions about solving this issue... !
  
  Thank you
  Mady
  
  Published by: mady on November 27, 2012 11:46

  Mady, I hope that you were not trying to open the supplements directly from Windows. The XLL Essbase XLA work in Excel like Add-Ins, and not as executable files. When I double-clicked the XLL and XLA, I got the Microsoft Security warning, which I assume is what you were doing wrong. You can also google Excel add-ins on the way to handle it if you don't know what to do. It is very simple.

• AP is not join my controller

  My WLC is AIR-CT-2504 soft version 8.0

  AP is AIR-CAP1702I-C-K9

  Internal DHCP using at the WLC.

  AP is not to join

  Here is the output showing AP. What should I do to solve the problem?

  AP5c83.8f38.0a98 >
  * 2 jan 22:42:45.999: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2214 retransmission count Max reached for the 0x59AFA94 connection!

  * 2 jan 22:43:15.999: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 192.168.14.5:5246
  * 2 jan 22:43:35.999: AP a MIC SHA2 certificate - use SHA2 MIC for DTLS.

  * 2 jan 22:43:36.000: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.14.5 peer_port: 5246
  * 2 jan 22:44:05.999: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2214 retransmission count Max reached for the 0x59B0A90 connection!

  * 2 jan 22:44:35.999: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 192.168.14.5:5246
  * 2 jan 22:44:35.999: AP a MIC SHA2 certificate - use SHA2 MIC for DTLS.

  * 2 jan 22:44:36.000: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.14.5 peer_port: 5246
  * 2 jan 22:44:36.103: % CERTIFICATE_INVALID_NOT_YET_VALID-3-PKI: certificate chain validation failed.  The certificate (SN: 10A26FD200000004825B) is not yet valid period of validity begins at 02:38:37 UTC Sep 11 2015Peer certificate verification failed 001 a

  * 2 jan 22:44:36.103: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/CAPWAP/base_capwap_wtp_dtls.c:496 verified certificate failed!
  * 2 jan 22:44:36.103: % DTLS-5-SEND_ALERT: send FATAL: bad certificate alert at 192.168.14.5:5246
  * 2 jan 22:44:36.103: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 192.168.14.5:5246

  Hello

  It seems that the DTLS/tunnel WLC AP does not form.

  you have set up on WLC of NTP?

  check it out by going on controller > NTP > Server.

• 2602AP will not register with the 5508 controller

  Hello all-

  We have a 5508 controller that manages the HA to about 20 branches - each branch has its own subnet. We have a single branch (subnet) with new 2602 AP who will not register with the controller. All communications to that subnet appear normal and there is no ACL in place between the AP and the controller. The AP is able to resolve the IP address of the controller via DNS and start the registration process, but then timeout. We have installed 2602 AP successfully to other areas of the branch and they fit without any problems - it is a problem only in one branch. I have attached a few debug messages below for a single point of access (it's a production environment, so I analyzed useless info) and also included messages from the console to a different access point (the console AP messages are the same). There are currently 9 AP here and none of them will record this. Any ideas?

  Capwap debug events:

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:39:32.992: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:39:32.992 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:39:42.903 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  * spamApTask0: 14:57:52.301 Dec 11: DTLS closed connection events receivedserver e8:ba:70:dc:d1:c0 (10:5:13:4 / 5246) client (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 no entry there for AP (10:29:9:190 / 44306)

  * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 entry no. AP exist in the temporary database for 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

  * spamApTask0: 11 Dec 14:57:53.916: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

  * spamApTask0: 14:57:53.916 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

  * spamApTask0: 14:58:03.824 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

  Debug Capwap errors:

  * spamApTask0: 11 Dec 15:17:33.715: e8:ba:70:dc:d1:c0 abolition PT 10.29.9.190 which has not been surveyed

  * spamApTask0: 11 Dec 15:17:33.716: e8:ba:70:dc:d1:c0 DTLS connection has been closed

  Debug Capwap Details:

  * spamApTask0: 11 Dec 15:24:29.419: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:35.542: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:41.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:24:49.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 11 Dec 15:25:29.420: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

  * spamApTask0: 15:25:29.420 Dec 11: connection of DTLS 44:2 b: 03:9's: d1:10 0x1a1703c8 closed by controller

  * spamApTask0: 15:25:29.421 Dec 11: msg closed connection CAPWAP DTLS

  Journal of the Console from the AP:

  Translate "CISCO-CAPWAP - CONTROLLER.ad.pps.k12.va.us"... the domain server (10.29.8.3)

  * 00:00:57.511 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings. [OK]

  * 00:01:10.511 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:05:56.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 16:06:17.495 11 dec: % CDP_PD-2-POWER_LOW: all disabled radios - NEGOTIATED WS-C3560E-24PD (68bc.0c03.8015)

  * 11 Dec 16:06:28.231: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:06:55.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:06:55.999 3 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:07:06.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:07:07.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  * 11 Dec 16:07:39.151: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  Kern of logging mechanism

  ^

  Invalid entry % detected at ' ^' marker.

  emergency logging trap

  ^

  Invalid entry % detected at ' ^' marker.

  * 16:08:06.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

  * 16:08:06.999 11 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

  * 16:08:17.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

  * 16:08:17.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Selected MWAR 'IRC-WLC-5508'(index 0).
  *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Go join a capwap controller
  *Dec 17 15:53:47.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246
  *Dec 17 15:54:23.131: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!
  

  Get much better.

  WAP has selected the 5508 with good firmware.  WAP sends a JOIN request to 10.5.13.4 but cannot recover anything.

  Firewall?  Routing loop?

  What so-called "remote site", how is it connected to your office?  Dark fiber?  INTERNET SERVICE PROVIDER?

  You know what?  Can you post the output in the following commands:

  1 WAP: sh of stocks;

  2 WLC: sh sysinfo

  Nuts, I should already posed for these info before.

• Old famous problem - AP LAP1142N cannot join the controller - 4402, please participate, we will make a good guide!

  Hello people,

  I'm sorry for bringing this debate again. I would not dare to ask this question, if I find someone is clear cut suggestion/solution or an overview giving a detailed step by step procedure. Just people suggest jumping through hoops as much as the reset of the AP or conversion to stand-alone mode and then back to LWAPP.

  Therefore, I have so many questions and hope that we can make a good guide that covers all possible problems.

  (1) AP originally ran a stand-alone image.  I started in so-called ROMMON or AP mode (ESC is the right key to start in this mode)

  I found a recovery image in its flash - c1140-rcvk9w8-mx. I did start it AP with him using the 'set' command and I see that it start to boot using this recovery image. That is the question. All the parameters of the AP matter? For example, when I run the command "set" of the PA, I see the following:

  AP: the value

  ?=

  DEFAULT_ROUTER = 10.0.0.1

  Default_router = 10.9.99.1

  ENABLE_BREAK = yes

  IP_ADDR = 10.0.0.1

  IP_AddR = 10.9.99.9

  MANUAL_BOOT = no

  NETMASK = 255.255.255.224

  NEW_IMAGE = yes

  PWR_INJECTOR_DETECT = 0016.c7fa. B394

  RELOAD_REASON = 9

  ROM_PERSISTENT_UTC = 1014941470

  TERMLINES = 0

  subnet mask = 255.255.255.0

  (2) how do something like "write erase" or even to recover the enable password while being in AP mode? Do I really need to do? What I see then makes me believe there is something with the AP (including SSH) configuration that prevents a join AP WLC.

  (3) the access point is turned on, connected to the switchport on the same VLAN L2 where WLC management interface. Then it starts and gets an IP address from the DHCP server located on another switch.

  * 00:00:08.695 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 00:00:08.705 Mar 1: % CDP_PD-2-POWER_LOW: all disabled radios - AC_ADAPTOR (0000.0000.0000)

  * 00:00:09.629 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to

  * 00:00:17.534 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface GigabitEthernet0 assigned address DHCP 192.168.1.122, mask 255.255.255.0, hostname AP2

  Here's the question, why I see this on the console (pay attention to the line "transport input ssh")? It has nothing to do with an error for DTLS?

  * 12:44:21.034 Apr 12: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 12:44:31.000 Apr 12: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.141 peer_port: 5246

  * 12 Apr 12:44:55.000: DTLS_CLIENT_ERROR:... /DTLS/dtls_connection_db.c:1924 retransmission count Max reached!

  * 12:44:55.000 Apr 12: % DTLS-3-HANDSHAKE_RETRANSMIT: Max retransmit count for 192.168.1.141 is reached.

  entry ssh transport

  ^

  Invalid entry % detected at ' ^' marker.

  (4) what I need to connect the PA-Manager controller interface to the network, or I can count on the AP the WLC find through its management interface. I've never worked with the 4400 series controllers. It all started with 5500 and they do not have the ap interface - manager.

  Cisco Guide says: "the management interface is also used for communications between access points and WLC layer two", so I assume that this is enough. Moreover, I can ping the AP of the WLC when connected to WLC via SSH and its management interface.

  (5) and finally, what is the problem with the discovery? That's what I see on the controller debugging capwap packages:

  Debugging (cisco Controller) > * spamReceiveTask: 12:53:52.253 Apr 12: <  start="" of="" capwap="" packet ="">>

  * spamReceiveTask: 12:53:52.253 Apr 12: control of CAPWAP mesg 192.168.1.122 Recd, Port 57046

  * spamReceiveTask: 12:53:52.253 Apr 12: 4, HLEN, Radio ID 0, WBID 1

  * spamReceiveTask: 12:53:52.253 Apr 12: Type of Msg: CAPWAP_DISCOVERY_REQUEST

  * spamReceiveTask: 12:53:52.253 Apr 12: Msg length: 29

  * spamReceiveTask: 12:53:52.253 Apr 12: Msg SeqNum: 0

  * spamReceiveTask: 12:53:52.253 Apr 12:

  * spamReceiveTask: 12:53:52.253 Apr 12: Type: CAPWAP_MSGELE_DISCOVERY_TYPE, length 1

  * spamReceiveTask: 12:53:52.253 Apr 12: Type of discovery: CAPWAP_DISCOVERY_TYPE_UNKNOWN

  * spamReceiveTask: 12:53:52.253 Apr 12:

  * spamReceiveTask: 12:53:52.253 Apr 12: Type: CAPWAP_MSGELE_WTP_FRAME_TUNNEL, length 1

  * spamReceiveTask: 12:53:52.253 Apr 12: the Tunnel Mode of frame WTP: NATIVE_FRAME_TUNNEL_MODE

  * spamReceiveTask: 12:53:52.253 Apr 12:

  * spamReceiveTask: 12:53:52.253 Apr 12: Type: CAPWAP_MSGELE_WTP_MAC_TYPE, length 1

  * spamReceiveTask: 12:53:52.253 Apr 12: WTP Mac Type: SPLIT_MAC

  * spamReceiveTask: 12:53:52.253 Apr 12:

  * spamReceiveTask: 12:53:52.253 Apr 12: Type: CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, length 10

  * spamReceiveTask: 12:53:52.253 Apr 12: identifier of the seller: 0 x 00409600

  * spamReceiveTask: 12:53:52.254 Apr 12:

  Discovery and how are we? L2 or L3?

  What about the rest of this thread is all over the place...:

  Can you confirm that the Interface of management and the Manager AP are both in the same vlan, same subnet and are configured with the same Port number?

  All these cases to 1 FPS and which port to connect has concerned me divide you the ports or something...

  The first provided newspapers imply that the AP could not reach at the AP Manager (but that the discovery of the Management Interface was very good)

  Newspapers second condition means that the AP never discovered a WLC at all (no attempt to join)...

  But then again, as Leo referenced, the area of Canada that I guess is a no - n... so maybe that was your problem original throughout and the 3600 join just because it is not compatible.

• Security planning vs Essbase in Shared Services (v.11.1.2.2 and v.11.1.2.3)

  
  Hello. Is it possible in v.11.1.2.3 or v.11.1.2.2 planning to restrict access through shared Services so that a user is forced to access data through a form of planning Planning Excel Smartview and that the user cannot directly access the Essbase cube and run ad-hoc queries? We try to apply data and governance processes so that users must perform their updates and queries via the planning of forms in SmartView calc Manager rules are executed, etc.

  Thank you!

  You need to remove the access Essbase writable & rights special user for these users.

• Debian Squeeze and upgrade problems

  Hello

  I have problem with Vmplayer 4.0.2 when I run

  apt - get upgrade

  If the debian update package needs to work with /etc/rc2.d/ (example: apache2, mysql,...) there is a conflict with

  /etc/RC2.d/K08vmware-USBArbitrator

  /etc/RC2.d/S50vmware-USBArbitrator

  I get

  insserv: WARNING: the 'K01vmware' script lacks LSB and replacement tags
  insserv: WARNING: script "K08vmware-USBArbitrator" missing LSB tags and substitutions
  insserv: WARNING: scenario 'vmware' missing LSB tags and overrides
  insserv: WARNING: script 'vmware-USBArbitrator' missing LSB tags and overrides
  insserv: there is a loop between rmnologin and mountnfs if start service
  insserv: loop involving the service mountnfs at depth 6
  insserv: loop involving the nfs-common 5 in-depth service
  insserv: from vmware-USBArbitrator depends on rmnologin and thus ease of system "$all" that can't be true!
  insserv: from vmware-USBArbitrator depends on rmnologin and thus ease of system "$all" that can't be true!

  ...

  
  insserv: from vmware-USBArbitrator depends on rmnologin and thus ease of system "$all" that can't be true!
  insserv: depth of recurrences Max reached 99
  insserv: loop involving the exim4 to depth 7 service
  insserv: loop involving the service mountnfs-bootclean at depth 8
  insserv: there is a loop between rmnologin and mountall if starts service
  insserv: loop involving the mountall to depth 3 service
  insserv: loop involving the function sleep extended cleaning in depth 2
  insserv: there is a loop between rmnologin and checkroot if starts service

  ...

  insserv: loop involving service vmware-USBArbitrator at depth 1
  insserv: there is a loop between rmnologin and mountall-bootclean if start service
  insserv: loop involving service mountall-bootclean at depth 1
  insserv: leave now without changing boot order!
  updated - rc.d: error: insserv rejected the script header
  dpkg: error processing module-init-tools (-configure):

  the subprocesses of post-installation script installed returned an error of status output 1
  configured to not write the contribution reports

  ...

  To upgrade debian packages, I remove vmplayer, run apt - get upgrade and then reinstall vmplayer.

  Is there another solution?

  Kind regards.

  --

  Stéphane.

  Here's a similar thread, it may be useful...
  http://communities.VMware.com/thread/337769
  Sakibpavel