Debian Squeeze and upgrade problems

Similar Questions

• L 10/102: connection with WLAN graphics card and upgrade problems

  I need some information. I have a Satellite L-10/102. I would like to change the graphics card of 64 MB to 128 MB. Is this possible? Second, I can not connect to the wireless network. The error message looks like "your device is not connected. When I try to connect I get other error messages. Could someone help me on these two problems? Thank you.

  [Edited by: admin August 28 05 19:08]

  Hello

  The solution for your RAM graphics card will depend on what manufacturer of BIOS you have.

  On my A30, I increased the allocation of RAM graphics in the BIOS (Phoenix) from 64 to 128 by changin the setting of the AMU. (The options available are 16 MB, 32 MB, 64 MB, 128 MB).

  I think that some other BIOS manufacturers do not include this option.

  HTH

• I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my Applications

  Please refer to I have Photoshop CS5.1 Extended with free upgrade to CS6. How do I re acquire this upgrade?  I upgraded my laptop from Vista to Windows 7 and had problems with the way he ran I did a full clean install of Win 7 and am trying to re install all my

  (Double Post)

• Toshiba NB100 ACPI & WIFI on Debian Squeeze

  Hi, it is perhaps a good place to ask.

  One morning, I founded my netbook completely hung. So I turned off and restarted, but it hung in new and latest lines on the screen where the ACPI: _OSI (Linux) ignored BIOS query. From now my linux can start very well just with the following kernel options: nolapic noapic, acpi = off, acpi = noirq and my atheros wireless card does not work. A strange thing is that this wireless card is now detected by lspci as AR5001, but before it was detected as AR242x. I tried the madwifi and ath5k drivers, but does not. On the touchpad, it is activated and I can activate and deactivate by pressing fn + f1

  This is the result of lspci with the ath5k driver

  02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev ff) (prog-if ff)
  !!! 7F of type unknown header

  So I upgraded the BIOS to latest version 2.10, but it remains the same. Tried to boot with knoppix usb stick and it to 'start the nucleus' without freezing kernel options.

  My system is Debian Squeeze.

  So I don't know what's going on, can someone help me with this?

  Thank you

  Hello

  It seems that it s not the right place to ask this question here. The point is that most Toshiba laptops come with Windows and not with a distribution of Linux. Also I m not a Linux user, but I have based this interesting article:

  http://APS2.toshiba-tro.de/KB0/FAQ35006X001BR01.htm

  Good luck! :)

• RAM upgrade problem: Flash the BIOS? or upgrade the processor?

  Hi, I jumped in with both feet and now need help to get out me!

  I have a desktop PC HP Pavilion Elite HPE-470uk who becomes a bit slow (processor card here http://ark.intel.com/products/48505/Intel-Core-i3-550-Processor-4M-Cache-3_20-GHz). After you have added a bluray player that I noticed that it's getting a bit slow so thought I would add little RAM.
  

  I bought a few Hyper X8GB of HyperXbeast 1600hhz, slipped in and the PC did nothing but to turn on and off several times. I checked the two sticks and they both do it. I then (plow in front) checked what memory, the processor can handle and discovered "The Intel® Core™ i3 - 5xx / Intel® Core™ i3-21xx processors handle memory DDR3 1066/1333 MHz" by http://www.intel.com/support/processors/corei3/sb/CS-031175.htm

  After a discussion on another forum, that it has been suggested that I have updated the BIOS because it can allow the processor to manage memory 1600 mhz, but I don't know where to start on this or what version to selected download. I'd appreciate any help you can offer on this.

  The other way, that I can see is to update the processor itself. I thought of nothing too fancy just an i5 because it will allow me to run 3d blurays and should allow me to run some apps at the same time. After reading this http://m.wikihow.com/Upgrade-a-Processor it seems too complicated. Is it really just a matter of taking off the fan, declipsant the old processor, nine droping in and then put on some cooling stick stuff?

  Or should I just return the memory and get good memory?

  See you soon

  Atdot.

  Here are the specifications of original factory for your desktop HP Pavilion Elite HPE-470uk and its card mother MS-7613 (Iona-GL8E). Based on these specifications, this model can support up to 16 GB (4 GB x 4 DIMMs) as follows:

  Dual channel memory architecture
  Four DDR3 DIMM sockets (240 pin)
  PC3-10600 (DDR3-1333)
  PC3-8500 (DDR3-1066)
  Memory non - ECC, unbuffered
  Supports up to 16 GB on 64 bit computers

  In addition, this model can support the following Intel processors;

  Maximum frequency of the processor of the heart < = 2.93GHz
  Intel Core i7 - 8xx (Lynnfield core)
  Intel Core i5 - 7xx (Lynnfield core)
  Intel Core i5 - 6xx (Clarkdale core)
  Intel Core i3 - 5xx (Clarkdale core)

  If you do not have to worry about the update of the BIOS, there is no updates available for your computer BIOS. Honestly, I return the incorrect memory and upgrade to a minimum of 8 GB of RAM. Then, if it solves all your problems, you could also upgrade the processor.

  As the computer is nearly 4 years old, you can consider a factory HP restore to return the computer to a facoty as State. In many cases, it returns original full speed of the computer. The reason why this helps, because the BONE is swollen and clogged over time.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Atheros AR5004G and SP2 problem

  I have read may questions on various forums and it seems that a fix is needed.

  We have recently purchased 4 laptops and upgraded to SP2. I tried the wireless and it connects using DHCP. If I use a static IP address, it will connect but something is not quite right because I can't surf the Internet.

  Are there plans on an update of the driver?

  Hi Andy

  My Tecra is also updated with SP2 and I have no problem with the Wi - Fi connection. In your case if there is some sort of functionality of the wireless card may not be hardware problem just something with the wireless settings. If the books are new it is not necessary to make any driver update. What models of laptops do you have?

  Do you use windows settings for the connection, wireless or by a wireless client? I connect to the internet through the wireless router. Do you use also wireless router? What type of connection do you use?

  As I said, it may be something with the connection parameters.

• Can I restore the backup Windows XP on a new computer with Windows 7 COA and upgrade to Windows 7?

  Original title: upgrade question.

  I currently have a PC running XP in a system with an IDE drive. The system has many applications that the company has moved the installation discs, so I need to move the contents of the entire disk to a new system. I was about to do the following:
   
  System backup with a recovery boot disk, in this case a USB.
   
  Restore the entire operating system to a new system that will have a SATA drive in it. The new system will have a COST for Windows 7.
   
  Start the XP and upgrade to Windows 7.
   
  My question is, will it work or the absence of the COA of XP on the new system will prevent me to install?
   
  Any help would be appreciated.
   
  Thank you
   
  The f

  Short answer, "no, this will not work."

  It is unclear what you mean by 'backup' and 'restore', but it seems that if you are referring to the creation of a disk image or a clone of disk on an external drive and then either restore the image or cloning to the new computer.  Assuming that both of these computers was provided with Windows pre-installed, this process will almost certainly result in a facility that cannot be 'activated '.  In addition, unless the software you use has something like Acronis Universal Restore, restore the image from your old computer to a player in a new computer with a different hardware simply will not work.

  In addition, the lack of an XP license is not the issue.  There are several problems with the process you describe, but basically, an "upgrade" from XP to Win 7 requires a "custom installation" which means that applications should be re-installed.

• Mr. Fix it cannot fix the DVD/CD, reading and writing problem

  I had a problem a few months ago this onc I put a CD in the CD/DVD drive, it can't read and rejected and ask to put a readable CD, then I run Mr. Fix and the problem disappeared. recently just the same problem, I tried Mr.Fix but it cannot solve the problem, then it is there another way to solve the problem

  Best regards

  Ramzi salameh

  Hello

  Step 1: Please do all the same underneath if you did some before as it is often the set of operations which solves the problem.

  Try this double click Control Panel - Device Manager - CD/DVD - device - tab - click on update drivers (this will probably do nothing) - then RIGHT click the drive of the driver - UNINSTALL - REBOOT this will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then work your way through these - don't forget the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs - a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables at both ends. Remove and replace, do not just tight. For laptops, you can often clean power and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some entries in the registry that the troubleshooter does not solve, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the correct registry entries for your car.

  These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more information here and maybe even registry settings correct for your CD/DVD from someone with the same drive model.

  Forums - much real experts help and hardware information
  http://Club.myce.com/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• WRT160N v2 site blocking to the router even after reset and upgrade firmware

  For some reason any my WRT160N v2 router blocks access to the following Web site: www.cngoons.com

  I can connect on the site if I connect to the modem directly, or using the connection to the internet of someone else. However computers that connect through the router is unable to access the site via a web browser (IE, FF or Chrome), cannot ping the site, and a tracert also fails.

  I have reset the router by default, but the site is still blocked. I've upgraded to the latest firmware (WRT160Nv2_v2.0.03.009_US_code.bin) and the problem persists.

  Any ideas on what's going on?

  And after a search even more, I found this old thread dealing with the same question:

  http://homecommunity.Cisco.com/T5/wireless-routers/Linksys-router-blocked-website/TD-p/12917

  A solution is given at the end to change the MAC address of the router (I cloned MAC address of my PC), and then restart the cable modem. It worked for me!

• How can I change the CPU, motherboard and upgraded to Windows 7 while keeping the old HD and all data on hard drive?

  I am running a Pentium Q9300 with Windows Vista. I have change my mother and put card at level of CPU of AMD Phenom II X 4 965. I bought a new copy of Windows 7. I need to update all those things while maintaining the old hard drive. Well, I don't know how to do it without other wipe the HD, fitness with an upgrade of the OS, or a link is not my new Windows 7 to my old hardware configuration. I need to keep all programs, files, folders, and data I have on the hard drive.

  How can I do all three and the link to my new Windows 7 for my new hardware?

  Hello

  You can not do

  the old hard disk contains the drivers for the motherboard that is old and in all likelihood will not start when it is installed with the new motherboard

  a clean install is normally required when changing motherboards

  __________________________________________________________

  and I think that you should also read this on the granting of licences and motherboards:

  If you have a license to OEM preinstalled, DELL, HP, etc any update at the Board level or changes must be done jointly with the computer manufacturer

  an OEM license is linked to the original tho hardware it is installed on this computer life

  When the computer dies the license dies with him, unless the manufacturer is willing to help you

  If you have a retail license and reactivation problems:

  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4. take the phone activation option and brace yourself for a real person instead of the automatic fast process

  ·                        When you do the phone activation process hang to a real person explain to, instead of the following prompts for automatic scenario

  -------------------------------------------------------------------------------------------------

  How to find a phone number for a Microsoft Product Activation Center

  http://support.Microsoft.com/kb/950929

• Hang up during, connect and internet problems on laptop HP15-g019wm

  My portable computer product number HP15-g019wm F9H60UA #ABA has been suspended on the black welcome screen after logging about two minutes before opening on the desktop. My mozilla firefox is slow to open and does not connect to any websites other than the home page. It is upgraded to the latest version, when I first tried to open it and then it opens slowly. Google chrome opens quickly but then freezes when I try to go to another site. My computer is running windows 64 bit system 8.1. Anyone know what could be causing the issues off the phone and internet on my laptop? I was able to connect and browse the internet very well last night, and these problems just started to happen this afternoon. Any help would be appreciated.
  Thank you.
  Lynch10

  He seems to have been a problem during an update, as everything ran as usual on Sunday and continues to do so.
  Lynch10

• I inherited a laptop running Win 7 Enterprise. I've used for a while now and upgrade to Windows Pro 10

  I inherited a laptop running Win 7 Enterprise.  I've used for a while now and upgrade to Windows Pro 10.  I have no problem buying software, but would like to know if there is a way to force an update rather than a clean install, which will let to me having to re - install several months value of applications and the tweaking associated.

  Thank you.

  JLOB

  Try this work around:

  https://www.reddit.com/r/Windows10/comments/3wn9cc/can_someone_with_win_10_home_check_this_for_me/

• Difference between download and upgrade

  Original title: information

  difference between download and upgrade

  To allow us to help you better, please provide as much detail as possible about the problem you are experiencing.

  
  If you design your question effectively, you can get good information from people who are familiar with the subject and who are happy to help you.

  Prepare your question. He thinks through. Hasty-survey questions get hasty responses, or none at all.

  What diagnosis have so far?
  An effective question you will get help read faster how here

• Windows 7 upgrade problem

  I'm trying to upgrade windows 7 to windows 10.  The installation goes to 25% and then stops (x 4).  No error message is triggered, and I waited for hours without success.   When windows 7 is restored there is no specific error message.    What should I do next to address this problem?

  Get help with Windows 10 installation and upgrade mistakes
  http://Windows.Microsoft.com/en-AU/Windows-10/upgrade-install-errors-Windows-10

  You can find the error code for the update has failed by checking your update history.

• Windows update: error code preventing me from to update and upgrade to Windows 10.

  Original title: error codes

  error code preventing me from to update and upgrade to windows 8.1 and Windows Update 10

  Hmm, take a look on...

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76

  Having problems connecting?