Similar Questions

• Unable to connect to the print server after you have disconnected from him

  We have a connected printer directly to a Windows 7 Pro computer, and then using this workstation to share the printer between about 4 other computers.  One of the computers randomly stopped printing to the printer.  I open devices and printers and deleted the printer in the list to try to add again.  Once I removed the printer, I tried to connect to the computer that is sharing the printer (start > \\computerName\), but could not even connect to the computer that hosts the printer in order to reconnect.  Someone had a similar problem? If so, please answer.

  Thank you!

  I discovered the problem resided with Kaspersky Anti-Virus blocking "network attacks".  Once this has been changed, I was able to connect and print.  Thank you, however!

• How to set the number of connections to the server. I am rejected after three connections.

  The following message appears when I consulted three folders in my email...-'unable to connect to the IMAP server. It may have exceeded the maximum number of connections to this server. If so, use the advanced settings of the IMAP Server dialog box to reduce the number of cached connections. »

  You can connect to an IMAP server as often as you like, BUT...
  You can restrict the number of simultaneous channels that are open during this connection.

  Thunderbird sets a default limit of 5.
  You can go higher on some servers, or you can go as low as 1.
  Try to set the limit of connection for 3

  "Tools - account settings - [select your account] - server settings - [settings of the server] - advanced - maximum number of connections to the server for cache - [enter 3]"
  If it is already set to 3, to descend more down - 2 or even 1.
  Out OK

  TB - 38, Win - PC 2

• I can't find the ip address of the print server on my router, DHCP clients

  I got the wireless-g WPS54G print server at a yard sale and have downloaded the Setup Wizard.  Everything looks fine until step 7, select print server.  Could not find anything.

  Before that, I tried to access the print directly through its ip address server, but can't get it.  I checked all the IPS on the main router and found everything except the print server.

  Everything is setup, more than once, exactly as defined in the steps of the installation wizard.

  I have Windows 7 and a computer laptop 64 bit.

  Any suggestion would be great.  I already spent 2 hours on this thing and am determined to make it work.  All the lights on top of the blink/light print server as it should when they should.  I was not wireless yet, still trying to get this Setup program.

  Thank you

  Chris

  Connect to the print server with the Ethernet cable to the Ethernet port on the router.

  Press the reset on the print server for 15-20 seconds.

  You could get the printer test page, mentioning the IP address of the print server.

  If this is not the case, the print server and the router to power cycle.

  Open the router setup page and check if you have the IP address of the print server in the DHCP client table.

• Hi, how to set the maximum number of connections of FMS on the same IP address

  How to set the maximum number of connections of FMS on the same IP address?

  The application.clients object available in action script server-side maintains a list of all clients connected to the Court at this moment here.

  You can browse the table and compare the property Client.ip to determine the max connections from an ip address and therefore accept/reject connections.

  It can be as simple as this in the application.onConnect

  application.onConnect = function (clientObj)

  {

  var totalConnections = 0;

  for (i = 0; i< application.clients.length;="">

  {

  If (application.clients [i] [ip] is clientObj [ip])

  {

  totalConnections ++;

  }

  }

  If (totalConnections > 10)

  this.rejectConnection (clientObj);

  on the other

  this.acceptConnection (clientObj);

  }

  Above the piece of code is untested so you may have to make some changes to make it work, but your solution should look something like this.

• Signature custom for the maximum number of connections

  Hi, is there a signature to check the maximum number of connection to a host attacker to open a port to the victim? or should I make a costom for this signature?

  Hello

  You certainly can do it on the IP addresses, follow these steps in making a signature Atomic-ip looking for a tcp packet with only the SYN flag set on port 443 to the destination. You would then add a number of events for the number of connections you need. According to the site however this will flood the channel alarm with alerts, because traffic going out etc it will trigger. Of course, this can also be problematic with NAT.

  I don't know one of the guys ASA on these forums could give an answer better than me with regard to the configuration of the SAA.

  I understand they'RE a dynamic IP filtering or something that can be used to do this, although I've never configured myself.

  Thank you

  Neil

• Facing the question with the Maximum number of connections Timesten

  Hello

  In my project, I need to increase the maximum number of connections that timesten offers me. So, I changed the setting of the nucleus as shown below in the file/etc/sysctl.conf.

  kernel.SEM = 655 670720 128 1024

  The intention here is to get 500 connections max. But even after this setting too, I get only 477 connections. I don't understand why this is happening. Someone help me understand what is happening here.

  In above configuration, my hypothesis is that 155 semaphores are reserved for internal use of timesten and remaining 500 will be available for me, but this isn't the case. Please, help me in this aspect to understand why I get only 477 connections instead of 500 connections.

  Quick help is very appreciated

  Thank you

  Agnes

  Hi Agnes,.

  Thanks for the release of ttStatus. He explains what is happening and confirms my suspicions (second).

  The setting of the 'Connections' in the DSN attribute defines the limit superior on user connections; that is, connections by applications and tools such as ttIsql, ttMigrate etc etc. There is also the concept of connections 'system' (subdaemon, replication agent, agent of cache etc) that do not count against the total "Connections."

  In your case, the database is in fact properly configured for a maximum of 500 user connections. However, as you can see on the first ttStatus, you already have 23 application direct mode of 4 different connections methods of Java (which leaves the available user 477 connections). I of course have no idea what these applications are but probably your. This means that you are able to open additional connections a 477 application before arriving to the configured limit of 500. And that's exactly what we see; When you run your test application (what happens to connect via client/server), it reached 477 connections and then impossible to create more. As expected.

  Therefore, to allow connections you must:

  1. stop the database (replace ramPoilicy by manual (or inUse), stop all applications, stop the replication agent, unload from memory if the policy is manual)

  2. change the value for connections in the attributes of the DSN to a higher value (perhaps 600) - also, you need to make sure that OS semaphores are high enough to allow this number of connections.

  3. load the database back in memory, start the replication agent, starting applications.

  A a tied note, use of ramPolicy 'always' is not encouraged. In addition to the scenarios 'manual' is a better choice. We can "always" deprecated in a future release.

  Chris

• Maximum number of connection brokers?

  I ran into some odd provisioning issues in our environment view 4.0.1.  After spending a bit of time stable and working with support it seems we have too many connection brokers and the issue seems to be related to problems of ADAM replication.

  My question is where if anywhere is there any limit documented for the number of brokers of the connection you can have in a single configuration of view?  I spent some time flipping through the installation guide and a few other documents for the view.  They list several maximum values, but I couldn't see any specific maximum number for brokers of the connection.  If anyone has seen this documented limit can you let me know the source?

  Thank you

  unless you can find something proving support evil, I take their advice and start to reduce the amount of connection brokers. We have a few VMware View environments, but our more great who has 2800 VPC connected to 3 instances of vCenter uses only 3 brokers.

  The problem is that if the support tells you to do something and you don't have, you kind of you push into a corner.  Reduce the amount of servers in connection to what is recommended and if the problem persists, you have the leverage to tell them, 'now that.

• No available buffer space (maximum number of connections reached?)

  I get the error below on my site.  I am on a shared host running IIS 7.0 and Coldfusion 8.  I called my hosting company and they said it was a script error, but I don't see how it is.  I have the same scripts running on my local server without any problem, and when I got the site on another computer host a few months ago I never had this problem.  Can someone help, even if you can reassure me that he is not a script error I would appreciate it

  Error message:

  Run database query error.

  Communication link failure due to underlying exception: * BEGIN NESTED EXCEPTION * MESSAGE java.net.SocketException: no available buffer space (maximum number of connections reached?): connect STACKTRACE: java.net.SocketException: no available buffer space (maximum number of connections reached?): connect at java.net.PlainSocketImpl.socketConnect (Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:519) at java.net.Socket.connect(Socket.java:469) at java.net.Socket. (Socket.java:366) at java.net.Socket. (Socket.java:209) at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:173) at com.mysql.jdbc.MysqlIO. (MysqlIO.java:267) at com.mysql.jdbc.Connection.createNewIO(Connection.java:2739) at com.mysql.jdbc...

  Whoever you talk to your hosting company is stupid or dishonest.  It is - clearly - a problem with

  your config to the DB, the DSN configuration or the driver itself.

  And nothing to with you, CF code.

  I suggest you escalating the issue to the line manager who you were talking to @ the hosting company.  Once your problem is, and how technology has responded to you.

  --

  Adam

• I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

  I can't get the automatic updates on my samsung jack sgh-i616.

   

  "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

   

  RESULT CODE: 80072ee7

   

  -It is a windows mobile 6.1
  
  
  Thank you very much! = D

  As a guide.

  This error code translates ERROR_INTERNET_CANNOT_CONNECT.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Error downloading emails - error number: 0x800CCC90 - "unable to connect to the mail server!...» »

  De : Regina_Miami

  Good evening
  Today, I tried to download my emails in Windows Mail. I got the following error message:

  Account: 'pop.ig.com.br', server: 'pop.ig.com.br', Protocol: POP3, server response: '-ERR AVG POP3 Proxy Server: cannot connect to the mail server!', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC90

  Could someone help?

  Thanks, Regina

  De : Gary van
  
  The problem is that you allow your antivirus to mess with your email. Which is not recommended for the reasons explained here:
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Chances are, AVG antivirus was installed with the default installation option. If so, uninstall, then reinstall, but select 'custom' install, which then allows you to deselect install his embarrassing module scan to email.

  While AVG is uninstalled, then try Windows Mail, just to check that the culprit has been found.
  --
  Gary van, MS - MVP (Mail)

  Another response of the community of Windows Vista discussion groups

• Exchange server and Surface RT, can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Hello

  Our company uses an Exchange Server for email, contacts and calendar.

  Can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Kind regards

  Matej

  You must install the SSL certificate before connect you to the Regional service, the easiest way is to go to "desktop" IE10 open, go to the exchange server web access page, click on the notification of "certificate error" red and view / install the store "certificate authorities roots of trust." Then, make sure that your surface RT complies with the minimum requirements of security then connect to the exchange via the mail application server.

• Is there a maximum number of keywords in the property?

  Need to know if there is a maximum number of entries for the metadata as keywords fields. Thank you

  You can get additional information from other members of the forum, but I can't right now is there is a limit of 40 characters per keyword and I managed to add more than 120 keywords in a test 'rapid '.

  

• Maximum number of columns in the generic report

  What is the maximum number of columns in the generic report? I put it to 100, but the data that was displayed are always 60.
  
  Thank you.

  Hello

  It is 100.

  Oops, I thought it was, it seems, this maximum has been removed now - see here
  Maximum number of columns in the generic report

  See you soon

  Ben
  http://www.munkyben.WordPress.com
  Don't forget to mark the answers useful or correct ;)

  Published by: Munky on August 28, 2009 11:16

  Published by: Munky on August 28, 2009 11:17

• Every time I open Firefox I get the meesage from follopwing: it's recommended storngly you appl this update as soon as possible. When I have TRD to di, show he's trying to connect to the update server but nothing happens

  Everytime I open Firefox I get the following message: it is strongly recommended that you apply this update as soon as possible. When I try to do, is to show that it is trying to connect to the update server but nothing happens

  You are welcome