maximum performance for storage

Similar Questions

• Satellite 145 turns off when running with a maximum performance (3.4 Ghz)

  Hi people

  Satellite 145 P4 538 / XP HE / 512 MB / 60 GB / 17WXGA / DVD-SupermultiDL /.

  I have a question that stirs in me a right pain in the ass, everytime I run my laptop at full speed (3.4 Ghz) for more than 5 minutes and the laptop is on a flat surface with good air circulation but works hard for example video editing or Gamming the stupid thing is just too hot and goes out... But when the laptop works to mask (1.8 GHz) its fine and dandy just without the factor additional ka-boom...

  ideas for the most part welcomed

  Thank you

  Mike
  E-mail: [email protected]

  Hello

  It seems like your laptop is overheating. You should check the cooling module if possible works with maximum performance. In addition, you can try to clean the fans with the vacuum cleaner. Especially fans can not work properly because of the dust inside the laptop.

  In addition, you can also check the settings for standby power. The cooling module must be set to max.

• What is the best compatible microSD and the maximum capacity for a Tablet android Iconia 10 One?

  Could someone tell me what is the best compatible microSD and the maximum capacity for a Tablet android Iconia 10 One?

  Two possibilities: perhaps the message is that your actual RAM is low, which means that you are trying to run applications too at the same time. Closing some should help a lot. The other is more likely, and that is the internal memory which is running low. There is a lot that can be done to help that, but it is especially dependent on what is causing the space to fill. If this is a case of too many installed applications (when applications are installed by default, they are going to the internal storage, the SD card is generally used only for data), one or more of the app that fills with things very with log files or personal always data in memory instead of on the DD of the.

  Check first for the last. Make sure that your photos, videos and music are all on the SD card. If you find tham in the internal memory, move them. Make sure you say the applications that use where is the new location.

  Then find the application specific data when it shouldn't be. Many file managers will do for you, you are looking for by flying over or logfiles extra-large. Parameters; Applications; Application Manager (or similar, names depend a bit on OS version) should allow you to look at each application data and cache. Those compensation where appropriate will free up the space.

  Finally, look at the applications that you have downloaded. Are there any that you do not use? If so, uninstall them. Note that the system and preloaded apps in general cannot be uninstalled, but you can often remove updates and then disable them in order to free some space.

  Storage on a device Android always tends toward the back of his head and gets the older unit the problem seems to be. If I were a type of plot I would suggest that Google is encouraged to keep buying us new machines every two years... None.

• Small box, Adobe Flash Settings for storage space interferes with videos. It won't go away when you click DECLINE. Windows 7

  This little box pop up asking the storage space appears constantly during the videos, and it won't go away when you click DECLINE.  I tried to DENY EVERYTHING in the settings, but then I couldn't videos, even videos that play, but are covered by the small box of Adobe, asking for storage.  I just never will have access to the videos without the interference of Adobe?

  Hello

  The application that you are running in Adobe Flash Player wants to store some information on your computer, but it needs more space than is currently allocated. Player, Flash displays the amount of space that is currently used for storage and pray the required maximum to save the information.

  You can use the Save Local settings panel to let future applications of this Web site to store information on your computer without asking you for permission each time. To display the Local Storage Panel:

  a. right click on the image for application during its execution.

  b. in the context menu, select settings and then click the Local Storage tab.

  You can also use the Flash Player Settings Manager to manage your settings of local storage at the global level and on a site-by-site basis.

  1. what application you run using Adobe Flash Player?

  2. you are trying to play the videos from the computer or online?

  3. what web browser do you use on your computer?

  Follow the steps below:

  Method 1:

  In the Settings of Adobe Flash Playerpop-up message, check the box never ask again, click allow and control.

  For reference:

  http://www.Macromedia.com/support/documentation/en/flashplayer/help/help07.html#117290

  Method 2:

  Uninstall Adobe Flash Player and reinstall the latest version and check.

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Install the latest version of Adobe Flash Player from the link below:

  Adobe Flash Player:

  http://get.Adobe.com/flashplayer/

  Method 3:

  If you are facing problems in Internet Explorer, and then follow the steps in the link below.

  The video problems when you use Internet Explorer:

  http://support.Microsoft.com/kb/2532294

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  For reference:

  Of local storage pop-up question:

  http://www.Macromedia.com/support/documentation/en/flashplayer/help/help06.html

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Please explain SVmotion (Storage Vmotion) and DRS for storage in simple words

  Friends,

  I little confusing... could you please contact Storage vmotion and DRS for storage in simple words and the important points to remember in this regard...

  Kind regards

  Sirot

  9884106697

  Storage DRS is a feature that you allow warehouses of data aggregated on a single object (cluster) and recommend the implementation of disks in virtual machine based on the performance of the store of data and the available space on the data store.

  The DRS storage uses Storage vMotion to migrate virtual (online) computers from a data store to another to balance data store performance and space.

  You can use Storage vMotion without storage DRS too, moving virtual machine between clusters of DRS storage and warehouses of data even from the local level to the data store shared.

• The difference b/w maximum performance and maximum availability

  Hello
  
  What is the basic difference b/w maximum performance and maximum availability.
  If maximum performance scenarios is used and ensures db stops, changes in the primary db will apply to the next time you start backup db.
  
  Thanx

  Hello

  I have read all answer your thread.

  If you create a broker - managed DataGuard configuration, you can use
  quick start failover (FSFO) for your dataguard.
  When your primary is down, your sleep will change primary role.

  Concerning
  Mr. Mahir Quluzade

• Can I use 8 gb Fibre Channel for storage iscsi traffic and 1 GB for standby

  Environment

  Version - Vmware: ESXi 4.1

  -Host: 360 g-7 DL, 2 x 1 GB quad port NIC, 1 dual CF 8 gb HBAS

  -Storage: EMC VNX 5300 host FC HBAS are directly connected to the San

  Background

  We currently have a 1 GB LAN (Cisco 3750 battery) \storage (san is LeftHand 4500) network that will not provide the e/s, we need for our SQL server due to a limitation of the NMP esxi a company proposes a new solution of storage for us.

  Overview of storage design:

  2, 1 GB of NIC quad by the host in support of our networks (VM\MGMT, vMotion, DMZ, iSCSI).  Add a dual port 8 gb FC HBAS on each host for storage.  I then path redundancy but not the redundancy of HBA cards.  Can I use the existing 2, 1 GB iscsi NIC as the standby for the FC HBA just to limp along until I vMotion, virtual machine to sql server on a server that has a FC HBA?  Obviously the performance of I/o would be take a hit but I rather he would perform badly only totally cut off IO.

  Maybe that's not possible even remotley, but I look forward to comments.  Thank you!

  While I've seen this work his * explicitly * not supported by EMC.

• Question about the MAXIMUM PERFORMANCE mode

  An excerpt of the ML note: 239100.1
  
  

  To participate in maximum performance the following requirements must be met:
  
      Redo Archival Process : LGWR or ARCH
      Network Transmission mode : ASYNC when using LGWR only 
      Disk Write Option : NOAFFIRM
      Standby Redo Logs : No, but recommended and required for Real-Time Apply   

  What is

  Standby Redo Logs : No

  What means? Cannot create a database without Online redo logs. Right?

  Standby Redo Logs are not the same as online newspapers. They are used only in the role of Eve (by RFS background process) to allow primary LGWR.
  You always want to create them regardless of the level of protection. They are (in theory) an option with Max Performance.

  Kind regards
  Uwe Hesse

  http://uhesse.WordPress.com

• How to pay for storage iCloud

  Can I use iTunes credit to pay for storage iCloud?

  Yes - is it possible to pay for the storage plan iCloud with money from iTunes?

• How cancel a monthly fee for storage space I need is no longer? Does anyone know how to do this?

  How cancel a monthly fee for storage space I need is no longer? Does anyone know how to do this?

  You can change the storage volume by selecting a new plan directly from your iPhone, iPad, iPod, Mac or PC (for example, a plan of 5 GB to replace a 200 GB plan). The downgrade will take effect after the end of your monthly or annual subscription in progress.

  iOS

  
  

  1. If you use the iOS 8 or laters, go to settings > iCloud > storage. If you are using an older version of iOS, go to settings > iCloud > storage and backup.
  2. Click Change storage Plan.
  3. Press Downgrade Options and enter your Apple ID.
  4. Choose a different plan to use when the expiration of your current storage plan.
  5. Tap done.

  
  OS X

  
  

  1. Choose the Apple menu > System Preferences, and then click iCloud.
  2. Click on manage in the lower corner on the right.
  3. In the upper right corner, click Change storage Plan.
  4. Click Options to Downgrade.
  5. Enter your Apple ID password, then click on manage.
  6. Choose a different plan to use when the expiration of your current storage plan.
  7. Click done.

• setting up multiple files for storage on the sidebar in mail

  How can I configure multiple files storage on the sidebar in mail

  Mail/Mailbox/new mailbox. Generally better to create the mailbox on my Mac when it is used for storage.

• How to use the 2nd hard drive internal for storage?

  Hi, I am a newbie in all of this. I would use the 2nd internal hard drive of our mac mini server (end 2012) for storage (in fact, I'll things rsync from a remote server to here. but this is not the point here.). The thing is, I don't know how to access the 2nd internal hard drive and where to start. I did all of the following commands in the Terminal, but I don't really know what they mean, and what can I do with this information. I've been Googling but most are guides on how to install a 2nd hard drive etc. I hope that the information below is enough for someone to give me advice please?

  Thank you!

  

  

  

  That shows disk utility?

• Hi, my places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this. Visited links are is more changing color.

  Hello
  My places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this.
  Suddenly the visited links don't change is no longer the font color, that I prepare for an exam, I need visited issues to change color, to follow up on issues that I ended. But if I delete a few days of history, then again once, most visited links change color and then it stops, it seems that something is getting full and not able to accommodate more? Why my visited links don't change color after a number of visits? I would like to make a back up of the file places.sqlite. So I tried everything to remove the profile, uninstalling reinstalling, creating a new profile, and then copy paste places.sqlite etc, but as mentioned after a few visits, visited links is no longer change color, if I delete a few days in history and then a few visits is again change color and then stop again, so what should I increase so that my quota of visited links is increased , I also tried tweaking about: config and there has been no result. Although I was not really convinced that _pages growing brower.history_max (don't remember the name, but I'm sure you get the idea) will help.
  Seems that while my visited links change color, quota is met and only if I delete the history of a few days will I get some links most visited to change color. Can someone enlighten us? As mentioned that my places.sqlite file size is 30 720 KB so I think maybe this has something to do with it? Would be very grateful if someone could help me. Thank you.

  Sorry it is not looking good.

  1. Unlike bookmarks history is not saved in Firefox.
  2. There is a possibility using Windows.
  3. Sync is not expected to back up things until the synchronization server
  4. If places.sqlite does not sort itself you may have to re-create remove it. You will lose your history, but can still access indirectly IF you have saved a copy of the appropriate
  5. Different databases to try to create new profiles
  1. History
     is rather less robust than bookmarks, you should deliberately somehow return it upward, but it's too late now
  2. Earlier versions of Windows
     This is really the last chance. Make sure you have some places.sqlite you saved. Always before and after any attempt to restore the backup. Windows must be able to provide a previous version. One of these versions may be usable as is; or can be used after a repair with housekeeping. Of course, this is not the latest version but it should help.
  3. Sync is not a server backup service.
     Sync is intended to save on another device, no backup is the fact that the second device then contains synchronized information. IIRC Sync development ceased, and the replacement when available may include a server backup option.
  4. Recreate the database of bookmarks (including history)
     Unfortunately, recess can only use saved bookmarks, there is no saved history to use. Once the database is re-created, it will continue to store the history but it loses the existing history. This time take steps to save on a regular basis.
     • The backup profile or at least the places.sqlite in this
       Backup and restore Firefox profiles information
       https://addons.Mozilla.org/en-us/Firefox/addon/FEBE/
     • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox#Rebuild_Places_database
  5. Use the new profiles for database testing.
  
  To simplify comparison of the results of the database different files create one or more new additional profiles. Then try to smash the places.sqlite file into the test profile with any other places.sqlite, you want to try. Allows you to directly compare the databases, without seeking to use sync and without changing the Firefox profile work unnecessarily. You can keep a reference profile of studies with the best of the profiles of any shows results of history; According to the best recreated or corrupted database is.
  • Use the Profile Manager to create and delete profiles Firefox
  • CARE, do not rename or delete profiles created once or use anything other than empty folders when they are created. Don't nest in the other profiles. (At least until you know exactly how it behaves - post back if you never consider such actions)

• What is the configuration of the maximum ram for a 2007 iMac 21,5 "

  What is the configuration of the maximum ram for a 2007 iMac 21,5 "

  There is no such thing as a 2007 21.5-inch iMac; the 2007 iMac is all 20 or 24 inches. Click here and search for your model; the page it will say.

  (141476)

• What is HD-maximum capacity for Satellite Pro A40?

  Hello together,

  I got a (PSA45E) Satellite Pro A40 and now I need a new hard drive.
  My question is now, what is the maximum capacity for a hd you can plug in and are very by the BIOS?

  Thanks in advance.

  Doc

  Hello

  I think this old laptop HARD drive with IDE interface, so I think the upgrade up to 120 GB should be possible. I think that 80 or 100 GB should be enough for this good old classic.

  I hope you aren't the guy who wants to have 500 GB. :)