Similar Questions

• "Filtering exceeds the maximum time" error in the crawl log

  A track log contained the following error. Is this error related to the Configuration of robot setting "Crawler Timeout (seconds) threshold? (Mine is set * 30 * seconds.)
  
  "Filtering exceeds the maximum time * 108 * seconds; killed process. dating status 1 without any error message.

  No, they are not related. Filtering is the process of conversion to the format (Word, PDF) documents into searchable text. If it exceeded the 108 seconds the process had almost certainly hanged, most likely indicating a corrupt file.

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• 3000 N200 starts the first time, but he will start for the third time!

  Hello

  My old N200 of 2 years has recently decided not to initialize the first time. Usually it starts the third time lucky this changes in the cold outdoors when it may take 7 or 8 will but or does not start later.  I think it started after that I left the machine running on battery power a day forgotten and the next day it took a few goes to start after plugging it load up.

  When it wont start the fan lights just like the Windows screen comes on and after a few seconds, it dies as if I had pressed and held down the power button as you would to turn off if the system was no answer, and he makes the same noise. When it finally starts the fan is silent!

  This one worked!

  Thank you very much

  I don't know that I have never done this? Certainly not intentionally. Well, I seem to have solved the problem by resetting the CMOS as described elsewhere in the forum. Machine boots first time every time now, so he must have had something to do with it. Or I also during the same operation was released and returned to the my 2 GB memory add on and I think that may be related to poor startup performance if it is not inserted correctly.

  What a relief and after being where I bought they had no idea and wanted to send it away etc etc and I pay £11 a month for such a service, I had a lot more less than an hour on this forum

  Thanks for the reply

• Shorten the time allotted after the start

  Is there a way to shorten the period of time once welcomed period starts?

  Hello

  The time limit set in the Parental control is not editable once the time has begun. Log in with the administrator account and change the time runs out, when the time is unlocked.

• Everytime I open Photoshop CS2, it starts as if it were the first time.  All the settings are default and it asks me to register even though I already have.  How do I save my settings and keep his memory?

  Everytime I open Photoshop CS2, it starts as if it were the first time.  All the settings are default and it asks me to register even though I already have.  How do I save my settings and keep his memory?

  Right-click on the exe to PS file and choose Run as administrator. I think you choose the option "check mail", it will not ask again.

• I tried several times to install the updated Acrobat 11.0.14 version.  It downloads, verifies and starts to install, but never finished.  The installation program displays a 'wheel' in rotation that can go for hours.  I finally force leave the insta

  I tried several times to install the updated Acrobat 11.0.14 version.  It downloads, verifies and starts to install, but never finished.  The installation program displays a 'wheel' in rotation that can go for hours.  I finally force quit the installation program.  The update does ' t happen. I still have the 11.0.13 version.  How can I make this work?

  Mac https://forums.adobe.com/message/5470608 spinning wheel

  -Similar to Windows https://forums.adobe.com/message/5853430

• How do I export a large collection at various times and have the renumbering be sequential? So, start by importing 1-499 rename, then have the next export pick up 500-599 for example. Thank you!

  How do I export a large collection at various times and have the renumbering be sequential? So, start by importing 1-499 rename, then have the next export pick up 500-599 for example. Thank you!

  To my knowledge there is not anyway, unless start you numbering at 500 the number. It is an option in the export dialog window.

  

• Auto fill time system for the start/end OTL book times

  Hello
  
  Y at - it a default option the time-card output once at the time of the system.
  Say on the card, a default button is the start time and end-time(and have these as read-only).
  
  Is this possible in OTL with preferences?
  
  The customer wants-away with the score clocks all together. If such a feature is available in OTL.
  
  TIA,
  VB
  
  Published by: VB on June 13, 2011 17:39

  VB,

  You can not add logic in layouts automatically fill the time based on the clock. You will have to depend on a custom process to do.

  Less than entry delay is also day, not week. Look at the configuration of your test employee preferences.

  -Shiv

• Need help to calculate the start and end time and place the result in a term like text box

  I did a search on the forum for calculating start and end time and found the code depending on which I am using as a formcalc on the duration field.
  ==============================================================
  Form1. Page1.duration::calculate - (FormCalc, client)
  
  If (HasValue (StartTime) and HasValue (EndTime)) then
  industrial var = Time2Num (StartTime.formattedValue, "h: mm A")
  var = Time2Num out_ (EndTime.formattedValue, "h: mm A")
  If (IN2 > = out_) then
  xfa.host.messageBox ("start time cannot be greater than or equal to the end time.")
  $.rawValue = null
  on the other
  var out_ - IN2 = diff
  $.rawValue = diff/3600000
  endif
  on the other
  $.rawValue = null
  endif
  =============================================================
  
  Then, when I enter for example from 15:30, an hour of beginning and end of 04:00
  
  The duration field will say 0.5
  
  How can I get my form to say 30 minutes instead of placing a decimal?
  
  Secondly, how can I use field models LC where the employee can just type 330 or 03:30 and it automatically based on the computer's clock on time to start 15:30?
  
  Any help will be greatly appreciated.  Thank you.

  Attached is the form for display:

  https://Acrobat.com/#d=f1kxh5qjuow5ujyZduF8OQ

  To view the results in a regular time format, you can use:

  $.rawValue = Num2Time (diff/3600000, "HH: mm")

  For a flexible time entry check this example.

  http://thelivecycle.blogspot.com/2011/05/flexible-Eingabe-von-Daten-und-Zeiten.html

• Starting the server takes a long time due to the storage of JMS persistence files

  Hello
  
  We use WebLogic 9.2 on a windows machine.
  Recently, we have improved our request to work with JMS.
  We are on 2 different servers in a cluster using 2 JMS servers and works with distributed destinations.
  We use file storage as our persistence store.
  
  Recently, we found boot server takes a long time because of the actions that are performed on the storage of files.
  Analysis of this problem, we have seen that the size of the file is of ~ 2 GB.
  We understand that the file size does not fear (unless it is compacted manually), and its size matches the largest number ever of pending messages in the queues (as a mark of high tide).
  We shot also store debugging, using weblogic. Debug.DebugStoreIOPhysical and we saw a lot of recovery after newspapers file storage is open.
  We have checked and checked our JMS transactions are completed successfully. We also checked that the current messages and number of courses is 0.
  We stopped the server gracefully, check that there are no messages pending.
  However, several times takes start server ~ 30 minutes due to heavy work on the persistence store.
  Compaction or remove storage of files eliminates the delay.
  However, we want to avoid the manual operations whenever we want to start the server.
  
  Please share your ideas.
  
  Thank you
  Itsik

  The only suggestions I have off the top of my head are:

  * Ensure (1) the host system has at least 2 GB (the store file size) memory physics in addition to the memory used by the current process, and (2) the host system is not rebooted between each restart WebLogic. If you ensure that both of these, then the operating system puts implicitly cached content of the file of the store in memory even between boots - when WebLogic starts subsequently storing files, the o/s should be the content of the file much more quickly.

  * You can move to a JDBC store. Runtime JDBC store performance are lower, but since you have generally has only a small amount of records to retrieve, startup performance should be higher in this case.

  * Not that it helps your case, but it happens that we have significant performance improvements of starting process for a future version (if all goes well a near future release).

  Tom

• To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

  After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help

  You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• I lost my WiFi signal after having placed a time Capsule in the system. Now the Airport Extreme will not recognize the system. Any ideas?

  Any ideas on why my Airport Extreme will not recognize the system after the integration of the time Capsule in my system? Continues to have a flashing yellow light after trying all suggestions of technicians from the Apple Store and Internet provider.

  Since we don't know all what has been tried, we will have to start from the beginning if you don't mind.

  What exact models are your AirPort Extreme and Time Capsule? What is the brand and model of your modem Internet? I'll assume that Extreme is your "main" router and is directly connected to the modem by Ethernet... correct?

  Do you have the Time Capsule (TC) connected to the extreme, by wire or wireless? What is your goal for the TC? In other words, will not be used to extend the reach of the extreme wireless?

• Real-time display at the high frequency of data acquisition with continuous recording

  Hi all

  I encountered a problem and you need help.

  I collect tensions and corresponding currents via a card PCI-6221. While acquiriing data, I would like to see the values on a XY graph, so that I can also check current vs only voltage/current / time. In addition, data should be recorded on the acquisition.

  First, I create hannels to analog input with the Virutal DAQmx channel create, then I set the sampling frequency and the mode and begin the tasks. The DAQmx.Read is placed in a while loop. Because of the high noise to signal, I want to average for example every 200 points of the current and acquired for this draw versus the average acquisition time or average voltage. The recording of the data should also appear in the while loop.

  The first thing, I thought, was to run in continuous Mode data acquisition and utilization for example 10 k s/s sampling frequency. The DAQmx.Read is set to 1 D Wfm N Chan N Samp (there are 4 channels in total) and the number of samples per channel for example is 1000 to avoid the errors/subscribe for more of the buffer. Each of these packages of 1000 samples should be separatet (I use Index Array at the moment). After gaining separate waveforms out of table 1 d of waveforms, I extracted the value of Y to get items of waveform. The error that results must then be treated to get average values.

  But how to get these averages without delaying my code?

  My idea/concern is this: I've read 1000 samples after about 0.1 s. These then are divded into single waveforms, time information are subtracted, a sort of loop to sprawl is used (I don't know how this exactly), the data are transferred to a XY Chart and saved to a .dat file. After all that's happened (I hope I understood correctly the flow of data within a while loop), the code in the while loop again then 1000 samples read and are processed.

  But if the treatment was too long the DAQmx.Read runs too late and cycle to cycle, reading buffer behind the generation of data on the card PCI-6221.

  This concern is reasonable? And how can I get around this? Does anyone know a way to average and save the data?

  I mean, the first thing that I would consider increasing the number of samples per channel, but this also increases the duration of the data processing.

  The other question is on the calendar. If I understand correctly, the timestamp is generated once when the task starts (with the DAQmxStartTask) and the time difference betweeen the datapoints is then computed by 1 divded by the sampling frequency. However, if the treatment takes considerable time, how can I make sure, that this error does not accumulate?

  I'm sorry for the long plain text!

  You can find my attached example-vi(only to show roughly what I was thinking, I know there are two averaging-functions and the rate are not correctly set now).

  Best wishes and thank you in advance,

  MR. KSE

  PS: I should add: imagine the acquisition of data running on a really old and slow PC, for example a Pentium III.

  PPS: I do not know why, but I can't reach my vi...

  
  

• Impossible to reach on the Adobe servers, please check the firewall settings and try again

  Impossible to reach on the Adobe servers, please check the firewall settings and try again

  Where download photoshop cc trail is said ^^

  I tried to add adobe through firewall

  I tried activation adobe inbound rules

  I tried to restart my pc

  Nothing works please help

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html