May not exceed the sign-in after re-installing MS-money

Similar Questions

• does not restore the system files after clean install

  When I click on the HARD drive which has my backup file, it says that "windows could not find and backup sets on e:\.» Please selection elsewhere. "When I click on"Refresh"this disc shows up... again.  When I look at the contents of the disc there is a file named: N360_BACKUP, however it will not recognize it, so, not restore it.

  Is there another way to restore my files? I was really counting on this form of backup, and if I can't restore it, I lost all my emails, email addresses, contacts and favorites for the past two years, no to the meniton photos, music, etc.

  I have looked at similar positions here and tried the suggestions in them with no luck.

  Hello Terryjoe,

  Thank you for your message.  The N360_Backup referred to Norton 360.  We will be more than happy to help you to restore your data, please answer a few questions first well.  What version of Norton 360 backup/restore are you using?  Below are the steps for version 2:

  1. go to the folder C:\Program Files\Norton 360\Engine\3.x.x.x, you will find a tool Arestore.exe (3.x.x.x allows 3.0.0.134 or 3.0.0.135 depending on your version)

  2. navigate to the folder C:\Program Files\Norton 360\MUI\3.x.x.x\09\01, you will find an Arestore.loc file ((3.x.x.x allows 3.0.0.134 or 3.0.0.135 depending on your version)
     
  3. copy Arestore.exe and Arestore.loc to the root directory where you saved the backup created using Norton 360 (the long file aside the N360_BACKUP) and run Arestore.exe.  It will look in the N360_BACKUP folder to your backup set.

  In your case, you must copy Arestore.exe and Arestore.loc to the external hard drive where you have the file N360_BACKUP. Double-click on Arestore.exe, it will work and restore all your saved data.

  If this does not work, go to the next series of steps...

  4. If she fails to find your backup set, you must delete the corrupted catalog file.

  To delete a catalog file corrupted, go to the N360_BACKUP folder.  There should be a folder with a long alphanumeric name, open that folder.  You can see a file named backup.@db.  It is the catalog file.  You must move this file in this directory (put on your desktop for added security).

  5. Once backup.@db has been deleted, go back and try to run Arestore.exe from the root directory.

  Note: This process may take some time.

  http://community.Norton.com/Norton/board/message?board.ID=Norton_360&message.ID=14505

  See you soon

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• Photo download file may not exceed 4 MB

  I need to upload a picture of my 'Images' file to be used as an image of portfolio for a job search site.  The image file may not exceed 4 MB otherwise the image will not download on their Web site.  I tried to resize the photo but can only resize in... inch, pixels or as a percentage.  I tried all of the 3 types of methods of resizing and still can't download my picture.  How can ensure me that my picture does not exceed the 4 MB limit?

  Please notify.  Thank you.

  E-mail address is removed from the privacy *.

  The following freeware resizer might be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Prish Image Resizer
  http://www.powerhourgame.com/windows_vista_image_resizer_powertoy_prish_image_resizer.htm
  (left click the "Download now" button... the name of the file to ")
  downloading is: "PrishImageResizer.msi"... Click with the left button to install)

  Once the utility is installed... all you have to do is right
  Click on a photo and choose... Prish Resizer.

  You can enter a custom size or just simply
  left click "Resize to 1024" which should be enough for
  your task and the size of the file will be greatly reduced.

  The resized image will appear in the folder with the original
  in a new folder named Resized.

  Good luck...

• Hello. I bought Lightroom, paid license 1 year view, did not have serial. E number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hello. I bought Lightroom, paid license 1 year view, did not have serial. And number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hi Sergior96769872,

  I saw your Adobe ID (email address), you used to post on the forums, and I see an active subscription on it.

  Please see Help below links: { make sure you use the same Adobe ID (email address) that you used to purchase the subscription }

  Connect and disconnect activate Cloud Creative applications

  Adobe Creative Cloud apps back in test mode after 2015 set CC to update

  * NOTE: Make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it can just disable the firewall for a while and then log off and log on creative application of cloud and check.

  If it still gives you an error of the trial, then please refer to the troubleshooting listed below:

  If you are using MAC:

  1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (it will open the folder of the user's library.)

  3. browse to the Application Support > Adobe > trash OOBE folder and folder AAM Updater

  4 - CUT any installed security software with firewall system.

  5 - go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  6 - restart the cloud creative app and connect

  
  

  If you use the WINDOW:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  4 - raise the cloud creative app and connect

  Let us know if that helps.

• A problem with cc libraries "the file does not exist, you may not, or the file may be in use by another application".

  I'm working on our catalogue on INDesign CC 2015, I have a links to my libraries, I worked every day without any problem. I work on a Mac and Win system, I put the file on my disk hard or on files of cc.

  2 days ago, I opened the file and as a result with any missed links, when I tried to re-link on my library the program shown Indesign files missed this message "the file does not exist, you may not, or the file may be in use by another application", I contacted Italian cat Adobe they suggested me to change the name of the file I did but nothing happened, they suggested to create a new owner of the computer, but it did not work because I work within a team and the file is opened to others of collaboration. I have 333 links so what I shell do? Please help me, I have to finish this work, we need print it out as soon as possible.

  I had this problem after an Indesign file that we've been working on the opening of my colleague. She has made a few changes and then when I went back to work on the file of the library of all the links were broken and I had him "you don't have to leave."

  I've corrected the problems by opening Illustrator and rename the library. InDesign revived and everything from the library was connected properly.

• WARNING: Pellets of pga_aggregate_target 96 may not exceed memory_tar

  Hi all
  
  11.2.0.1
  OEL 6.4
  
  I am tracking our PROD alerts log and I can't occurrence of warnings:

  WARNING: pellets of pga_aggregate_target 96 may not exceed memory_target (101) - sga_target (0) or min_sga (6)

  I ignore this warning only? Does affect the performance?
  
  
  Thank you
  
  zxy

  Here's your on IE 6464 M 6.1 G memory_target and your pga_aggregate_target = 6174015488 which is about 6.1 G and your sga_max_target = 6.4 GB is.

  According to oracle documentation

  Make sure settings MEMORY_TARGET/MEMORY_MAX_TARGET are on at least the sum of SGA_MAX_SIZE/SGA_TARGET and the parameter PGA_AGGREGATE_TARGET

  Your memory_target must therefore more than sga_max_size + pga_aggregate_target

  That's why your target memory should be more than 6.4 + 6.1 = 12.5 G

  For example:

  ALTER system set memory_max_target = 13G scope = spfile;
  ALTER system set memory_target = 13g scope = spfile

  and restart the DB.

  Hope this can help you :)

  Published: sga_max_target to sga_max_size

• @ sign is the captial lock + 2 How can I change this - also can not find the sign of the pound sterling

  I had my computer updated and the keyboard acts weird, I know that this can happen, but I can't find where to change it.
  The sign @ is capital lock + 2 and I can not find the sign of the pound sterling.  The dates where the American MM/DD/YY, but I managed to change it, but can not find where to change the keys on the keyboard.  Help would be appreciated.
  Thank you
  Jenny

  Hi JennyBrightwell,

  1. how you accessed the pound sign before on the computer?

  2. where you using a third party program for characters to work?

  3. What keyboard layout you have defined on the computer?

  4. What is the serial number and model of the keyboard?

  5. what you up to date on the computer?

  I suggest that you check if the problem persists when using on screen keyboard on the computer and the post with the result back.

  Keyboard on the screen overview

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/osk_overview.mspx?mfr=true

  Using the character map

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_charmap.mspx?mfr=true

• Some of function boxes are elongated and may not reach the OK box

  original title: Windows Vista - Control Panel customization to enlarge the font size.  Some of function boxes are elongated and may not reach the OK box

  Using Windows Vista. I used the customization Panel control to enlarge the font size.  I discovered that some boxes, like Adobe Reader Print and function, in effect, the Personaization (to reduce the font size to original size) require a click OK. But the box frame with large font size, is elongated until I can't get the OK.  How to get to the OK or reduce the size of the police without the OK?

  Simply press enter instead of OK.

• On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "Please help

  On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "This message appears for firefox, AVG, Windows live messenger, windows MediaPlayer etc.

  I can access my documents, Panel etc. and everything is there, but it won't let me not get access to the programs.

  Also when I go to click on itunes and open office it happens "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel.

  Given that I was able to access control panel, I was able to create a new user and use it for now to send this message and all programs have worked on it and I was able to check for the presence of viruses on the Avg on this and everything was clear.

  Could you please explain whats wrong and tell me how to fix this please: D thanks

  Hello
   
  1. don't you make changes before the show?
  2. is the computer is joined to the domain controller?
   
  You can not start any application on a client computer that is joined to the domain controller. When you try to start this type of application, you receive an error message similar to the following:
  "Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  This can also occur if the user account is damaged. If the computer is not connected to a domain controller, try the following steps.
  1. connect to another user account and create a new user account to fix the damaged user account.
  For more information about creating a new user account and the fixing corrupt user account, visit this link: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
   
  Previous post the results in more detail, so that we can help you further.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.

  You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.  They will have to copy the files in the folder to make changes and then copy a review of back in.  Locally and on the network

  Hello

  1. In Windows Explorer, right-click the file or folder you want to work with.

  2. In the context menu, select properties and then in the Properties dialog box, click the Security tab.

  3. In the name list box, select the user, contact, computer, or group to which you want to display permissions. If the permissions are grayed out, this means that the permissions are inherited from a parent object.

  https://msdn.Microsoft.com/en-us/library/bb727008.aspx?f=255&MSPPError=-2147217396

• Windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu

  Hello world

  I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.
  I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.

  I would be very grateful if you could help me

  Hello

  I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know the results. We will be happy to help you further.

• I can not download the trial version after effects CC show me a message in the page: we are experiencing some problems, please try again later. If the problem persists, contact customer support.

  I can not download the trial version after effects CC show me a message in the page: we are experiencing some problems, please try again later. If the problem persists, contact customer support.

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  Maybe it's a false error that hides the real problem... a 32-bit computer

  You MUST have a 64-bit computer and operating system... What is your computer?

  -http://windows.microsoft.com/en-AU/windows7/find-out-32-or-64-bit

  -Programs are supposed TO not view or download if they are not installed on your computer

  -http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• I do not see the sign of the option

  I have download the adobe reader X software and I do not see the sign of the option. Where can I find it. It is not next to the tools

  Try the English version of Adobe Reader X.

• I can't get Photoshop and Lightroom to download keep may not find the secure server?

  I can't get Photoshop and Lightroom to download keep may not find the secure server?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777