(Maybe stupid) Question about ASDM configured PIX PIX VPN

Similar Questions

• stupid question about UAC

  OK, it's a REALLY stupid question about UAC.

  I have several icons on my desktop. Some of them are games that must be run as administrator in XP compatibility mode.

  I rarely accidentally tried to open the icon, particularly if you use the keyboard to choose what I want.

  Is there a reason if I accidentally open a game that pushes me in height DO NOT hit 'Cancel' if I didn't intend to play the game at the moment, but trying to open something else? Something like a process being left in suspense, memory leaks, or any other reason why I can't Abort to launch the application to the UAC prompt?

  Hey, Slick,

  Clicking Cancel will prevent the running total process if you do not have to worry about the still ongoing services for memory leaks or game, etc..
  I hope this helps.

• REALLY stupid question about virtual machines and disks of cancellations.

  I'm a bit hesitant to ask this question because it might make me look stupid, but...

  When I'm done using Virtual PC and a virtual machine running Windows XP Pro with Vista 64 Home Premium because the host os, often I did not any significant changes to the hard disk of the virtual machine.

  What I save gets saved to a network share on my server for files and printing from Win98 and saved on a flash drive.

  Assuming that I do no configuration changes or anything else I want to keep, is there a reason barely stopping properly when I 'cancellations discs' enabled?

  Any reason, I can not save time by pressing the 'X' button and choose 'disable and remove changes '?

  I am aware of patches, but took me to inform me of the patches, and I can get patches when it's convenient for me and I always validate changes when I install the patches. I'm not using it for anything other than my classes of the school of the evening for the time being, so it is not much of a value of protection on the virtual machine, and I used to write papers on the host operating system. I just use the virtual machine to play with the admin tools in an environment where I can easily fix it a massive screw-up without spending hours to reinstall Windows.

  Hey SlickRCBD,.

  Not a stupid question at all! :)

  It's very well hit the X when you have activated the disks of cancellations. And corruption or problems with the active virtual machine will be resolved when using the drive to cancel it.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Question about ASDM by VPN

  Hello again

  I configured ASA 5510 management through the inside interface.  When I'm in the office connected to the LAN I have no problem to launch ASDM.  However, when I'm away from the office and I connect via the Cisco SSL VPN Service I can't manage the ASA5510 even if I can access all the shared resources on the network.

  When I try to run ASDM when connected via VPN, I get the error message...  "Unable to launch the x.x.x.x Device Manager" (inside the ASA5510 address).

  The danger would be if I've already enabled the management through the outside interface?

  Ed

  Hello Edward,.

  Please change the pool to a different subnet of the interface of the ASA... Who will make the ASA a little crazy about communications between the local pool and the local subnet.

  You can add the following command example

  management-access inside

  Kind regards

  Note all useful posts

  Julio

• A stupid question about backup...?

  I have my production Oracle running on HP - UX database.
  I don't have any other HPUX box to test my recovery to ensure that backups are recoverable.
  Maybe this is a stupid question. Is it possible to restore the back upward in HP - UX on Enterprise Linux?
  Oracle 10g R2
  Thank you
  Smith

  Is it possible to restore the back upward in HP - UX on Enterprise Linux?

  N °

• a stupid question about the string conversion error

  I learn generic

  well generic allows setting the data type that you add to the fields of the object, right?

  I made a simple example

  class generic < String >

  {

  The name of the string;

  void set (String name)

  {myIdName = name ;}

  String get() {return myIdName ;}

  }

  class using {}

  Public Shared Sub main (String [] args)

  {

  generic < String > gn = new

  (generics) < String >;

  GN. Set (90);

  System.out.println ("name entered is:" + gn.get ());

  }

  }

  now the line

  GN. Set (90);

  I know that I send a string to the value method, but I wanted to see the error that comes when I send the argument of type other than a string and sent 90 to set method (without quotes)

  the error that slammed me is

  method defined in the class generic < String > cannot be applied to the given types

  required: java.lang.String

  found: int

  reason: int real argument cannot be converted to a java.lang.String by method invocation conversion

  corresponding to a variable of type String: String extends the object declared in the class generic

  OK here is my stupid question

  I know that int cannot be converted to a string and put 90 quotes will correct the error

  What intrigued me is the last line

  "Chain extends object declared in the class generic.

  
  

  I know that everything is under the object class

  that means that means line... ??

  thnq

  What intrigued me is the last line

  "Chain extends object declared in the class generic.

  
  

  I know that everything is under the object class

  that means that means line... ??

  Which refers to the class definition you provided:

  generic class

  You "stated" in your 'generic' class a 'collar' stretching ' the object '. It reads as if it said "String declared in the class generic.

  See "Generic Types" in the Java Tutotial

  http://docs.Oracle.com/javase/tutorial/Java/generics/types.html

  Search for the word 'object' and you'll see that word highlighted in the world. Although it appears highlighted read this line:

  As you can see, all instances of the object are replaced by T. A variable of type can be any non-primitive type you specify: any type of class, any interface, any type of table or even another variable of type.

  On this page, you will see this:

  A generic class is defined with the following format:

  class name { /* ... */ }
  

  Where each one is read as: T1 extends object ', "T2 extends object", etc.

  When you said this:

  generic class

  You replaced "T1 extends object" with "String extends object".

• New in AS3: stupid question about event listeners...

  Hi all

  I am a newbie in Flash and have a question about event listeners. I have a site I'm developing with a movie clip navigation which is composed of several buttons. What is the right way to write the event listener?

  Here's a sample of what I have:

  I have a clip called 'buttons_mc' that contains the symbols of individual button with various names such as "btn_history". So far, I don't have an instance name for the clip of the film itself.

  My event listener:

  btn_history.addEventListener (MouseEvent.CLICK, history);

  I have to put something before the "btn_history" which refers to the video? I get this error message:

  1120: access of undefined property btn_history.

  Thank you!!!

  Julia

  Yes, it is preferable to have at least one layer dedicated to actionscript.  I often use a couple... one for code shared (functions and variables) and a level of the frame code (stop(), etc.).

  The code must be in a scenario where the button is directly accessible.  If your button is accessible in frame 1, which means that it does not animate in place such that it is not really intended to be used until you get somewhere near the bottom of the timeline, then you can target the button of the timeline that holds the buttons_mc movieclip.  So as I described earlier, if you give this movieclip an instance name of "buttons", and then to assign a code to the button on the inside you should use...

  Buttons.btn_history.addEventListener (MouseEvent.CLICK, history);

  But if the button exists somewhere down the timeline inside the buttons_mc due to the animation of the button, which means that there is more than one key image for the button, then you must place the code that you have initially shown in the last keyframe to the bottom of the timeline where he set the button in place.

  .

• Stupid question about compatibility

  I would be happy to search the forum for inDesign to discssions on compatibility with other editions, but it seems that it is impossible. Where this stupid question.

  Problem: a uniform translation ends me back-saved files in InDesign CS, which I created originally, but I can't open them.

  This that I have to spend $500 on an upgrade so I can open it or is there a way they can back - save it so I can open it?

  Thank you

  I think that I get it now. I doubt that the files have been saved as files InDesign CS. As I said before, it is impossible to back - save as InDesign files. Only InDesign X can save to a file, InDesign X. very probably, the provider is you open files in a later version of InDesign and save as native file of this version, InDesign 4, 5 or 6, you cannot open.

  You have three options:

  1. You are upgrading InDesign to be compatible with the version of the provider.
  2. Only translated text files, then you replace the text in your files.
  3. Having the export INX since InDesign 4 provider. If they use later to edit it can be a loss of hassle and risks of formatting.

• question about shun to pix

  Is it possible to have a user account specific on the sensor to connect and send commands on a PIX of shun, or are you limited to a generic connection with activate password?

  Thank you

  1) go to web configuration GUI on the sensor.

  (2) select the tab "configuration".

  (3) select 'blocking'-> 'logical devices.

  4. Enter username, password and enable password in the appropriate fields.

  5) go to "blocking devices", adds PIX as a blocking device.

  It should work. I do something similar through the IDSMC, but the configuration will be reflected on the individual sensors I described above. (Assume that you are on code sensor 4.x and the user name is valid for the PIX in question).

  I hope this helps.

  Kind regards

  Chad

• A question about the old Pix 515

  Hi Experts.

  My client needs additional interfaces of FE and do not want to migrate the chassis 515E.

  Can the data sheet of the former 515 Pix no longer available due to the declaration of the EOS, you please confirm that the Pix 515 supports 1FE - PIX and PIX - 4FE cards before ordering one of them?

  Thank you

  The 515 supports 4 interface cards. Make sure they are running a UR pix license if - 515R takes only supported 3 interfaces.

• Questions about the configuration of the cache for use with partitioned off-lot...

  Once more, I give it a try to see if we can make use of the new partitioned (split) off-heap storage and are having problems with the configuration of the cache (including configuration files).
  
  The problems that I had, it seems that < high > units should be specified for the entire cluster (or perhaps for a node? not sure yet!) while < original-size > & < size > is specified by partition. Is this correct? That's the way it was intended (for me it would have seemed more logical to also specify < high-units > per partition since I guess overflow checking and expulsion is made by partition)? The way I read the documentation, it seems that all three should be per partition if < partitioned > true < / partitioned > is specified.
  If I value < > 1 mb high-units (as i belive I should if it was per partition) I get the impression that I posted in a previous question (a message to info on some missing index data, then the crash of nodes in cluster with some of out of memory error).
  
  / Magnus
  

  <?xml version="1.0"?>
  <!DOCTYPE cache-config SYSTEM "cache-config.dtd">
  
  <cache-config>
      <caching-scheme-mapping>
          <cache-mapping>
              <cache-name>ObjCache</cache-name>
              <scheme-name>off-heap-near</scheme-name>
              <init-params>
                  <init-param>
                      <param-name>front-size</param-name>
                      <param-value>200000</param-value>
                  </init-param>
              </init-params>
          </cache-mapping>
      </caching-scheme-mapping>
  
      <caching-schemes>
          <near-scheme>
              <scheme-name>off-heap-near</scheme-name>
              <front-scheme>
                  <local-scheme>
                      <high-units>{front-size}</high-units>
                  </local-scheme>
              </front-scheme>
              <back-scheme>
                  <distributed-scheme>
                      <service-name>PartitionedOffHeap</service-name>
                      <backup-count>1</backup-count>
                      <thread-count>4</thread-count>
                      <partition-count>127</partition-count>
                      <backing-map-scheme>
                                <partitioned>true</partitioned>
                            <external-scheme>
                                  <nio-memory-manager>
                                     <initial-size>1m</initial-size> <!-- PER PARTITION?! -->
                                     <maximum-size>1m</maximum-size> <!-- PER PARTITION?! -->
                                  </nio-memory-manager>
                                  <unit-calculator>BINARY</unit-calculator>
                                  <high-units>127m</high-units> <!-- PER PARTITION/NODE/CLUSTER?????? -->
                           </external-scheme>
                      </backing-map-scheme>
                      <backup-storage>
                      <!-- PARTITIONED BY DEFAULT?! -->
                          <type>off-heap</type>     
                      <initial-size>1m</initial-size> <!-- PER PARTITION?! -->
                      <maximum-size>1m</maximum-size> <!-- PER PARTITION?! -->
                      </backup-storage>
                      <autostart>true</autostart>
                  </distributed-scheme>
              </back-scheme>
              <autostart>true</autostart>
          </near-scheme>
      </caching-schemes>
  </cache-config>

  Sorry, my description is very confusing. High units is by cache. What I was trying to say, is that cache mapping can train additional units high to affect the memory required by the node. Since multiple caches can map to the same pattern, especially if you use wildcards in the mapping, you must consider the total number of hidden units of high times. It is true or not caches use different services.

  You are also right about high units, applying to the partitioned support cards. You could have easily expulsion are happening as you describe. We must take another look at the configuration because it is too easy to make a mistake.

  As expected, the allocation of card support splitting is lazy to avoid the problem you described. The worst case situation, I was trying to explain can occur if you have caused all buffers to be allocated based on the data before all other nodes could take some of the partitions.

  Kind regards

  David

• HP Officejet Pro 8500 A909a USB 3 questions about the configuration of the network - port USB3 problem

  Fujitsu Windows 7 laptop (all USB2)

  used the full software and installed a printer HP Officejet Pro 8500 A909a Series as a network printer.

  The printer installed fine and don't have USB connection

  All the software and scanning twain installed, so I was able to scan the copy etc.

  I could browse and choose my PC from the front panel of the printer

  However, it was Tuesday confirmed to a friend that their printer would work on a new laptop - bought the laptop

  Fujitsu - but more recent model with 3 USB ports

  I have install and then used the same FULL configured driver to be installed (V14)

  selected as a network printer and then, during the installation, I get an error hardware error USB and USB drivers

  All the USB works, that I've used - BUT the printer is networked and no USB used

  tried to download the driver and install it-exactly the same question

  SO I configure using the devices and printers 'add printer' network and installed

  I can print OK

  BUT no analysis facilities

  and on the façade - cannot see the new PC to scan to

  The only real difference, is that this PC has USB3 and only mine has USB2

  DO not know why on a network installation USB even when searching for

  It's a problem because Drivet package not has not been updated for USB3 - y at - it a patch?

  Thanks for any help / advice

  Hi etaf,.

  I guess the short answer is: Yes, the problem with the software and the 3.0 Port.

  The long answer with a possible work around is as follows: first of all, the software looks for minimum requirements. Because the software is older, he doesn't know what a 3.0 port. You are right when you say that it should work since you do not use the USB and use wireless instead, but this is not the case.

  There is something we can try, but I can't guarantee it will work. I thought first we could connect a USB cable and run the software made to force the software to see the USB port, but then the software wouldn't even get far enough because you can't plug the cable to the most later in the installation.

  My second thought and most promising suggestion is to connect the USB cable (although we do normally not until the software prompts us to) and use the installation wizard HP Print to get the insteaad of software to use the CD or download from the printer driver page. Still, I can't say with certainty that it works, but I don't see why it would not be worth a try.

  If it works, and we get the software installed you can convert the USB connection to a wireless connection using the software. Fingers crossed! Download and run the with the following link. Printer HP install wizard for Windows

  If this does not work, or you don't want to bother with it (not worth trying), I might consider getting a new model of the printer. You can even call HP. They might be able to offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

• Probably a stupid question about sending electronic mail but not be received (or sent)

  Hello

  I try to send an email from my BB. I use this code below...

  Message msg = new Message();

  try {}
  String emailAddress = "[email protected]";
  msg.addRecipient (Message.RecipientType.TO, new address (emailAddress, emailAddress));
                      
  String fromAddress = properties.fetch () .getFromEmailAddress ();
  If (fromAddress.length () > 0) {}
  msg.setFrom (new address (fromAddress, fromAddress));
  }
                      
  If (properties.fetch () .isCopyEmailToSelf ()) {}
  If (fromAddress.length () == 0) {}
                              
  Returns false;
  } else {}
  msg.addRecipient (Message.RecipientType.BCC, new address (fromAddress, fromAddress));
  }
  }
                      
  msg.setSubject ("Testing");
                      
  content
  String content = "some test string";
                      
  msg.setContent (content);
                      
  Transport.Send (MSG);
  } catch (AddressException e) {}
                      
  Returns false;
  } catch (MessagingException e) {}
  Returns false;
  }

  I followed the tutorials in the knowledge base. I want users of my application to be able to configure the address and I don't want to save a copy of the email to any folder/email address on the phone.

  I'm currently debugging the code and it does throw an exception, and it is correctly signed. However, I get e-mails in the e-mail account 'to' or 'to' if account I have configured the application to bcc a copy for the account.

  Do I need to configure the appliance to send emails? I don't want to use any account e-mail on the device.

  Thank you

  SArah

  "can be sent to programtically without going through an email account set up on the phone?

  There is no API that I'm aware of that will support this.

  "When you say"works"he throws any exceptions, but it sends no emails no more"

  Doing so on the Simulator, not the end of the email to the top in the list of Messages.  The Simulator will attempt to send it and then, since you don't have the ESS work, give up.

  "If the user must create an account on the phone, do I need to modify the code to use it.

  As mentioned, I don't think that this code works without an account on the phone, so I think that this question is moot.

  "If you use the e-mail account on the device how is, you can define an address «of» the message?

  I don't think you can define an address.

  "you have more than one e-mail account on a device?

  Yes.

  You might find these links useful:

  http://supportforums.BlackBerry.com/T5/Java-development/sending-email-messages/Ta-p/442790

  http://supportforums.BlackBerry.com/T5/Java-development/retrieve-the-default-email-address-for-the-d...

  http://supportforums.BlackBerry.com/T5/Java-development/send-a-message-from-a-non-default-email-addr...

  Do a search too, I'm sure you'll find other useful things.

• Small Question about Advanced Configuration settings

  When you change an advanced value of a VM, why the new object is created

  New-Object VMware.Vim.VirtualMachineConfigSpec

  When we look at the object of $vm.extensiondata.config this object looks like for me VMware.Vim.VirtualMachineConfigInfo no "context".

  So my question... to rephrase and perhaps provide some clarification... Why is context and not ConfigInfo?

  Objects of the type of information are present when you retrieve a vSphere object, objects of type Spec are used when you configure a vSphere object.

  It's the Get-ter and Set-ter from the point of view PowerCLI cmdlets.

• Questions about replication configuration

  Hello
  
  We currently have the configuration of the following replication to a backup Timesten hot facility:
  
  CREATE REPLICATION REP1
  A store of DATA of ELEMENT
  MASTERS ds on "host1".
  SUBSCRIBED ds on "host2".
  RETURN TWOSAFE
  ELEMENT b DATASTORE
  MASTERS ds on "host2".
  SUBSCRIBED ds on "host1".
  RETURN TWOSAFE
  STORE ftappttprd on "host1" PREMISES COMMETTRE ACTION COMMETTRE
  RETURN SERVICES OFF WHEN REPLICATION STOPPED
  SUSTAINABLE COMMITMENT ON
  RESUME BACK 300
  Ftappttprd on "host2" LOCAL STORE COMMIT ACTION COMMITTING
  RETURN SERVICES OFF WHEN REPLICATION STOPPED
  SUSTAINABLE COMMITMENT ON
  CVS BACK 300;
  
  1)
  (a) only the part of the sentence 'COMMIT LOCAL ACTION VALIDATION' implies whenever replication fails on the Subscriber, so the update will be hired locally on master? that is, it is actually becomes a commit sustainable.
  (b) only apply to the timeout for replication scenario? What about other cases where commit at the Subscriber cannot be done.
  (2) if we do not have the expression of DISABLE RETURN as above, would be 'SUSTAINABLE ON COMMETTRE' and 'SUMMARY BACK' always to news?
  in other words, if we decide to stop the replication agent after failover mode standby
  -service back end
  -txn on master will commit sustainable
  -the return service will resume automatically when the replication agent is started again (after the replication problem is fixed)
  
  Thank you
  
  Mike

  Here are the answers:

  1)
  (a) only the part of the sentence 'COMMIT LOCAL ACTION VALIDATION' implies whenever replication fails on the Subscriber, so the update will be hired locally on master? that is, it is actually becomes a commit sustainable.

  CJ > if there is a timeout of servcie to return for a transaction twosafe the default behavior is that the transaction state remains "pending" and the appl; ication must include logic to keep retrying the validation until it succeeds or the application decides to abandon. By configuring LOCAL ACTION COMMIT ENTER, when a timeout occurs the transaction committed locally the band except manipulation (or ignore) the return servcie timeout warningf application has no need to make special anythnin.

  (b) only apply to the timeout for replication scenario? What about other cases where commit at the Subscriber cannot be done.

  CJ > it applies to delays. If you get a different kind of validation error then the application must decide what to (force a local commit or rollback).

  (2) if we do not have the expression of DISABLE RETURN as above, would be 'SUSTAINABLE ON COMMETTRE' and 'SUMMARY BACK' always to news?

  CJ > COMMETTRE SUSTAINABLE can be valid deoending on other factors, RETIURN RESUME is not valid (or useful)

  in other words, if we decide to stop the replication agent after failover mode standby
  -service back end
  -txn on master will commit sustainable
  -the return service will resume automatically when the replication agent is started again (after the replication problem is fixed)

  CJ > I guess you mean "failure" of the day before. Yes, with this configuration, you should see the behavior that yopu described above. The curriculum VITAE of RETURN should not be necessary.