MCI for Kaplan SAT Act PSAT 2008 drivers

Similar Questions

• Downgrade to XP (CQ61-403SA) - ask for other Sata drivers

  > When AMD Sata drivers that are presented in the guide not work for then start you ' new message ' on our forum to ask some other drivers Sata for this chipset. Please write there what drivers you used and give information out there about your p/n too.

  Hello

  I'm trying to downgrade my CompaQ CQ61-403SA to XP in order to use a piece of software that we use in the office which is XP only.

  I followed the instructions here to create a disc to start xp for my AMD chipset:

  http://h30434.www3.HP.com/T5/operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x000000...

  the problem is that the laptop won't boot from this drive (I reorganized the sequence of boot on the computer laptop. it will say "Press any key to boot from the CD"... and when I do it will pass temporarily to a CompaQ red screen before coming back to the same message "Press any key to boot from CD")

  additional information in the CPU - Z program:

  Motherboard:

  Hewlett-Packard

  Model:

  363 42,15

  Chipset: AMD 785GX Rev:00

  Southbridge: AMD ID439D

  BIOS:

  Version: F.13

  Date: 25/01/2010

  Any help would be appreciated.

  1. In Nlite, choose Insert -> multiple driver folder option
  2. Select ONLY x 86 driver for AMD SATA AHCI when asked if you are using a windows xp 32-bit cd
  3. Never choose x 64 driver when asked if youre 32-bit installation cd...

  Click on the star to say thank you...

  Click on accept as solution if my answer has solved your problem

• Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

  Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

  We load Windows 7 Enterprise on these newly purchased laptops, but do it have not the required appropriate drivers detect the hard drive on them. Impossible to find on the HP website.

  You can refer to a completely different question here, Marty. I was installing to a flash drive and it turns out that my install media has been connected to ports USB 3.0 on the left rather than right 2.0 ports. Moving to the ancient ports of 2.0 has solved my problem. Good luck.

• Restore media for a Sat Pro A10

  Hi, I lost my press kit for my Sat Pro but unable to download the drivers from the support site... everytime I try I just get a message saying that the file is not found. Can I download an ISO of the restore media, or someone can look at the download page for this laptop.

  Hello

  First of all, you can not download an ISO of the Toshiba Recovery CD image file!
  You can buy the CD of restoration but not download.

  If you wish, you can contact the ASP in your country and ask for this CD. It s not expensive.

  Regarding you driver problem;

  Well. I have checked the page of European disc of Toshiba and was able to download drivers for Satellite Pro A10.
  So I know exactly why you can't download the drivers but there is nothing wrong with the page.

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• Best OS for a MacbookPro, end of 2008?

  What is the best OS for a MacbookPro, end of 2008?

  It depends on your use.

  For OSX 1088 and earlier browsers are is more updated to fix security vulnerabilities

  The onver of Mavericks and later versions are still.

  You Mac can run and including El Capitan, but not of Sierra.

  Mavericks, Yosemite and El Capitan is not in the Mac App Store. If you previously download them you can always redownload them via the purchase of the Mac App Store

  You can buy codes to download for Lion and Mountain Lion

• What is the max memory for an iMac in early 2008

  What is the max memory for an iMac in early 2008? MacSales.com shows a 6 GB kit, but crucial only shows a 4 GB kit.

  Thank you

  John

  The computer iMac (early 2008) has two SDRAM slots in the bottom of the computer and comes with at least 1 GB DDR2 SDRAM installed into a slot. The maximum amount of RAM you can install in the computer is 4 GB (a 2 GB SO-DIMM in each slot).

  Source:

  iMac (early 2008): specification of memory - Apple Support

• Windows XP Home for Satellite A100 - 600 PSAAR edition drivers

  Hi all

  After a long search of Windows XP Home edition for the satellite A100-600 (PSAAR) drivers

  We found this driver works for this laptop.

  Sound: use the Toshiba driver available on the download page
  Chipset: Intel 945MP - driver infinst_autol.exe
  NETWORK LAN: PRO2KXP.exe (Intel)
  WiFi NETWORK: V11.1.0.0_XP_DRIVERS. ZIP (Intel)
  Display driver: 93.71_forceware_winxp2k_international_whql.exe (NVIDIA) + http://www.laptopvideo2go.com/forum/
  to change the "nv4_disp.inf" in the directory of the NVIDIA driver

  Mass storage: sp33416.exe (Texas instrument) - this package contains the driver for the Texas Instruments PCI (PCI - TI) 6 x 12/7 x 12 Cardbus (card reader
  Internal modem: mdm-sa100-psaa-xp-sm2162ald04-de.zip (on the Toshiba support page)

  And first use Everest software for our laptop hardware information, if you do not have a PSAAR A100-600!

  Hope this helps

  Concerning

  TOTO

  Hello Toto

  Thank you very much for your posting. If you have more information please post again because everyday someone post the same question. If you have the time thanks for posting your description under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=22425

  Thanks again!

• How to reset the password for administrator on windows server 2008 datacenter eddition before the login in vmware

  How to reset the password for administrator on windows server 2008 datacenter eddition before the login in vmware

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Photosmart e-all-in-one C310a: download page for the driver for Photosmart C310A for Windows XP does not have drivers to download.

  Download page for drivers and software for the Photosmart C310a never makes drivers.  He said that it could take up to 3 minutes, but I allow the page to run all night, and she was always in the morning.  Tried to load the page on Chrome and IE.  Windows operating system.  I need to download and install the drivers and the HP support center.

  The HP support site is back running for driver downloads.  Please report back if you have any additional questions.

• Query for windows small business server 2008 SP1

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hey AAAAAAAAAAAAtif

  It's an instance of vista installation

  Try the link below sbs forum

  This forum is for General Discussions on Small Business Server 2008, R2, 2003, 2003 SP1, 2003 and earlier versions. Gateway available NNTP Client if you wish to participate via a Newsgroup Reader. Read the sticky at the top of the forum Post.

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  Walter, the time zone traveller

• How can I change the player assigned to the SSD for a SATA instead of the SCSI drive?

  Original title: SCSI instead of SATA

  I built a PC with Windows 7 Ultimate 64 bit.  My C: drive is a Samsung 840 Pro SSD.  The system never worked properly and I discovered that the SSD which is a SATA 3 drive in Device Manager is configured as a SCSI disk.  Someone knows how to change the driver assigned to the SSD for a SATA instead of the SCSI driver?

  Hello Uriel,

  Thank you for your response.

  SATA controllers will normally appear as "SCSI" controllers in windows. It's normal and nothing to worry about. Often the SATA controllers will also be able to run in IDE mode and then they present themselves as IDE controllers, but it is unlikely that they will be able to operate optimally, as the IDE interface is missing some features of SATA. So even if you do not have the ability to set the cache in the Device Manager, a SATA controller is running in mode SATA should work just fine.

  The IDE bus is managed by the controller SATA3, and if this control is set in the BIOS to "IDE" somehow it seems related to the operating system as a SCSI device.  By setting this entry in the BIOS to "RAID/IDE" IDE devices get properly detected.

  This can also occur if you change the BIOS settings for the SATA ports of 'IDE' to 'AHCI' after installing Windows 7.

  I hope this information helps.

  Thank you

• Boot Dell Optiplex 3010 for controller SATA III card

  I upgraded my office 3010 to SSD for the boot drive and it worked very well for the SATA II ports on the motherboard.  I installed a Syba SATA III controller card and it is visible in Device Manager and doesn't show any errors.  When I connect the SSD boot to the controller card, the system doesn't see a bootable disc.  I'm not familiar with UEFI in the GUI of the BIOS so I don't know how to make a new section that will work.

  No boot UEFI without paying fees to microsoft for the certificate in the bios.

  Legacy of the CSM is the only way to 3rd-party storage Option ROM to boot.

  Once we get to class 3 Bios Legacy is gone! Fresh start prevents loading not sure $Microsoft paid bootloader.

  Change secure boot for Legacy GPT CSM requires complete reinstallation of the operating system.

  

  

  

• Satellite L645D-S4025 - need drivers for the SATA RAID controller

  Basically, I need the drivers to load my operating system, because at the time where he leans on my hard drive as unknown. I get BootMGR is missing error, so when I put my Windows 7 disc and go fix it is unclear what operating system is installed.

  So any help will be much appreciated. If you need more just information

  Hey,.

  Have you ever seen the Toshiba page? On this page you can download all the drivers and tools for your laptop:
  http://www.CSD.Toshiba.com/

  For this model with AMD chipset you can find the SATA driver in the display driver package, you must download the display driver. It also contains the SATA driver and chipset.

  But I m wondering why you started this question because there are already several discussions here in the forum about it ;)

• Need to display for my Sat M60 drivers

  Hello

  I can't display drivers for my laptop of M60 was sitting. Can someone help me please!

  Hello

  I guess that you do not check the Toshiba driver page. Am I wrong?
  I found a posting on the site of Toshiba driver.
  The driver is 15/07/05