Boot Dell Optiplex 3010 for controller SATA III card

Similar Questions

• (Redirected) Power Supply for dell optiplex 3010 & optiplex 390

  Hi, may I know how much cost for dell optiplex 3010 & optiplex 390 power supply, because

  my diet already dead and how I want to order it... :(....

  Hi Nathalie,.

  Please repost this in the forum Office help.

  http://en.community.Dell.com/support-forums/desktop/

• Façade Dell optiplex 3010 problem

  Hello everyone.

  "Dell OptiPlex 3010" I have a computer.

  I burned the motherboard. I bought another motherboard. brand: ' ASUS H61M-K '.

  I have a problem, please help.

  Façade cable does not fit into the motherboard.

  There are currently 15poles. but this isn't the entrance to the motherboard. How can we do?

  I'm waiting for your help.

  Thank you all

  Dell uses connectors custom between their motherboards, and facades. They do not have info on wiring in this connector available to the public.

  So unless you or someone else can map connections, you may not be able to use this new motherboard in this case.

  And, you will need to purchase a new license for Windows to use this new Council because the Windows license that came with the 3010 is related to the card mother Dell. And you have to reinstall Windows anyway.

  Options:

  1. Buy another motherboard of Dell 3010
  2. Buy a new Microsoft license case, new, re - use all the parts are compatible with the new Board of Directors and reinstall Windows on your HARD drive.

• driver for dell optiplex gx620 for Windows 7

  I ran a test of compatibility and told me that my 128 MB ATI Radeo X 600 SE driver on my Optiplex GX 620 with XP is not compatible with Windows 7.  Could someone tell me where I could get/download a compatible driver?  Thank you.

  Go here and work through the steps to search for a driver.

• Qosmio X 500 does support SATA III controller?

  Hello

  I think of one of my drives hard X500s replace with an SSD.
  So now I'm wondering whether to buy a SATA II (3 Gbps) or SATA III (6 Gbps).

  I understand that both standards will work on any SATA controller, but it the X 500 has a controller SATA III, so that I can take advantage of the extra speed of SSD? Because if not, I'd settle for the SATA II slower (and cheaper).
  Thanks in advance,
  Yanni

  Why you n t install a material such as Everest Home Edition or Sandra Software diagnostic tool.
  These tools are freeware and would provide details of s for laptop hardware.

  I also googled a bit for details, but I found just that mobile information supports the SATA interface. So it s mentioned not really what SATA controller is

• upgrade dell optiplex gx620 to vista need driver for onboard sound plz help

  dell optiplex gx620 to on-board sound card Vista upgrade is not compatible with Vista

  can anyone help with driver sound...

  The latest drivers that Dell has are for XP, they do not have Vista drivers:
  http://www.Dell.com/support/drivers/us/en/04/DriversHome/NeedProductSelection

  Vista - update drivers:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Vista - driver problem tips:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• Lights diagnostic OptiPlex 3010 Mini-Tower 3 & 4

  Hi all, I'm new to this forum. 2 years ago, I bought a dell optiplex 3010 mini tour, suddenly, it stopped working, I have no screen, no video or any kind of sound, the only thing it does is to turn on the lights of number 3 & 4 on the front panel. What can I do?

  Thank you

  erickfv12

  Hi all, I'm new to this forum. 2 years ago, I bought a dell optiplex 3010 mini tour, suddenly, it stopped working, I have no screen, no video or any kind of sound, the only thing it does is to turn on the lights of number 3 & 4 on the front panel. What can I do?

  Thank you

  erickfv12

  3 & 4 usually diagnostic lights indicate a memory problem, see page 42 here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_optiplex_desktop/OptiPlex-3010_Owner%27s%20Manual2_en-us.PDF

  First of all, try the following:

  Remove and reinstall all memory modules and try to start the system, to see if that makes a difference.

  Still does not start, remove all the memory modules [page 14] and then install only one module in the connector 1 and see if the system starts, and if the computer starts normally, reinstall an additional module.
  Do not start, move the module in slot 2 and still a time see if the system boots.

  Still does not start, then remove the first module, and using the other, repeat the sequence described above.

  Still does not start, purchase a new compatible memory module and try that.

  Then, if the computer still does not start, it is possible that the motherboard has failed and must be replaced.

  Bev.

• OptiPlex 3010 upgrade of RAM!

  Hi, I have a dell optiplex 3010 with Intel i5-3470 processor and 4 GB of RAM and I want to update 8 GB or 12 GB / 16GB, sort of Rams which are compatible with my own desktop (8GB / 4GB per slot, 800/1033/1333/1600 Mhz by RAM) and I searched for compatibility with Ivy H61 bridge (normally (, it should be my motherboard), but I did not pay what I'm looking for.
  Thanks for the help!

  Hello

  Thanks for joining us.

  This machine can hold up to 8 GB of RAM.

  The type of RAM installed on your PC is DDR3

  The speed of this motherboard supports

  • DDR3 1333 MHz (Non - ECC)
  • DDR3 1600 MHz (Non - ECC)

  I hope this helps.

  Thank you

• HP Pavilion g6-1384sa - SATA I, SATA II or SATA III?

  What versions of SATA HDD the HP Pavilion 1384sa g6 does support?

  Thank you.

  Hello

  It has a controller Sata III (6 Gb/s).

  Kind regards

  DP - K

• Lenovo y570 ssd sata III

  Hi all. I have a question about SATA3 ssd drive. My laptop is Lenovo Y570 is compatible with the interface SATA3 IE, I want to connect the SATA3 SSD instead of the old hard drive and install a system of programs, etc. Is that the laptop will not restrict the flow of data in this article?

  to be clear 3 Gbps transfer speed is for sata ii, not for the sata iii.
  supports the SATA iii 6 gb/s.

  (y570 supports sata ii)

• Slow startup on dell optiplex

  I went on my Dell Optiplex and for some reason is now take ridiculously long to load up, and when it loads up the screen is black, all you see is the mouse cursor. Finally, it load windows 7, but is very insensitive and takes a long time for the simplest commands. I loaded my pc in safe mode with network and it works very well, I was using the same pc last night and worked very well. The only thing I installed recently is updated from the Microsoft window.

  When I was in SafeMode I used recovery option to take back me to another date, but the problem still occurs.

  Please help me solve this problem, will be eternally grateful.

  Thank you very much

  Go to this website: http://support.wdc.com/downloads.aspx?lang=en

  Download and run Data Lifeguard (2nd in the list)

  Report a SMART test result.  Want to see a green check mark

  Right-click on your drive and choose executer run diagnostics, then choose quick.

  You can run the extended too test, but it will take several hours to run.

  This test will tell you if your hard drive is failed.  If this isn't the case, then you would have ruled out a possible major problem.  If the State FAIL, then your next action will be a new replacement hard drive.

  IF all tests pass, your next step is to perform an analysis of the data recorded on the disc.  This test can take several hours.  To do this:

  1. Click on Start globe
  2. Point to all programs and wait
  3. Click on accessories
  4. Right-click on command prompt, select run as administrator
  5. In the black box type chkdsk c:/r
  6. Then type Y for Yes
  7. Then type exit
  8. Restart your computer

  Get back to me, when it's over

• install SATA drive for dell optiplex 170L

  Cannot install a new SATA hard drive in Dell Optiplex 170 L.  Windows XP Pro SP3 cd cannot find the hard drive. Need help please.

  Hello

  This problem is related to the installation of the equipment, I would suggest you get in contact with the system manufacturer for assistance that you need the BIOS (Basic Input Output System) Setup to install the new Windows XP SATA drive. Will also need you a floppy drive to install the new SATA drive.

• Dell Optiplex 3040 MT - in the BIOS there is no option to select "ATA" for SATA Operation! (Impossible to deploy the Image system Windows 2008 Server in AHCI Mode)

  Dear Experts,

  I am unable to find the "ATA" option in dell optiplex 3040mt. where might not deploy top Windows Server 2008 image.
  In dell 3020 I deploy the image using ATA mode.
   
  Please tell us how to activate the "ATA" option in Optiplex 3040 and install windows server 2008.

  Thank you!

  Jesse There is no option in 3040 because the ATA mode is no longer supported.  F6 drivers are REQUIRED for windows 7, 8 or 10.   XP/VISTA is not supported at all and will not be installed.

  AHCI is the only option available in the modern Bios and chipsets.

  The INTEL RST F6 drivers are REQUIRED for all advanced sector format 4 k drives. Most of all the readers

  https://Downloadcenter.Intel.com/download/25165/

  

• Replacement 250 GB C: drive in Dell Optiplex GX 620 with WD 750 GB SATA drive by cloning. BIOS sees the drive, Windows XP does not work.

  I have 5 Dell Optiplex GX 620 desktop computers.  All are about 5 years old.  Had a hard drive failure so I replace the disks C: by secondary SATA disk cloning, disk 1 in the bios.  BIOS sees drive when Windows XP on two systems and not on the other three.  Have no idea why.  All rooms have all the updates of Windows and Dell. A bought WD Caviar Green drives.  WD has replaced three with Caviar Black readers and still does not work.

  Level 2 support WD had response which was to creat Acronis True Image WD Edition BACK boot CD for the windows version of the software, (that I downloaded on www.wdc.com), boot to a CD and had the disc I cloned then.  I wish only the support level 1 guy was aware of this utility.

• OptiPlex 3010 with third-party RAID controller

  Hello

  I installed an Adaptec RAID 1220SA controller in an Optiplex 3010 and contains two HARD drives in the annex. It is not all disks connected directly to the motherboard. The RAID card, or readers connected to it are visible in the BIOS, so they cannot be selected as boot devices.

  The machine starts OK, past through the initialization of the controller RAID OK, but then it stops with a 'no hard drives detected' attention, giving 3 choices: continue, go to the bios, go to the automatic test utility.

  However, if (continued) F1 is pressed, it starts perfectly among the RAID drives and everything works as expected.

  Any ideas how to get rid of this error/warning message?

  Hi nehamanoka,

  I got the same problem as you, only with an Optiplex 7010 and also an Adaptec 1220SA and a Promise Fasttrak TX 2300 raid controller.
  (press F1 to continue...)

  I also tried a lot of things and my 7010, she collaborates with the following parameters of the BIOS (Dell):

  General - startup sequence: drive HARD internal
  System - integrated NIC configuration: enabled w/PXE

  I have no idea why it works now and I had no problem with a 790 Optiplex.

  HTH