MD3000i and TL 2000

I was wondering if it is possible to connect the TL2000 to the MD3000i SAS out port.

TL 2000 has 2 LTO 3 drives with SAS ports.

The MD 3000i has dual iSCSI controllers

The reason is that I picked up a used rack. And everything should work, but I did not see the connected cables before he was down.

And I don't see any other sources he may have been connected. None of the servers have no external SAS port.

When I plug the 2000 TL in the MD3000i she complains of the degraded SAS ports and it stays that way.

TL 2000 said its 3/Gbit connected and OK. I read somewhere that degraded port maybe because it is using 1 of 4 channels.

Both are upgraded to latest firmware.

So my questions.

If supported what menu in MDSM would he appear in if everything...

If not supported what SAS card recommend.

Thank you

Kristian

Kristian_Br,

You are not able to connect the TL2000 behind a MD3000i. The reason behind this is that the CM in the 3000i is a RAID controller and you cannot connect the TL to a RAID controller. The TL2000 is supported only to work when it is connected behind a 6GB SAS HBA. That SAS Out Port is only intended to connect the tables as a second MD3000 or an MD1000 expansion MD. If you have any questions do not hesitate to let me know.

Tags: Dell Products

Similar Questions

  • Microsoft Wireless Keyboard and Mouse 2000

    The transmitter/receiver (Microsoft 2.4 GHz V 7.0, model 1423) this above mentioned product has got damaged and I cannot locate the customer for her service. The one you suggest the right steps?

    Hi David,

    For assistance with Microsoft wireless keyboard and mouse 2000, you can contact the materiel support team referring to the content in the link.

    Wireless Desktop 2000:

    http://www.Microsoft.com/hardware/en-us/p/Wireless-Desktop-2000#support

    Support:

    http://www.Microsoft.com/hardware/en-us/support/contact-us

  • Windows XP screensaver no longer works after insalling wireless keyboard and mouse (2000)

    Original title: eve of screen Windows XP stopped working

    I just installed a Microsoft wireless keyboard and mouse (2000) and now my screensaver lights.

    Checked the setting in Control Panel and all looks good.

    Hi Rich 664,

    · What is the service pack installed on the computer?

    Check out the link that mentions on the same question below: the screen saver does not start after the installation of a wireless pointing device: http://support.microsoft.com/kb/913405

    With regard to:

    Samhrutha G S - Microsoft technical support.

  • Can a system using Windows XP Professional remotely help another system by using Windows 2000 Professional and control 2000 Professional computer to help solve the problems?

    Windows 2000 Professional has the capabilities of remote assistance?  My sisters husband just passed away and she doesn't know anything about computers.  All their documents, photos, ect..., my brother-in-law kept on the computer.  We live thousands of miles away and I can't fly to him.  Can I remotely access her computer and control it with mine that uses Windows XP Professional?  If the answer is "Yes", if you please tell me how to do it.

    Hello Jeff,.

    -Remote Office application do you use?

    You will be able to connect Windows XP computer to Windows 2000 via the remote desktop connection.

    I suggest you to check the following links for the desktop connection software remotely for Windows XP and Windows 2000.

    Windows XP Remote Desktop Connection software

    Configuration of remote desktop

  • Can anyone help to do a STARTUP. INI file for a hard drive partitioned, under win xp and win 2000

    Hello

    On my old computer, HP Compaq nc6120, I installed Windows xp (C:\) and windows 2000 (D:\).

    Before when I started this computer I could choose if I want to start windows xp or windows 2000. But lately this menu does not appear. Comes to the place a line of messege 'bad START. INI file. From C:\WINDOW\', then windows xp starts automatically. Apparently the BOOT. INI file has in some way has been deleted and I don't know how to start windows 2000.

    Can someone help make a good START. INI file? I appriciate even as an advisor about which ev. Literature can help.

    Sincerely

    ARIO

    I think remember that Windows 2000 is based.

    So, you can try solution 2 on this site as long as you have a Windows 2000 disk to boot from.

    The steps are written for XP, but it should also work for Windows 2000, because it is also NT based.

    Let me know if it helps.

  • Word of microsoft and excel 2000 work on Windows 7? __

    Word of microsoft and excel 2000 work on Windows 7?

    Office 2000 such as Word and Excel applications not certified for Windows 7, so there is a possibility of compatibility issues. I suggest that move you to a more recent version of Office 2003 or 2007 that is known to work with Windows 7. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

  • How to determine the window is larger than 1024px and sotp (2000)

    can I use the code on stage timeline (1000) as:

    If the windows width > 1024px { getStage().stop (2000) ;}}

    and timeline (2000) add code like:

    If width of windows < 1024px { getStage().stop (1000) ;}}

    pls help to make right.thanks. I am very new to this...


    Hi, Peter.

    You can use JavaScript to determine the width of the window.  Here's a simple explanation I found:

    http://www.JavaScripter.NET/FAQ/browserw.htm

    Hope that helps,

    -Elaine

  • Facebook reports that I use v3.5 of Firefox and Windows 2000 when running on 16.0.2 and XP (upgraded system). where is this info and how to reset?

    the PC has been improved from Win2000 to XP and has all the XP service packs. It also runs Firefox 16.0.2. When I go on Facebook and other pages, it says that I'm on an unsupported operating system (said I use Windows 2000), and I should upgrade my browser to the latest version (said I'm under FF 3.5 or 3.6 FF, can't remember which). i've looked through the registry, but not not found something that jumps. where can this info could be stored that Firefox is looking.

    Try reading some sites say that Firefox is obsolete or incompatible, even if it's the latest version

  • Satellite 2800-600 and Windows 2000

    Hello

    When I install Windows 2000 Prof I have a problem: Inaccessible_Boot_Device. What I need to do to install this system.
    Sorry for my English

    Poland Rafal

    Hello Rafael

    If I understood your right that the W2000 is already installed on your device, but you can not start the operating system. Whenever there is message Inaccessible_Boot_Device. Am I wrong?

    As far as I know that this message occurs if the system card is exchanged and the operating system may not start correctly.

    Good bye

  • Satellite P30 and Windows 2000...

    Please, please, please... help me solve my nightmare!

    I tried all ways to install Windows 2000 on my satellite P30. All software and drivers are updated (service pack 4, dx9, lastes drivers, etc), but...

    When the installation of the white screen of graphic Ati drivers (ati 9700) appears and it crash (as shown in the previous topic: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4136&messageID=13825#13825 - I want to reopen that walk but is locked)

    The problem is that I have great experience in the software/hardware and I have installed all drivers (drivers omega, satellite m30x drivers, drivers ati, different drivers manufactured, ecc.) but the problem STILL persists.

    I'm going to give up, but before that I would like to know, if someone here in this forum has solved this problem or if anyone really expert could suggest me other ways to install windows 2000 on this computer?

    Thank you!

    Hello

    Nick is quite right. W2000 is not officially supported for this model of laptop, and you won't find a graphics card driver on Toshiba download site. I assume that you have installed the driver from ATI directly download site. In this case there is no guarantee that it will work properly.

    Sorry

  • Booklet 70CT and Windows 2000

    I just installed windows 2000 on my 70CT booklet, everything went well, but the display is only 16 colors mode. In hardware devices, no driver has been recognized and it doesn't seem to be one on the Toshiba site, are there any other drivers you can use or y at - it for win2000?

    Thank you

    Nick

    Hi Nick

    This small unit is not supported for Windows 2000 and this is the reason why you can't find the correct driver.

    The only thing I found out is the 70CT booklet has chips & technology F65550 graphics card. Try to find a driver on the net. Sorry but I have no more information for you.

  • M30X-124: can not find the drivers for linux and windows 2000

    I want to know how I can linux Redhat 9.0 on my computer. Wenn, do check the hardware, the screen goes black.
    And I want to install windows 2000, windows 2003 or later. But the important point is that I can´t find all the drivers on the site.
    Thank you

    [Edited by: admin 7 May 05 08:36]

    Hello

    Sorry, Toshiba provides only the drivers and tools for the OS liveries (M30X: WinXP). But you can search with google for drivers of W2k adapted. I think you will find them!

    Win2003 drivers can be a problem because it is a server operating system and there is not so much drivers for laptop available!

    For Linux, I found 3 interesting sites for you!
    http://newsletter.toshiba-tro.de/main/index.html
    http://Linux.Toshiba-DME.co.jp/Linux/index.htm
    and
    http://www.Linux-on-laptops.com/

    Tanya Bye

  • Tecra M2 - not connecting to the internet via WLan and Win 2000

    Recently got Tecra M2 working under windows 2000 after the help of this forum. - jarviei post.
    I had a problem with the Intel pro 2200bg Intel wireless card type.
    The unit was able to provide info when right clicking the device in Device Manager, a report of the "State of the unspecified device" or similar has been posted.

    I removed the drivers and used an older version that cured this problem.
    To driverguide.com: intel_proset_9020tic_97904.zip
    But I can still access internet t.

    I can connect to the router wirelessly with the connectivity of 100% but that s where it stops. I use the wireless LAN hard wire disconnected.

    Using the Toshiba connectivity doctor using wire hard watch my laptop connect to the router - it shows as a hub/bridge and then connection goes ot to the internet.
    When I use the wireless radio icons show the laptop to the router but no internet connection.
    The router shows as an ad-hoc connection, almost as if he sees it as another pc.

    How and where can I set the machine to tell him to serve as a gateway/router to the internet in the wireless?

    Thanks in advance to all who help.

    Great news!

  • Error MicrosoftUpdate and Windows 2000 AVG 9.0 - u going to post a fix for this? Thank you

    On AVG, I noticed that your update wiped out the DLL AVG.exe

    and you are aware of this - you're going to publish an update to fix this error

    If so - I not crazy with it, now that I'm not a computer expert of all means and

    want to be messing with the registry of the dll

    See http://groups.google.com/group/microsoft.public.exchange.admin/browse_frm/thread/b7d2d495377bb210

    The updates-in-it comes to Visual Studio or Visual C++, not Windows 2000 or Exchange itself.

    Extended support for Windows 2000 SP4 ended July 13, 2010. There will be no other specific updates Win2K so you should not update the Win2K computer.

  • Update for Windows XP and Office 2000 Premium question

    Original title: issue of the update for Office 2000 Premium and Windows XO

    If I have Office 2000 Premiun and Windows XP should update Microsoft .NET Framework 4 Client Profile for Windows XP x 86 (KB982670)?

    Hello

    -Are you facing problems with the installation of the update of Windows?
    -If so, what error you get?

    Microsoft .NET Framework are very essential for the programs to run efficiently on your computer. I suggest you keep your computer up-to-date with the latest Windows updates.

    If you have problems with the installation of Windows updates, follow the steps in these articles.

    http://support.Microsoft.com/kb/822798
    http://support.Microsoft.com/kb/943144

Maybe you are looking for

  • If I send telemetry information, is there a threat to my computer and personal security opportunities?

    I read the info provided and understand the details of my use of the computer and the I.P. address are collected for experimental and statistical data. Are there chances of my data compromised as it is sent, or after it is received? I'm sure most peo

  • Black screen on Satellite A210

    Hi all The screen of my Toshiba Satellite A210 broke so I replaced it and RAM mounted, new screen worked for a few days now, it's a pure black with no sign of life.I took the battery and put it back in and replaced the RAM but still no visual.

  • Installation of Win7 x 64 SP1 with junctions

    Hello I have a Win7 x 64 install on a 64 GB SSD HARD drive with (Program Files, program (x 86) file, Windows\Temp, users, Windows\Logs) Junctioned all on a Raid 0 array... This is a lot of technical sense as long as it removes the heavy wrote far SSD

  • H8 - 1420a with Windows 8.1 audio loss

    Hello Anyone has a solution or know when new audio drivers will be available for the nsce HP h8 - 1420a for windows 8.1 64-bit? I tried to restore the drivers original from the page by using the winzip driver update and support to locate the new driv

  • Cannot sort on custom object

    We have developed a plugin for the vSphere web client using SDK published in 10/09/2012. We found that we cannot address one of our newly created objects. We fix the native objects of VMWare. Do we need new patches or updates to make it work?Thank yo