H8 - 1420a with Windows 8.1 audio loss

Hello

Anyone has a solution or know when new audio drivers will be available for the nsce HP h8 - 1420a for windows 8.1 64-bit?

I tried to restore the drivers original from the page by using the winzip driver update and support to locate the new driver, but none of them solved the problem.

At the present time, I have no sound availabe.

Please download and install the audio driver from the following Internet link that would solve audio problems:

http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59861.exe

Tags: HP Desktops

Similar Questions

  • Problem with Windows Media Player Audio sync DivX playback in full screen

    Hello

    I have found lately that when playing videos on Windows Media Player divx mode full screen audio is out of sync.  If the video is played in window mode, there is no problem.  I had no such problem in the past, but now for about 1 month or so, I have this problem.

    I have fitted iq508a to vista 64-bit, with the latest drivers delivered HP installed (using the HP update utility)-does anyone else have this same problem too?

    Thanks in advance

    Jim

    Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

    I can't believe! I solved the problem with this problem of video audio sync during playback in full screen!

    While watching the Pineapple Express, I thought WTF I'll take another closer look at this, and while they were smashimg their cell phones so that they could not be found by triangulation, (don't ask - u just I have to watch - stoner movie )...

    in any case, I looked under tools options in WMP.  I unchecked the option on the performance tab "use video smoothing"-the video as reloaded and bingo! everything in harmony!

    BTW, I checked my another PC running Vista 32 bit and the option ' use video smoothing ' also exists and it is checked if this seems to be a problem with WMP works on Vista 64 bit or running desktop Touchsmart of WMP... In case I am much happier now...

  • Problem with Windows Movie Maker - Audio is messed up

    OK, so I'm doing a film, with the lyrics of a song. I put pictures of her and paired words. It worked fine for a few songs. Then when I went to make another, I imported the song, but the time of audio changes. I mean, it's that I can't say... 0:20 seconds in the song and it should play the same part of the song, whenever I go to 0:20 seconds. On mine, it keeps switching autour. I'll go to 0:20 seconds and it will play what he normally plays at say 0:15 seconds. Or I'll set it to 0:40 seconds and he will play the music to 0:20 seconds. That's when I jump to that point in the song. If I start from the beginning and let him play through, then he plays at the normal time to 0:20 or 0:40 seconds. But he messes up and plays the wrong thing when I skip some time that is not at the beginning. Does anyone else have this problem? How should I do? Should I uninstall WMM and redownload it? Or is it a thing of setting? Help, please! Thank you!

    I had this same problem. Assuming that the music is your use of WMM in iTunes, follow this:

    1. open iTunes

    2. click on Edit--> preferences

    3. click on import settings

    4. in the drop-down arrow next to the import to help:, select WAV encoder

    5. press the OK button

    6. now click on the songs you want to use in WMM

    7. click on advanced and click on create the WAV Version.

    8. now, when you return to WMM, click on import Audio or music and go to your iTunes folder. Versions WAV songs you create must be there and when you import, you should have no trouble in :D

  • Audio loss. UAA Bus Driver reads Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). All the patches?

    Audio loss.  Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ».  Tried to update driver and restore without success.  Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it.  Restored to an earlier date but still what system did not go.  Tried to uninstall and reinstall the driver.  Uninstall was successful but reinstall it read that the hdaubus file does not exist.  I'm a computer dunce.  Any help out there?

    Hi BarbaraWolfe,
     

    There are many causes of Code 39 errors:

    • A required device driver is missing.
    • A required binary file is corrupted.
    • There is a problem with the file I/O process.
    • A driver that refers to an entry point in another binary file cannot load.
    Re-install the driver by downloading it from the link given:
     
    Additional reference on:
    Check if that helps.

  • Laptop computer Dv8285ea with Windows 7: audio driver does not

    On my laptop dv8285ea (bought in 2006), provided with Windows XP, I mounted a new SSD drive and installed Windows 7 Prof (32 bit).  -It works great except for one problem: there is no sound from the speakers. I get error messages like "no Audio output device installed. In other words: the good part of the motherboard is not compatible with the audio driver for Windows 7.

    Can anyone point a solution?  -The dv8285 is not among the notebooks that HP supplied Win7 drivers for.

    Thanks for posting this reply!

  • Audio problem with Windows 7

    Hello

    I have successfully upgraded from Vista to Windows 7 and I'm very happy with him... except. Audio glitches!
    With Vista, I have not had any audio problems but now with Windows 7 I. With the help of the dpc latency checker, I disabled all the drivers I could disable but no result.
    Can someone help me please?

    Hello

    What model of laptop do you have exactly?
    Have you installed Win7 its the most recent driver for your laptop model?

  • How to get AC 97 Front Panel Audio and Microphone ports to work with Windows 8

    I have a m7277c HP Media Center that uses the motherboard Asus P5LP-(Lithium-UL8E) and has an Audio Jack and Microphone AC 97 spec ports on the front panel. I tried to install the Codec AC 97 drivers for Windows 7 and they do not work for Windows 8. The 'High Definition Audio Codec"Windows 8 drivers only work for the Ports on the rear panel, not the Ports on the front panel.

    How can I get AC 97 Front Panel Audio and Microphone ports to work with Windows 8?

    Hello

    Your model has not been tested for the use of Windows 8.

    For this reason, HP cannot provide instructions to upgrade or Windows 8 pilots.

    Therefore, it will be very difficult to provide a solution.

    Thank you

  • Impossible to get gateway multimedia audio controller driver for computer laptop 7508gx to install correctly. Other drivers that work with Windows Xp Pro for this material?

    The name of the driver of the gateway I get is Realtek Ac 97 Audio.
    Ive uninstalled the driver from Device Manager and added new material.
    Installation begins - the error saying:
    He can not pass the test windows logo to check if its compatible with windows XP

    More detailed, it says its recommended that he be not installed, if ignored its 10-error code saying that it will not start.

    Hello Osnapchuckie,

    Thank you for your message.  Is your aftermarket sound card or is it integrated with your Gateway computer?  Try to download and install the latest driver for your computer at the following sites.
    Bridge - click HERE to go to the gateway site and download/install the latest driver for your computer.
    RealTek - click HERE to download/install the AC 97 Codec from RealTek.
    If you are still not able to install these drivers, start in safe mode with networking and download/install the drivers from there.  Click HERE for Safe Mode instructions.
    Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • M - Audio Keystation 61es device not recognized with Windows XP

    Having bought just a M-Audio Keystation 61es plug-and-play and running XP service pack 2, the computer does not design it.  I see on the online forum that these are not recognized in Vista either... Help.  I tried to download the right driver update M-audio - still does not work.

    Hello MotherKim,

    Thank you for visiting the Microsoft answers community.

    What version are you running to XP?

    According to M-referencing, this device is compatible with Windows XP SP2 Home / Professional Edition ONLY.

    How do you connect your deivce? Take a look at this image.

    If you simply connect with the USB, the nYou must not do anything other than plug according to the user's guide.

    Hope this information helps Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Using a HP DC7900 with Windows XP Pro 64 bit, looking for the audio driver.

    Using a HP DC7900 with Windows XP Pro 64 bit, which does not support the HP.  I found all the drivers except the audio driver.  It's a HD audio integrated with AD1884A codec.  Can someone tell me please the driver?

    HP supports evrything but XP 64 bit for this system.  I already tried the mftr chipset. What struck me everything but audio.  So I installed a card SB X - Fi I found laying around.

    Thanks for the information!

  • No audio HDMI with Windows 7 Ultimate

    Since the departure of Vista with Windows 7 Ultimate, I lost audio HDMI.  I can connect video successfully to my Sony KDL46VL150 but will not come out through the home theater system.  It comes via the laptop.  I tried to update the drivers, but clearly, I have not found the right pair.  I tried as well through the website of HP, and Intel.

    The audio drivers in the system are now:

    Stwrt64.sys IDT High Definition Audio CODEC Version 6.10.6276.0

    Intel(r) High Definition Audio HDMI IntcHdmi.sys Version 6.10.0.2056

    I suspect that the HDMI driver is not 64-bit.

    Any other suggestions?

    Thanks for the tips.  I downloaded the drivers and the saved on the desktop as you suggested.  However, I could not find the graphics driver as you have described.

    I also followed the following suggestion I had to re-boot with the HDMI cable connected to the TV and it worked.  I see now that I have 2 identical drivers (Mobile Intel 4 Series Express Chipset Family) loaded in graphics cards.

    In any case, the problem is resolved.

    Thank you very much.

  • problem Audio ban X200t with Windows 7

    I have two x200t with a Lenovo X 200 ban Dockingstation.

    With the x200t Vista Tablet installed Audio works perfekt.

    But I have trouble with the Installation of Windows 7.

    I'm not able to get the Audio Port ot the ban.

    I tried following this day:

    -reinstalled the Audio driver

    -trying to find a newer driver-> without success

    No idea how to get the Audio Port works with Windows 7 and ban?

    Thank you for our help so far.

    I downloaded the latest Vista driver for x 200/x200t and tried to install it. But the Installation fails mith an Error Message.

    So I did following:

    Start the Extraction of 6ea111ww.exe to C:/DRIVERS

    Right-click on computer-> properties, Device Manager, expand sound, video and controleur controller game, do a right click on the entry below-> update driver software, select 'Browse my computer for driver software', point to next:/DRIVERS-> C.

    If the driver Installation goes throght.

    Everything is now work perfektly.

  • Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording.

    Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!

    Hello

    Try resetting the default associations for WMP and IE.

    How to set default Associations for a program under Vista
    http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
    How to associate a file Type of Extension to a program under Vista
    http://www.Vistax64.com/tutorials/69758-default-programs.html

    If necessary:

    How Unassociate a Type of Extension file in Vista - and a utility to help
    http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
    Restore the Type Associations by default Vista file extensions
    http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
    How to view and change an Extension of filename on Vista
    http://www.Vistax64.com/tutorials/103171-file-name-extension.html

    ====================================

    Also follow these steps:

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ------------------------------------------------------------

    Then, if necessary:

    Have you recently installed another player?

    Reset your associations for WMP and IE.

    How to set default Associations for a program under Vista
    http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
    How to associate a file Type of Extension to a program under Vista
    http://www.Vistax64.com/tutorials/69758-default-programs.html

    ---------------------------------------------

    Do this to reregister the Jscript.dll and Vbscript.dll files.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    type or copy and paste-> regsvr32 jscript.dll
    Press enter

    type or copy and paste-> regsvr32 vbscript.dll
    Press enter

    Restart and if all goes well, it will run now.

    --------------------------------------------------------------

    Have you recently added stores or ANY application from Stardock?

    Using 64-bit Vista?

    Can you think of recent things you did in WMP which could be the cause? You added another
    reader recently or an add-on for WMP?

    When I try to use Windows Media Player 11, the program does not start, or some UI elements
    are empty - a Mr Fixit
    http://support.Microsoft.com/kb/925704/en-us

    Maybe something here
    http://msmvps.com/blogs/chrisl/articles/17315.aspx
    and here
    http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

    Check here the news of WMP11
    http://zachd.com/PSS/PSS.html

    I hope this helps.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • SigmaTel High Definition Audio CODEC is not compatible with Windows 7

    SigmaTel High Definition Audio CODEC does not work with windows 7. I tried to get my laptop to detect the hardware and it doesn't seem to be compatible with windows 7. I tried to update but without the cell knowing that its here I can't update. What can I do? Having no sound on my laptop, it is so quiet...

    Exactly the same thing happened to me. I upgraded my computer dell laptop of Vista (32) Windows 7 (32) on 24 December.  My codec high definition audio sigmatel could not be found since then.  This morning, I got fed up and found the free codec download sigmatel high definition audio...  Downloaded and my sound is working again...  We think just too hard I guess.  Hope it will be useful to you.  Good luck.

    http://download.CNET.com/SigmaTel-high-definition-audio-codec/3000-2110_4-173629.html

  • NO sound when recording Audio - problems with Windows 7 Ultimate 64-bit

    I got in trouble for almost a year now with NO sound when recording Audio with Windows 7 Ultimate 64-bit. I just found this forum today. It's really weird how recording with windows and other sound recorder works perfectly since 1998 or so until the upgrade to win 7. Now every time I try to record it shows no found recording device or just fails to record any sound. As you'll see below I have activated What U Hear so I can use the system recording features sounds.

    I use the functions of audio recording and pdf reader because I'm legally blind. It is one of the few tools that I could use with ease on all my systems windows for many years.

    A similar question has started happening with nvidia graphics cards. AND... I was led to believe that it was a problem with Sony wanting more strong piracy measures built into windows. Am I correct to assume that this is what is happening with the sound also today or is there a solution to this frustrating problem?

    I run a dxdiag & posted that, according to me, you asked another user on the forum, the same or similar problem.

    Help solve this problem would be greatly appreciated as this has been a problem for quite a while now.

    ------------------
    Information System
    ------------------
    Time of this report: 07 25, 2012, 19:06:02
    Computer name: RAIDER
    Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503) - 2030
    Language: English (regional setting: English)
    Manufacturer: Gigabyte Technology Co., Ltd..
    System model: P67A-UD3-B3
    BIOS: Award BIOS v6.00PG Modular
    Processor: Intel Core i5 - 2500K CPU @ 3.30 GHz (4 CPUs), ~3.6GHz
    Memory: RAM 8192MB
    Available OS memory: 8176MB RAM
    Page file: 2861MB used, 13487 MB of available space
    Windows Dir: C:\Windows
    DirectX version: DirectX 11
    DX setup parameters: not found
    DPI setting: Using System DPI
    System DPI setting: 96 DPI (100%)
    DWM DPI Scaling: disabled
    DxDiag Version: 6.01.7601.17514 64 bit Unicode

    ------------
    DxDiag Notes
    ------------
    Display 1 tab: No problems found.
    Sound tab 1: No problems found.
    2 Audio tab: No problems found.
    Input tab: no problems found.

    -------------
    Sound Devices
    -------------
    Description: SPDIF Out (Sound Blaster X - Fi Surround 5.1 Pro)
    Default audio playback: Yes
    Default voice playback: no
    Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
    Manufacturer ID: 65535
    Product ID: 65535
    Type: WDM
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    WHQL Logo would be: n/a
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Other files:
    Driver provider: Creative Technology Ltd.
    HW Accel level: basic
    Cap flags: 0x0
    Min/Max sample rate: 0, 0
    Static/Strm HW Mix beef: 0, 0
    Static/Strm HW 3D steers: 0, 0
    HW memory: 0
    Management of the voice: No.
    Listen/Src/EAX (TM) 2.0: No, no
    Listen/Src/I3DL2 (TM): No, no
    Sensaura (TM) ZoomFX (tm): No.

    Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
    Default audio playback: No.
    Default voice playback: Yes
    Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
    Manufacturer ID: 65535
    Product ID: 65535
    Type: WDM
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    WHQL Logo would be: n/a
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Other files:
    Driver provider: Creative Technology Ltd.
    HW Accel level: basic
    Cap flags: 0x0
    Min/Max sample rate: 0, 0
    Static/Strm HW Mix beef: 0, 0
    Static/Strm HW 3D steers: 0, 0
    HW memory: 0
    Management of the voice: No.
    Listen/Src/EAX (TM) 2.0: No, no
    Listen/Src/I3DL2 (TM): No, no
    Sensaura (TM) ZoomFX (tm): No.

    ---------------------
    Sound Capture devices
    ---------------------
    Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
    Capture audio by default: Yes
    Default voice Capture: No.
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Cap flags: 0x0
    Format flags: 0x0

    Description: Microphone (Webcam Pro 9000)
    Capture audio by default: No.
    Default voice Capture: No.
    Driver name: USBAUDIO.sys
    Driver version: 6.01.7601.17514 (English)
    Driver attributes: Final retail
    Date and size: 2010-11-21 13:23:47, 109696 bytes
    Cap flags: 0x0
    Format flags: 0x0

    Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)
    Capture audio by default: No.
    Default voice Capture: Yes
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Cap flags: 0x0
    Format flags: 0x0

    Hello

    In Services, verify that the Windows Audio service is running and set to automatic.

    a. Click Start and type Services and press ENTER.

    (b) ensure that these services are defined accordingly.

    c. right-click the service, and then click Properties.

    According to the DXDiag, there is no default sound capture selected.

    Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
    Default audio playback: No.
    Default voice playback: Yes

    Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
    Capture audio by default: Yes
    Default voice Capture: No.

    Description: Microphone (Webcam Pro 9000)
    Capture audio by default: No.
    Default voice Capture: No.

    Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)

    Capture audio by default: No.

    Default voice Capture: Yes

Maybe you are looking for