mechanism between DB and application server

Similar Questions

• DCOM and Application Server failed during Setup

  Hi Experts,

  At the time of the financial management configuration showing DCOM and Application Server has failed. DCOM user is created.

  Server details:

  Windows 2008R2 64

  Hyperion 11.1.2.3 64-bit

  Database: Oracle 11g

  Thank you!

  Hello

  Try to reconfigure the "and configure DCOM Server Application" without using the name of the server.

  Ex:

  Administrator

  Instead

  Servername\Adminstrator

  Thank you

• Certification of discoverer and application server platform.

  Hi Hussein.
  
  Could you please let me know the links to the certification of the platform for Discoverer 10.1.2.2 and application server 10.2.0.2 on HP-Itanium server version 11i v3 (11.31).
  
  Kind regards
  Satya.
  
  Published by: srsatya on August 27, 2009 03:51

  Satya,

  http://www.Oracle.com/technology/software/products/IAS/files/as_certification_r2_101202.html

  Yes, I think you can also check this link.

  Kind regards
  Hussein

• the difference between the Web application server and Web server?

  What is the functional difference and the relationship between the Server Web applications and Web server, for example: Weblogic is the Application Web server, IIS is the Web server, Apache is the Web server and Oracle Application Server is the Application Web server? Someone said, Web Application Server is a Web server, but more functional superset, seems in this case, we can also use a server of web applications as a web server. For example, we can use Weblogic, but do not use IIS and Apache, please correct me?
  
  Published by: user2571802 on February 28, 2010 18:51

  Hello

  Have a read of http://www.javaworld.com/javaqa/2002-08/01-qa-0823-appvswebserver.html if all goes well it should give you a little more understanding.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

  Published by: JohnGoodwin on March 1, 2010 08:17

• Configure the web server and application server deployment hangs in 11.1.2.2

  Hi all

  I want to install Hyperion 11.1.2.2 with Oracle 11.2.0.1 database. I installed all the modules successfully.

  At configuration time, I set up the Foundation Hyperion Essbase, planning and reporting with success.

  But the question, when try to configure HFM and FDM EMP Configurator crashes, in HFM Web server configuration and application Web of FDM configure FDM.

  I installed IIS, Oracle 32-bit and 64-bit, the Clients, and also configured DCOM.

  What comments can you do on this point, if any body faced the same question.

  See you soon,.

  Mady

  Hi all

  We reinstalled hyperion again

  then it works fine.

  Kind regards

  Mady

• Oracle 11G and application server installed on the same server

  What are the advantages and disadvantages installation of Oracle 11 G database and Oracle (forms and reports) application server on the same server?
  
  Thank you in advance, Sonya

  Some people might want their data in an area of separate network for security reasons.
  It also depends on if it is the same people who do maintenance on db and appserver.

  It is at a lower cost with a single server and only 1 Os to implement.

• Discoverer and application server 10g R2.

  Hi all.
  
  I installed the application server with the discoverer, but I found no dicoverer it
  It is nothing else but a batch file.
  Please guide me what should I do?

  Hello
  Do you have what version of the application server installed? Not only 10g but you install 10.1.2.0.0 and 10.1.2.2 or 10.1.2.3, patch or have you installed a different version of basic?

  Discoverer 10 g R2 will be available if you use the application 10.1.2.0.0 Server and then patch 10.1.2.2 or 10.1.2.3. If you have installed a different version of the application server you won't have the engine installed discoverer.

  To test simply launch a browser and call the URL for the home page of the server like this: http://yourserver.yourdomain:7778

  If the discoverer is installed you will see links to launch more Discoverer and Discoverer Viewer. You can also try to call direct using Discoverer: discoverer/more/http://yourserver.yourdomain:7778 or http://yourserver.yourdomain:7778/discoverer Viewer

  Another way to see if the discoverer components are installed is to locate the root for the ORACLE_HOME in which the application server has been installed. From there, if you have discoverer, you will see an ORACLE_HOME\discoverer with Sub-folders folder of config, deploy, lib, newspapers, mesg, doc, plus_files, secure and util.

  In addition, if you browse here: ORACLE_HOME\j2ee\OC4J_BI_Forms\applications you should see a folder called discoverer

  If you can't find the files above, you have installed an application server which does not support the discoverer. You will need to uninstall it and then install 10.1.2.0.0 and it patch. You can also find this post on my blog to be useful: http://learndiscoverer.blogspot.com/2008/04/most-useful-patch-numbers.html

  Best wishes
  Michael

• Sort of the differences between Oracle and SQL Server

  Hi all
  
  This question is linked by both Oracle and SQL Server
  
  I have a requirement where I want to compare 2 tables line by line. A table is in Oracle and other table in SQL Server
  
  And suppose that both tables do not have a primary key. Now when I sort records by using the order by clause for a column, then-
  
  Rows with null values in that column of Oracle are placed in the background.
  When that rows with null values in the same column in SQL Server are placed right at the top.
  
  How can I make one of them to behave like any other.
  
  My only goal is to have same order of lines in Oracle and SQL Server tables so that I can compare line by line.

  YADQ: Yet another Doc Question

  Can you please avoid them?

  Take your SQL reference manual, search for the ORDER BY clause and notice that it has
  NULL FIRST or LAST values NULL values.

  ------------
  Sybrand Bakker
  Senior Oracle DBA

• ADF and application Server 10 g SE1

  Hello
  
  ADF dose is delivered with Oracle Application Server 10 g R2 stranded OneEdition?
  
  Or should I take a separate license to use the ADF?
  
  Thank you!
  
  Abdjallil.

  ADF is included in all editions of Oracle application server. See this for more details:
  http://download.Oracle.com/docs/CD/B14099_19/core.1012/b14128/options.htm#BABBCFGG

  Thank you
  Shail

• What is the difference between Livecycle install OS and application server?

  Hello world

  Is there a difference in the installation between the two Windows OS or Linux?

  I am confused here given so many variations and possibilities, for example.

  Windows - JBoss / Web Logic / Websphere

  Linux - JBoss / Web Logic / Websphere

  Anyone here found any good combination in the production? Please share it here.

  Thank you

  Albert

  It depends on what the customer IT infrastructure consists of.  IBM stores tend to use WebSphere/AIX with DB2 as the database.  Free workshops tend to have JBoss/Linux.  Oracle stores tend to have WebLogic/Solaris with Oracle as the database.

• tape drive sharing between ndmphost and admin server usnig osb.

  Hello.
  It is available to share the tape drive between san usnig adminserver and ndmphost the switch?
  We have 6 lto5 disks and will be attached to the machine oracle ss7420 NDMP.
  The customer site has no backup of the customer unless the nas data.
  
  Reason why I'm asking as OSB catalogdb to tape drive backup.
  Is it safe to admin osb catalogdb backup as client or tape drive sharing is available?
  
  Another issue is that when we set up unit NDMP, NDMP host can control robot or robot control should assign to the server administrator or the two availble?
  
  Thank you.

  Yes it's available by design. You have to configure the NAS with the role of mediaserver and add a 2nd point of attachment to the device. You can then create calendars that limit to those fixing points. Allows you to share all the drives between all media servers.

  For the robot, I let the server admin to do that, just tape devices were mapped to the time. Controlling Robotics is a light enough task.

  Here is an example of one of my setups where the drive is shared between several media servers, Oracle Linux 4, Linux 5 Oracle and NetApp

  L700-1-lect1:
  Device type: Ribbon
  Model: ULTRIUM-TD2
  Serial number: 7MHHY00202
  In service: Yes
  Library: L700-1
  DTE: 2
  Automount: Yes
  Error rate: 8
  Frequency of application: [unknown]
  Debug mode: no
  Blocking factor: 512
  Blocking max factor: 512
  The current band: 999
  Use the list: all the
  In-car use: 7 months, 3 weeks
  Cleaning required: no
  UUID: 558a34da-045e-102c-8443-002264f35328
  Annex 1:
  Host: dadbdn01
  Raw device: / dev/tape/by-id/scsi-1IBM_ULTRIUM-TD2_7MHHY00202
  Appendix 2:
  Host: dadbdh01
  Raw device: / dev/tape/by-id/scsi-1IBM___ULTRIUM-TD2___7MHHY00202__
  Annex 3:
  Host: dadbeh01
  Raw device: / dev/tape/by-id/scsi-1IBM___ULTRIUM-TD2___7MHHY00202__
  Appendix 4:
  Host: ap1030nap
  Raw device: nrst1a
  Annex 5:
  Host: dadbak01
  Raw device: / dev/tape/by-id/scsi-1IBM___ULTRIUM-TD2___7MHHY00202__

  Thank you

  Rich

• Link between ITC and CallManager Server

  Hi list;

  The link between the CallManager and the CTI server is done via JTAPI or one Trunk IP (as gatekeeeper of access using H.323 or SIP controller and so on)?

  Concerning

  Bilal

  Bilal,.

  If you plan to deploy the IPCC with Avaya or Nortel, he has no problem using CT Connect as a CTI server. In this case you don? business ICT or CTIOS need t. I have a deployment with ten Avaya Definity and ICM is used for intelligent routing between the ten Avayas and Envox CT Connect is the CTI server for the agents.

  You can not use CT Connect with the IPCC and CallManager, for later call center, because CT Connect do? do not provide Contact Center functions: login, logout, ready, etc. With the IPCC and CallManager, you can use CTIOS.

  For Avaya, Nortel and other OBXs, Envox CT COnnect provides functionality to connect, disconnect and change the status of the agent. For CallManager only provides functions of phone or the duties of the agent.

  Juan Luis

• PowerConnect 5448 several VLANS between upstream and downstream server firewall

  I am struggling with what I thought, would be a simple task: route several subnets, each on one VLAN different, a firewall to a server.  In fact, I can't even pass the VLAN by default one still looking correct in the address tables and STP.

  Port 1 = firewall, VLAN 1 unidentified, 2 VLAN Tag, 1 PVID, tried the two trunk and general patterns

  17 = server NIC, VLAN 1 unidentified port, VLAN Tag, PVID 1 and 2 2, tried, tried both safe and general patterns

  VLAN 1 (firewall untagged) 10.84.195.0/24, 10.84.195.2 Interface IP and default gateway 10.84.195.1

  VLAN 2 (tag of firewall) 10.101.0.0/16, IP Interface 10.101.0.2 for 2 VLAN, firewall est.1

  The first thing I got was that something has not been properly marked by (Hyper-V, using SC VMM 2012 SP1) server or the firewall (Watchguard XTM 520).  Simple test: VPN Firewall, ping the switch to 10.101.0.2 with the tag, and works, remove the label and it doesn't.  Dynamic address table shows the two-way firewall.  Line 18 below appears right after the ping as planned on VLAN 2 with the same MAC address in VLAN 1.  In addition, I ping the switch 10.101.0.2 from the server and it works fine.  The table shows that VLAN 2 from the host (and 1 other VM), so it seems to me that everything is properly labeled.

  	15	VLAN 1	00907f8f571b	G1
  	16	VLAN 2	00155d1f1b07	G17
  	17	VLAN 2	001dd8b71c01	G17
  	18	VLAN 2	00907f8f571b	G1

  What I can't do, is ping through the switch to VLAN 2.  I can't ping my VPN server (10.101.20.1), and I can not ping to the gateway (10.101.0.1) from the server.  Note, it is not because of rules to firewall on each end.

  What Miss me?  I don't think I need a routing of layer 3 here, I don't have to go through VLAN, just have them several VLANS passes from one port to the other.

  Other things to note in case it is useful:

  -I have no connectivity not tag with everything else through the 10.84.195.xxx/24 switch.

  -If I delete the Tags VLAN port 2 1 trunk, I suddenly can ping the bridge VLAN 2 (10.101.0.1) from the server, although I suspect that it is because the same port is the default gateway for the switch.

  -For brevity, only 2 lines of the STP are listed below, but all ports are therefore based on the question of whether they are connected or not.

  G1 activated 128.1 Frw Desg P2P (STP) No. 4
  G2 activated 128.2 Dsbl Dsbl No. 100.

  -Latest firmware installed.

  -In addition, for people concerned about their security, I want to remove use VLAN by default in the future.

  Would it be possible for run you to stick your show output here in the forum.  In this way, we can take closer look at what you have configured.

  If you connect a desktop/laptop computer (with and intellectual property in the 10.101.0.0/16 range) in a port with the mode of access switchport VLAN 2 are you able to ping IP Interface 10.101.0.2 for 2 VLANS?  You could try to disconnect the firewall and the configurations for the port and work on getting through the switch with 2 terminals on a single VLAN.  Then, once this is confirmed as work connect the firewall back up with a trunk/general mode adding the VLAN necessary.

  You connect to the firewall on a layer 3 interface?  You need Layer 3 routing to reach the firewall correctly.

• Repeated loss of connection between Outlook and Exchange server

  Hello

  I am running Windows 7 beta ultimate evaluation copy Build 7100.

  On that, I installed Office 2007, part of which is Outlook (12.0.6514.5000) SP2 MSO (12.0.64251000).

  I do the usual Windows updates and recently, I noticed that my Outlook has been updated as when I turn it off, I have a new Outlook "grey" with a red 'x' icon in this document, which disappears when the software is finally off.

  The problem is that now Outlook repeatedly loses the connection with the Exchange Server in my (work) and I have to close Outlook in order to reconnect and reactivate.

  It only happens when I'm at home - not at work (where I am actually on the internal network).

  It's very frustrating.

  Can you please help?

  Check with this community: http://www.microsoft.com/office/community/en-us/flyoutoverview.mspx

• LDAP over SSL doesn't work is not between ASA and AD server

  Hi all.

  We have configured clientless SSL WebVPN portal on an ASA5525 using LDAP authentication with an ad server. All is well until what we enable LDAP over SSL to allow users to change an expired password. They get just connection error every time, even if their password is correct.

  The systems team have installed the necessary certificate on the AD server.

  The newspaper of the ASDM I get

  Joffrey.pcmtu.Keele.AC.UK marking AAA in aaa-Server CTU_LDAP04 group LDAP server down
  Marking AAA 172.16.0.10 LDAP server group aaa-server active CTU_LDAP04

  On the ASA, I get the debugging ldap following 255

  [50] starting a session
  [50] new application Session, framework 0x00007fffddc99a60, reqType = authentication
  [50] the fiber began
  [50] create LDAP context with uri = ldaps://172.16.0.10:636
  [50] to connect to the LDAP server: ldaps://172.16.0.10:636, status = failure
  [50] cannot read the rootDSE. Cannot contact the LDAP server.
  [50] output fiber Tx = 0 bytes Rx = 0 bytes, status =-2
  [50] end of session

  On the ad server, the systems team report TLS Fatal Alert Code 48 which is...

  Received a valid certificate chain or partial string, but the certificate has been refused because the authority , could not be located or couldn't be matched with a known, trusted CA. This message is always fatal.

  Can someone shed some light on where we need to look at.

  Thank you. Richard.

  Richard,

  This could be due to:

  https://Tools.Cisco.com/bugsearch/bug/CSCus71190/?reffering_site=dumpcr

  M.