Repeated loss of connection between Outlook and Exchange server

Similar Questions

• Localhost UDP connection between FCR and Matlab

  Hi all

  I have a question about the connection between Matlab and FCR UDP. My idea is to Exchange data between Matlab and Labview on the same computer.

  So I found the 'UDP Simple' of the FCR 2.0 sample project where periodically a datasample is generated randomly and sent to the remoteport 61557 local host. In the project a 'fractional number of string for transmission' is used for the transmission of data. The receiver of the sample project reads from the same port to receive the datasample.

  Now, I'm interested to read this simple stream from Matlab (just at first), however, it does not work and I'm not sure why. What I do in Matlab is the following (code Matlab)

  delete variables;
  u = udp ('127.0.0.1', 61557); % Of installation UDP Object
  fopen (u); open reading port %
  A = fread (u, 1);  % read an element
  fclose (u);

  With this code, however, I get a timeout by saying: "' WARNING: unsuccessful reading: the amount of data specified has not been returned within the time limit." "

  I'm not sure why this happens, maybe you could help me out here? I guess that the formet serving to VCF is not the same as in Matlab? Maybe the Terminators are not the same?

  See you soon,.

  Steve0

  Hey

  So, regarding the problem actually, I found the solution today. It was not the firewall, but a simple configuration in Matlab seting the UDP port. So the side of Matlab, to change the definition of udp object according to

  u = udp ('127.0.0.1', 'Thelocalport', 61557);

  If you have

  u = udp ('127.0.0.1', 'Thelocalport', 61557);
  fopen (u);

  A = fread (u)

  fclose (u);
  Delete (u);

  Who does the trick and you can read from the port. Then of course you say Matlab that you read from the "LocalPort" x, which I wasn't aware of.

  On the transmitter side, you simply:

  u = udp ('127.0.0.1', 61557);

  fopen (u);

  fwrite (u, '1');

  fclose (u);
  Delete (u);

  Here, you set just the port of transmiting.

  About the format of the data: I used the simple UDP protocol streaming Comms project where a random number is generated as a double, transformed into a string (ASCII values) and transmitted. At the level of the receiver, you get as much the UDP packet with the ASCII values that you must turn if you want to find the number.

  I hope this helps anyone having the same problem.

  See you soon

• Bluetooth connection between iPhone and iPad

  My iPhone 6 does not connect to my iPad via bluetooth.

  I previously used the bluetooth connection between my iphone and iPad to connect the iPad to the internet. Despite the two devices were among the recognized bluetooth devices and they were previously linked/partner, it was not possible to establish a connection.

  Perform the actions recommended for repair/reissue apple support - 1. Toggle bluetooth, 2. turn on/off the unit, 3. remove the iPhone/iPad bluetooth connections - 4. Reset network settings - 5. Reset all the settings-, nothing works.

  IPhone/iPad devices isn't even on the list of bluetooth devices available on the iPhone, or iPad. Everything that happens is the animated icon turns all the time.

  Deleting a connection to a device and bluetooth speaker/amp from the pairing of the speaker/amp system process made a new connection.

  iPhone 6:

  Model: MG4F2QN/A

  SN: C31NLG8KG5MR

  Version: 9.2 (13 c 75)

  iPad:

  Model: ME898LL/A

  SN: DLXM42LHFK13

  Version: 9.2 (13 c 75)

  Please give instructions for the previous maintenance work bluetooth connection between iPhone and iPad.

  Thanks in advance

  To use the Hotspot feature (that you described for the connection), you must use the instructions below.

  Share your Internet connection with Personal Hotspot - Apple Support

• Data impossible classic BlackBerry PIM synchronization between Outlook and classic

  I have problems to synchronize contacts and calendars between Outlook and my phone. I tried to uninstall and reinstall BB link but it doesn't give any help.

  As you use Microsoft Outlook 2016, I believe that Blackberry link has a compatibility issue with this version on the synchronization of contacts and calendars.

  System requirements: BlackBerry link for Windows

• Establish a persistent connection between client and server

  My application must keep in touch with my servers, the HTTPConnection gives the ablitity to make one request per connection. Then the HttpConnection might not make persistent connections in the BB. I think I can use Socket connections. I am wonding if some body can confirm that and give some sugustions how persistent connections between clients and servers.

  Thank you RexDoug and Marchywka. Your suggestions are appreciated.

• Link between Outlook and Adobe

  I think that the link between Outlook and Adobe Standard XI is broken. What should I do

  NICOS,

  Thank you for your offer to help but I managed to solve the problem, I reinstalled using Deil digital delivery.

  Thanks again

  Barrie

• dblink oracle to postgres with dg4odbc. ORA-28500: connection between ORACLE and a non-Oracle system returned this message: ORA-02063: preceding line

  Hi, I am creating the database link from a database of Oracle 11 g PostgreSQL with DG4ODBC and unixODBC

  My configured for /etc/odbc.ini

  [PostgreSQL]

  Description = Test to Postgres

  Driver = psqlodbc

  Trace = Yes

  Trace file = /tmp/sql.log

  Database = danieldb

  ServerName =

  UserName = SA

  Password = password

  Port = 5432

  Protocol = 6.4

  ReadOnly = No

  RowVersioning = No

  ShowSystemTables = No

  ShowOidColumn = No

  FakeOidIndex = No

  My configured for /etc/odbcinst.ini

  [ODBC]

  CommLog = 1

  Debug = 1

  FileUsage = 1

  Layout common = No

  Trace = 1

  [psqlodbc]

  Description = PostgreSQL ODBC driver

  Driver=/usr/lib64/psqlodbcw.so

  CommLog = 1

  Debug = 0

  FileUsage = 1

  My configured for /u01/app/oracle/product/11.2.0/xe/hs/admin/initPostgreSQL.ora

  HS_FDS_CONNECT_INFO = PostgreSQL

  HS_FDS_TRACE_LEVEL = 0

  HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbcpsql.so

  Set ODBCINI=/etc/odbc.ini

  My configured for /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora

  Listener =

  (ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521))

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = PostgreSQL)

  (ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe)

  (PROGRAM = dg4odbc)

  (ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/xe/lib')

  )

  )

  My configured for /u01/app/oracle/product/11.2.0/xe/network/admin/tnsname.ora

  PostgreSQL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521))

  (CONNECT_DATA =

  (SID = PostgreSQL)

  )

  (HS = OK)

  )

  I'm trying to created public database link:

  CREATE DATABASE LINK PUBLIC 'orapos' CONNECT to 'HIS' IDENTIFIED BY 'password' USING 'PostgreSQL ';

  When I used tnsping

  [root@oracle-poc admin] # tnsping PostgreSQL

  AMT Ping utility for Linux: Version 11.2.0.2.0 - Production on May 16, 2013 20:34:19

  Copyright (c) 1997, 2011, Oracle.  All rights reserved.

  Use settings files:

  /U01/app/Oracle/product/11.2.0/XE/network/admin/SQLNET.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521)) (CONNECT_DATA = (SID = PostgreSQL)) (HS = OK))

  OK (0 msec)

  and finally, I try to use the database link:

  "SQL > select * from tabel2"@orapos ".

  2;

  Select * from 'tabel2"@orapos '.

  *

  ERROR on line 1:

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  ORA-02063: preceding the line of ORAPOS

  What wrong with my setup?

  Thank you and best regards,

  Daniel

  Daniel,

  The problem is that you are using the ODBC Postgres driver for the HS_FDS_SHAREABLE_NAME parameter, but this must be an ODBC driver manager and not the driver ODBC Psotgres.
  Go to the.

  http://www.unixODBC.org/

  Click the 'Download' and follow the instructions to download the 2.3.1 pilot and make libraries and programs.

  Once this is done, then use the driver as parameter HS_FDS_SHAREABLE_NAME Manager, for example-

  HS_FDS_SHAREABLE_NAME =/home/odbc64/unixODBC/2.3.1/lib/libodbc.so

  Depending on where you install it.

  Kind regards

  Mike

• Open connections of hosts and vCenter Server Appliance

  We have number of ESXi hosts configured in our environment with vCenter 5.1, far ssh is open to all in order to access all hosts via SSH. Although authenticating the users available but, even then, the issue raises so bound / restrict administrators IPs or subnet of the network for security reasons. Will be the same for vCenter Server Appliance.

  Also can we restriction of IP level for the Vmware Client users, good that now everyone can make the connection between vSphere and vCenter cleint. Please advice

  Hi friend

  Please see below the resources needed to achieve the same on ESXi

  http://www.definit.co.UK/2013/10/vSphere-Security-Advanced-SSH-configurations/

  Restrict access to the ESXi host Console - see the lock Mode. VMware vSphere Blog - VMware Blogs

  Limit the vSphere Client access to IP or network - Firewall 5 ESXi & raquo; System administrators

• Ad hoc connection between XP and Android

  How can I set up a wireless ad-hoc, with shared Internet access, between a Windows XP computer (connected to Internet) and an Android device?

  Hello

  You can see the following link.

  How to create an Ad hoc network using Win XP

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network?SignedIn=1

  Note: also applies to Windows XP as well.

  Please provide us with more information on the Android device and the version of operation.

• Connection between servers and opening default home

  Question about cross-server logon, if a customer has changed their rules of routing so that the default value at the opening of "wishes" is no longer used and a different call handler is used instead, will be this connection between breaking servers? Looks like that connection between servers using backdoor functionality (# and some numbers) which works with the 'Opening of wishes' system, I understand this right?

  No, it is not hardcoded to opening greeting Manager of appeal, but he needs to finish a greeting (whether for a Subscriber or call handler) - the logic is handled in the PHGreeting conversation (the guy that is used for the treatment of the call manager/subscriber wishes) - so if you have a routing rule that say, load the sign the Subscriber in conversation, then you're going to break.

  But as long as the call is handled by _some_ greeting, the hand of logic should work because the conversation PHGreeting is looking for a specific series of TTS to indicate that it is a grip of calls.

• Connectivity between Interconnect and Nexus 2000 fabric options

  Hello

  I would like to know what models of fabric nexus 2000 Extenders can I use if I want to connect them to a pair of interconnections 6248UP fabric in a FEX deployment, so I can move between blade and rack servers service profiles.

  Thanks for your replies.

  Christian

  Christian,

  Take a look at this guide.  It should answer all your questions:

  http://www.Cisco.com/en/us/customer/docs/unified_computing/UCS/c-series_integration/ucsm2.0.2/b_UCSM_202_C-integration.html

  Kind regards

  Robert

• Connection between mac and PC

  Why can't connect between computers PC under Windows 7 and Mac computers on my network equipment?

  without knowing what you have tried and this error message you receive, impossible to
  say. site Web as http://www.wikihow.com/Add-a-Mac-to-a-Homegroup might help.
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• Network connections between VM and host is slow?

  I have problems with the speed between the host and the VM, connections is limeted and very slow. I'll open the file and copy and it's slowly. My OS is VISTA Business and VM on XP SP3. Connection between VM card is limited to me and see that trafficking is not very practical. If this can be rectified and speed up the connection between the virtual machine and the host.

  As I have written, you can use both at the same time. Just add a host connection only to the guest and make sure name resolution, host name (and the name of the client to the host) using the IP addresses assigned by DHCP VMWare Server for the host only (VMnet1, default) connection. The file "\system32\drivers\etc\hosts" ensures that this connection will be used, for example.

• Heterogeneous connection between Oracle and Postgres.

  Hi all
  
  I am trying to connect heterogeneous Postgres and Oracle for a few days, but I've always seen this error: "loss of the RPC connection.
  
  First of all: I use Windows 7, Oracle 10 g and PostgreSQL 8.4.
  
  I did the following:
  
  (1) create a system DNS named "PG". (The connection test is OK)
  
  (2) to create the file 'initPG.ora' in ' $ORACLE_HOME/hs/admin:
  # This is an example of initialization file of the agent that contains the HS settings
  # needed for an ODBC Agent.
  
  #
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = PG
  HS_FDS_TRACE_LEVEL = WE
  
  #
  # Required for the non-Oracle system environment variables
  #
  #set < varenv > = < value >
  
  (3) configure the file 'listener.ora' (in ' $ORACLE_HOME/NETWORK/ADMIN "):
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = CLRExtProc)
  (ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = PG)
  (ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
  (PROGRAM = hsodbc)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC_FOR_XE))
  (ADDRESS = (PROTOCOL = TCP) (HOST = Cédric-PC)(PORT = 1521))
  )
  )
  
  DEFAULT_SERVICE_LISTENER = (XE)
  
  (4) set up the 'tnsnames.ora' file (in ' $ORACLE_HOME/NETWORK/ADMIN "):
  XE =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = Cédric-PC)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )
  PG =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp) (HOST = Cédric-PC)(PORT = 1521))
  (CONNECT_DATA =
  (SERVICE_NAME = PG)
  (HS = OK)
  )
  )
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC_FOR_XE))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC_FOR_XE))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )
  
  (5) Finally, I create my DB-Link and test it:
  CREATE DATABASE LINK 'CENTRALE_POSTGRES' CONNECT TO 'user_login' IDENTIFIED BY 'user_password' USING "PG";
  
  SELECT * FROM 'dual"@CENTRALE_POSTGRES;
  
  I got this error:
  ORA-03135: interruption of the RPC connection.
  
  As you can see, I have activated the trace level (HS_FDS_TRACE_LEVEL = WE), but the still empty directory ' $ORACLE_HOME/NETWORK/trace.
  
  Any ideas?
  
  Concerning

  the alias PG tnsnames.ora is wrong — you must have 2 closing brackets after the so that HS SERVICE_NAME = OK is outside the CONNECT_DATA as:

  PG =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp) (HOST = Cédric-PC)(PORT = 1521))
  (CONNECT_DATA =
  (SERVICE_NAME = PG))
  (HS = OK)
  )

  You should know also HSODBC to release 10.2 was desupported since March 2008 and it was replaced by its product follow-up DG4ODBC V11

• Cann't open web access, ssh connection between host and bridged the VM in network mode

  I have a VMware workstartion 7.0 is installed on a machine XP 64 (192.168.2.44). I have the following virtual machines.

  1 ESX 4.0 (192.168.2.42)

  2 ESX 3.5 (192.168.2.38)

  3. windows server 2003 with vCenter installed. (192.168.2.100)

  4. Windows server 2003 with the roles of DNS and DC. (192.168.2.101)

  I am trying to connect to vCenter or ESX VM of the XP hosting web interface. However I can't get through. but I can ping and I can also telnet to ports 443, 80. Even I can't ssh connection. When I use putty, it is actually connected but no response from the ssh server. Looks like the network connection is there, somehow the server process responds simply not properly once the connection is established.

  BTW, all of them use bridged network, they all 192.168.2.x IPs. I can connect to vCenter, ESX web interface from another computer without problem.

  Just wonder if anyone else has experienced this before. I have tried to search the forum, did not find a similar question.

  Thank you!

  Tong

  Your host, try to disable (temporarily) a "discharge" for the NIC settings.

  http://KB.VMware.com/kb/1015940

  If this solves the problem, other threads on this issue have mentioned that a fix for this will be included in the next version of the 'point' of Workstation 7 (as 7.1, etc).