Media Foundation Protected Pipeline EXE stopped working
I just installed Vista Home Premium, with IE7 and WMP11. I tried to play an MP3 file and had this error - "Media Foundation Protected Pipeline EXE has stopped working." Farm of WMP11.
Any ideas what's happening? Any help is appreciated. Thank you.
Well, after days of messing around, I solved the problem on my system.
I use a motherboard with a pair of GTS8800s 680i I also had a Dual DVI card 7950 third PCIe slot. If I deactivate or remove the 7950 card I can play video in media player and media center. I took a little further. In addition, if I put ALL pci video (even a Quatro NVS 440 PCIe x 1 card) in the system, I get the same problem.
I removed the 8800 cards and put a pair of ATI cards in their place, as well as my 7950 card in the third PCIe slot, and everything works perfectly. Then, for fun, I put a pair of FX4500s in and no problem... Then, I borrowed my buddys FX4500x2 pair cards (8 GPU) and put a straight FX4500 in third place and still, no problem.
I think that the question (at least in my case) is related to the presence of a map of 8800 with ANY other card in a slot 1 x PCI, PCIe or REVISE.
Not sure if this will help anyone of you out there, but it worked for me.
concerning
J.
Tags: Windows
Similar Questions
-
TosSmartSrv.exe stops working when you start up Vista
TosSmartSrv.exe stops working whenever I start my computer (Vista)
What is this file, and what I can do to resolve the situation?
I have a new Satellite Toshiba Quad Core and have not seen this message on my old Toshiba Satellite.
Hello
Toshiba Satellite Quad Core says nothing about your model of laptop so what model you have exactly?
I tried on my laptop for this file, and it seems that it is for the utility alert SSD HARD drive. It s stored in this directory:
C:\Program Toshiba Toshiba HDD SSD AlertIn your case, I would try to reinstall the utility. I also checked the Toshiba page and there you can download. Just search your laptop model on the driver download page and you will find! ;)
Welcome them
-
CAgent32.exe stopped working and was closed at the start of windows.
Original title: CAgent32.exe stopped working and was closed
Whenever I start my computer a Windows tab will appear that reads CAgent32.exe stopped working and was closed? How can I fix it? Thank you
Hello
1. what happens when you try to uninstall or disable the program?
2. you receive messages or error codes?
3. have you made a recent software or hardware changes to the system?
You can read the following article and try to run the Fixit and check if it helps.
Diagnose and solve the program installation and uninstallation problems automatically
-
at startup I get the error message that the gamevance.exe stop working
original title: gamevance.exe for vista
at startup I get the error message that the gamevance.exe stop working, I went to start to delete, but do not have the option to remove it.
Hi JoAnneKimmey and pugmolly,
When looking for this, it seems to be malware, so I'll include a link to a useful thread in which you can find a solution:
-
Original title: the printer does not work
Cannot print from any application. Get pop-up Microsoft that says: "print filter Pipeline host Stopped Working and was closed.
Ron BakerSA,
Try to read This THREAD
Rick
-
mysqld.exe stopped working and was closed
Whenmy computer starts, I get and error message "mysqld.exe stopped working and was closed". What is the solution?
Hi vinaypahwa,
Looks like you have an unwanted program that loads when Windows starts.The solution is to disable this program of commissioning by performing a clean boot:You can also manually check which starts up by looking at the startup of the System Configuration dialog box tab and disable what you do not want to start.I hope this helps. -
Launcher main exe stopped working so my logitech webcam does'nt work, what can I do?
My webcam logitech 170 does'nt works because Launcher main exe stopped working what can I do about it?
There are a number of discussions in Logitech forums at the topic "main Launcher" (not sure whether an any of them will be useful): http://forums.logitech.com/t5/forums/searchpage/tab/message?location=Board%3Aquickcam_software&q=launcher+main#message-list
Logitech product support can also help: http://www.logitech.com/en-us/support-downloads?debug=0
-
Media Center on Win 7 "stopped working".
Bought this new computer with Win 7 in July, 10. Media Center has worked, (like my old pc) until this last week. Yet the recordings of TV programs I get RoadRunner cable, but won't let me play same. I get the msg: WMC has stopped working. The choices are "to search the solution over the internet" and "close". That I see, nothing happens when I select the first Pope and WMC turns off. MSG, basically, has the following listed (?): CLR20r3, ehshell.exe, 6.1.7600.16385, 4a5bccdc, mscorlib, 2.0.0.0, 4bebd50b, f50, 7, N3CTRYE2KN3C34SGL4ZQYRBFTE4MI3NB, 6.1.7600.2.0.0.768.3, 1033 (hope, I just copied correctly - what it means).
I was able to play a few shows previously recorded by restarting the pc, then selecting a show and play. Three light like that, but now I can't screen "msg".
I think MC is still able to record. I always get the guide, live tv, etc. At least the last time I tried the ones I did.
But I can't play what has been saved!
If anyone has a solution, please send me an email to * address email is removed from the privacy * that an ad has been filed.
You has not, coincidentally, happens to record last Friday (I think it is?) episode of human target (what happened to be replaced by a House reruns), did you?
Reason I ask: it has been a little traffic on to thegreenbutton on the subject these days - and everyone who reported also arrived to try to save human target. Somehow, the file finished with metadata is corrupted, what makes MC crash when you enter recorded TV (at best, it crashes when you select the program from the list.)
FIX: Open Explorer and go to C:\users\Public\Recorded TV. Find and remove "human Target__ "(exemple: «La Target_WDIVDT_2010_10_01».) ".
Start Media Center, and then try again. Fixed?HTH,
ChrisMS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
Help! Whenever I send an email from my Hotmail account I get a message that the WebKit2WebProcess, exe has stopped working and the program closes and opens again, then - why? Maybe what I need to do, it is to disable and depend on my protection to protect my computer from viruses. In one, even if this is very frustrating!
Hello
I'm sorry, but we cannot help with hotmail problems in these forums in response to vista
Please repost your question in hotmail in the hotmail link below forums
http://windowslivehelp.com/product.aspx?ProductID=1
ForumsConsult with Microsoft Certified Solutions____________________________________________For the different Forums for Windows Live Applications, select the link belowWelcome to Windows Live Solution Center -
Reg.exe stopped working on windows 7 64 bit when I want to play an old game.
Hello guys. I am using windows 7 Home premium 64-bit in my laptop. I just downloaded an old game (2005-2006 perhaps) so I wanted to play. After finishing download (no virus, I checked), and I run the executable files, the message occurred: Reg.exe has stopped working. and the game does not start.
The game has an application inside reg.exe file, and I think I have to run it manually. but when I tried to run it, the same message is produced.
This is the error log:
Signature of the problem:
Problem event name: BEXApplication name: reg.exe
Application version: 0.0.0.0
Application timestamp: 44eeabe9
Fault Module name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 0018fedb
Exception code: c0000005
The exception data: badc0de1
OS version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information 1: 0a9e
More information 2: 0a9e372d3b4ad19135b953a78882e789
Additional information 3: 0a9e
Additional information 4: 0a9e372d3b4ad19135b953a78882e789I already asked in a computer forum, but they said that it is the problem of the ILO. and I read in microsoft help, the reg.exe will not run under 64-bit windows. I read the conclusion, but this isn't for windows server 2003, Windows 7. It says that I have to type reg query \\64server\HKLM\software/reg: 64 or if I want to change it to 32 bits reg.exe, I need to replace the reg: 64 by reg: 32.
Will there be another conclusion of this problem instead to install the 32-bit operating system?
What about XP mode for windows 7, it'll work?
Help me please... Thank you very much.
Best regards
Hi Liclac,
· What is the name of the game?
Check if the game is compatible with windows 7, you can see the ink below:http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
If the game is not compatible then you can try to run the game in compatibility mode or in windows XP mode.
Try to run the game in compatibility mod and check if the error occurs again: make sure to run older programs in this version of Windows:http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
All the Windows media player play function has stopped working
Original title: windows media player
My system is Vista service pack 2. Recently, I've noticed that when my music on media player. Play all function has stopped working as before. It will not go forward or backward unless I type in the artist on my search bar. Is there a setting that went wrong and a simple solution, please. I don't know noty when it started to do that I have such a big library I use mostly the search bar. But I would like to play them all when I scroll to the bottom of my list of the library. Yours if fine!
Hello
· Are you trying to use play all the features in Windows media player or Windows Explorer?
· The option is available on the details pane or the playlist?
I suggest you follow the steps mentioned below:
Method 1:
Race he difficulty of the link and check if the problem persists:
http://support.Microsoft.com/mats/windows_media_player_diagnostic/
Method 2:
If you use Windows play explore all the functionality, you can run the System File Checker tool to troubleshoot missing or corrupted system files and check if the problem persists:
http://support.Microsoft.com/kb/929833
Method 3:
If the previous step fails, follow the steps in the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player
-
After the error message with computer-media center Scheduler etc has stopped working
Original title: 8 boxes
On separate cards on top of each other - they look like maps of correspondence-is this news centre Media State media stopped services aggregator, the drawer module igfx has
order, hkcmd module has ceased, HD audio Panel has stopped working, Task Scheduler engine stopped working, a persistence module
stopped working, sink to receive asynchronous callbacks for WMI client applications has stopped working. They appear after the computer was during one
While using the Internet, Facebook, please help.
Hi sue them.
· Did you do changes on the computer before the show?
· Exactly when you receive the following errors?
· What web browser do you use?
Follow the suggestions below for a possible solution:
Method 1: I suggest you to start in safe mode with network and check if the similar problem occurs in safe mode.
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Method 2: Try the SFC (System File Checker) scan on the computer.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
I hope this helps.
-
Viewer.exe stopped work and why is it happening?
App crashes/viewer.exe has stopped working message appears
Hello
· What application are you trying to run?
· Did you change to the computer?
· Since when are you facing this problem?
Method 1:
Please check the observer event log and search for the application that is causing the error, uninstall and reinstall the application. For more information on event viewer, visit the link below.
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
Method 2:
I suggest to start in safe mode and check the number. Forward if the bottom of the article.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Method 3:
You can also put the computer to boot and check if it helps. To put the computer in a clean boot, follow the article below.
http://support.Microsoft.com/kb/929135
It will be useful.
-
Vista MCE Media Center/Center Receiver Service stopped working
With the K-world Twin DVB Tuner installed, during one scheduled live TV and all recording watching another channel, Vista MCE stops working and must be restarted which prevents finished recording.
Here's the report:
Signature of the problem
Problem event name: APPCRASH
Application name: ehRecvr.exe
Application version: 6.0.6001.18000
Application timestamp: 47919dfb
Fault Module name: ntdll.dll
Fault Module Version: 6.0.6002.18327
Timestamp of Module error: 4cb74dd3
Exception code: c0000374
Exception offset: 00000000000aca57
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Are there any solutions please?
Hello, tbnewbi
What service pack you have installed?
Find out by going to start, right click computer and select properties and in the Windows edition section, it must be said that if you have Service Pack 1 or 2 installed.If you have not installed Service Pack 2, install it and test if the problem persists:http://support.microsoft.com/kb/935791#Method3
If you have Service Pack 2, download and install the latest drivers from the website of K-world and see if the problem persists.
David
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Error Message ext2ini.exe stopped working
Try to import an EEG of watchguard VPN policy that the follwing error ext2ini.exe has stopped working.
Have reinstalled the software of watchguard, disabled antivirus software run malware etc the watchguard software seems to work very well but this error as soon as you try to load policy VPN does anyone know what to refers to?Here's a link to something on this file: http://spywarefiles.prevx.com/RRJIEA44996288/EXT2INI.EXE.html. I don't know, but it may be malicious. Try the free scan on this site to see if it's been updated for a better explanation and try to run some other malware detection programs to see if it is detected as a problem. You can try to download a pandasoft trial edition (www.pandasoft.com) good for 30 days and see how she responds: this is IMHO the best program for the research of malicious software out there. You will have to perhaps disable or uninstall your antivirus/antispyware software to install because these programs tend to conflict with another (but do not unless it gives you a problem).
I hope this helps and I hope that this isn't really malware but just a file valid who was not properly identified (even if it prevents you from importing).
Maybe you are looking for
-
How can I find out about version release before their release?
In my business, we would like to be notified of the weeks beforehand a next version. Is there a mailing list I can be added to this would facilitate this type of notice before the software is released? Thank you
-
Why can't I have the titles on my photos on my iPad IOS?
First of all, I would like to apoligise I know it's in the wrong forum I can't find the IOS community anywhere That said, nobody knows why titles for the pictures are supported in IOS I have hundreds of pictures that make no sense on my iPad I can't
-
Help! Lenovo Diagnostic CD Bootable kernel - panic
When I try to run the CD bootable diagnostics of Lenovo on my T420s, I get the following error: "Kernel panic - not syncing. The CD fails to start little matter what I do. Other work of bootable CD fine linux (for example, Clonezilla, Ultimate Boot C
-
How big can be microsd with sansa e250 v1
Hello I want to develop my sansa with a microsd card as much as possible. is there a size limit? the device is v1 and running rockbox. Thanks for your advice, Moony
-
french accent alt key codes no longer works
My french accent alt codes no longer work. For example, alt 0244 should give me a with a grave accent. now, he's giving at the corner of a square! I tried to restart the computer, which usually fixes these problems; that did not work.