Reg.exe stopped working on windows 7 64 bit when I want to play an old game.

Similar Questions

• Explorer stopped working under Windows 7 64-bit

  SOS

  Explorer has stopped working (Windows 7 64 bit TouchSmart 520), it crashes from time to time and the rail of the screen and I can not do or move with the mouse until ' in that it restarts Explorer nothing. And PC and a slow opening nearly two minutes to get a home, then 50 seconds pour office to the Windows Get. Thanks reloaded

  sincerely

  ***************************************************************************************************************************************

  Hello

  Explorer of the Nations United continues to work (under Windows 7 64-bit TouchSmart 520) it blocks from time to time and tout the screen and block I can so do or move with the laetitia until it restarts Explorer.

  And the pc and lent a L'Ouverture almost two minutes pour get one THEN welcome 50 second pay the arriving to the Windows desktop.

  Thanks for help not CDL

  Double post / Double post

• Visual studio 2005 application stopped working after windows 7 32 bit OS update to service pack 1

  Hi support them.

  I did tutor which is used to record the Windows Application to the learning process. It is a 32-bit application that works fine in Windows XP and Windows 7 32 bit OS operating system. But after the upgrade of Windows 7 Service Pack 1, it doesn't now. When we try to record something, it's giving the guardian has stopped working and program disappears.
  Any product from Guardian:
  1. it is a Visual Studio 2005 application.
  2. in execution of tutor, turn us the key to register PEHOOK.
  3. some of the DLLs we use are: Interop * and other user defined dlls.
  4. it can be used to record any application Windows 32 bit OS.
  When searching I got a solution in the forum:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/application-has-stopped-working-error-on-Windows7/82b6fbcd-ABA7-49e5-833d-51ce42e6ef42
  But after installing it too, the problem exists.
  Could you please help me solve this?
  Thank you very much in advance.
  Best regards
  Manu.

  Hello Manu,

  Thanks for the updates.

  Since then, enforcement, guardian, uses Visual Basic, please post this question in the Forums of Visual Studio for assistance.

  If you have any other questions about Windows operating systems, please get back to us.

• Satellite L550 - Flash cards stopped working after Windows 7 64 bit repair

  I tried to install/reinstall/uninstall and then install again, utility support Toshiba Value added Package and flash cards. No luck...
  Utility of flash cards is installed: [https://dl.dropbox.com/u/3002908/Capture.PNG]
  What now? :)

  Laptop model: L550-15F (PSLN4E)

  In addition, nobody knows why the search for drivers for my model pack battery bluetooth but my model does not appear to have bluetooth? :)

  Hello

  Wait a minute, please! Order in which you have installed/reinstalled the Flash Cards Support utility and value added package? It would be interesting to know what you did exactly.

  I used the following to this problem repair order:
  I uninstalled the Flash Cards Support utility and then added value package. I did a restart and cleaned the system using CCleaner. A restart more and I installed the package value first and Flash then cards support utility. Now, I've done the last restart and the FN keys started working!

  It is important to install the new versions for Windows 7!
  This means that cards Flash Utility version 1.63.0.4 and 1.2.34_64 version VAP Support. I founded both on the Web from Toshiba site :)

• Internal card reader & USB ports stop working in Windows 7 64 bit - HELP

  This seems to be VERY popular problem between Vista and 7 users. I can't find the right difficulty any where. I have a HP Pavilion of D5200T running Win 7 Home Premium 64-bit. (I can provide more specific if necessary specifications). I read a few other posts in this forum with exactly the same problem as me, I tried the suggested fixes - most of them anyway - and my problem persists.

  This is the story of the kind: bought PC Cognac nine in June 09. It came with Vista Home premium 64-bit. On the front panel, I have the HP 15 in 1 reader cards and below that another panel with micro/headphones, 2 USB ports and 1 port Firwire catches. They all worked great worked great, no problem at all. I bought Windows 7 and improved in October 09. These two USB ports and card reader have been in place since then. I turn on the computer or restart works and they. Slide into a car SD, CF, whatever it is. Little green light turns on, windows automatically opens on the screen indicating the contents of the card.

  The card reader is no longer everything first. It may be 15 minutes later, perhaps hours. I slip on a map and still get the little green light but nothing on the screen. As if no card has been inserted. 2 USB ports will do the same thing, just much less frequently. I step a USB item and I have an error message saying: is not recognized or not installed properly. If I restart - they are all back to work very well.

  So... this problem only started after the Windows 7 installed, then it is clear to me is where the problem lies. When card readers or USB is in their State of non-working, I'll go to Device Manager and see that they are always listed, and there is no indicator of errors.

  This is what I remember by train so far, without success. I uninstalled devices from the Device Manager, driver too. I tried unplugging them from the card, restart, reconnected, reinstall. I tried different plugs on the motherboard. I can't find the latest drivers. The courses are MS 21/06/06 6.1.7600.16385. I think I tried all utilities integrated in Win7 to try and diagnose, and none of them produced no results. I tried to disable the sleep function. I even reached out to HP support, and the best they have resulted so far is that the card reader is bad. They are sending me a new, but I do not think that this problem will be solved.

  As I said, I see this problem or similar to many, many forums but I have rarely seen a happy ending where it was fixed. Someone at - it the key? Help, please.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• PSC 2115 all-in-one has stopped printing under Windows 7 64-bit.

  Faced with the driver for PSC2115 which stopped working under Windows 7 64-bit. Problem is that this printer is old, but still in excellent condition and prints of cracking.

  Used the HP trobleshooters to exhaustion. It shows that the printer is ready, but prints just stuck in the print queue and outputs nothing.

  The message of the alignment of the cartridge is also high at all times, but it do not line up when you press on enter.

  Hi G-Force,

  Here is a link to an excellent tool that can help narrow down and solve your problem:

  HP Print and Scan Doctor

• CAgent32.exe stopped working and was closed at the start of windows.

  Original title: CAgent32.exe stopped working and was closed

  Whenever I start my computer a Windows tab will appear that reads CAgent32.exe stopped working and was closed? How can I fix it? Thank you

  Hello

  1. what happens when you try to uninstall or disable the program?

  2. you receive messages or error codes?

  3. have you made a recent software or hardware changes to the system?

  You can read the following article and try to run the Fixit and check if it helps.

  Diagnose and solve the program installation and uninstallation problems automatically

• HIDData.exe has stopped working in Windows Vista SP2

  I am running Windows Vista w/SP2 on a Compaq CQ70 w/an Intel T3200 2.0 ghz processor. I recently installed a USB Bluetooth device. I get the error "HIDData.exe stopped working" reported before with a USB Bluetooth mouse. Every avenue, I used to try to find a solution show KB941600 cumulative update installation. However, when I started to install the update, I learned that it is applied to a different operating system than the one on my computer. I guess that's because it applies to Windows Vista without SP2 installed. Is there a way to solve this problem for the updated Vista version?

  Hi IXOYE4Us,

  This error may occur due to the old version of the HP Quick Launch Button software. If you have installed a HP Quick Launch toolbar, then you can try to disable the toolbar HP Quick launch at startup or uninstall it and check.

  You can try to perform a clean boot and try disabling the HP Quick launch at startup toolbar.

  For more information about execution of boot, you can consult the following link:

  http://support.Microsoft.com/kb/929135

  You can also view the following link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• EHP.exe has stopped working under windows. custody arise and asks him to close the program.

  Microsoft Windows

  EHP.exe stopped working.a problem caused the blocking of the programme of work correctly.windows closes the program.

  How to solve this.

  Thank you

  It seems to me be Malware or a left during the start-up stilll input there.

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If after scanning, you still have problems with it, use the program below to remove the boot:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• mysqld.exe stopped working and was closed

  Whenmy computer starts, I get and error message "mysqld.exe stopped working and was closed". What is the solution?

  Hi vinaypahwa,

  Looks like you have an unwanted program that loads when Windows starts.
  The solution is to disable this program of commissioning by performing a clean boot:
  http://support.Microsoft.com/kb/929135
  You can also manually check which starts up by looking at the startup of the System Configuration dialog box tab and disable what you do not want to start.
  I hope this helps.

• TosSmartSrv.exe stops working when you start up Vista

  TosSmartSrv.exe stops working whenever I start my computer (Vista)

  What is this file, and what I can do to resolve the situation?

  I have a new Satellite Toshiba Quad Core and have not seen this message on my old Toshiba Satellite.

  Hello

  Toshiba Satellite Quad Core says nothing about your model of laptop so what model you have exactly?

  I tried on my laptop for this file, and it seems that it is for the utility alert SSD HARD drive. It s stored in this directory:
  C:\Program Toshiba Toshiba HDD SSD Alert

  In your case, I would try to reinstall the utility. I also checked the Toshiba page and there you can download. Just search your laptop model on the driver download page and you will find! ;)

  Welcome them

• Error when you try to use VoIPBuster to place VoIP calls: Client for VoIP calls has stopped working. Windows is checking for a solution to the problem.

  Client to make VoIP calls

  I recently started having problems, make VoIP calls from my computer.  I use VoIP Busters (and using it for a few years without any problems).  Evertime I try to call the destination phone rings a couple of times and then stop.  The next thing that happens is an error message that says: "Client for VoIP calls has stopped working.  Windows is checking for a solution to the problem.  It is followed by another screen that says: "a problem caused blocking the program working properly."  Windows will close the program and inform you is a solution available. "  Nothing happens.  How to overcome this problem.

  I finally had to resort to the re-installation of Windows.  This solves the problem.  But don't forget to back up your computer and email address / addresses before you do.

• My administrator password stopped working on windows vista

  original title: administrator password

  My administrator password stopped working on windows vista... What can I do?

  Hi impathunt,

  See the article mentioned on the Microsoft Policy below we lost or forgotten the password.

  http://support.Microsoft.com/kb/189126

  For reference:

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  Keep secure passwords - Microsoft strategy on move the passwords

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd

  (Refer to the suggestion given by BillFill dated dated December 14, 2009)

• at startup I get the error message that the gamevance.exe stop working

  original title: gamevance.exe for vista

  at startup I get the error message that the gamevance.exe stop working, I went to start to delete, but do not have the option to remove it.

  Hi JoAnneKimmey and pugmolly,

  When looking for this, it seems to be malware, so I'll include a link to a useful thread in which you can find a solution:

  How to get rid of malware

• Skype has stopped working and windows is looking for a solution.

  original title: problem with Skype

  I have been using Skype on my laptop for 12 months with no problems, all of a sudden, I get a message that Skype has stopped working and windows is looking for a solution.  I checked my firewall, windows updates and downloaded Direct X, as suggested by Skype. I've uninstalled Skype and downloaded again to make sure that the version lasted. IHAVE had also my whole system recharged but it did not work. I am at a loss to know what to do next. Someone at - it ideas

  Hello
  
  It is a possibility that a third-party application is causing the conflict with Skype. We can perform the clean boot troubleshooting and check which program is causing the conflict.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.