Memory and accidents Pre9

Hello

I am 90% done with a video that lasts about 20 minutes. It contains video and photo images. I can't finish the project because pre crash I think because of the memory. My machine is XP with 4 GB of RAM.

I took the recommended steps. All my photos have been reduced to 1000 X 750, then placed in a slide show (from Organizer). I have reset my virtual memory settings 4 GB and 8 GB (maximum). I was a bit confused because I put my C and D HARD drives on these settings and I'm not sure that Windows uses for virtual memory.

I can only work for about a minute before the system seems overload then crashes. I'm in a bit of trouble with this and would appreciate any help. Thank you! Stan

When the PrE hangs or crashes, I folk point to this ARTICLE. He begins with a checklist to get a computer set up for pre, then goes into setting to the top of the OS and computer, and finally has many links, which are very useful for troubleshooting. I'm starting to run and work through the three sections of the article.

Good luck

Hunt

Tags: Premiere

Similar Questions

  • Safari 9.0.3 opens chewing memory and accidents

    Every since OS X Yosemite I had a problem with Safari Version 9.0.3 (11601.4.4).

    At the opening, he starts chewing gigabytes of memory, both until my system becomes unstable and I have to force quit Safari.

    It's my current system:

    Model name: MacBook Pro

    Model identifier: MacBookPro9, 1

    Processor name: Intel Core i7

    Processor speed: 2.3 GHz

    Number of processors: 1

    Total number of Cores: 4

    (By heart) L2 Cache: 256 KB

    L3 Cache: 6 MB

    Memory: 16 GB

    I removed all extensions and disabled plugins, but it doesn't seem to help.

    Any suggestions?

    Thank you

    Run EtreCheck and post the report here.

    http://etresoft.com/etrecheck

    Download, open the download folder, click on it to open it and select 'open '.

    Select a problem from the menu popup box "Choose a problem", then "Start EtreCheck" in the dialog box.

    Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

  • Safari feeds all THE memory and accidents

    16 GB of memory on an iMac. El Capitan. Safari 9.1. Removed all extensions/plug-ins. Nothing automatic charges. Launch Safari, and 10 minutes later he has monopolized all the memory. Running the CPU at 110% from end to end.

    Safari/Preferences/Advanced - activate the menu to develop it, then go ahead and empty Caches. Quit/relaunch Safari and test. Then try Safari/history/Show History and remove all items from the history.  Quit/relaunch Safari and test. You can also try try Safari/Clear History... The downside is that it deletes all cookies. It could upset some sites no longer recognizes your computer as one that has visited the web site. Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select Library./Caches/com.apple.Safari/Caches.db, and then move it to the trash.

    Go to Safari preferences/Extensions and disable all extensions. Test. If correct, enable the extensions one by one until find you which extension is causing the problem.

    Corruption Safari       See post by Linc Davis

  • My calendar retains the events for a month, but when I look back over the past months, only recurring and default events are preserved.  I have a bad memory and I want that all events held on my calendar.  How can I do this?

    My calendar keeps events a month, but when I think back several months, only recurring and default events are preserved.  I have a bad memory and want to keep all the events, I put on my calendar for a year.  How can I do this?

    Go to settings > Mail, content, timing and you should see an option for synchronization. Make sure that you put in all the events if you want to keep past events calendar

    Alternatively you can also use iCloud.com to restore calendar events that may have been accidentally deleted

    If you've accidentally deleted your calendars, reminders, or contacts of...

    I hope this helps!

  • I was on Redbox and accidentally disabled the part location function. How to re - activate this?

    I was on the site of Redbox and clicked on DVD to find nearby and accidentally disabled the part location function. Anyone know how I can reactivate this function?

    You can also check specific permission settings by using the permissions of the Page Info dialog Committee. While on the site, you can call this using one of these:

    • Right click and select View Page Info > permissions
    • (menu bar) Menu Tools > Page Info > permissions
    • Click the icon of padlock or globe to the left of the address of the site > additional information > permissions

    Scroll down and look for "access your location. If it is set to block and you want to enable it, you can make the change. (If necessary, uncheck the box to activate specific use default settings.)

  • I was watching Hulu (TV and movies) and accidentally pressed the "block", ABP (AdBlock Plus) block now all programming to Hulu. What should I do to get Hulu

    I was watching Hulu site and accidentally hit the "block" tab located at the top right of the window open for Hulu. I am now unable to get access to the programming of Hulu. I'm assuming that ABP (whitelisted) blocks now all programming to Hulu. How can I correct this problem and put the Hulu programming on my computer. I use a MacBook Pro, 10.9.3.

    You should find Hulu in Ad blocking rules or rules hidden element list.

    Can you post a screenshot?

  • I have an iMac OSX 10.8.5 2008 30.6 GHz Intel Core 2 Duo Processor with 4 GB 800 MHz DDR2 SDRAM Memory and 1 t HD

    I have an iMac 24 "Early 2008 OSX 10.8.5... 30.6 GHz processor Intel Core 2 Duo with 4 GB 800 MHz DDR2 SDRAM memory and 1 t HD.  Can I upgrade the processor speed and if so what.  Can I upgrade the memory and if so what.  I launched iPhoto ' 08 7.14.  Any input would be great.  Thanks for your help and suggestions.

    You can actually move the ram to 6 GB.

  • How to take movies on my macbook air to free up memory and still access those I downloaded from iTunes?

    I want to free up the memory on my macbook air and have 65 GB of movies hogging the space. I don't want to lose them forever if you want to know how I can free up memory and again back to the film at some point in the future.

    If they were purchased through iTunes, you can download again them at any time.

    However, there is no way to stream movies, so you have to download the entire file again for a movie.

    Open iTunes > iTunes Store > purchased (on the right side of the window) > movies.

    Make sure that the sort is set to "Not in my library" If you try to redownload something that has been removed from the computer.

  • I want to upgrade to El capitan, but need to 8 GB memory and now have only 4.  How much would it cost to add 4 GB of memory?

    I want to upgrade to El capitan, but need to 8 GB memory and now have only 4.  How much would it cost to add 4 GB of memory?

    It depends on what Mac model you have and is not possible for all models. Go to the website of OWC or Crucial and check.

    (141711)

  • I have a macbook pro 15 "model 9.1 4 GB of memory and want to extend to 8 which is the model of memory should I buy for my fastest machine, I have for several years.

    I have a macbook pro 15 "model 9.1 4 GB of memory and want to extend to 8 which is the model of memory should I buy for my fastest machine, I have for several years.

    See:

    http://eShop.MacSales.com/shop/memory/Apple_MacBook_MacBook_Pro/upgrade/DDR3_160 0MHz_SDRAM

    Get only the memory of a place as above, since Macs are picky about the memory. Another place is crucial.

    If you can't swing for 16 GB (2 X 8 GB) replace a strip of 2 GB with a key of 8 GB.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Memory and disk HARD upgrade question - Satellite 5200 801

    Hi all

    I really need your help to upgrade my toshiba Satellite 5200 801 (model: PS520E-31P1D-EN), basically it's the version specification factory (technical instructions on the link below)
    http://www.cwrose.de/Toshiba/S5200.html

    What I want is to get faster internal memory, you can buy for this model (currently I have two default 256 mb DDR 266 MHz CL2.5 memory sticks). Will probably do a gig of memory (I could have more, but it depends on the price).
    As well, I want to spend the HD to 160 gig (about), as well as get a faster hard drive then the current 60gig 4200 RPM Hitachi HD (as soon as possible for the specifications of my laptop).

    Anyone know what would be the best option?

    Someone said that it would cost all under 100 (that would be cool), but I don't know anything about the compatibility of different companies etc.
    Can anyone recommend what equipment... .and where * I hope that ebay or studs :)
    I need to go to get this sorted out

    PS:
    FYI, I mostly use the laptop for graphic design, video, and the interwebz.

    Thanks for any help you can give!
    Andy123n

    Hello

    You can upgrade the Satellite 5200 801 memory and HARD drive.
    S for laptop computer memory can be improved up to 1 GB of RAM. So you can use 2 x 512 MB PC2100 DDR - RAM modules.

    Check this link 5200-801 Satellite:
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6116&ft=m&St=3

    In my opinion, you can use the modules of memory from different manufacturers, but the module must support these specifications: 200-Pin PC2100 (266 MHz) DDR SODIMM
    I suppose you could also use a 400 Mhz because the laptop supports a 400 Mhz FSB too.

    I think that an upgrade of the IDE 160 GB HARD disk is not possible. To my knowledge, the BIOS can support such massive size of the HARD drive. But this is only my personal opinion. If I was you I would try a smaller HDD like 100 GB or 120 GB.

    Concerning

  • Can I change the new memory and at the same time to replace the Rams?

    Can I change the new memory and at the same time to replace the Rams?

    If a MacBook Pro RAM and drvie hard can be modified/improved depends on the submodel and we do not know yours. There are dozens of variations of the MacBook Pro issued since 2006, and you do not want guessing us!

    Please do "about this Mac" in your Apple menu to get this:

    Notice the line that I have highlighted with the red arrow. Please tell us what your computer has in the thr same place. However, do not post any serial number.

    With the exact submodel we can better advise you of any available upgrade paths.

  • Can I replace the memory and not lose what is on the old memory for a Mid 2007 Mack computer desktop Intel Core 2 Duo, 2 GHz processor speed, 1 CPU, 4 MB of Cache L1, the 4 GB memory at 800 MHz bus speed.  Only 1 slot can play memory, the other is damaged

    Can I replace the memory and not to lose what's on the memory of the former?  I have a Mid 2007, 20 "desktop Mac, Intel Core 2 Duo, 2 GHz processor, 1 CPU, 4 MB L2 cache, 4 GB of memory, 800 MHz bus speed.  I have a backup device.  A RAM slot is damaged.

    You are confused of RAM and disk space available.

    RAM stores information temporarily while the Mac is enabled and the application is reached. RAM replacement has no effect on the long term of your information storage.

    The hard drive is where your information is stored in the long term. If you replace your hard drive, you need restore the information from a backup.

    FYI, for your iMac, the maximum RAM is only 6 GB.

  • I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

    I change the settings of firefox and accidentally closed on the display tab, which displays the files, settings, and tools. I can't see how to reset it back to default where I can see those?

    You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
    Press in and hold the Alt key to display the menu bar.
    Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select the toolbars to show or hide.

    See also what happened to the file, edit and view menus?

  • I have osx imac 10.9.5 version and can't use iCloud told me to go to the yosmite should I do this and how do I know if I have enough memory and it won't slow down my computer

    I have osx imac 10.9.5 version and can't use iCloud told me to go to the yosmite should I do this and how do I know if I have enough memory and it won't slow down my computer

    If your iMac can run a newer operating system, it will not let you install. Where possible keep updated for better security.

Maybe you are looking for

  • There is no connection to the server

    for a week, I'm trying to install Skype on my pc (3, 8 - 5.5 version)... whenever there is a text "he has no connection to the server" when I start Setup package.i am not so good with the pc, I live in Bulgaria and I just want to know is there a prob

  • W510 doesn't wake up when she goes to sleep - Bit from Windows 7

    Hi all The Lenovo thinkpad w510 won't wake once she goes into sleep mode, I have to press the power button until it stops completely and restart completely, I tried different settings in the management of food etc. We have the same pissue on 3 differ

  • for HP CQ61Z-300 laptop repair tools

    Hello I'll try to find a tool tiny laptop repair value mentioned in the subject line (but of course would be used for other small bolts, screws etc. on any notebook computer).  Prefer a toolset that has been magnitized and had some sort of holding to

  • Officejet 4635 scan quality

    Hi, I just bought an Officejet 4635 to replace my old Photosmart D110. Everything is connected and working, but I'm a little disappointed by the quality of the scan. I regularly need to scan documents to PDF format, then send the service of fax, whic

  • Scan to email on my HP8500A

    I would add to; delete; change the list of recipients of e-mail on the control panel of my HP8500A.  Get a message saying that the address book is full and cannot delete one of them. It is a great feature - but need to update addresses.