memory card reader, do not read any card I have a pavilion dv6 laptop 3236nr any ideas?

Similar Questions

• I have a Pavilion dv6 laptop and I want to upgrade the graphics card

  I'm the product: HP Pavilion dv6t - b 6, 00 CTO Quad Edition Entertainment Notebook PC

  Product number: QJ912AV #ABA

  Operating system: Windows 7 Home Premium (64-bit)

  Graphics factory-installed: Radeon HD 6490 m + Intel(r) HD Graphics Family (but I spend the Intel 3000 drivers)

  My graphics were problems since I got my laptop and I didn't realize what a few months after when I did a check on why my graphics running on low FPS. I called customer service and they could not solved the problem, so I started to do the research and updating my drivers for each of them and switching them too. I have finally fixed them and instead to run Minecraft on 22 FPS, I was there at more than 60 FPS.

  Now, this graphics card is good and all, but there are not adapted to the new games (and I've had this laptop 1 year). What don't get me, is why HP installs some old graphics chips in a new laptop. in any case, I want to see what I can put in the new card. I really want to install and Nvidia 650 m, but I don't know because I don't have any information on my motherboard and it is manufactured by HP. Why I want to improve it is because that 1.) This chip sucks and can't play the games of 2005 and more than 2). He cannot run newer games like I'm a player PC of BF3. I get a strong brand of 28 FPS on BF3-ultimate low quality on this game, he reached sometimes 30 but not much. I want this thing to run as good as my game desktop computer that is custom built, so I really want to know what works with this laptop.

  Please help me to know what works so I'll be better satisfied with HP products.

  -Spencer

  Read this document. This has been implemented by one of the community experts (erico).

  The answer is usually going to be no upgrade that has been done on the graphics card as this is usually soldered to the motherboard and designed to work with specific chipsets. The fact that this example uses the switchable graphics actually still less likely. I'm sorry.

  PC hardware is changing at a rapid pace, so you get a day probably will be obsolete in a few months if not sooner. I personally ordered a laptop and there was already a new model of the series which has a better processor and graphics card to this topic. Alas, I was outside the return period and could not take advantage of the new model.

  This largely depends on the software used, but cell phones are not usually able to achieve the same performance as a desktop game PC. My laptop performs as well as my office during playback of half-life 2, but there is a big difference when I play Crysis. The experience will depend on how the program is written and how the game engine is optimized. It varies from game to game.

• HP pavilion Dv6 laptop: does not start in normal mode, safe mode

  Hi all

  I have HP Pavilion DV6 laptop with windows 7 Home premium 64-bit OS. It was working fine up until two or three days.

  After that some software upgrades, it has stopped booting.   When I tried to start it in safe mode, it stops at disk.sys.

  I don't have win 7 OS CD or recovery CD.  So I downloaded the trail version of windows 7 SP1, I want to install this, but he is suspended the windows logo.  I Googled it has bitten, I loaded a linux kernel and access the hard disk.  I backed up all the files required by using this boot of linux.

  I don't know what to do now?  What is the problem with my system. When I ran the drive diagnostic. It was a failure. That means that I can't use this HARD drive?

  Any help is greatly appreciated.

  Concerning

  Stéphane

  Hi stephane,

  Well the error code certainly would indicate that the player began to fail, but just in case, you might try to wipe the entire hard drive first and then reinstalling the operating system as described below.

  Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

  http://Software.LSoft.net/KillDiskSuiteFree-Setup.exe

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your Windows 7 installation disk will reformat the HARD drive.

  Insert this CD into your PC which is unable to load the operating system properly. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard drive, Select (80 h) and press f10 (you will also need to type a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

  When the process is complete, remove the CD of Killdisk and try to reinstall Windows 7.

  If it still does not work, I think your only option is to replace the HARD drive.

  Kind regards

  DP - K

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.

• When I try to use the parental controls, I tells me that this page could not load any ideas

  When I try to use the parental controls, I tells me that this page could not load any ideas

  Hello

  Since when are you facing this problem?

  If it worked before, then do a system restore to restore the computer to an earlier point in time before the problem started.

  See these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I do not have any manual or windows seven cd when I bought my hp pavilion dv6 laptop 6115 tx.

  I do not have any manual or windows seven cd when I bought my hp pavilion dv6 laptop 6115 tx. Am I supposed to do? I bought it in this store called "Staples."

  Hello

  There is no DVD or CD with operating system. You must create a set of recovery disks.

  Resources:

          Using HP Recovery Manager in Windows 7

  There is no paper manuals.

  Click the Windows Start button.

  Write in the search box " Documentation HP " and run it. You will find all the documents.

• I try to register with a mixer via a usb connection. I can tell I have the settings correct, selected in the hardware Audio section. It worked before, but it's not. Any ideas? It's driving me crazy!

  I try to register with a mixer via a usb connection. I can tell I have the settings correct, selected in the hardware Audio section. It worked before, but it's not. Any ideas? It's driving me crazy!

  That entry of casings do you use on the Yamaha and what you've plugged into them? With the whole level at about 01:00 controls, as Neil suggests, increase the Gain until the red LED on the channel starts flashing. And then put it down a bit so that it no longer lights except very occasionally. You should then see the green signal LED flashes but not the red. You should then have reasonable level in hearing.

• Pencil tool (N) close the trace does not work, any idea?

  Pencil tool (N) close the trace does not work, any idea?

  with the completion of a path with the pencil tool, I don't get the small circle at the cursor level to close the path.

  Zoom click on the pencil tool in the tools Panel and you will see.

• OJ6480 am not able to import photos from the memory card inserted in the printer to laptop?

  I can't import pictures from my memory inserted in my OJ6480 card.  I am connected with USB and nothing appears automatically after you insert card.  Also, I used the menu photo option and he doesn't want me to import.  Help, please!  Thank you.

  Hi cafahr,

  I understand you are trying to print photos from a memory card.

  I find the user manual for Officejet 6480 and found the following.

  After taking pictures with your digital camera, you can print them immediately or save them on your computer. To save the pictures on your computer, remove the memory card from your digital camera and insert it into the slot for card memory on the device.

  To save your photos

  NOTE: Use these instructions only when you use a network connection. If you are using a USB connection, then a dialog box appears automatically on the computer when you insert the memory card into the device.

  1. Insert a memory card into the suitable location on the device.
  2. press on the picture Menu.
  3. press the arrow keys and select Photo transfer and then press OK.
  4. press the arrow keys, and then select Yes.
  5. press the arrow keys and select transfer to computer, and then select the name
  of your computer.
  6 follow the prompts on the screen on your computer to save the photos to your
  computer.

  From what you described, the question is simple, the dialog box does not appear on the computer. What happens if you start it > computer or workstation? Do you see something here that looks like it could be the card into the printer?

  Try to leave the printer and unplug the power cable (with the inserted memory card), leave the printer unplugged for about a minute and then plug it back. I want to see if this will push the communication to the computer.

  Have you used this memory card in the printer before successfully? I ask because the problem may be the memory card or the memory card reader in the printer. Take a look at this link, memory card troubleshooting.

  I hope it's useful. If the problem persists, please return with answers to the questions I asked, I'll gladly do some additional research and return with possible solutions. Please also let me know if you use a Mac or a WIndows OS.

• I have a Pavilion dv6. The test of hard drive reads: SMART Long DST passed, short DST passed, and failed.

  I have a HP Pavilion DV6 and it will DISPLAY, allow me to connect, and then reading welcome with the busy symbol, then the screen goes black.  My pointer always recognizes the touchpad and moves accordingly.  I've performed memory tests and received the following errors

  Failure ID: PU56W2-5KL62G-XD0141-61F103

  Product ID: LK469UA #ABA

  Hard drive 1

  Test drive: FAILURE

  It comes after the memory test, said this lower slot 2 failed.  I don't know what happened, but I want to be sure, I replace the components just before that I'm going to spend a lot of $.  All the tips are greatly appreciated.

  The hard drive LK469UA ID is used in the HP PAVILION DV6-3236NR NB PC US

  Assuming this DV6 is an American product, it's DV6-3236NR specifications

  There's an alert about the products of hardware for the DV6-3236NR, for the SATA (Serial ATA) hard drive controller here.

  "... Serial - ATA (SATA) ports in chipsets can degrade over time, that may affect the performance or functionality of the SATA-related devices such as disks, hard and DVD players. »

  The problem with models sold by little close before March 2011, including "fourth to sixth digit of the serial number are digitally"107"or less" effects AND where ' is the name of the chipset in the Device Manager... ".  "Intel (R) 6 series/C200 Series Chipset Family.    There are other caveats.  Not all of these DV6 have been affected.  HP and can still have a replacement

  "If you have an HP computer with the affected chipset, HP recommends that you contact HP support for service solution-join and receive the update free of charge for you."

  See the link above for more details.  We will this rule first and then move on.

• 5 GHz 802.11 a/b/g/n card Bluetooth Combi for Pavilion dv6-3141ea

  My Pavilion dv6-3141ea has a Broadcom bgn/Bluetooth combo card 4313.  I would like to take advantage of the 5 GHz 802 technology. 11A for speed and stability.  Forums, I understand that the BIOS (in this case F29) rejects all new maps without approval of HP.  Is there a map that will meet my needs and is usable in this laptop?  Thanks for any help and advice.

  Pavilion dv6-3141ea notebook PC

  Windows 7 64 bit (fully updated)

  F29 BIOS

  Network PCI Express Half-mini Combo Broadcom 4313 bgn/Bluetooth card

  I know that you prefer, but HP does not have a 2 x 2 card which is also Bluetooth. The BT usb dongles bit work well enough (maybe better than internal cards) and are almost invisible, but you lose a single usb port.

• Download files and images to iCloud is frozen - Message Finder: "Download 533581 elements (118,11 GB of 711,95 GB)" but not moving not! Any ideas?

  Download files and images to iCloud is frozen - Message Finder: 'Download 533581 elements (118,11 GB of 711,95 GB)' but it does not move for days now! Any ideas?

  I suspect you might get better results if you uploaded your batch files.

• HP Pavilion dv6-2106ea: need a new card wifi for Hp pavilion dv6-2106ea

  Hi I want to replace my card mini wireless to my HP Pavilion dv6-2106ea. looking for a faster card mordern 2.4 ghz and 5 GHz at the same time supporting.

  (1) I am new to this so please tell me which cards I can use, they should be better than my current and must support 2.4 + 5 ghz

  (2) I looked into this a bit, pelase tell me if this card is compatible with best quality.

  https://www.Amazon.co.UK/Intel-WiFi-wireless-512AN_MMW-802-11A/DP/B00K83BAWQ/ref=sr_1_1?ie=UTF8 & qid =...

  (3) if there are compatible cards better out there please link them to me or give me the full name and where I can buy them.

  to save anyone some time here's manual

  http://h10032.www1.HP.com/CTG/manual/c01860375

  Thanks for the help

  It is also compatible...

• Mid 2011 iMac 27 pink vertical lines and does not start - any ideas?

  My iMac was working normally when he is suddenly flashed to a Uni blue screen. I rebooted and it came with the normal loading as burt screen with vertical lines of roses. He gets a third of the way through the sequence start then just goes to a gray screen and hangs. I tried Safe thing same boot. Apple Diagnostics ran short and long tests, and comes without any problem.

  Occasionalyl iMac starts and works for awhile then crashes on a gray screen is unresponsive.

  Any thoughts on what would be the problem?

  6 months out of the AppleCare too!

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

  Question (?) Mark, record of flashing or a gray screen at startup

  It's related, but not identical questions. Their causes are described in based on Intel Mac-Startup sequence and error codes, symbols. Solutions will be found in:

  A globe or a flashing question mark appears when you start your Mac

  Mac OS X - grey appears during startup

  In most cases problems can be caused by one or more of these:

  a. problem with the computer's PRAM - see reset the PRAM and NVRAM on your Mac.

  b. boot, directory of the drive has been corrupted - repair with disk utility.

  c. critical system files are corrupted or deleted - reinstall OS X.

  d. the hard drive is physically non-functional - replace the hard drive.

  Please note that the information I have provided is what Apple recommends, if other users will suggest different solutions found here, then be sure to what they recommend has no impact on your ability to get the Apple continuous service guarantee, if any.

  Please do not start remove disks or change cables unless you know what you're doing and have exhausted other alternatives non-invasive described here. If you perform all knit yourself which is not approved by Apple, then you will void any warranty you can have and lose any other Apple support.

  Fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  The main difference if you use Lion or Mountain Lion, you must first boot from the boot Recovery HD simply HD recovery to perform the foregoing.

  Reinstall Snow Leopard without erasing the drive

  1 fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  2 reinstall Snow Leopard

  If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  Relocation of Lion/Mountain Lion without erasing the drive

  HD recovery start: , restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select the Recovery HD and click on the arrow pointing down.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu.

  Reinstall/Mountain Lion Lion: Select reinstall/Mountain Lion Lion and click on the button continue.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

• Online games, when they pop up, they are so small, you can barely see them. I just downloaded Win 7. And I tried to adjust the themes Aero back to basics. But it does not work. any ideas?

  Yet once, when I go to online games and most of those who pop up a new window, the game is so small, that I can barely see it. How to fix this. Tried to compensate for the Aero themes, but it does not work. What I missed... Any ideas how to change these sizes?

  Hi MaureenAnn,

  Welcome to the Microsoft Answers Community Forum site!

  In order to resolve your issue, please provide additional information;

  1. What is the game you are trying to play?
  2. Faced with this problem while playing games?
  3. It works correctly when you play a game stored on a computer?
  4. Was there any recent changes/updates / drivers installed on your computer?

  If you are facing this problem, only with online games, suggest to enlarge the page by clicking on the icon zoom on the lower right of the browser.

  Allows you to change the screen resolution by clicking Customize desktop by right-clicking on the desktop.

  In addition, we suggest you to optimize internet Explorer and check if it solves your problem. To optimize internet Explorer, I suggest you visit the below mentioned link.

  http://support.Microsoft.com/kb/936213/

  I hope this helps solve your problem!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think