I have a Pavilion dv6. The test of hard drive reads: SMART Long DST passed, short DST passed, and failed.

Similar Questions

• HP Pavilion dv6-6c45se: migration from hard drive to ssd

  Dear Sir / Madam
  I'm about to migration from HDD to ssd on my laptop.
  Now the question is: is my motherboard support sata 3?
  My laptop computer product name: HP Pavilion dv6-6c45se Entertainment Notebook PC

  My product number phone: A7P17EA #ABV
  I'll be glad if you help me
  Thank you

  Probably not with a 2d gen i5 processor, but it does not matter. It will support an SSD SATA-III, even if the SSD transfer is limited to SATA-II. It will always be very, very fast and you will never see no practical difference. Download the SSD, you will not be sorry. Let us know if you need help most.

• HP PAVILION DV6 2141EE: SPECIFICATION OF HARD DRIVE INTERNAL

  WHAT IS THE SPECIFICATION OF PHYSICAL (SIZE) OF THE INTERNAL HARD DRIVE, I NEED TO BUY FOR MY LAPTOP HP PAVILION DV6 2141EE. I NEED TO REPALCE IT HELP ME PLEASE...

  The original specification is 500 GB SATA 7200 RPM hard drive. SATA is a compatible specification down, so you can use SATA600 or SATA300 hard disks.

  You can also use a 160 GB SSD at least in quality if you want to use the recovery media.

• Pavilion zv5000 - IDE adapter for HARD drive?

  I have a Pavilion zv5000 series portable whose hard drive died several years ago. My father sent him to a work friend, who understood that it was the HARD drive, and I guess that he threw the car with an adapter with it. I got an IDE drive, foolishly, assuming that the pins on the drive just fit into the connector on the laptop itself. After a lot of confusion as to why the player wouldn't be good, a research showed a card equipped with a regular at one end IDE connector and a connector similar to that on the laptop on the other. I ask if it is true that I need one, even if I do not otherwise so that it connects.

  Also, nines are isolated from the main pins on the drive. The old connector Molex had also four pins. These are the power pins, and the adapter address these too? It doesn't seem to be any other connector on the laptop. Once again, I want to just confirm this and no I have to not just buy the wrong thing for this laptop.

  Therefore the adapter that I'm looking for?

  Yes, I used to own a zv5000 and I can confirm there was a plastic connector black who went on the IDE brass pins on the hard drive to allow the connection to the motherboard.

  This is what you need:

  http://www.eBay.com/ITM/hard-drive-connector-for-HP-Pavilion-ZT3000-ZV5000-ZX5000-/200774656750?PT=US_Drive_Bay_Caddies&hash=item2ebf1a22ee

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• I have a Pavilion dv6 3123c Windows 7 64-bit recovery disc?

  I have a Pavilion dv6 3123c l 64-bit of Windows 7, which began to stop spontaneously. I took it and he was working on and it seemed to work a little better, but would still be closed when you try to view the video. I got a new laptop for Christmas, but I wanted to return it to the factory settings to see if that solve problems and still usable. Whenever I try to run the system recovery it stops in the middle of the procedure. I can't find online for this particular system recovery disks. There are all the other drives I could use or any other option for this return to the factory settings

  Try a HP partner. The price is expected to be on the same $30,00 USD + - $ 5. I tried the link that I provided to the partner of HP and he shows them as the set for $27.00.

  

  Best regards
  ERICO

• memory card reader, do not read any card I have a pavilion dv6 laptop 3236nr any ideas?

  memory card reader, do not read any card, I can read my cards if I put in an external adapter to a usb port

  I have a pavilion dv6 laptop 3236nr any ideas?

  I don't have no idea when it stopped working, it worked when I got this laptop, its mnts only about 6 old

  Install the drivers from the link below card reader. The drivers applies only to Windows 7

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-82667-1&cc=us&DLC=en&LC=en&OS=4063&product=5058756&sw_lang=

• Is it possible to change the 500 GB HARD drive with an SSD on my HP Pavilion MS228sc?

  I wonder if it is possible to change the 500 GB HARD drive with an SSD on my HP Pavilion MS228sc?

  If 'yes', I guess I have to go for a SATA SSD if there is. But I have to worry about other specs?

  If 'Yes'... what could be.

  I googled my question but no answers... so I ty Wizzards :-) Forum

  @Lord_Nikon

  In fact, this is not true. As long as he uses a large SSD enough it will be able to use the recovery media. I suggest using a SSD of 256 or 512 GB if budgeted for the upgrade...

  He doesn't have to make a Windows 7 installation USB drive and use the activation key license on the certificate of authenticity from the PC Windows to perform a cleanup to install.

  One of them should be on your PC. The Prodct key is what is needed for installation and activation online.

  

• I try to use the test creative cloud on a PC windows 8.1 software - I downloaded and removed Photoshop CC 2014 twice - whenever I open the file it says there is a problem and it stops and closes. I can open indesign and perhaps others ap

  I try to use the test creative cloud on a PC windows 8.1 software - I downloaded and removed Photoshop CC 2014 twice - whenever I open the file it says there is a problem and it stops and closes. I can open indesign and maybe other apps but photoshop doesn't. Any ideas?

  What is the detailed crash report saying (check the system event viewer)?

  And you have updated your website of the manufacturer of the GPU video card driver?

• I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  What do you mean, your message is not clear.

• Does anyone have a pinout for the UMI OR AKD Drive Cable?

  I make a motion controller with an NI 7350 card with evasion NI UMI-7774.  I connect to the UMI-7774 to a drive Kollmorgan AKD with UMI OR AKD drive cable.  This cable has a terminal of 20 pin block which I believe includes the home and limit switch signals, but I don't have a pinout of the UMI to AKD drive cable to verify this.  Anyone know where I can get this pinout?

  Thank you

  Chris

  Hi Chris,

  Can be found on page 8 of the manual of getting started with the NI 7340/7350 and AKD Servo Drives Motors controllers the pinout of the connector terminal screws 20 pins of the UMI to AKD drive cable. Please do not hesitate to let us know if you have any other questions or is not what you are looking for.

  Thank you

• all the pages that load do not match the screen have to scroll on the side to side to read

  all the pages that load do not match the screen have to scroll on the side to side to read

  all the pages that load do not match the screen have to scroll on the side to side to read

  =================================
  Try the following...

  View / Zoom... reduce the percentage

  The Zoom option can also be accessed from
  your at the bottom status bar.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

• New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  VAIO laptop

  New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  To restore the software preinstalled on the computer, or to install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

  Sony support:
  http://eSupport.Sony.com/

• How can I find my product key if my hard drive is empty, my product key is rubbed off and I don't have the owner of the instillation

  How can I find my product key if my hard drive is empty, my product key is rubbed off and I don't have the owner of the instillation

  Hello

  "my HDD is empty, my product key is rubbed off and I don't have the owner of the instillation.

  in this case we cannot help you find your product key

  If vista is preinstalled ask that the manufacturer of the computer is that they will sell you recovery disks and also ask them if a product key entry is required on your part when installing the same

  It is not normally; but ASK them

• Hi, I have a problem loading window it says invalid partion but starting in fast web hp I am use windows home premium 7 with ahp touch smart tm2, is the failure of hard drive

  invalid partion happens at startup if you press the f10 key with that he goes to the fast sequence of hp with at least you can acess the web and that's what I'm writing this with... myQuestion is the failure of hard drive?

  Perhaps, I backup and try a reinstall.

  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
  http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  For HP, press F11 directly after switching on the device

• Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Since I load Acrobat Reader DC, when I try to save the document, word to PDF, the pdf file pages are cut on the width. I use Microsoft Office Word 2007 and I have no problem with the previous version of Adobe Reader. Should what settings I adjust?

  Hi judithl34724699,

  If you want to convert Word files to PDF with the Adobe Reader application then it is possible with the service Pack of PDF. Try to use the service on the web: https://cloud.acrobat.com/convertpdf

  Also try to use a different file type.

  Thank you

  Abhishek