Memory expand satellite 2800 100

Similar Questions

• On the former extension of memory by Satellite 2800 200

  In the product form, I found that this model could have only the extension of memory of 128 MB. However in the user manual, they say that 256 MB expansion is also supported. Which one should I believe? And if the 256 MB is supported which is the appropriate memory model? Or is the limit really 128 MB and why? For some reason any HW?

  Where can I find information on what size hard drive are supported by this model?

  Hello

  my best friend also has a Satellite 2800 and updated his book up to 192 MB.

  I spoke with a Service partner and they told me that the following Rams will be fit.

  PA3003U - 1 M 03 32 MB
  PS3004U - 1 M 06 64 MB
  PS3005U - 1 M 12 128 MB

  With the part number (P) you can order to a partner or an authorized dealer.

  Goodbye Chris

• Upgrade memory for Satellite 2800 400

  I am trying to upgrade my ram to 128 on the laptop. After following the instructions for the instillation, that I turned the laptop on to find that it was slower than before and that the new ram had not registered as 128, and always thought it was 64 in someone can help me solve this ir is there anything I can do?

  Hi Ben

  Maybe you used the memory modules bad.
  As far as I know that you can upgrade memory for max 192 MB
  The 64 MB has been installed in an internal memory and cannot be deleted.

  I found these compatible modules:
  PA3003U - 1 M 03 32 MB
  PS3004U - 1 M 06 64 MB
  PS3005U - 1 M 12 128 MB

• Satellite 1800-100 Celeron 800 Mhz memory wich?

  As the subject says, I have a Toshiba Satellite 1800-100 laptop Celeron 800 Mhz with 128 MB of Ram and I need extra memory for it.
  I want 256 MB additional but which must be of type number in my laptop? Unfortunately, I couldn't find a good job site to find the answer by myself.

  Hello

  Check the following URL. I used ORCA RAM modules myself successfully.

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6988&ft=M&St=1

  HTH

• Satellite 1800-100 won't start with new memory

  My satellite s1800-100 won't start although my new memory (2nd) module is 128 MB PC100.

  I have Samsung samsung K4S281632C-TC1H module as PC100 (128 MB) memory on SLOT 1 by default.

  Although all of the features and form factors are clean, why not my Satellite S1800-100 starts? I checked the new (slot 2) memory works fine and tested OK.

  So, is there as a possibility to have a problem in the 2 Slot? Or is associated with failure of the BIOS? (there is no more recent BIOS, current is 2.20 for Satellite S1800-100).

  I am disappointed. I bought a new 128 MB PC100, to insert it in the slot 2, my Toshiba didn't boou up!.

  Important note: if I connect the new memory I bought yesterday, works very well in Slot 1.

  Please help and understanding.

  Kind regards...

  Hello

  Well, it very difficult to say why it won't start.
  I think that there are several possibilities:

  (1.) you used a bad module
  (2.) the second Bank of the Board of Directors has a malfunction
  (3.) the laptop does not support max 256 MB of RAM

  I think that point 1 and 3 is not relevant because you have tested the module and it worked on the first location. Additional the laptop should be able to handle 2 x 256 MB memory, so you should be able to use 2 x 128 MB

  I think that the second ram location may have a malfunction.
  Please check the second slot with a module of memory.

  The second possibility is to use exactly the module which is recommended by Toshiba.
  As I remember it s PC100 128 MB (PA3005U) SDRAM

• What memory can I use for Satellite L20-100?

  Dear Sirs,
  Please, help me to understand what type of bars of memory is compatible with satellite L20-100?

  on your site I found the description only for L20 - 101 -.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=EU&PRODUCT_ID=107212
  -
  and it is this:

  Standard system memory: 512 MB
  maximum scalability: 2 048 MB
  technology: DDR2 RAM
  expansion module sizes: 128, 256, 512, 1 024 MB

  but on different sites, I found this module maximum expansion size = 512 MB

  and in the instruction manual (pdf-Russian) they say that the module is DDR instead of DDR2!

  which one should I buy?

  This is a appropriate:
  Kingston DDR2 512 MB PC-4200 (533 MHz) SO-DIMM KVR533D2S4/512
  200 pine?

  I can even use but 1024 MB?

  Hello

  Well, I think that it should be possible to upgrade the memory to 2 GB (2x1024Mo)
  I also found a site of memory module very useful:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20683&ft=m&St=3

  and according to this site, it should be able to use the 200-pin-DDR2-533 modules SODIMM

• Satellite 2800-200 - what external enclosure that I can use for HARD drive

  My daughter has a laptop of Toshiba S2800-200 eldely.
  It is broken where the mains cable between the machine and she has been quoted £100 for repair!
  She has already bought a new computer repair is not an option.

  Toshiba, however, contains some files (photos, music etc, mainly) that she would like to keep, but get the files of the computer laptop and on its new machine is a problem.

  My thought is to buy a cheap USB basket somewhere like eBay, remove the hard drive and use the caddy to download photos. etc on his new computer via the USB port.

  To buy the correct caddy I need to know the full spec (diameter, capacity, etc.) of the Toshiba hard drive and I don't have a clue!

  Can someone here point me to the spec of the drive on a Toshiba S2800-200 please?

  I guess the Satellite 2800 series is supported by the IDE HDD controller and HARD drive would be also a 2.5 IDE HDD.
  That's why you should look for a USB IDE HDD box

• RAM and the satellite L20-100 HARD drive

  Hello!

  I have an old Satellite L20-100 and it has a few problems with the HARD disk. I want to buy a replacement (new HARD drive) so I need to know what are the types of FDI in L20 - 100 discs...

  In addition, what type of DDR2 RAM I should buy to install in this laptop?

  Don't want to buy a fake, because if I do, it would be very difficult to sell...

  Please, help :)
  Thank you.

  Post edited by: in_silent

  Hello

  I agree with Akuma L20 supports a SATA controller and you need and 2.5 SATA HDD.
  Usually it s no matter which manufacturer is all 2.5 SATA hard drives must be compatible

  With regard to the 48-bit LBA:
  As far as I know that this could be just a problem with HDD IDE (P - ATA). SATA HDD should not be affected. So, theoretically, you could upgrade the HARD disk using larger than 128 GB.

  Regarding the upgrade of memory:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20683&ft=m&St=3

  You need DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM and you can use 2 x 1 GB RAM

• Satellite 1800-100: message - Bios block3 damaged

  When my Toshiba Satellite 1800-100 startup appears «block3 damaged, please call military...» ». The CPU, memory, RTC battery, main battery, hard disk, power, work correctly.

  I tried to update the bios of dk using the F12 key without errors, but the message is the same at the start.
  Please, help me.

  Hello

  There is nothing wrong with the hardware of the laptop but only with the BIOS!
  I read a few threads on a similar BIOS problem and it seems the BIOS has to be flashed again on the special way!

  It should be a message sayingPlace a maintenance disk in the drive and press on enter.
  Am I wrong?
  Well, this disc of maintenance is needed to repair the BIOS and only the authorized service provider could do that!

  In my opinion, you should contact the ASP in your country for assistance!

  PS; I found this very interesting forum thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19801&MessageID=72596

  It is perhaps useful to s

• What is an update of RAM max for Satellite 2800-400?

  64 MB, is built in (?). I found in the specifications max 192 MB, but I think that it s not up to date. Can I use RAM of 256 MB or 512 MB module?

  Please see this page:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=7170&ft=m&St=3

  Satellite 2800-400 comes with 64 MB or 128 MB internal memory.
  If you have a laptop with 64 MB, you can improve the memory only to a maximum of 192 MB.
  The Sat 2800-400 with 128 MB internal memory can be improved up to max 256 MB!

  In both cases the 144-Pin PC100 SODIMM 128 MB module is greater, which could be inserted!

• Satellite 1800-100 microprocessor upgrade

  Hi!, thanks for this forum.

  Okay, I bougth a satellite 1800-100 four years ago in a shop, here in Spain. I improve my memory with a module of kingston pc100 144 pin with 256 MB. I mounted this module because this motherboard FSB is 100 Mhz.
  Now, my laptop has 384 MB of RAM.

  But, I would like to increase the speed of my 1800-100

  I opened the laptop to investigate the resources inside. I mounted and dismounted several times, CPU Intel celeron 800 Mhz processor. But I Don t know if it is possible to have more information on the characteristics of motherboard'internals. I would like to know which is the microphone the quicker one can get in my book. ¿Celeron 900, 1000, 1100 or more? Where can I get a pentium III 800, 900, 1000, 1100 or more? I didn t see indications or jumpers in the motherboard on the tensions, or speeds and I Don t now if this motherboard determines automatically the voltage and speed when the microphone is mounted. I have 1 or 2 microphones of fastest in the House, and I want to ride in my laptop
  without the risk of burning the microphones or the motherboard. Is posible to find information on our satellite motherboard. I Don t know who is the superior of technology of microphones that are supported in my 100-1800.
  It is the only way to increase the speed, because the chipset is not really good, and cheap nor quick. I think that when someone buys a computer, desktop computer or a laptop, it can receive all the documentation about the inner workings of a computer, so isn´t?

  I m sorry for my questions severals, but I m very intetesred with this problem...

  Thank you all...

  Hi, Rob

  Information about the technical details on his books will be no manufacturer of space available.

  A laptop is high designed compact Machine, which is not
  be for the upgrade of this element by anyone.

  OK, hard drive and memory are no problem as long as you can catch this part by opening a ceiling with screws.

  So finally, you won't find the technical details of the motherboard is this Forum here, the only chance I have is to talk directly to a technician of Toshiba.

  Maybe he'll tell you a bit about you looking for ;)

  Good bye

• Satellite L20-100 - what modules of RAM can I use for the upgrade?

  Hi all

  I have TOSHIBA Satellite L20-100 and I need to upgrade the ram memory up to 2 GB.
  I found these models on the internet but I don't know that it is compatible with my computer laptop or not.

  the following module on the eBay store:

  * 1 GB Kingston DDR2 667 Mhz 1 GB DDR laptop 2 NB RAM *.
  * Hynix 1 GB RAM DDR2 5300 s - computer notebook memory 667 MHz *.
  * ASint 1 GB DDR2-667 PC2-5300 PORTABLE 200 pin MEMORY *.

  Already now I have 512 DDR2 667 Mhz

  Or any knows from where can I update the correct RAM?

  Hello

  Theoretically, you can use all modules store because all the modules to meet specifications, DDR2-RAM, 1 GB, etc. for example.

  In your case, I'd take the Kingston RAM. I've never heard ASint RAM, but I have good experiences with RAM Kingston. I always use Kingston RAM to upgrade my notebooks and never had any problems.

  Last but not least, you can also buy RAM of an authorized service provider.

  Good bye

• Where can I get cd of restoration for Toshiba Satellite 2800-s202

  Hello I have a * toshiba satellite 2800-s202 *, very old computer. I had the laptop there so long that the I don't know yet if there is a restore cd that came with it. Well, I need to reformat/recover my laptop. Is someone can you please tell me where I am able to get a specific for my laptop recovery CD?

  Links to where I can download & burn it to a cd,
  or links to the Web site that I can buy a cd or anything else?

  It would help me a lot, thank you

  Marina is right. All parts and also the recovery CD can be ordered from the ASP in your country!
  Contact a guys order the compatible CD

• error 0 x 00000024 on Satellite Pro 100

  Hello

  I have an old Satellite Pro 100, handed one to nine.
  I was loading a .iso file when my laptop crashed.
  I restarted to get to a blue screen with the error message 0 x 00000024, followed (0x001902FE, 0xFX7AAF380, 0xF7AAF07C, 0x86E74805).

  He told me to restart the laptop and run chkdsk /f in command.
  I started in safe mode with cmd, cancelled stpd.sys, which caused my laptop down and ran chkdsk/c (check) before I ran chkdsk /f (fix). It worked very well.
  I then input the command chkdsk /f and cmd said that he could not access and lock on the drive. He asked if I wanted to run chkdsk /f on the next startup. I said yes and then restarted.
  It came with the blue screen again, so I held the switch to turn it off, and then turned back on.
  I loaded in safe mode with cmd and cancelled loading stpd.sys.
  This time, there was a longer break, and I assumed that the laptop was running the command chkdsk/f function.
  The laptop has rebooted spontaneously after that she 'finished', as far as I could tell, but once again to the front blue screen.
  I also tried to use the command chkdsk /r (resolve), but that froze just of the laptop.
  When I restarted the laptop, he returned to the blue screen.

  Can someone tell me how to solve this problem, preferably without wiping my HARD drive, I read on websites who told me to use the chkdsk/f above method proposed my blue screen?

  Thanx

  Hi mate,

  First of all, it would be interesting to know what model Satellite Pro 100, you exactly. Satellite Pro A100, Satellite Pro L100 or something else?

  It's not easy to tell why you get thses blue screens, but have you tried a system restore to an earlier point? You can do this in the advanced boot menu (F8) where you can also choose Safe mode, etc.
  Check this box!

  If this doesn t work I think you need to reinstall Windows. If there is a recovery disc supplied with your laptop you can use. This disk can restore factory in a few minutes and your laptop should work properly again. :)

• A few problems with the Satellite U920T-100

  Hi guys,.

  my girlfriend ordered a Toshiba Satellite U920T-100 about three months ago and she had problems with it since. We're not quite sure what causes because they seem to happen randomly.

  The questions are:
  -It starts, but it freezes at the Win8 connection with a blue screen (a rather hot blue, no blue screen of death)
  -It starts not at all, only after a few attempts
  -It will not stop
  -It freezes all by organizing files (for example copy of files from A to B, but not yet large amounts of files)

  New: these questions seem to be completely appearing randomly, I wasn't able to reproduce them in any way.

  Also: WLAN connectivity is really bad.
  The laptop is not able to find networks, while my laptop has no problem with it.
  And when he finds them and connect, the connection be lost - once again: no idea why.

  That surprises me the most, because in tests and comments that I've read that connectivity has been praised everywhere.

  I have reset factory?
  Run through some specific tests?
  Or is is hopeless, because there are so many problems with it?

  I'd appreciate your help!

  Hello

  > I should factory reset it?

  I think you should do that because the issue described can be related to system problems, but also hardware problem (HARD drive for example). The resumption of the factory allows you to check if its software or hardware related problem.

  Usually, all the problems of software (System) could be solved by the recovery process. Hardware problems would continue.

  From my point of view, the recovery of the system is the first step, you should try to solve the problem.
  In case this is not enough, a hardware problem (RAM or HARD disk) is possible, and given that the laptop is still under warranty, I recommend you contact the service to check the unit.

  Hope my advice might help you a bit