memory for aspire 7741z-4433

Similar Questions

• Help to choose the upgrade memory for Aspire D270-1401

  I had difficulty pinning down the specification of an upgrade memory to 2 GB for my Aspire One D270-1401.  Can someone help me decide between PC3-12800 and PC3-8500.  It doesn't seem to be any help available for this model on the Acer site.

  The model has locations of memory that one alone and it supports DDR3 PC3-12800 unbuffered NON - ECC 1.35v.

  Click on the Kudos to say 'Thank you' to help!

• RAM upgrade Aspire 7741Z-4433

  I bought & installed 2ea DDR3 1066 SODIMM 4 GB & the machine will start 1 time then stop & unbootable. I put a 4 GB stick in 1 location 2 GB in the other without any problems. Have you tried all possible combinations, but this machine will not have 8 GB. Acer said it will. I went to the last BIOS 1.26 with no luck.

  What I am doing wrong?

  Is broke & assorted bought 2 more sticks of "Crucial" memory in a computer store & the problem is solved! The RAM I bought online will come back.

  Thank you very much for the help.

• Upgrade memory for Aspire 7720z - I need help for my Kingston memory. Help!

  I try to install both Crusial and Kingston memory, but two of them do not work, I have a blue screen. Specifications memory Kingston shows PC2-6400 CL6 200 - pin SODIMM. What memory I have to buy.

  You visit the Crucial site and follow the configerator to find memory guaranteed to work with your particular laptop model

• What is the model of memory in Aspire V 15 V3-575-7008? I would buy one just like it.

  What is the model of memory in Aspire V 15 V3-575-7008? I would buy a 8 GB memory similar to expand to 16 GB. Thanks for help.

  Hello

  You can find the brand and part number of the original memory with HWINFO portable version (without installation).

  Here are the bars of origin:

• Need help with an Acer Aspire 7741z-4643

  Hello

  I have a laptop of Acer Aspire 7741Z-4643. I got it for (I think) 4 years. I don't remember when I bought it.

  One day, when I used it just went completely black screen. So I turned it off and then back on and the screen was still black. Every time I turn it on the screen was black. It should start as usual and when she would get to the point where you connect to the computer it would go black. So I took it to my friend who works on computers and he said that my hard drive was dead. I replaced the hard drive with a hard disk of 500 GB of the playstation 4 that I wiped with dban.

  I can't use the computer because windows is stored on the old HDD that is dead and the new hard drive never had windows on it. I tried to turn on the computer and it says that no opperating system was found.

  I intend to make a windows 7 install usb using windows 7 usb dvd download tool from microsoft.

  But my problem is, I don't have my windows 7 product key, the sticker on the back of the laptop is faded and dissipated.

  My question is, is it possible that I can find my windows product key 7 directly from acer, using the serial number of my cell phone or my laptop snid?

  Thank you.

  -Josh

  Hello...

• Lost 10 keys on Acer Aspire 7741Z-4633

  On my Acer Aspire 7741Z-4633 17 "with the full keyboard and includes the 10 keyboard keys on the right side.
  Recently, I replaced the hard drive and install a fresh copy of Windows Pro 8.1.  Everything is loaded and it works fine, with the exception of 10 keys.
  My system came pre-installed with Windows 7 Home Premium.

  What steps should I take without having to install back via the recovery (notice: an unreasonable expectation of Acer $39), to restore the keyboard 10 right?
  What file of installable driver for 64-bit Windows 7 will take over this function on my computer?

  Thank you
  apexadam

  I thought about it.  #stupid
  Solution: Press NumLock to activate the scale of 10 keys between arrows or numbers.

  Laughing out loud.  Everything else was assumed initially.

  I win.
  -apexadam

• Touchscreen, Windows 7, Acer Aspire 7741z-5731

  Hello

  My Acer said it has a capacity of "multi-geste", but is unable to implement this function.  Went into the control panel and else where directed by Windows to put in place and have not yet found a solution.

  Anyone know what I need to do to enable the multi gesture with Windows 7 on my Aspire 7741z-5731 feature?  driving me crazy.

  THS.

  Hello

  To learn more about the multi gesture ability in you Acer click the link below,
  http://us.Acer.com/showrooms/touch/touchpad.html

  For further assistance, I suggest you to contact Acer support.
  http://support.Acer.com/us/en/default.aspx

• What is reasonable memory for Firefox use?

  Title says it all-

  What is reasonable memory for Firefox use?

  The normal use, I am an average of 1.2 G or about memory (of 16 G total); is this normal? Don't not maxing out at all but I was wondering.

  How to define and measure the use of memory for Firefox? Activity monitor? I use Firefox to write this. In the activity monitor, I see Firefox to 347 MB and Firefox Web Content to 259 MB.

• Adjustable memory for NB550D resources

  So after upgrading the memory in my NB550D to a module of 4 GB (3 GB usable) steals the netbook, but I noticed the HD 6250 graphics uses 1 GB of memory for himself, obviously such a graphic of a budget entry has not even need half of this sum, especially that the screen is only 1024 x 600 , so if an admin is to check this, I wondered if in a future BIOS, an option could be added to adjust the amount of GPU memory?

  I'd rather have the GPU using approximately 256MB and rest in the direction of memory system, it does not require as much memory.

  Hey,.

  Who knows if Toshiba released a BIOS where you can adjust the graphics memory but such a function isn't known to me and I doubt it will happen.
  The memory of the graphics card will always be controlled automatically and there is no value that you can change.

  I mean that even 3 GB of RAM is really enough for performance netbook and I doubt you need more RAM and even some programs need more RAM you can use the virtual memory on the HARD drive.

• Question about the upgrade memory for my Satellite M40-307

  Sorry for the newbie question. But if I have 512 MB of memory for the time being, what are my upgrade options?

  Do I have to buy pairs of memory? So I can or buy 2 x 1 GB = 2 GB, or 2 x 512 MB = 1 GB + 512 existing. Or can I say just buy a single 512 MB or 1 GB chip?

  Since no one wants to answer:
  1. check if your laptop supports Dual Channel Ram (it should be, but just see the manual to be sure)
  2. knowledge of what type of RAM you have. This will add or remove a possibility of upgrade

  The thing with Dual Channel is, that you have the best performance if you use 2 RAM of the same type (really of the same type: company, size...)
  you could:
  3. Add a 512 MB of RAM of the same type you have
  3 b. buy 2 pieces of new RAM of the same type (1 GB + 1 GB, or 2 + 2 GB) and do not forget that your laptop supports this quantity (once again: manual to check)

  You will also find in the manual, if your computer supports DDR or same DDR2 RAM (faster)

  If you have lost your manual, you can download it here on the toshiba Web page

  I hope I could help a little.

• Upgrade memory for Satellite 2800 400

  I am trying to upgrade my ram to 128 on the laptop. After following the instructions for the instillation, that I turned the laptop on to find that it was slower than before and that the new ram had not registered as 128, and always thought it was 64 in someone can help me solve this ir is there anything I can do?

  Hi Ben

  Maybe you used the memory modules bad.
  As far as I know that you can upgrade memory for max 192 MB
  The 64 MB has been installed in an internal memory and cannot be deleted.

  I found these compatible modules:
  PA3003U - 1 M 03 32 MB
  PS3004U - 1 M 06 64 MB
  PS3005U - 1 M 12 128 MB

• Pavilion p6608f: upgrade memory for p6608f

  Hello, my Pavilion p6608f came with 4 GB of RAM. I want to upgrade. By HP features, the motherboard is a MSI ms-7613 and it should support up to 16 GB of RAM (4 x 4 GB DIMMS). I bought 4 DIMM which seem to fit specifications, but the computer wouldn't POST after installation. I tried reseating the DIMMs, but no luck. My hypothesis is that the memory is not compatible.  I'm unable to find good information on the compatible memory for this computer on the site of Kingston, MSI site, or the site of HP. (Any ideas on one) why the memory I bought is not compatible and b) how to find compatible memory?

  Thank you.

  Saw that Crucial guarantees their recommendations, I'd go with it.  You may contact their Customer Service to see what they have to say if you are still skeptical.  I have recommended Crucial memory for years without reports of incorrect memory being received.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Source for 2 GB memory for NB100-12 has

  Can someone tell me where I can get the upgrade of memory for my NB100-12 2GM has? How much does it cost? To install it, I have to remove renovate 1 GM and replace it with the new memory or what is the procedure?

  First, a question - you run the pre-installed Windows XP version? If so, I'm not sure that it will support 2 GB of RAM - no one knows with certainty? + Official + the NB100 only supports the 1 GB, so I would check before you spend the money...

  Assuming your OS + fact + allow 2GB, I suggest that you try Crucial - good memory, quality service and a fair price. If you go to the following link, you can enter the details of your netbook, and it will provide a link to the correct memory:

  [Crucial memory | http://www.crucial.com/uk/netbook/index.aspx]

  Looks like it's about £20 now - prices have risen lately :( You could get a memory that of + a bit cheaper, but then you'd have the hassle of work exactly what to get.

  In terms of editing, you need to remove the cover on the bottom of the NB100 (it is set by a single screw). Remove the existing RAM and mount the new stick. Replace the cover and restart - job done :)

• Extension memory for 1620cds

  Hello, I want to install an additional memory for my 1620 satellite CD. Anyone know what model of memory I can install?
  Thanks and sorry, but my English is not very goog. I am Spanish.

  Hello

  I discovered that these RAM modules are compatible with your device:
  128 MB - PA3005U
  64 MB - PA3004U
  128 MB - PA3005U
  32 MB - PA3003U

  Good bye