MENU BAR IS ALL BLACK AND CAN NOT READ THE OPTIONS?

Similar Questions

• I have a computer running VISTA. The CD-ROM/DVD-rom does not work and can not read the CD of the program that I placed in it.

  It won't read a DVD.  It will not read ANY CD or DVD.  I tried 12 different CD/DVD.  This isn't an upgrade to Vista; the computer came "made for Vista" with Vista installed on it.  I had added Nero.  I removed Nero.  I did all the updates. I have not released the driver and reinstalled.  He claims to have the latest driver software, but it won't work.  The computer can see the CD/DVD, but he calls it a 'CDROM '.  It is not the case.  It is a DVD/Cd-RW with Labelflash.

  I did everything suggested that past discussions.  I ran FIXIT program that claims that the drive works properly.  It is not the case.

  I tried to get various programs to recognize.  They cannot see the installed media.

  I uninstalled iTunes.

  Please do not give me the answer of cut-and - paste stock; It does not work.

  Please tell me what to do to make Vista see the media inserted in the CD/DVD-RW drive.

  Thank you.

  Hello

  Well, if you have tried all the usual bugs try this:

  Make a Restore Point:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ------------------------------------------------

  Then go to right click on UNINSTALL - - CD/DVD - Device Manager CHECK THE DRIVERS to REMOVE and
  continue.

  Reset.

  Occasionally, install an upgrade or a re - install will fix the problem and of course the drive or other hardware issues
  could be at stake.

  =====================================

  Here's the answer, just in case there is something you don't have, and I start up and down.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable
  or slight corrosion on the contacts (usually for a laptop) and other issues.
  

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===========================================

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I have a new mac air and can not get the bookmark to be deleted in Safari.

  I have a new mac air and can not get the bookmark to be deleted in Safari.  It has default Favorites - I don't want to see them--when I right click and select Remove - I get this error message.

  You are using Safari with bookmarks, history, and imported passwords of Firefox. To change your Favorites, you must first keep or delete data from Firefox.

  When I click on "do not keep" nothing happens.

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Preferences/com.apple.Safari.plist

  A right click or Ctrl-click on the line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Quit the application runs. Move selected item to the office, leaving the window open. Restart the application and test. If there is no change, leave again and place the item you back where he was, crushing the that may have been created in its place. If not, remove the item you moved. If possible, restore from a backup prior to the problem.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  Apple ID cannot be merged. We'll see if we can get to the bottom of your connection error...

  Tell us step by step, in detail what your actions.

  Tell us a story

  -with a beginning, middle and end. We need to figure out what you know and that you have lived.

  If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?

  Quoted by of Apple  'how to write a good question.

  To help other members in answering your question, give as much detail as possible.

  • Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
  • Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
  • Describe the problem and include all the Details on what seems to make it.
  • The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.

  For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

  "Keep it short and Simple"-take your time... but be thorough - CCC

• DeskJet F4580: new router cannot get connection and can not find the whole upward on macbook

  I had to get a new router as I have had problems with my fixed internet internet problems but now my printer does not work unless I connect with the usb cable, I have tried everything including the abolition of the printer, which now, I deleted the setting up of information out of my macbook and can not install the printer please help it worked very well with my other router...

  Hey @gingerjean1,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you have replaced your router and are having trouble with your Deskjet F4580 of connection to the network. I can help you with that.

  As you use Macintosh 10.7 I recommend the use of a Windows PC to install the printer on and then to add to your wireless network. If this isn't a practical option there are a number of things we could try.

  Apple Software Update

  1. Click on your Apple icon and go to software updates.
  2. Install the available updates.
  3. Apple's HP printer driversdownload.

  If during the installation there is no wireless options then:

  1. Go to your Apple system and print and Scan preferences icon.
  2. Double-click your printer icon on the left side of this screen.
  3. In the pop-up window, click on settings, utility, and then click Open Printer Utility.
  4. In this new window, you must have a wireless tab along the top, that you can click.
  5. On the left side, we are looking for a wireless configuration wizard.
  6. Run the Wireless Setup Wizard to add the printer to your wireless network.
  7. Once the printer is connected, disconnect the USB cable to the back of the printer.
  8. Return to the Apple, system, print, and Scan preferences.
  9. Click on the button "+" at the bottom left.
  10. In this window, select your printer.
  11. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  12. Click on Add.
  13. Try to print.

  Ad-Hoc

  If the method above does not allow you to connect the printer wireless, then it can work.

  1. Perform a factory reset the printer. I will include guidance on how to do so shortly in a private message.
  2. Turn on the printer.
  3. Press the button on the front of the printer wireless.
  4. Wait for about a minute.
  5. On your Mac or another wireless device, you should see a network with a name similar to "HP Deskjet F4500 XX Print" listed. To connect to this network.
  6. Press and hold the scan button (the icon of the printer under the red x on the printer) for 10 seconds. When you release the printer should print a test wireless report.
  7. On the device you connected to the printer, open a web browser and type the IP address in the bar of address exactly as shown on the test report.
  8. You should have a network tab along the top of this window.
  9. On the left side, we are looking for a wireless configuration wizard.
  10. When you run that must connect the printer to your wireless network.
  11. Once the printer is connected, disconnect the USB cable to the back of the printer.
  12. If you have connected your Mac to the printer above and then reconnect the printer to your wireless network now.
  13. Return to the Apple, system, print, and Scan preferences.
  14. Click on the button "+" at the bottom left.
  15. In this window, select your printer.
  16. If there is a line indicating the use that says Airprint click to select your printer in the list instead.
  17. Click on Add.
  18. Try to print.

  If it allows you to connect your printer to your wireless network and then do other forum users know clicking on accept as Solution below my post. Even if you have any other questions please let me know.

  I hope this helps and I hope you have a nice day!

• I use the older style firefox and can not get the password manager to remember one of my passwords, how can I do this

  I use the old style Firefox browser and can not get the password manager to remember a password of my main site. How can I do this?

  Thanks for the advice, I went to another program... Last time... and saved my passwords with it. I find it easy to use and non-intrusive, and it has several features that are very convenient for me.

• Example: Pavilion 550qe: have just got a QED Pavilion and can not find the place where the monitor.

  Have just got a 550qe of Pavilion and can not find the place where the monitor.   The image on the book they sent shows the exact card, I need but can't find anywhere on the back of the PC.    There are a few plates little who have the drivers there, but do not want to start removing the panels unless this is where some of the connections are hidden.

  Hello

  Can't find the official specs of HP. But since the following specifications

  |-Intel-Core-i7-|-Windows-10-|-Silver.product.100241370.html http://www.Costco.com/HP-Pavilion-550qe-desktop-

  There

  Ports:

  • 2 x USB 3.0
  • 2 x USB 2.0
  • 1 x HDMI
  • 1 x VGA
  • 1 x jack Headphone-out/microphone-in the drop-down list
  • Multi format card reader

  Depending on your monitor, you can use HDMI or VGA to connect. What is your monitor (make and model)?

  Kind regards.

• Manually reinstall Windows XP and can not find the product key.

  Manually reinstall Windows XP

  Manually reinstall Windows XP and can not find the product key.
  What to do to replace the product key.

  Where to find your product key
  You can find your Windows product key on the label supplied with the package provided with your copy of Windows. The label can also be on your computer case. Activation of the pairs with your computer, your product key.
  Lost or misplaced product key (certificate of authenticity)

  http://support.Microsoft.com/kb/824433

  How to get a replacement product key?

  To replace a Microsoft product key, you must contact Customer Support and Microsoft. To locate the phone number, visit the following Microsoft Web site:

  http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS

   

  For more information on this topic, visit http://support.microsoft.com/kb/811224

• Device, I have an archos 605 WiFi and can not get the Conect to my pc that like Windows 7

  I have an archos 605 WiFi and can not get the Conect to my pc that like Windows 7

  http://www.ARCHOS.com/support/support_tech/index.html?country=us&lang=en

• scratch the numbers on the card and can not read what do I do?

  I've wiped off the map of the SPINDLE too hard and can't read the last few numbers do - what I do?

  I guess that's the PIN to upgrade at any time?

  My PIN code does not work, what should I do?

  If your PIN does not work, try the following:

  1. check that the PIN has been entered correctly. PIN code is not case sensitive and is alpha-numeric.

  2. make sure that the PIN has not already been used to obtain a product key. A PIN can be used only once to get a product key. If the PIN has been used, you can connect to your account with your Windows Live ID (if you have it when the PIN has been entered) to access your product key or you can check your email for the confirmation e-mail, that you have received when the PIN has been consumed to access your product key.

  https://Windows.getmicrosoftkey.com/support-home.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact customer service at the:

  https://Windows.getmicrosoftkey.com/support-home.aspx

• InDesign CS5 and can not find the download of this version

  I need to re - install indesign CS5 and can not find the download of this version - I can find CS5.5 and my serial number is not valid for this version

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How to anchor on other sensitive design objects?  (I once saw a video of adobe and can not find the link now)

  How to anchor on other sensitive design objects?  (I once saw a video of adobe and can not find the link now)

  Check the 'Smart Position' option in the advanced part of the Position properties. Drag the "anchors" that are normally found at the top and left side of the blade up to what they encounter the side of the object you want to anchor to (a blue line appears, you can release the mouse then):

  

• I just bought Adobe Elements14 photoshop & Adobe premiere Elements14 I have an iMac and can not find the download for my platform.  There only Windows.  What should I do to get a Mac download?

  I just bought Adobe Elements14 photoshop & Adobe first Elements14 I have an iMac and can not find the download for my platform.  There only Windows.  What should I do to get a Mac download?

  Mariene salvation,

  Please find the links below to download:

  Photoshop:Download Photoshop Elements free trial | Adobe Photoshop Elements

  Creation:download first Elements | 14, 13, 12, 11, 10

  Hope this helps!

• I have adobe reader xi and can not find the "create button" in order to combine several files into a single pdf

  I have adobe reader xi and can not find the "create button" in order to combine several files into a single pdf

  Hello

  Reader is software to view PDF' only.

  You must either a pack PDF to perform the function of thin or Acrobat.

  Reader is not the software to perform editing functions.

  Concerning

  Sukrit diallo

• I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  Hi tonyf,.

  Greetings!

  Each device is compatible with a minimum version of camera raw.

  Here is the complete list: https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  Please check if you have this version of the camera installed which include your raw files.

  It would also be that your photoshop will not have to install this version of camera raw as its very old.

  In this case, you can convert your raw files to DNG and can use it.

  To convert the files to DNG, you must download and install the DNG Converter.

  Here is the link:

  Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows

  MAC: http://www.adobe.com/support/downloads/product.jsp?platform=Macintosh&product=106

  Concerning

  Jitendra