Menu Navigate > go to definition

Similar Questions

• Applications do not appear in the Menu navigate the workspace

  Hi experts,

  I applied planning patch 16580429 (The value of Patch version 11.1.2.2.304 update (PSU)) and run the redeployment manual because we use on Websphere, but now when I access the workspace do not appear my applications in the Menu navigate.

  Anyone know a workaround?

  Thank you

  Hi guys,.

  I had to solve this problem. This problem happened only WebSphere environment. I just filled out the path of the cookie for each JVM Hyperion on Websphere integrated solutions Console. Thus, planning applications begin to appear in the Menu navigate workspace.

  Thanks for any help.

• CS4 spry menu bar css rule definitions

  Need help, can't see the tree because of the forest.
  Is there a list out there everywhere where will tell us exactly what each css effects definition rule that happens for spry menu bars?
  Thank you
  Marshal

  "MSudrala" wrote in message news:[email protected]...
  > Help, can not see the tree because of the forest.
  > Is there a list out there everywhere where will tell us exactly what each css effects definition rule that happens for spry menu bars?
  > Thank you,
  > Marshal

  Marshal.

  Try here:

  http://labs.Adobe.com/technologies/Spry/articles/menu_bar/index.html

  --
  Ken Ford
  Adobe Community Expert - Dreamweaver/ColdFusion
  Adobe Certified Expert - Dreamweaver CS3
  Adobe Certified Expert - ColdFusion 8
  Fordwebs, LLC
  http://www.fordwebs.com
  http://www.cfnoob.com

• Could not find the calculation Manager option in the menu

  Hi all
  
  I have configured the calculation Manager in my machine [version: 11.1.2].] I can't find the calculation Manager option in the menu [Navigate-> administer-> calculation Manager].
  Calculation Manager is running. Kindly guide me to overcome.
  
  Thanks and greetings
  Alizée

  If calc manager has been installed after the configuration of the web, re-run the web comfiguration step. You may also cycle in the service of SST on the Foundation subsequently.

  Kind regards

  John A Booth

• The Spry menu bar navigation

  I am using the Spry menu bar and have several menu on my home page items that have incorporated under them. For example, I have an element of menu 'navigate' on the home page, and the slot 'Browse' 'saw inventory"and"wish list ". I want users to be able to access the sub through the menu item "Browse" items but does not allow users to open "Browse."

  I would like suggestions.

  Thank you

  Iain

  Just put a # where otherwise the URL would go as a

  Browse
  

  GRAMPS

• Background color on the menu bar

  I am inserting a spry menu bar in the top of my page. It is one level, there is no submenus. In order to insert it into the container space, I made each item fixed wide, and I have 5 pixels left over. So I stuffed the ul on the left with 3 pixels, which gives the effect of the centering menu bar. The menu bar has a background color applied. But now I have a 3 pixel on the left (and 2 pixels on the right) space which is white space. How can I get that white space the same color as the menu bar? I tried to apply a color to the div menu bar, to the definition of the ul and put a div around the bar of menus together, but none of these works. Is it possible to apply this background color so that the entire line is the same color?

  Thank you

  Mike

  In the sections, change it.

  {#menu}
  background-color: # 526-39;
  }

  on this subject.

  {#menu}
  background-color: # 526-39;

  overflow: hidden;

  Zoom: 1;
  }

• Planning menu does not appear in the workspace

  Hello
  
  I try to install EMP 9.3.1.
  
  Until the installation of Planning, everything was fine.
  Now, I'm working on the installation of Planning. In the workspace in the menu 'Navigate' i've got the issue of 'demand', but when I select it I see a small empty menu.
  
  I checked that Web server include planning.
  In the config log I saw this message
  
  "
  (July 21, 2009, 08:13:50), com.hyperion.cis.config.ant.AbstractAntConfigurator, WARN, try to set an EMPTY value for the Ant [apache2.root] property. Ignored. »
  
  It seems that apache are not correctly set but left i0ve by default.
  
  Any suggesition?
  
  Best regards
  DecaXD

  Try this:

  Open your planning with planning Web console application,

  Administration---> ApplicationSettings--> Shared Services registry.

  Open Configuration utility;
  Choose:
  Reporting and analysis
  -Configure the Web server and make sure that you go through these steps successfully. (Do this even if it has already succeeded when you made this earlierl)

  and check if you can see through the planning workspace.

  Hope this helps!

• 11g: contextual events - how I fires on the change of currency?

  Hello!
  
  After posting a question here: 11g: bounded task flows, need help and advice!
  I read the article on http://technology.amis.nl/blog/3365/adf-11g-how-events-in-one-region-cause-other-regions-to-refresh because I need to refresh region B when the user selects in the region A.
  
  Now, the comments in this article suggest that contextual events are the mechanism built for that use case. So I tried that first. Online help suggests that this is what I need.
  
  I have read online help and created an event and defined a producer and consumer card in the case where in the page of def. in the parent aid now shows how to raise the event when a methodAction binding is executed. But I need to raise the event when the user selects a row in the table of A region.
  
  1. How do I do that? Where do I put the event? Aid says it is possible, but does not show how. Add a selection listener to support bean and call the event link from active methodAction from there? Or is there a better way?
  2. I feel, that - when I use the event to call the ExecuteWithParams method binding consumer - just the VO of the consumer query is executed. That's great. But how to reset the stream to the original action? Just refresh the VO is not enough. I need to reset the stream to the original action (showing a view).
  
  I read http://www.oracle.com/technology/products/jdev/tips/fnimphius/taskflow_in_popup/taskflow_in_popup.html and now I'm completely confused. Use the input parameters or events? If I use events, how to reset (refresh) the task flow?
  
  Thank you
  
  Sascha
  
  Published by: Sascha Herrmann on October 19, 2008 15:33

  Sascha,

  prices area A action B the same transaction? If so and the contents of box B is a dependency of the VO used in A so you have contextual events at all. So if I guess this A region contains a list of departments and region B the employee table (where DepartmentsVO is the parent of EmployeeVO) then do the following

  -Navigate to the definition of region B region in the file pageDef
  -the right mouse context menu allows to add parameters and then a parameter (for example changeIndicator)
  -thread the parameter changeIndicator to the current line of DepartmentsVOIter key str (it's an exposed method directly on the iterator)
  -Set the region to ifNeeded binding refresh
  -set a partial trigger on the regionB to point to the departmentTable for the region is updated whenever the table changes line

  The parameter that you added just does nothing except it tells the region that binds the region needs to refresh. You that he point to the key of the iterator Department line because it provides the changed value.

  If regionB VO is not dependent on the DepartmentVO, then you need create a setting on the taskflow bounded, which takes the value of changeIndicator to write it in pageFlowScope.currRowKey. Then create a currentRowWithKey method that is defined as a default activity and it wire up to pageFlowScope.currRowKey

  Frank

• My Hp Slate Tablet Wont turn on HELP!

  I recently bought a hp slate 7tablet 2 days ago and its doesn't turn is not on. As I put it to load, but it won't turn. I tried to load it into a different power outlet, but nothing happens. I know for sure the plugs work fresh body of my mother her phone to the Jack of all I tried pois it you PLEASE someone TELL ME HOW TO TURN IT ON AGAIN!

  Try to keep the power, volume up and volume DOWN all pressed at the same time for about 20 seconds (or until you see a menu appear).

  If you get the menu, navigate using the volume switch then select "Reboot".  See if the Tablet starts normally.

  In addition, if you have another convenient micro-USB cable, try using it with the charger supplied with the Slate7.  It is possible that the original cable have been damaged.  Do not use a cell phone charger because they are not able to provide enough "juice" for the Slate7.

  WyreNut

• Ethernet controller and yellow '? -cannot update the driver

  Has had a prob with this for awhile, but never needed so far. I tried to use my daughters mp3 and it would not recognize the device.
  I have more the xp that he keeps asking to repair the disk driver. I tried called driver free downloads but none is free and surely Toshiba should have free updates.

  My lappy is a TOSHIBA Equium A100-147 PSAABE-00800EAV

  Can anyone help as I just ordered him a video player mp3/4 fancy and I want to be able to use it to transfer music!

  Appreciate any help.

  your pete.

  If you are looking for your Equium A100 WXP LAN driver you can find HERE.

  Download the driver and unzip the files into an empty folder on desktop
  Go to Device Manager and click with the right button of the mouse on the Ethernet controller
  Choose Properties option
  Click Update driver and follow the on screen menu
  Navigate in some folder on the desktop and proceed with the installation of the driver

  I hope that the LAN driver is correctly installed.

• I get this error message: Code 80070663

  I get this error message: Code 80070663 and it seems that there is no solution for it to what tells me the support. Please give me a process step by step in order to fix this problem please!

  Step by step this path below that can help you to correct the error.

  Click on the "Start" button, type "Windows Explorer" in the search box.
  Click on the "Windows Explorer" in the "Programs" menu
  Navigate to the path "c:/users/Allusers/Microsoft/Office/data", find "opa12.dat" file and rename it to "opa12old.dat".
  When you restart Windows Office and open a file, it prompts you to turn on the Windows desktop, then activate it online.
  Reinstall the updates from the Windows desktop, and then restart the computer.

  This solution of error on this site:
   http://www.regmender.com/how-to-fix-Windows-Update-error-80070663.html
  Hope it can help you. Good luck.

• Pip indication AF noise

  E60D - various Canon lenses

  Is it possible to cut the autofocus sound indication 'pip '?

  This noise is very disturbing in a quiet environment, & ne

  seems necessary in view of the Red Flash of light.

  You said E60D which I think means EOS 60 d.

  In this case... Press "Menu", navigate to the camera Red 1 tab (there are 4 tabs on Red camera on top).  This is the 2nd low row labeled "Beep".  Change to "disable."

• Pavilion HPE: Obtaining a recovery media for your desktop HP custom build

  I replaced my SSD drive failed in my HP Pavilion HPE I bought in July 2012 and seeks to
  do a system restore for a restoration of the value I created before the break.  I start the PC with the first DVD-R disk in the drive (by car I used for the set), press ESC to enter the boot menu, navigate to the Boot Menu to select the /SATA2 option Legacy Boot Sources/ATAPI CD/DVD Drive option.  The result I get is:

  "Intel UNDI, PXE - 2.0 (build 083)
  COpyright (C) 1997-2000 Intel Corporation
  For Atheros PCIE Ethernet Controller v.2... 1.9.9(08/12/11)

  Check the connection of the cable!

  PXE - M0F: Exit Intel PXE ROM.

  ERROR: no boot disk was detected or the drive failed. »

  The drive fail as failure.  I read on another computer very well (open files, view file properties, copy the folders and files).  For a smile, I put an old XP Recovery disk in the drive of the computer, I'm trying to restore and he was able to read that.

  Whatever it is, I try to order recovery disks by following the link on this page:

  http://h20565.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-bph07143&sp4ts.Oid=52...

  This page asks me to provide a specific model number.  I don't have because it is a customized version.

  It's on my list of selection information:

  > YOUR
  > CUSTOM HP PC
  > h8t
  > • Windows 7 Professional (64 bit)
  > • 2nd generation Intel Core i5 2400 quad-core
  > processor [3.1 GHz, 6 MB cache]
  > • FREE 6 GB DDR3 1333 MHz SDRAM [2 DIMMS] UPDATE
  > 4 GB
  > • 1 TB 7200 RPM SATA hard drive
  > • No secondary hard drive
  > • SAVE $40 on Microsoft Office Home and Business
  > 2010
  > • No additional security software
  > • 1 GB DDR3 AMD Radeon HD 7450 [HDMI, DVI, VGA via a
  [> adapter]
  > • 300W power supply
  > • DVD SuperMulti burner
  > • LAN wireless-N (1 x 1) card
  > • 15-in-1 reader cards, 2 USB 2.0 (front), 2 USB
  > 3.0 (top)
  > • No TV Tuner
  > • Beats Audio (tm) - a built-in studio quality sound
  > • Premium HP keyboard and optical mouse
  > FREE • Adobe Premiere elements and Photoshop 10 [$149
  [> value]

  If I can't use the recovery set I did, how can I get a proper HP for my setup recovery disk?

  Hello

  A 240 GB SSD is large enough for the support of HP recovery work.  Order the HP support.

• Hello. Does anyone know why a dot on my videos but not my photos? Thank you.

  Hello

  I'm pretty new to DSLRs and I have a strange problem, I hope you pros can help with

  I recently had a canon t3i and use it mainly for video. A small dot (see below, in the yellow circle) has appeared in videos. It is always in the same place and it did not exist before. At first I thought there was something on the lens, but no, and the strange thing is, the point does not appear when I take still pictures, only videos.

  Nobody knows what this could be and how can I get rid of him?

  Very appreciated

  Vlaminck

  

  This likely dust on the sensor – don't be not alarmed, it is ordinary and easy to clean.

  There are actually two filters in front of the sensor - then 'dust on the sensor' is really the dust on the filter (nothing can really touch the sensor.)

  Most of the models of rebels have a self-cleaning - mode but it uses a piezoelectric effect vibrates the filter and I hope only to shake loose dust.  He used to always work.

  If this does not work, you have two options... it take a photo shop to clean (some stores may practice you a little money... even if I've heard of places that charge customers $50 - I think that's quite excessive.)  The other option is to clean it yourself.   If you do a lot of photographry, you can learn to do it yourself as well because it is something you will probably need to do from time to time.

  I have levels of aggressiveness that I use to clean a sensor... start by simply using the puffs of air (not very aggressive) and working my way up to the point where if nothing works otherwise, I could have possibly used the wet cleaning (but is almost never necessary.)

  Remove the lens, point the camera down so that the aperture of the lens is facing the ground (or resting on a table).  Turn on the camera, use the menus and select the self-cleaning option.

  See page 184 of your manual.  Basically you press menu, navigate to the #2 yellow key and navigate to "sensor cleaning".  Call the "Clean now" option (you may need to do more than once... but if it is not clear after 2-3 attempts, then the time to move to the next step.)

  By the way, to check if it is clear, put the lens on.  Set the camera to Av mode, compose a value large aperture (f-stop) - say f/16 or f/22.  Now, find a simple white wall (or ceiling) and take a picture.

  It is the sensor dust easy to spot VERY when you have a white non-contraste surface like a white wall or a ceiling AND use a high value of f-stop.

  It is clear, very well.  You are finished.

  If this isn't... next step is to get a hand blower - squeeze - like a Giottos "Rocket Blower.  I do NOT recommend you cans of compressed air.  These boxes will spray a residue (fuel) on the filter if you do not pay attention and then the filter should be cleaned at the wet.

  Access the menu cleaning sensor itself, but instead of "clean now", choose "Manually clean".  This causes the camera to raise the mirror and open the shutter to expose the sensor (really the filter).  Keep the camera pointed down and apply several puffs of air into the camera.  DO NOT let the tip of the fan touched anything inside the camera (otherwise you can mark or scratch the filter and make things worse.)

  If that is not ALWAYS clean, I use a magnifying glass to inspect the sensor to see what I'm working with.  You can buy these brands such as "Sensor scope" and they are inexpensive.

  My next step is to try a VERY soft brush to see if he brushing.  Use without pressure... just a few features very soft and very light should do.

  If none of this works, then it's time for the wet cleaning.

  Buy brand Eclipse cleaning solution (made by "Photographic Solutions, Inc." and transported in more real camera stores (not department stores that sell cameras).  You can also order online.

  You will also need the right size, cleaning swab.  This same company (Photographic Solutions) makes "Sensor swabs" but they come in sizes to fit your sensor.  For cameras with sensors APS - C size (which is what you have), you want a buffer of size of Type 2 sensor.

  OK... the purpose of this next step is do NOT damage your camera buy waste of money (not... "I'm not kidding actually.)

  You will place about 2 drops of Eclipse solution on the end of the cleaning swab.  You use the swab to sweep from one side to another sensor using almost no pressure.  Eclipse is almost pure methanol, evaporates quickly and leaves no residue.

  You will now be IMMEDIATELY discard this swab.  (this is what I mean about the bit 'wasting money').   There are 12 buffers in a box.  You can use a couple of them to clean the sensor.  They are cheap.  Your camera is not.  Do NOT try to save money on cheap disposable pads and risk damaging your camera - because if this swab picked up a little sand, would you scrape little sand on the sensor by reusing the it.  That's why I suggest using almost no pressure AND why I suggest to use the scope of the sensor to inspect the sensor and see what I'm working with.

  A sensor cleaning is not difficult, and if done right, it is not even dangerous.  But if you take anything to him as you have been cleaning a window, then you could make things worse (and potentially expensive to correct.)  Just go slowly.  Inspect everything.  I ran with the assumption that all which is on the sensor will scratch if I do not pay attention (even if most of the time this isn't true) and very light pressure allows to "tease" the offending bit of dust on the sensor.

  When you are finished, simply turn your unit on and put the lens on.  It automatically closes the shutter when you press the power switch.

• I got negatives on a CD. The instructions say to "run the Photo on the CD Viewer '.» How can I do this?

  I got the negatives on a CD instead of local printing. The instructions that came with the CD says: 1) Insert the CD into your computer [what I did];

  (2) run "photo Viewer for Windows: on the CD." Use the photo viewer to see photos & save them to your computer.

  [I did not #1 because I do not know how to do "... on the CD" etc etc] [Can someone tell me how to make this you?]

  If J tips do not help, download and install IrfanView (it's free).  Start IrfanView, click file > open, navigate to your CD-ROM drive, and then select the first file.  Once the file is open, you can use the left/right arrows in the menu bar of IrfanView to come and go through your negatives.

  You will see that IrfanView is a very powerful and versatile image viewing application.  Among other things, you can display many different types of image files, conversion between types (for example, to convert a BMP to JPG file) and resize the image (useful for emailing) files.

  Although you could save the files you open and view them by clicking file > save on each of them, it is easier to save all the files at once:

  • Put the CD in the drive
  • Open my computer
  • Double-click the icon for your CD drive
  • Click Edit > select all
  • In the right pane, click "copy the selected files.
  • In the context menu, navigate to the location where you want to save the files (probably in my pictures - you will need to click on the + sign next to My Documents to see)
  • Click the copy button