Menu of startup appears but does nothing

Similar Questions

• When I try to download Illustrator, the download screen appears, but does nothing, what to do?

  When I try to download Illustrator from my account alls well selection until the download.  Nothing happens.  No progress bar.  The screen does not freeze, there is simply nothing.

  Try using another browser.  Sometimes, it helps.

• I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.

  I have a new hp running windows 8.1 in turn and have tried to install the adobe reader software.  The installer downloads (1) and I choose to run it, but it is just a blank screen appears.  I checked the Task Manager and it takes memory, but does nothing.  After you let it run for 3-4 minutes, I kill the task.  What can I do to get the player installed on this machine?  I tried using chrome, firefox, and explore and get the same results with everyone.

  Try the Installer http://get.adobe.com/reader/enterprise/ offline

• The download arrow button down is visible, but does nothing!

  Hi, until yesterday, I could click on it to view the current status of download. Now only ctrl + J works, (never used this before today) but it opens a new window and is not what I would call a fair vs shortcut by clicking the arrow. The button still animates when click on it, but does nothing...
  Someone knows why this month that's happened?

  Hi FInku, please try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

  Thank you

• Password accepted but does nothing (admin) user. Locked user account? How can I register as a Admin to change?

  Had problems with Solution Explorer. While changing this and that, I blocked the user accounts. My password is not rejected, but does nothing. How can I get as long as a tool fix my problem?

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  [Note: do not enter the brackets!]

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Remove the installation/rescue DVD and restart the computer. Now, you will be able to log on to the built-in Administrator compatible account now and make your changes. Once you have fixed things, connect to your additional administrative account (implemented by the recommendations below) and disable the administrator built-in again for security reasons.

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
  MS - MVP - Elephant Boy computers - don't panic!

• I have a reconditioned Ipad4 64 GB and me put in place today, but it keeps going blank and then showing just the Apple. Have tried to quit, but does nothing:(delesde idées)

  I bought an iPad 4 64 GB with 4 d and have put in place today, but the cry keeps losing information and goes blank. When he decides to turn back on an Apple appears but then nothing? Did have to operate for an hour today. Not the owner of an iPad happy that I have improved my original iPad to do this. Help, please

  Where the iPad was purchased at?

• menu of startup appears

  Hello.

  I have a ' inflated until ' Mac Pro 2010 with two SSD, one for Mac OS X and other for Windows 10. everything worked very well in the three weeks I got it, but the death of my Apple screen, I bought the iiyama ProLite B2783QSU-B1 and have connected it via HDMI.

  Until last night, he spent his first hours out of the box luckily display the start menu so I could choose between Mac OS X and Windows 10. The start menu was not really low resolution, that it bothered me, but since yesterday evening, the iiyama ProLite will not show the start menu, so I press the cursor button once to the right for Mac OS X and just enter for Windows 10.

  I'm mostly okay with that, but I'm curious.

  Is it possible to force the boot for more high resolution menu?  Someone else comes through this?

  Thank you

  Sarah

  Hello

  You cannot change start menu settings, and this issue probably from display, as the Mac Pro automatically detects it, as all HDMI devices, the resolution of the screen.

  If you don't find a solution to your problem, I suggest you try another HDMI monitor and if it works normally, try contacting iiyama on fixing their display.

  I can however suggests that instead of bring the start menu every time, you change the boot disk in each operating system:

  • If you want to go to Windows and Mac OS, go to System Preferences: Startup disk, select the Windows Player 10 and select "restart."
  • In Windows, (install the Bootcamp assistant, if it is not done) and right-click on the icon of bootcamp to the right of the taskbar, then select "restart on OS X.

  I know that this does not solve the problem, but it is a workaround.

  James

• Coupon boyfriend appeared but does not appear in addons or extensions.

  That's what gets me. I have not installed toolbars - NONE. I've been on the Web download NCH site a version beta of beginnings and noticed in the upper corner of the screen number R three in what appeared to be the angle of a roll back page paper. I'm curious because it seemed out of place on the Web page, so I clicked on the number 3 and walla a small window appears with the announcement that they had located three coupons, sure I could look.

  There are no toolbars installed and none in the list of addons. There is nothing remotely involved wit toolbars in the list of extensions.

  Where oh where did this thing come and where I go to get rid of it. It's worse that crapware that obviously has dug in the system settings some how. At this point I saw this thing once, and I think of as a nuisance that threat. But, if anyone has found a way around the areas that we normally look to prevent this kind of infamous for marketing we have a problem in grass in the Department of malware. I hope that someone has had a similar experience and can offer advice.

  OK, many thanks to all who helped this old geezer and an old geezer I am.

  I was just on Newegg once again and no more Couponbuddy. Hooray!

  Once more the world I thank you all for your time and patience.
  I will close this as resolved problem.

• OfficeJet L7780 "alignment", but does nothing

  I just installed a new printhead in my 7780, because he was out of yellow ink. The printer is trying to line up, a message appears saying that the yellow ink is always outside, encourage me to "press OK" to cancel the job and then the screen is stuck on the screen "alignment", but nothing happens. Please notify.

  The printer that you have printheads and ink cartridges both being separated in 2 different places on the printer.

  For example, it is your printer here: Correct?

  

  And here's the ink cartridges and where they are located in the printer.

  

  I think that you replace the print heads when the ink cartridges need to be replaced.

• V5 - 431 froze. Now the diagnosis but does nothing else. Rest at night.

  Computer froze up and had to take the battery out. Now he says it is pc diagnosis. Tried 3 times now, but still do nothing. Tried to do during the night son tried to get into the advanced in vain. Got it running diagnose again. What I can do and why this happened. Thanks much for any help. Oh, she also downloaded Windows 10 last week could not stop him.

  If it was the only windows... Why freeze again?

  I repeat, it is a HARD drive problem.

• In Printer preferences group policy: printer appears but does not define itself by default

  People,

  I have my shared network printer installation group policy preferences. I have ensured that the Restrictions point and print are disabled in the parts of the user and the police computer. Each preference has a targeting rule that identifies computer names to apply this printer too and also users run in the security context is selected, both the game as default printer checkbox is checked. Mappings check only 1 printer is defined as the default value with pc.

  When a computer maps the printer on the initial user connection (IE when their roaming profile is created), it appears in the list of available printers and devices, but it is not defined by default. It gives an error when you try manually set as default: 0 x 00000709. I looked into the case of the newspapers that I see that the reason is not defined:

  The following information is part of the event: user, , printers by default {AA8B60B5-0555-45BD-9A8F-FAFA4D3DB7D8}, 0 x 80070709 the name of the printer is invalid...

  I looked at the registry of the user and NO connection string is displayed in HKCU\Printers, as I expect the error!

  If I then remove the printer from the list by right-clicking and choosing to remove the instrument and then type GPUPDATE to refresh policies, the printer is remapped and made the value by default as I expect. Once this has been done the printer seems to work for subsequent connections by the same user.

  If you don't remove this error persists.

  Anyone know what is happening because of the initial connection to fail map the printer properly?

  Thanks for any help,

  Martin Searle

  Developer of desktop platforms

  University of Kent, UK

  Hello

  The link below is better suited for your question on the preferences of the printer in a group.

  Please post your query on the printer preferences in a group by clicking on the link below:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps!

• Lightroom 5.7.1 icon in the menu of tools down but does not open fullscreen

  When I double click icon of Lightroom 5.7.1 it open icon in the tools at the bottom of the screen menu and when I move the cursor over the icon, a small window opens above the slider, but is not full screen so I can read what it says.  So I can't open it completely.

  I have a PC running Windows 7 Pro 64 bit and re-installed Lightroom 5.7.1 and ran repair and it will not even go full screen so I can see what the small window.

  Hi photoBeard,

  Please reset the preferences of Lightroom 5 suite to retrieve the catalog and images after resetting preferences in Adobe Photoshop Lightroom , and let us know if this helps.

  Kind regards

  Assani

• When you edit a composition in the browser, click the button is there but does nothing.

  I'm testing a site in my browser edition a publication. I see edit it and click the buttons on the triggers, but the click button does not take me to his bed or a link. Is it because I am trying to edit on my own computer rather than the customer is going in? I need to see how this feature works if I put it to my client to change a slide show or a composition.

  Thank you

  Hello

  Edit on your computer makes no difference. You should be able to change it on your computer. What is the URL of the site?

  Kind regards

  Aish

• Plugin check says WacomTabletPlugin needs update, but does nothing when I press on the link

  I run Plugins check and he says that the Wacom tablet Plugin should update... when I click on the link nothing happens.

  Hello, this should be the right link to download the updated plugin:

  http://www.wacomeng.com/web/fbWTPInstall.zip
  http://www.wacomeng.com/web/WebPluginReleaseNotes.htm
  

• Windows 10 will not be cut, it sticks on the screen saying 'cutting' rotation but does nothing

  So this happened to me last night, he kept on spinning and spinning when I try to restart it it is never turned off just keeps turning, I can do? I tried to press the power button / stop + shift lift the thing to solve problems and get a recovery of the system at the previous session, but I couldn't because it goes back to the screen of spinning

  Press and hold the Power button until the computer turns off. Then you should be able to use Windows.

  From what you say, it seems that you put the Mac to sleep instead of turning it off, which is you see the screen to spin again.