menu of the monitor 4 k to small - change the font in the UI at LARGE does not improve. any ideas?

Similar Questions

• Pencil tool (N) close the trace does not work, any idea?

  Pencil tool (N) close the trace does not work, any idea?

  with the completion of a path with the pencil tool, I don't get the small circle at the cursor level to close the path.

  Zoom click on the pencil tool in the tools Panel and you will see.

• The product key entered does not match any available window images, please enter a different product key

  Original title: complaint of Microsoft

  Dear team,

  Please note that we had bought a laptop Lenovo S 405 of Croma store located at Silver Bow Ludhiana.

  Type of machine:-IdeapadS405APGRTXA84555M4G5008EIN(20196) mode

  Machine Type No.:-59348194

  Serial number of the machine: -.

  Laptop provided with the integrated Windows 8 homepage unilingual, we tried to remove formatting the hard drive & then tried to install Windows 8 PRO that was purchased separately, but the system does not work, system displays a message error that says "the product key entered does not match any available window images, please enter a different product key

  Ask you please help to solve this problem

  Anticipating a quick answer on the same

  Thanking you,

  Yogesh clavreul,

  +

  Hi yogesh,

  This problem could be due to the fact that the product key provided does not match the press which is used to install Windows. The product key that is provided can be a file without assistance, in a. EI. CFG file, in the PID.txt file or in the BIOS firmware. Windows OEM 8 machines ship with the product key in the firmware, and if this product key does not match the press, then you will see the above error message.

  You are able to start after receiving the error message on the screen?

  I suggest you to change the product key to the correct for the media you are trying to install. If the system has a product key in the motherboard (o. a. 3.0 [Activation OEM] provides an OEM product key in the firmware), you use an Unattend file, file (EI.cfg) edition Configuration or the product ID file (PID.txt).

  You can check the link:

  «Windows 8 or Windows Server 2012 installation may fail with the error message: the product key entered does not match any of the images available for installation Windows.» "Enter a different product key"

  http://support.Microsoft.com/kb/2796988/en-us

  For reference, you can check the link and follow the steps proposed by Steven on 24 January 2013:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404B-9b7f-2065bdb91011

  Please let us know if the problem still persists.

• keyboard driver and the mouse does not, uninstall driver does not work, any ideas?

  Just bought a sony vaio and have the driver of keyboard and mouse not working, uninstall the driver does not work, no idea how to solve this problem

  Hello

  Exactly how you are trying to install the driver?

  We will analyze and identify the cause of the problem. You can connect a keyboard or an external mouse and check.

  Method 1: Hardware store.
  

  Run the troubleshooter of material and check if it works.

  Follow the steps to run the Troubleshooter:

  a. press the keys Windows + C on your keyboard to show the charms.

  b. type Troubleshooting , and then clicksolving problems under settings.

  c. now, type Hardware Troubleshooter in the optionSearch .

  d. click convenience hardware store to run the troubleshooter.

  Method 2:

  You try to install the drivers on the manufacturer's Web site and check with the question.

  http://www.Sony.co.in/section/support

  Note: Search the driver by using the model number and download the latest driver.

  Reference:

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-in/Windows-8/why-isn ' t-windows-conclusion-device

  Hope this information helps. Response with status so that we can help you.

• Online games, when they pop up, they are so small, you can barely see them. I just downloaded Win 7. And I tried to adjust the themes Aero back to basics. But it does not work. any ideas?

  Yet once, when I go to online games and most of those who pop up a new window, the game is so small, that I can barely see it. How to fix this. Tried to compensate for the Aero themes, but it does not work. What I missed... Any ideas how to change these sizes?

  Hi MaureenAnn,

  Welcome to the Microsoft Answers Community Forum site!

  In order to resolve your issue, please provide additional information;

  1. What is the game you are trying to play?
  2. Faced with this problem while playing games?
  3. It works correctly when you play a game stored on a computer?
  4. Was there any recent changes/updates / drivers installed on your computer?

  If you are facing this problem, only with online games, suggest to enlarge the page by clicking on the icon zoom on the lower right of the browser.

  Allows you to change the screen resolution by clicking Customize desktop by right-clicking on the desktop.

  In addition, we suggest you to optimize internet Explorer and check if it solves your problem. To optimize internet Explorer, I suggest you visit the below mentioned link.

  http://support.Microsoft.com/kb/936213/

  I hope this helps solve your problem!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• Open the link in a new window does not. Any ideas how to fix?

  Hello

  I created this Web site

  Haven of the legends

  On the Club of mountaineers page there are links in the text, I clicked on the box in the hyperlinks to enable the option, but the link opens in the same window.

  I tested it on Chrome and Safari and get the same result with block popups checked and unchecked.

  Help, please.

  Jason

  Hello Jason,

  I tried to reproduce the problem at my end, but it works very well at my end.

  I would like to take a look at your .muse file, please send it to me through via Dropbox or any such similar service.

  Please share the download link of file in a private message and for this hover just mouse over the username and click on "message".

  Best regards

  Ankush

• cannot install CS6 upgrade I got the mobile experience LR and serial code does not install any ideas?

  message reads not able to validate the code after entering serial no

  Robert,

  Please see this link on the issue of validation:

  https://helpx.Adobe.com/Creative-Suite/KB/unable-validate-serial-number-CCM.html

  Guinot

• The apple tv icon does not appear in the menu bar

  The apple tv icon does not appear in the menu bar. I can't put my screen on my TV mirror.

  Required to use AirPlay

  If you go to the Apple menu > System Preferences, click on monitors and do not see the option to "See the mirroring of the options in the menu bar when it is available," your Mac does not meet these requirements.

  Minimum requirements if your Mac and Apple TV are on the same network:

  • Apple TV (2nd generation or later) with the latest version of the Apple TV software
  • For mirroring of your screen to display your desktop, one of the following computers Mac with OS X Lion mountains v10.8 or later version:
    • iMac (mid 2011 or later)
    • Mac mini (mid-2011 or later)
    • MacBook (early 2015 or later)
    • MacBook Air (mid-2011 or later)
    • MacBook Pro (Early 2011 or later)
    • Mac Pro (end of 2013 or later)

  Minimum requirements for peer-to-peer AirPlay, which allows visitors to quickly and easily connect their Mac or an iOS device to your Apple TV without getting the passwords and connection to the network Wi - Fi:

  • Apple TV (3rd generation Rev A, model A1469 or later version) with the latest version of the Apple TV software
  • Mac with OS X Yosemite v10.10 or later version (2012 or later)

• The viewer or split display problem: I am getting small white boxes (similar to those seen in the browser) superimposed on my photos. Any ideas how to fix?

  The viewer or split display problem: I am getting small white boxes (similar to those seen in the browser) superimposed on my photos. Any ideas how to fix?  There must be a display problem in the software.

  Have you of the 'show Talking Points' enabled in the view menu? Then you can see small white boxes superimposed on the image in the Viewer.

  

  You can enable or disable on / off power with ⌥F talking points.

• Firefox does not open any window, on the menu bar that appears only in the menu "Firefox".

  This is happening to me since OSX Yosemite. Always the same in ElCapitan. Tried to remove and clean install FF, without success. I can't access what anyone, it does not open any other window, no preference do nothing.

  Hi again,

  no window-> no Burger.

  In the meantime, I was able to fix: FF installed in SafeMode to OSX. It works for me now in El Capitan, previously in Yosemite, it had no effect.

• Change the source of entry with the Caps Lock key does not

  It should be possible to change the input source with the Caps Lock key on macOS Sierra.

  and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.

  However, it does not lock shift still only works as long as CapsLock

  I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.

  I use only the default input source and have not installed and related programs to the keyboard or input source.

  Can anyone help?

  Thanks in advance.

  Greetings slwsbl!

  Thank you for using communities of Apple Support.

  I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.

  It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
  
  

  Switch between input sources

  To switch between input sources, do one of the following:

  • Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.

  • Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).

    To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.

  • Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.

  Best regards.

• Favicons repeat through tabs, behind the label text when you switch between tabs. 37.0.1 sometimes the Green scroll bar does not have too

  Please mention the attached JPEGS. When I switch between tabs, favicon image repeated behind the text. In some cases, the image of the vertical scrollbar is messed up, it cleared up when I click on it. -Does not appear to affect performance, simply annoying. Thank you!

  Please temporarily disable your Avast extension to see if it has to do with it.

  Try Firefox Mode without failure:

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Satellite C650-197 built into the Microphone and Jacks does not

  As the title, I tried to use the microphone that comes built-in on this model (Web camera VGA integrated with built-in microphone) and found his does not work. I tried to plug in an external microphone via the microphone jack and still no registration.
  I can't seem to find the drivers for the integrated or plug anywhere.

  Any ideas?

  Hello

  > I can't can't find the drivers for the integrated or plug anywhere.
  This drivers don t exist. The sound card driver controls everything.
  I think you should first start the webcam software and should test the microphone because the internal MIC is part of the webcam.
  Webcam software provides a tab; settings and properties. In one of these tabs, you will find settings for the audio.
  Here, you can increase the volume of the microphone and was able to record a small audio session.

  In addition I recommend the settings in Control Panel-> sound.
  Make sure the microphone volume is set to maximum. Don't forget to check the hidden devices and disabled it there...

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services