menu of the tool bar are not visible

Similar Questions

• Help please! After the installation of el capitan, the anchor points are not visible in illustrator CS5!

  After the installation of el capitan, the anchor points are not visible in illustrator CS5. What can I do?

  Sun,

  Outside of this (possible) case, there is no report confirmed the successful performance of CS5 on El Capitan:

  Illustrator CS5 quit unexpectedly in mac os x 10.11.2

  Are you sure that you have shown (alternating with Cmd + H) edges?

• The task bar is not visible

  title original: TASK BARR NOT VISIBLE

  MY PC TASKBAR AND START MENU IS COVERED BY THE FOGGY GLITTERING BAR. HOWEVER I CAN ACTIVATE THE MENU START AND OTHER WINOWS ICON ON WHICH I WORK BY NAVIGATION CURSOR BLINDLY. I TRIED TO FIX IT BY DIDN'T SYTEM RESTORE, BUT IT WORKED

  Try to update your display driver:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  You may need to download the latest version of the driver from your computer manufacturer "s support Web site:"
  How to upgrade Windows Vista drivers
  http://pcsupport.about.com/od/fixtheproblem/HT/updatedrvvista.htm

• When I have several tabs open, I only see the tab that I am in, all the other tabs are not visible at all.

  I only know that there is more than one tab open because when I click in the empty space on the tab bar appears the other tab. then the one that I've been on disappears, until I click in the space were is was before. ?? ....

  Help, please!

  Thank you very much

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• 1inc Strip everywhere at the tool bar does not with the mouse... all else ok.but cannot sign out of mail ' cos in this band

  1inc band less than search and bookmarks... nothing doesn't work with mouse inside so can not disconnect because déconnexion comes in this band... can not scroll top because arrow in this band.everything otherwise ok. Google and internet explore is ok... everything works fine for them only on mozilla firefox... which is what I use all the time

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• 38.0 I lost before, reply/ReplyAll is a mess and customize the tool bar does not help. Help

  If automatic installation of 38.0 left the above problems. Customize either is not what I want or drag on the toolbar. At least I can return to v37? I do not understand the merits of v38 which means, in my opinion, I don't not need them!
  Quite separately from what the above I have a problem with my overflow of memory for temporary periods, even when I'm not demanding any activity. I installed more memory, which aleviated the problem briefly, but all of a sudden, a few weeks ago he's back. I did tests antivirus nothing helps. When this happens it is always Mozilla and Thunderbird as top of the list of activities and I am tempted to re - install. I'm going to do a back-up first but prefer not to rely on what I haven't tried recovering from a back-up. Specifically I need to take measures to protect and preserve the history of my email? And addrbk?
  Thank you in anticipation of any help.

  I was using version 38.0.1 and did not experience the problems you describe, but there can be other personalized preferences etc. accumulated over time that the difference between your profile and mine.
  Yes, the answer may have looked like manual, but it's usually the fastest method to get the corrected results.

  I am now using the latest version 38.1.0 and currently is not undergoing problems.

• When I connect to my outlook account, all the links in the upper part are not visible, and when I try to click on any of my emails, nothing happens.

  I've updated my browser and still get the same results. Sometimes, after refreshing the page several times it will appear.

  This occurs in safe mode?

  • Firefox in safe mode

  Have you tried clear your recent history?

  • Recent history of claire

  Also, try to check your plugins:

  • Plugin check

• Disk groups are not visible cluster. vSAN datastore exists. 2 guests (on 8) cluster do not see the vSAN data store. Their storage is not recognized.

  http://i.imgur.com/pqAXtFl.PNG

  http://i.imgur.com/BnztaDD.PNG

  Do not know how even tear it down and rebuild it if the disk groups are not visible. The discs are in good health on each host storage adapters.

  Currently the latest version of vCenter 5.5. Hosts running 5.5 build 2068190

  Just built. Happy to demolish and rebuild. Just do not know why it is not visible on the two hosts and the disk groups are only recognized 3 guests when more are contributing. Also strange that I can't get the disk groups to fill in vCenter. I tried two different browsers (chrome and IE).

  I have now works.

  All the identical 5.5 relies on ESXi hosts. All hosts are homogeneous CPU/sum of the prospects for disk controller / installed RAM/storage.

  I have work. I had to manually destroy all traces of the vSAN on each single to help host node:

  (1) put the hosts in maintenance mode and remove the cluster. I was unable to disable vSAN in the cluster, I made on each node host (manually via the CLI below) then disconnected web client vCenter and return to finally refresh the ability to disable on the cluster.

  esxcli vsan cluster get - to check the status of each host.

  esxcli vsan cluster drop - the vSAN cluster host.

  storage of vsan esxcli list - view records in the individual host group

  esxcli vsan storage remove-d naa.id_of_magnetic_disks_here - to remove each of the disks in the disk group (you can ignore this using the following command to remove the SSD only falling each disc in this host group).

  esxcli vsan storage remove s naa.id_of_solid_state_disks_here - this is the SSD and all the magnetic disks in a given disk group.

  After that, I was able to manually add hosts to the cluster, leave maintenance mode and configure the disk groups. Aggregated data of the vSAN data store is correct now, and everything is functional.

  Another question for those of you who still read... How to configure such as the VM storage strategy that migrates towards (or inspired) the vSAN data store will immediately resume the default storage policy, I built for VSANs?

  Thanks for anyone who has followed.

• In good company the child elements of the element without terminals are not visible.

  Hi all

  Jdev version 11.1.1.7.0

  I am facing a company in good standing question...

  Scenario: I create approval Service (BPEL) with flow of human labor and the Bunises rule.

  I'm assingning HW participating using the rule based (HW and BR connection).

  Problem is:

  Shema has element 'unbounded '.

  < name of item = "ExpenseItem" maxOccurs = "unbounded" >

  < complexType >

  <>sequence

  < element name = "ItemID" type = "string" / >

  < element name = "ItemName" type = "string" / >

  < element name = "ItemPrpjectID" type = "string" / >

  < element name = "ItemStatus" type = "string" / >

  < / sequence >

  < / complexType >

  < / item >

  Whenever I have create a Busines to configure rules.

  ExpenseItem rules setting up the child elements are not visible. But those who are required to configure rules.

  If you can help solve me would be useful.

  What is a behavior bedault of the BR? If yes how can I do this?

  Thank you

  David

  Solution found:

  Click on set of rules that you have created.

  Expand rule in there.

  Select the Advanced mode and mode tree, and then click OK.

  Select the root task, click insert pattren and create pattren based on unrelated element (here actually destiny)
  Once you create pattren, will be elements of access under item boundless for the configuration of business rules.

• SqlDev 4.0.2: In Look &amp; Feel 'Metal' of some UI elements are not visible

  "SqlDev 4.0.2: in Look & Feel @Metal" some elements of the user interface are not visible

  Standart-

  

  Metal-

  

  Of course, I could drop the java team a note and see what they say... assuming you're on a supported platform. Or you can go to the Java community directly.

• Thunderbird: In write mode can not find the tool bar (or menu bar), then how should I send my email?

  Thunderbird: In write mode can not find the tool bar (or menu bar), then how should I send my email?

  Well you can press Ctrl + Enter or you could re - turn on the menu and the toolbar https://support.mozilla.org/en-US/kb/display-thunderbird-menus-and-toolbar .

• I have "upgraded" to FF5 and now have no refresh or stop icons in the menu bar, are not available in the menu "personalize." How to make a comeback?

  Question
  I have "upgraded" to FF5 and now have no refresh or stop icons in the menu bar, are not available in the menu "personalize." How to make a comeback?

  I'm happy to have helped.

  It was something that many users asked when he changed first, and I initially did not know myself that the order of the buttons would make a difference as to if a button or a pair of buttons would be displayed.

  If you mark the post as solved while he is recorded in the answer will appear in the results of research and may help others.

• Share photos added to the photo library via the menu are not visible on the Photos

  Hello

  I started using DxO OpticsPro 10 to process Raw files. When I used the share menu in this application to "Add photo" pictures are exported but not visible in the Photos app. I see that they are in the photo library (Show Package Contents > Masters), but they are not visible in the Photos in the Photos app. However if I use "Export to Application" instead of "Add photo" in DxO OpticsPro the Photos app opens and the image is visible.

  You can't always do and changes directly to the photo library - you must use the program of Photos to import photos - adding photos to the library has no positive effect (and may even cause problems)

  LN

• The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

  The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

  A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

• I finally got CS2 installed on my system. But now the menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this?

  I finally got CS2 installed on my system. But now the drop-menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this? I tried to go into change preferences but it does not work

  I changed it to the value default them and that worked. Thank you very much