Mercury Playback Engine GPU acceleration is not available on this system

Similar Questions

• Issue of Mercury Playback Engine GPU Acceleration (CUDA) [Windows 10 Pro]

  Hey guys, I got a little question about rendering in first Pro CC parameters.

  When I create a new project I can choose the type of rendering as Mercury Playback Engine GPU Acceleration (CUDA) , but when I restart my computer and open the project file I see this message:

  "This project has been modified used with Mercury Playback Engine GPU Acceleration (CUDA) which is not available on your system. Mercury Playback Engine Software only will be used. »

  After that I'm more able to change the setting of rendering to Mercury Playback Engine GPU Acceleration (CUDA) GPU acceleration.

  I tried to use the manual method to add my card in the "'cuda_supported_cards.txt ' but no such file exists in the directory."

  Here is the link to the method: https://forums.adobe.com/thread/629557

  Here are my specs:

  CPU: i7 quad core 4810mq

  GPU: Quadro k2100M

  RAM: 16 gb 1600 mhz

  My laptop is a workstation mobile Lenovo w541

  My GPU drivers are up to date and just reinstalled them yesterday.

  I'd appreciate any help,

  Thank you.

  Quick update, when I try to create a new project, that I am not able to choose rendering development and more. He used to work, but now it's just locked in mercury software only playback engine

  Hi phillipb,.

  Please see this: FAQ: why the my GPU is not available for the Mercury Playback Engine GPU acceleration?

  Thank you

  Regalo

• When the latest EVGA video card will be approved for Mercury Playback Engine GPU acceleration?

  I built my system of video editing, Windows 7 Ultimate, EVGA GeForce GTX 570 graphics card and motherboard ASUS Rampage III Extreme i7 920 Mhz, 24 GB of RAM. I decided to update my video card for EVGA 660Ti with many more CUDA processors and 3 GB of memory, but when I made the video I got this message "the project last used with Mercury Playback Engine acceleration GPU, which is not available on this system." Software playback engine Mercury only will be used. "and it seemed that the rendering is slower. Even if the newer video cards EVGA have more memory and processor and power more CUDA cores and best score on Intex experience Windows, Adobe does not approve them and say that they use the GPU Merecury Playback Engine acceleration. Why? Quadro cards are much more expensive have less memory, less CUDA cores but are rated higher by Adobe for creating and rendering, why is - this? What gives? Why EVGA which seem more powerful and cheaper cards rated lower than cards Quadro? This will never change?

  These cards just have not been tested yet, is all.  But if you go in the program of the PP folder and just delete the cuda_supported_cards.txt file, you should be good.

• Impossible to activate the Mercury Playback Engine GPU acceleration

  Cannot activate the Mercury Playback Engine GPU acceleration.

  Just bought an Asus GeForce GTX 560 it just so that I can use the graphics acceleration on Adobe first Pro CS5.

  Followed every step of most of the tutorials like this great http://Vimeo.com/13440307 and still the Mercury Playback Engine GPU acceleration option is always dimmed. 

  

  http://www.urbanistgame.com/wp-content/uploads/2012/06/CUDA-supported.gif Add the last two lines that wasn't sure if it took "Ti", he came "supported" in cmd after the 'Ti', so I guess that's what she held.

  You can see in bold that I put the option Multi-display/mixed-accelerating GPU 'compatibility performance Mode '.

  Splash screen confirms Version 5.0.3 (update to enable the Mercury Playback Engine GPU acceleration).

  After all that 'Make and video playback' option is always used in output.

  Any ideas? Information System

  

  List installed programs from Nvidia

  I hope someone can help.

  PROBLEM SOLVED.

  I have reinstalled CS5 on the bookdisk and it worked fine. Past 9 hours trying everything else sound was really the only thing left and the last thing I wanted to do.

  Results:

  Rendering of a clip 32 min with Gaussian blur effect

  Before CUDA, it took 4 hours and thus my move to buy a card CUDA.

  After 23mins CUDA! using the encoder

  Question:

  I noticed that the GPU is not pointing out that a lot still. Operating only at 30% of the activity?

• Missing Mercury Playback Engine GPU acceleration after computer crash. How can I get it back

  Hi, I am missing the Mercury Playback Engine GPU acceleration after computer crash. How can I get it back?  I got my husband to update my graphics driver.  How what should I do?  When I check the project settings > general, he still has the field of software reading Mercuy only in gray.

  Adobe Premiere CC CC 2014 CS6 CS5.5 CS5 video cards with CUDA Mercury Playback unlock MPE Hack David Knarr

• The Mercury Playback Engine GPU acceleration and activate mercury pass question

  So, I'm working on Windows 7 Professional 64 bit SP1 (my father built my desktop and here all the info I get off Speccy on its parts)

  -CPU: AMD Phenom II X 4 965

  Deneb 45nm technology

  -RAM: 8.00 twin DDR3 @ 669 MHz

  -Motherboard: ASUSTeK Computer Inc. CG1330 (AM3)

  -Graphics: VX2770 series j (1920x1080@60Hz)

  ATI Radeon HD 5700 Series (ASUSTeK Computer Inc.)

  -Hard drives: 932GB Seagate ST31000528AS peripheral ATA (SATA)

  -Optical discs: BD - RE of HL - DT - ST WH14Ns40

  
  

  Now, recently I'm subscribed to Adobe first CC 2015 and I open a project file that was originally a Mac computer (the disc has been formatted to be read by the PC and I got this done before so thing Mac PC should not be a problem)

  The first message, I thought "this project has been modified used with playback engine Mercury GPU acceleration (OPEN CL), which is not available or not certified on this system. Only Mercury playback engine software is used.

  I didn't know what to do with that I just said ok, just the project upward and running and everything is fine except the audio continues by cutting. He will play for about a minute on it before the audio starts to cut.

  I played a bit with my preferences and settings and preferences in reading, there is a setting that says "Enable mercury transmit." Thereby the option checked I get the audio cutting out (there are a few options with the audio device being Adobe DV or Adobe Desktop Audio sub and an option for the video device said Adobe DV and I can check or leave it disabled but results remain substantially the same.) Now I have it on Adobe audio, DV with Adobe DV checked and it goes a little long before audio cutting comes in)

  Now, if I uncheck Mercury Select pass he plays wise audio fine but after about a minute, playback stops. Literally paused, it is it's not freezing acts as I pressed pause when I touch my mouse or keyboard.

  I tried to do a new project and import all of the images in it to see if it would help, but the problem persists. My pictures comes from multiple sources, including a Sony DSLR and Iphones.

  Please tell me this is a fixable bug and Adobe CC is not incompatible with the office somehow.

  CineForm is a codec made specifically to be a "Digital Intermediate" or post-processing format. The company that created it was bought by the people of the GoPro and is used in some of their cameras. It is designed for the achievement of quality thanks to a multi-generation processing pipeline post, without loss of quality when a step is rendered on export to another station in the process.

  There were two objectives: one, it kept ALL quality through export operations repeated at a high-end professional examination and two that it was like 'light' on the processor of a computer while encoding off to play as possible. So it is not nearly as packed as many other codecs (like most H.264 & tel) and puts MUCH less strain on the CPU. It's usually large files, well that say not nearly as big as as DPX frames-based form. Does a little more direct work on the disc reading process to have been a bit bigger... but... This is a place you should have excess capacity in your system. We rarely have spare CPU capacity.

  To get it, you go to the website of the GoPro and download their free GoPro Studio, I think it is called and install. Who installs Cineform on your computer, and then you can transcode via the endoder that comes with PrPro, Adobe Media Encoder, which allows batch and same file transcoding and control things like a time for a process. Or you can do it via using Adobe prelude to ingest, rename and say: place the renamed files 'original' in a single folder permanent conservation while making another series of the same name but transcoded to X codec and laid in this case here to work with.

  Of course, you can use the (Mac) ProRes and DNxHD/R (PC) to work with, and in their larger versions, less compressed, they work just as well.

  All three codecs can be used for import in each program level pro, I know. PC cannot export ProRes that Apple will not allow the codec out of 'their' sandbox sand and DNxHD/R has been designed to work in Windows (although as ProRes, can be read / most of the Mac edition). CineForm works anyway.

  And as always in the work of pro, we deliver an export of output in that to the customer at the end of the job. If the original codec of the camera and the codec to work when editing... does not matter. Other than to be a step in the process.

  Neil

• Recommendations for a new graphics card for Prem Pro 2014 (Windows) which offers the Mercury Playback Engine GPU acceleration?

  Hello.

  I am inclined to believe that I could take advantage of GPU acceleration when editing as my PC is a little under spec. I have a card but when I switch to the GPU acceleration, it works but whenever I stop moving / play / rub on the timeline the preview screen becomes black.

  I don't know who might be the best card to get for my reqs. I don't think I put great demands on the software, but it still hurt. Most of my editing is the lengthy interviews 3-10 min. 2 camera multi-camera editing. I still need to change the curves of RGB, corrector of three way color, transitions and sometimes careful noise reduction. One of these leaves of evil from my PC. All the usual titles, music & voice etc. but nothing too heavy like movies or the insertion of a lot of video lines.

  I'm also a little casual work in After effects too.

  PC spec is:

  Intel Xeon CPU 1.86GHz (2 processors)

  12 GB of RAM, which I'll update to 16 GB

  64-bit op system

  Windows 7

  Radeon HD 5450 graphics card.

  Any guidance would be most appreciated

  Sousproductions wrote:

  Thanks for the link. Had a look. Needs a long look later as some useful knowledge contained in there. It refers to the CS6 so maybe info is not accurate enough, now for 2014, but good for me to learn more about graphics cards compared to the edition.

  1. CS6 was the basis for a large part of the PPBM7.com site, it has been updated with lots of new data.  The single point of reference on this site in the three versions of the same identical scenario download and is perfectly usable for CS6, CC (7 first) and CC2014 (first 8).  Run and sign up to see the results.
  2. If my assumption on your exact model of the CPU is just a new processor i7 with 4 cores is better than your two Xeons 4 strands because they have no hyperthreading.
  3. You cannot compensate for low performance CPU with a new GPU.

• Mercury Playback Engine GPU is not available

  I have read through the forum messages and have not found a solution, so I apologize if there is only a solution posted elsewhere.

  I have an iMac 27 "(fin 2012) with NVIDIA GeForce GTX 680MX running Mac OS graphics card 10.8.5."

  I use Adobe first Pro CS6.0.3, and when I upgraded my OS to 10.9 Maverick, I started to experience several problems, including:

  1. The dreaded spinning beachball and "first meets not.»
  2. "This project has been modified used with Mercury Playback Engine GPU Acceleration (CUDA) which is not available on your system. Mercury Playback Engine Software only will be used.
  3. Video files - I think they were all. MOV - became "crushed" to the top of the program screen (film picked up only about 1/3 of the window the program monitor).

  After a long conversation with the Support from Adobe, it stated that the update to 10.9 Maverick was the problem, then i:

  1. Updated for first 6.0.5 but who has not fixed any issues.
  2. Logged in as 'Root', who worked for a while but I got 3 'first encountered problem and must close.'
  3. Remove preferences, repaired permissions, database troubleshooting practices, etc., but problems persist.
     

  No help.

  Finally I restored my computer from a Time Machine backup to a day before the OS 10.9 update and this seemed to resolve all issues. So I was for Mac 10.8.5 and first 6.0.3.

  But the. MOV-compressed-in-the-program-monitor problem began to surface again (see photo below).

  

  So I updated for first to 6.0.5 (but not my OS - it is still 10.8.5), and the "Mercury playback engine" error is returned.

  

  And the. MOV files are always compressed in the program monitor. I have a project that I finished in 6.0.3 but is now messed up in 6.0.5.

  Help please. Is the only solution without downgrading to first 6.0.3 and if so, should I do a clean install of the program of the DVD?

  Thank you

  RW Harris, Director of training

  Express oil change & tire engineers

  Birmingham, AL

  NVidia Windows Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a file 'supported cards' - and Mac http://www.vidmuze.com/how-to-enable-gpu-cuda-in-adobe-cs6-for-mac/

• Software used to decode the media not available on this system

  I read a lot on this subject on various sites of forms and failed to find a solution.

  My project is filmed in 1080i @22Mbps and is 2 hours long that I split on two discs... There is NO images or graphics aside a grab single image to roll over the titles, there is some .mp3 and one. WMA file for audio.

  My method of editing, I edited the entire project in a single calendar, so when I get overall even length I it spread over approximately a two-disc length... Disc 2 was made as H.264 blu - ray and any in yet for blu - ray authoring this worked flawlessly, however with disc one I get the error "the software used to decode the media not available on this system...". blah blah blah! »

  I'm working on windows 10 PC with enough RAM and processing power and graphics.

  Can anyone provide a reason or a solution please.

  I rechecked the timeline and there are no gaps or breaks in there, I made the file as H.264 and imported the .mp4 still work but flow is low.

  Thank you

  P.

  Ok.. then MPEG2-Blu-ray has imported and burned to disc correctly... I'll let discs go to the client in this format and hope that its ok for them

• Adobe still the software that is used to decode the media is not available on this system. install the correct decoders for the file you are editing can help fix the problem

  Hello

  I got this message after the import on ten H.264 files that I coded for Adobe media encoder.  "It is not available on this system from adobe yet the software that is used to decode the media. install the correct decoders for the file you are editing can help fix the problem. »

  The files that we have shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with always the same error.

  I also tried a new project and after about ten or so files imported into a timeline, the breakdown of the system.  I tried twice...

  Thanks in advance

  Please report to us. I don't know the exact specifications. for stills in still, the limit is 4000 pixels in the largest dimension for PrPro.

  Now, I must add that in PS. resizing algorithms are better, in my opinion, than those of PrPro and again. This means that there is nothing to gain and quality of untying, important images much larger than the size of the frame of the project, i.e. of 720 x 480 for NTSC SD projects yet. The size of the image will be the limiting factor, so scratch that.

  Even in projects PrPro, I resize to exactly what I need. If I will not pan on a zoomed image, I resize it to the size of the image of the project. If I move on a zoomed image, I resize just what I need.

  Good luck

  Hunt

• GPU acceleration is not available

  Memory of 32 GB for the kernel MAC Pro 12

  S X 10.6.7

  NVidia Quadro 4000 MAC graphics card

  Premiere Pro CS5.5

  Mercury playback option is grayed out in project > project settings

  

  I installed the video card recently, after the upgrade to CS 5.5

  The GPU acceleration is revealed in sequels.

  How can I switch software acceleration in first pro?

  Thank you

  It's just a slightly informed - I think that you must download and install the CUDA drivers separated as well.

  http://www.nvidia.com/object/Mac-driver-archive.html

  It work?

• CUDA Mercury playback engine in Premiere Pro CS6 but not show in first Pro CC. Why is this?

  G ' Day of the Australia again.

  I've been using Premiere Pro CS6, and during this time the Mercury Playback Engine GPU acceleration of the reduction (CUDA) appears as an option for the rendering engine.

  But now that I've updated for first Pro CC, the rendering engine does not appear, only the Mercury Playback Engine software.

  My computer is

  Windows 7 Professional

  Service Pack 1

  Processor Intel R COre TMi7

  24 GB RAM

  64-bit operating system

  Graphics card

  NVIDIA GeForce GTX 570

  Could someone help me please get the CUDA converter to appear with first Pro CC.

  Thanks a lot for your help.

  The following text appears when I run the Premiere Pro Cs6

  

  Adobe switched to a DLL that universally supports all GPU 'qualified '.  You upgrade the drivers for that?

• Mercury Playback Engine (CUDA) GPU acceleration

  Last updated Adobe Premiere Pro CC 2015.1 Mercury Playback Engine GPU (CUDA) Acceleration of work. How can I start? I have a video NVIDIA Quadro 4000 card. Windows 7. Thank you for your quick response

  Hello

  Made video and playback was not active, but that's ok. I reinstall the graphics drivers and it is already active. But thank you.

• Mercury Playback Engine option in first Pro CS6 GPU acceleration not on the new Mac Pro Tower 6 - Core Intel Xeon E5 AMD over-pants D700?

  Mercury Playback Engine option in first Pro CS6 GPU acceleration not on the new Mac Pro Tower 6 - Core Intel Xeon E5 AMD over-pants D700?

  How can I get the Prime Minister to allow me to use the GPU of Mercury Playback Engine acceleration option?

  WilsonMark wrote:

  This applies to the new Mac Pro w / D700 cards?  If so, can you please explain how to change the settings.

  I have CS6 installed longer, so I don't remember the exact tree that he uses.  There are 2 text files, that you need to remove.  We're in the Premiere Pro installation directory, and the other is in the Adobe Media Encoder, a.  You locate the file called opencl_supported.txt.  You can find this file in the installation directories.  Delete both.  PR of restart and you should be able to choose OpenCL as the hardware renderer.

• With the help of NVIDIA GTX970, it will allow acceleration GPU rendering and playback instead of Mercury playback engine software only option?

  I want to buy GTX 970 NVIDIA,

  With the help of NVIDIA GTX970, it will allow acceleration GPU rendering and playback instead of Mercury playback engine software only option?

  Yes.