Message = "Object reference not set to an instance of an object."

Similar Questions

• Object reference not set to an instance of an object on Win 7 IE8

  I get the error message "Object Reference not set to an instance of an object" when looking at VCM / SCM 5.2.1 glancing all summary views as OS / "Machines" or whatever it is in compliance. Usually I see it on a poor observance of run that contains no data.  The full grid view works OK.  The equalizer of graph search progress bar flashes then the view is cleared and just object reference bad.  Reports SSRS based including those with graphics seems OK as a summary of the data on disk but the same in the interface user Web, disk space / readers get the error message.

  This happens on IE8 and Win7.  I used IE8 on XP and it worked OK.

  Have you checked to make sure that your Pop Up Blocker is turned off?

  How do you access the VCM Console?  By its IP address?  Host name?  FULL DOMAIN NAME?

  I have just rant in a problem where PUB was causing havoc on some, not all, summaries node.  I would check there first.

  SRS is capricious, when it comes to access the VCM Console, if you want to ensure your are accessing your Bowser with the same naming convention that you used during the installation of VCM.

  Post back with an update if you don't mind.

• Error "Object reference not set to an instance of an object" when you try to use a disk with vSphere Client

  Hi all

  I searched exhaustively positions but found no answear that.

  I'm trying to access a virtual disk that is free (no machine not in use now).

  For this purpose, I am went to a virtual computer, then clicked on edit settings - & gt; Add hard drive - & gt; use a disc

  Then, when I am prompted for the disk, I select it and click ok.

  When I click on 'Next', you will receive the following message:

  Object reference not set to an instance of an object

  (it seems really in Spanish: Referencia an object no set como UN instance object)

  And then the next button appears as non-cliquable.

  Any suggestions?

  It could be related to the .NET Framework, so I write here the versions I have currently installed:

  .NET framework 2.0 SP1 LanguagePack

  .NET framework 2.0 SP2

  .NET framework 3.0 SP1 language pack

  .NET framework 3.0 SP2

  .NET framework 3.5 SP1

  All this with the patches.

  Thank you in advance for your help!

  Juan J.

  PS: I found there was information about the lost pilots and VSphere Client. I already changed those:

  %RootDrive%\%ProgramFiles%\VMware\Infrastructure\Virtual infrastructure Client\Launcher

  Where I copied libeay32.dll and ssleay32.dll

  I would then watch the logs on the ESXi console.

  Re-create the error, and then search for log entries that appear at the same time.  That should shed more light on what could be causing it.

  Good luck!

• Object reference not set to an instance of an object

  After the opening of the "Microsoft SQL Server Management Studio" for SQL 2012 and tries to connect to the server, I get this: reference object not set to an instance of an object. (Microsoft.VisualStudio.Platform.WindowManagement)

  

  

  Can someone HELP me please? I'm VERY NEW to this...

  Thank you for your time!

  Install a service pack sql or sql to reinstall or repair. Something must have erased part of the installation, it has not installed right or he needs a SP for SQL.

  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/b04f3626-87f8-475D-8277-276efb6b4cac/object-reference-not-set-to-an-instance-of-an-object?Forum=sqltools

  It is a forum for windows users. I post a question on this forum, it will be more useful, because they treat of this

  Good luck

• Several return orders exception 'object reference not set to an instance of an object.

  Don't know what I'm doing wrong here.  I'm reuse a code that worked fine on another system, but basic stuff does not work on this system.  Although some things work.

  For example, I can run new-virtualportgroup.

  PS C:\ > new-virtualportgroup - vSwitch10 - VLanId 2502 virtualswitch - name vSwitch10VLAN2502

  Name key VLanId PortBinding NumPorts

  ----                      ---                            ------ ----------- --------

  key vSwitch10VLAN2502 - vim.host.PortGroup - vSwi... 2502

  And I can see the new portgroup created in VSphere.  But if I then try to get-virtualportgroup...

  Get-virtualportgroup-name vSwitch10VLAN2502

  ERROR: Get-VirtualPortGroup: 09/01/2015-17:44:03 Get-the VirtualPortGroup object reference not set to an instance of a

  ERROR: object.

  ERROR: line: 1 char: 21

  ERROR: + get-virtualportgroup < < < <-name vSwitch10VLAN2502

  ERROR: + CategoryInfo: NotSpecified: (:)) [Get-VirtualPortGroup], VimException)

  ERROR: + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.GetVirtua

  ERROR: lPortGroup

  ERROR:

  ERROR: Get-VirtualPortGroup: 09/01/2015-17:44:03 Get - VirtualPortGroup VirtualPortGroup with the name ' vSwitch10VLAN2502

  ERROR: "was not using the specified filters.

  ERROR: line: 1 char: 21

  ERROR: + get-virtualportgroup < < < <-name vSwitch10VLAN2502

  ERROR: + CategoryInfo: ObjectNotFound: (:)) [Get-VirtualPortGroup], VimException)

  ERROR: + FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimAutomation.ViCore.Cmdlets.Commands.Host.G

  ERROR: etVirtualPortGroup

  Several other cmdlets are behave the same way.  I got lost.

  VMware ESXi, 5.5.0, 1331820

  VSphere version 5.5.0 build 1369380

  PowerCLI v5.5.0.5846

  VIX v1.12.1.3346 (installed with PowerCLI 5.5 bundle)

  May be the issue.

  Try to assign an account domain (provided that you use a domain account), at the root of the vCenter Administrator role.

  Just to check if it works like that.

• Together-NetworkAdapter - object reference not set to an instance of an object.

  Guy.

  I moved a bunch of virtual machines to a group that had a vSwitch Standard to a cluster that has a distributed vSwitch. Now I'm banging my head against the wall with this one. I thought that the code below would work but I get a message

  All-NIC

  Object reference is not set to an instance of an object.

  What I'm doing wrong here?

  --------------

  SE connect-VIServer SERVER1

  $OldNetwork = 'EU VDI ILIO network storage'

  $NewNetwork = 'EU UCS VDI Port Group (VDI Desktops - VLAN148).

  Get - VM | Get-NetworkAdapter | Where {$_.NetworkName - eq $OldNetwork} | Together-NetworkAdapter - NetworkName $NewNetwork - confirm: $false

  Strange... it works for me, but I used double quotes and I have no spaces in the names of dVportgroup:

  $myNetworkAdapters = Get-VM wintest1 | Get-NetworkAdapter -Name "Network adapter 1"
  myVDPortGroup = Get-VDPortgroup -Name "v4094--BLACK_HOLE"
  Set-NetworkAdapter -NetworkAdapter $myNetworkAdapters -Portgroup $myVDPortGroup
  

  Try with oneliner (sorta, that you always need myVDportGroup variable):

  $myVDPortGroup = Get-VDPortgroup -Name "EU VDI Workstations PortGroup"
  Get-VM Test| Get-NetworkAdapter -Name "Network adapter 1" |Set-NetworkAdapter -Portgroup $myVDPortGroup
  

  If repeated failure, please provide an output of command "get-member" against your variables (gm is an alias):

  $myNetworkAdapters|gm
  $myVDPortGroup|gm
  

• Object reference not set to an instance of an object in c#

  I'm getting "reference object not set to an instance of an object in c# when I try to access the data using the cobol program.

  We did already shape 5 windows and have applied the same code on this form, but only this form get the error.

  so my question is that is it possible that this problem occurs the cobol program.

  Thank you

  I'm getting "reference object not set to an instance of an object in c# when I try to access the data using the cobol program.

  We did already shape 5 windows and have applied the same code on this form, but only this form get the error.

  so my question is that is it possible that this problem occurs the cobol program.

  Thank you

  Your question is probably better asked in this forum: http://social.technet.microsoft.com/Forums/en-US/home

• "Object reference not set to an instance of an object." on track

  Dear members,

  Today, I tried to "build and Run...". ' a rule base that I created some time ago and executed correctly. Now, I get the error "Object Reference." not set to an instance of an object When I try to run the basis of rules using Oracle Web determinations (construction is always successful). When I run the basis of rules by using "build and debug...". "no errors are presented and the basis of the rule is executed successfully as well. I can also access the basic rule in my web browser without having any problems. I expect that the cause of the problems lies in the recent installation of Google Chrome or Mozilla Firefox, but I don't know where to look for a solution. I already tried to install the latest version of the Oracle Policy Modeling, but the error has not been resolved by then.

  Dear Frank,

  Thanks for putting me in this direction. I never looked in the browser by default settings, because they never changed. In other words, Microsoft Internet Explorer is and has always been my default browser. Do even Mozilla FireFox or Google Chrome my default browser solved the problem (partially). Since we are analysts we of course want to know how the problem occurred. In addition, because the problem is not completely solved yet, it seems to be some sort of bug left in the Oracle strategy modeling.

  • I used the modeling of the Oracle strategy for six months without having any problems. The basis of rules was always run correctly in Microsoft Internet Explorer (which has been configured as the default browser).
  • I installed Google Chrome and Mozilla FireFox at the same time, but has not changed my default browser settings (so Microsoft Internet Explorer is the default browser).
  • Run a basic rule of now caused the "object reference is not set to an instance of an object." even if the default browser has been set successfully.
  • I changed the default browser to Google Chrome or Mozilla FireFox (which of the two is not serious) and rules was performed correctly in the specific browser.
  • I changed the default browser to Microsoft Internet Explorer, but the Oracle strategy modeling keeps using my default browser defined previously (Google Chrome or Mozilla FireFox).

  From there, I guess we can conclude that the Oracle Policy modeling does not resemble the right registry key to determine the default browser. In other words, Oracle Policy modeling is unable to identify Microsoft Internet Explorer as the default browser, where other applications (like Google Chrome and Mozilla FireFox) do this properly. I expect that the HKEY_CURRENT_USER\Software\Classes\http key is sought (which did not exist after I installed Google Chrome and Mozilla FireFox), but for the Windows operating system this key is only used until Windows XP. Windows Vista from the HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\Associations\UrlAssociations\http\UserChoice key should be used to find the default browser settings.

• object reference not set

  I have a .net web service.

  I checked via the web service that it works correctly.

  Here is the SOAP 1.2

  POST /WebServices/MarketingWebServices.asmx HTTP/1.1
  Host: sdasapprdsvr
  Content-Type: application/soap+xml; charset=utf-8
  Content-Length: length
  
  
  http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope">
    
      
        string
        string
        int
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
        string
      
    
  
  

  I get error "the server could not process the request. --> The object reference not set to an instance of an object"

  My code base to set up the soap request

  m_soap.setAction(hostServer + "/" + serverAction);
  m_soap.setHost(QUrl(hostServer).host());
  QtSoapMessage request;
  request.setMethod(QtSoapQName(serverAction, hostServer));
  
  request.addMethodArgument(new QtSoapSimpleType(QtSoapQName("AssociateEmail"),QString("[email protected]")));
  request.addMethodArgument(new QtSoapSimpleType(QtSoapQName("ShowName"),QString("print2013")));
  ....
  
  m_soap.submitRequest(request, endPointURI);
  

  I tried to addMethodArgument without the Type of SOAP

  That is to say.  request.addMethodArgument ("myParameter", "", "myValue");

  I tried to use a struct as shown in another post.

  QtSoapStruct* inputValues = new QtSoapStruct(QtSoapQName("Items"));
  request.addMethodArgument(inputValues);
  QtSoapStruct* item = new QtSoapStruct(QtSoapQName("Item"));
  item->insert(new QtSoapSimpleType(QtSoapQName("Name"), "_OS"));
  item->insert(new QtSoapSimpleType(QtSoapQName("Value"), "BB10"));
  inputValues->insert(item);
  

  It seems as if the arguments are not be attached to the request.

  I was getting an error that it lacked the required fields for the stored procedure.  So I adjusted the .net web service to set default values if the values sent via the web service were empty.  This moved me to the common mistake.

  So, apparently, it was matter of double.

  The first problem was in the client code:

  First of all, I needed to make sure that the parameters passed were in the correct order.

  Second, I found that the addMethodArgument was the right way

  request.addMethodArgument( new QtSoapSimpleType(QtSoapQName("AssociateEmail"), query.value(0).toString()));
  

  The second problem was with .net code.  I needed to make sure that the passed value is not zero.

  if (AssociateEmail == null || AssociateEmail == String.Empty || AssociateEmail.Trim().Length == 0)
                   { cmd.Parameters.Add(new SqlParameter("@IN_AssociateEmail", "No Associate Email")); }
                   else { cmd.Parameters.Add(new SqlParameter("@IN_AssociateEmail", AssociateEmail)); }
  

  And I had to make sure I have done this for each parameter.  Apparently, I sent a couple of empty values, and this caused the shot to the top.

  However, the return value is not always in the best format, but that's another thread.

• I connect to a database through VS 2010. Suddenly, I get an error message indicating this object reference is not set to an instance of an object

  I use VS2010 professional edition. I used it for my long term project. And the database I use SQL server 2005. When connecting to the database using Server Explorer, I get the object reference is not set to an instance of the error object. I have tried many steps in the microsoft forums. But the bumps still error.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• "Reference to the error object not set to an instance of an object."

  Why after an automatic update of windows 7, I get this error "error object not set to an instance of an object reference"?

  Hi AHurst,

  1. When you receive the error message?

  2. the updates have been installed on the computer?

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  If the problem does not still in safe mode, and then perform the clean boot procedure to verify if a third party installed on the computer program is causing the error message.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get "error number 0 x 80040706 Description: object reference not set" while trying to install Empire Earth 2

  Original title: error number 0 x 80040706 Description: object reference not set

  I can't install Empire Earth 2 on my PC because of this error. It is not the disc and I have no drivers up to date. I've tried every suggestion I could find but nothing works. Help!

  Its OK, I found the problem. I recently downloaded EMET 2.0 so I checked it and replace the recommended settings and it worked. I don't know why he did just made even though I thought EMET should only apply to internet explore?

• performance tab - object refrence not set to an instance of an object

  Hi all

  freshly installed our VC server and all is well except the performance tab in the client interface to infrastructure.

  When you go to this tab on a couple of our guests we get"refrence not set to an instance of an object of the object", we also see the same error when you try to view the performance tab for virtual machines on a host that suppresses the error.

  tried rebooting vpxa and mgmt without change, services am thinking maybe remove the hosts of VC and add can solve but thought I'd see if anyone has a better solution, before you go try this

  ESX is 3.5 u3

  VC is 2.5.0 147633

  any suggestions appreciated

  Thank you

  Randy

  Yes, the journal of vc is found in: c:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\Logs\vpxd.log

  -KjB

  VMware vExpert

• Trouble with the reference not set error

  I know there are a lot of posts related to this error, but nothing seems to be useful in my case, so please forgive me for that I have write question after almost 2 days of google search

  I'm working on a game for blackberry playbook, and for sound/audio I use openal with OggVorbis, I downloaded blackberry OggVorbis next source port

  https://github.com/BlackBerry/OggVorbis

  but problem as its integration with game it says undefined reference to ov_clear which is located in vorbisfile.h and vorbisfile.c is compiled and I see ov_clear in libvorbis.a qnx momentics IDE and I added libvorbis in my game but still I get these errors

  Help, please

  Hello

  We have compiled ogg/vorbis standard distribution without any problem. From the looks of your error, looks like you can not be linking libogg. Ensure that you link the libvorbis and libogg. If you are already linking both a also ensure that the binding order is correct. You must link vorbis Ogg before to satisfy the arm's length.

  Best,

  Stéphane

• Extending from QObject results in reference not set error vtable

  I have an existing type bean class with QString members bool and a QStringList.

  I want to access its properties of QML I want to use QObject.

  The class compiles very well without the extension of QObject, but when I add it I get "undefined reference to 'vtable for X.

  If this class is compiled:

  /*
   * X.hpp
   *
   *  Created on: 08.11.2012
   *      Author: sha
   */
  
  #ifndef X_HPP_
  #define X_HPP_
  
  #include 
  #include 
  
  class X {
  private:
      QString name;
  public:
      X();
      QString getName() const;
      void setName(QString name);
  };
  
  #endif /* X_HPP_ */
  

  And it does not work:

  /*
   * X.hpp
   *
   *  Created on: 08.11.2012
   *      Author: sha
   */
  
  #ifndef X_HPP_
  #define X_HPP_
  
  #include 
  #include 
  
  class X: public QObject {
  Q_OBJECT
  
  private:
      QString name;
  public:
      X();
      QString getName() const;
      void setName(QString name);
  };
  
  #endif /* X_HPP_ */
  

  No idea why?

  I build for BB10 using NDK 10.0.9.386 and I found moc.exe in C:\bbndk\host_10_0_9_52\win32\x86\usr\bin

  I executed as described in the linked thread, it created a moc_x.cpp and it compiles now.

  However, it seems that for this problem he had incorrect header members in the pro file.
  For some reason any this has not changed Momentics in any way, until I added QObject in one of the files.