Re: roll-back of firmware 32L2333DG

Similar Questions

• Roll back the firmware update

  Hello

  Is it possible to roll back the update of the firmware? I put on the Hebrew firmware 01.01.15 - I was wondering if I can take that off and put that ordinary English? Is it possible or do I just wait for the next firmware update and use English? I was told to look at the other posts here so that he can recognize the Hebrew he needs to UTF-16 encoding - but my s/w EasyTag for Linux can only do utf16 for id3v2 and the "rocket" uses only id3v1 correct?

  I am so frustrated with this.

  For a manual installation of firmware, simply unzip the compressed firmware file and place it in the root directory of the "rocket".

  When the rocket starts, it performs a check for a new firmware file in the root directory.  If you have placed the file in the root, it will automatically replace its current firmware with the one you have placed there.

  This can be done in MSC or MTP mode.  The only difference with MTP mode is that you first need to double-click on "Internal memory" to access the root durectory.

  Bob

• Linksys E4200 - can update firmware and roll backs damage my router?

  Hello

  I had to restore the firmware on my Linksys E4200 (v2) because I had problems after upgrading the firmware. I tried to upgrade again and again met with problems. In short, I improved a few times and restored several times. Currently I'm on the old firmware and I without any problem.

  In the old days, it was not wise to update the firmware of some peripheral hardware too often, because some devices has agreed that a limited number of updates to firmware... don't ask me why :-)

  Is this also the case with the Linksys E4200 or can I upgrade and roll back as often as the requires, or as often as I want to try to upgrade because of new features...?

  Thank you

  SJW

  As long as you do the right steps during the upgrade/downgrade the router (loading the firmware using a wired computer, not to interrupt the upgrade/downgrade process, load the right file, etc.), the unit should be fine.

• How to roll back versions of Firefox - Firefox is updraded without my consent and now selenium does not work

  Since Firefox has been automatically upgraded to version 24, selenium IDE no longer works.

  It's very frustrating because I had not requested an upgrade (this has caused me problems in the past)

  so, while I wait for a solution to the question of selenium, how can I roll back to an earlier version of Firefox (that works with Selenium IDE)

  Here are 23 https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/23.0.1/win32/en-US/Firefox%20Setup%2023.0.1.exe [en]

  You must disable the auto update of Firefox, otherwise it will update this self again.

• Mega problems with 6.0 upgrade, possible to roll back?

  No problems before the update. Many sites act as they load, but is then filtered white saying transfer... because a lot can click on stop and reload and they will be, but not all. Many sites will load but without loading flash - there was a cap nine available flash installed but no change. Many sites will load without sidebars to load - controlled and they are part of the page and not the frames or iframes. EU to restore the Favorites and passwords because less than half of them made in the update.

  There are a number of similar issues with the FTP site link, but also discussions some potential problems to roll back. See, for example, https://support.mozilla.com/en-US/questions/865094

• How to roll back an ios9 update?

  I have been asked to update recently. I clicked the button in disagreement and does not have the update. The next day the message popped up again to day. By chance, the Insall option has been selected. There was no contractual agreement for a long time this time. He has just updated automatically.

  It is very difficult to roll back to iOS9.Because apple have already increase the security of the iPhone.

• Satellite L750 - Windows 10 - can I roll back to Windows 7?

  I upgraded to 10 Windows in Windows 7, but I lost the wireless driver and cannot download it from anywhere (unless you know better). Also, I lost Internet Explorer. When I tried to download the system I have an updated copy even though God knows where he is.

  My question is - can I roll back to Windows 7, which I was pretty happy?

  As much as I know L750 is not supported for Win10 so I think that the best option for you is to go back to Win7.
  After several problems with Win10, I did the same thing and I am happy now using original Win7.

• Media Player - after installing Windows Media Player 11, which is not properly installed, can I roll back to WM9?

  After you install Windows Media Player 11, which does not properly get installed, can I roll back to WM9?

  Hello

  -You get an error message?

  I suggest you follow the steps in this article to uninstall Windows Media Player 11.
  http://support.Microsoft.com/kb/934372/en-us

• How can I identify the date when the last system restore was used to roll back the pc?

  Original title: how System Restore last used

  As the title suggests, how can I identify the date when the last system restore was used to roll back the pc?

  I can remove all restore points. I've used twice now the beta off Defender & he assures me
  the pc is clean Virgin.

  I have just got rid of a Trojan dropper & a Win 32/AmmyyAdmin. -(whatever it was!)

  I now seem to have acquired Windows Powershell along the way, gawd knows where!

  He was not here a few days ago and I don't have any idea where it is!

  What is it and should I be worried?

  Thank you

  Hello

  You can check this link:

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• Live Vodafone modem guard roll back installation before installation is complete

  Im trying to install vodafone live but just before the end, he is interrupted and starts rolling back.
  I home addition service pack 3 Windows xp - I have not an ongoing enforcement program antivirus - disable my firewall doesn't help - in the event logs I get the error Manager that follows service controll 7035/7036/7009 - also evntagnt 1003/1015

  Hello

  Just spent 4 hours trying to install Vodafone Mobile Broadband Lite software 10.0.302.24346 version using a modem K3571-Z and kept getting the same problem as you with the software of restoration according to software trys to start the services.

  Found that this problem was due to windows being disabled "Wireless Zero Configuration" service.  Found this automatic setting and then by installing the software corrected the problem.

• Roll back the action errors

  I have had problems recently install a new software. I'd say about 60-75% of the programs I try to install to do the last step, usually save, then falls down, poster sometimes "roll back the action" and then erases everything what he changed and closes. Happens for different programs and I read it might be an older version or problems left by a previous installation failed, but it is none of these. Some are (more) new programs. I also read it could be a file of the registry that was somehow marked as 'read only' but I'm not sure that one or it's location. If anyone knows what's going on, please let me know.

  Thank you.

  Hi bevisjl,
   
  I you recommend to place the computer in a clean boot state and then try to install programs and check will they install, please provide us with error messages that you get when you install the programs with the specific name of the program you want to install:
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
   
  c. under the general tab, click Selective startup, and then clear the check box load startup items.
  (The check box use the file Boot is not available.)
   
  d. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.

  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK and then click on restart.
   
  Once the computer restarts, verify if you are able to install programs.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.
   
  If you are able to install programs after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• I cannot roll back the driver for Realtek PCIe Ethernet driver on Windows Vista.

  Original title: Roll Back Option is disabled under the device driver properties

  I uninstalled the Realtek PCIe Ethernet driver by mistake & then installed the other driver I found site Web of Realtek. but now if I want back with the previous version of the driver, this option is not active. so is there another way to push back with the driver already installed?

  the link skydrive screenshot for your reference is https://skydrive.live.com/#cid=D98B7D8BBADFB4CF&id=D98B7D8BBADFB4CF%21105
  Please advise with the solution.
  Rgds,

  Hello Asif,

  Thanks for keeping us posted and share this information with us.

  Method 1-

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Make sure that recover you the computer to a Normal startup after you perform all the troubleshooting steps, because the computer can be a risk of infection by the virus.

  Now, try a system restore.

  Back to us for any issues related to Windows in the future. We will be happy to help you.

  Thank you.

• How do I roll back directx 11 to directx 9 .0c for a program

  original title: directx

  How do I roll back directx 11 to directx 9 .0c for a program

  Install DirectX 9 http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=35 .0c

• Need help to roll back that Lync Server 2013 changes

  Hi people,

  I need assistance with my environment, it is mainly the Lync 2010, but we were in the process at the beginning of the migration to Lync 2013 when we saw that Skype for business 2015 became available. In order to upgrade to * 2015 I can't have 2010 and 2013 coexist, and the easiest way is for me to roll back changes that introduced Lync 2013 environment.

  Lync 2013 environment consists of a Standard edition server server the FE with a pool of mediation and an Office Web Apps Server. The CMS is always the Lync 2010 FE server. Any help is appreciated!

  This issue is beyond the scope of this site which is for the consumer to related issues.
  To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Impossible to do a clean install on a Partitioned drive C - the screen of the Machine is a "black screen" after Microsoft NVidia driver updated optional; Cannot roll back.

  Some time before, Microsoft had an optional update for the NVidia graphics driver on a 32-bit F3V ASUS laptop.

  Prior to that, everything worked perfectly. The only problem was with this 'bad' optional driver update that was installed once before; and got the black screen, but managed to make it back this time.

  The machine has two partitions; both have a defined password.

  I lost the password to one of them and have no backup.

  Until the black screen, antivirus updates have been updated.

  The equipment works properly.

  Other than a slight overheating issue while games graphics w/3D acceleration (83 degrees Celsius), the machine works pretty much perfectly.

  The machine display perfectly in safe mode.

  Done the following:

  (1) roll back; has failed because the regular (important) Windows Update has not created a restore point * and * previous restore points had been erased.

  (2) the Startup Repair (without and then with the Windows 7 installation disc). Message says "unable to repair.

  (3) w/installer disk, went to the command line as an administrator, tried to format c: received message "there is not enough space on this partition. Please allocate more space, and then try again. "

  (4) boot safe mode with network, downloaded and successfully installed the updates of the NVidia - graphics driver and still have the black screen to normal startup.

  Went 5) for computer management and cleanmgr without success.

  I'm almost ready to consider a shop.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  Try the following

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Press SHIFT + F10 from your keyboard

  type the following commands

  DISKPART

  Press enter

  the list volume

  Next, you select the volume where you want to install Windows 7

  Type: select disk #.

  # represents the number of the volume

  Type: clean

  convert mbr

  create the primary partition

  assets

  format fs = ntfs quick

  output

  output