Message on each normal closed

Similar Questions

• If I click once on an e-mail in the message window while I closed the preview window, I opened that makes e-mail?

  If I click once on an e-mail in the message window while I closed the preview window, I opened that makes e-mail? I worry because I don't want to open a message that my bad-ware download on my computer. If the preview window is closed, I noticed that the number of e-mails read does not change when I click once on e-mail. Can I assume that unread means that it has not been opened.

  Read the answer! Your question is answered there.

  Read / unread is purely an indicator. It has no real meaning. If you go into the menu (alt + T) tools > options > advanced > reading and display, you can change when a mail is marked as read in immediately to 10 seconds (this is what outlook express used) up to 1000 seconds.

  The software marked the email read is that this logic can go. It's always "BOLD", the software did not mark the message read.

  You open the mail? It is an unquantifiable statement.

  In the context of Thunderbird an individual mail is not a discrete element that is stored. It is a part of your data for mail/News. So try to equate open to action just does not fit.

  Thunderbird received mail as a series of lines. He collected in an email that he stores in a file with all your other emails for this folder. You open the file in that the mail is stored? Totally irrelevant Thunderbird opens to get mail every time that mail is added to the folder or to view a mail in this folder.

  Each time a letter is displayed (any mail) the file all your emails for this folder are saved in the opening and reading.

  If clicking on the mail list 'open' the file. Probably not, it was probably already open. The file is opened, read, written to and updated probably half a dozen times since Thunderbird started so if you click on the mail to see won't change anything good at all. If the e-mail file has been closed it will be open to view the contents of the mail, but he is perhaps already open.

  The key is that you try to apply assumptions to mail that simply do not apply. That's why I sound as if I'm going in circles.

  You also may ask, when I fill the kerosene tank my electric light.

  • The software mark mail as read when you say
  • It opens files underlying storage constantly. Clicking on an entry may or may not cause the opening of the file.
  • Your mail is not in a file on its own, it is in a file that contains all the messages in the folder and the mail deleted until the folder is compacted.

• When you try to use Windows DVD Maker, get the message that Windows has closed this program

  Installed a new software for video (because the creation of windows dvd won't work) and before its opening, it says windows has closed this program... solutions.  And nothing!  It does this too often with internet explore.  Help!  Do I have to change some parameters of security or something?

  * original title - Windows maintains close everything I try to guess

  Hi twilight,

  ·         Do you have what video creation software installed?

  ·         How long have you been experiencing this problem?

  ·         Have you done other recent changes on the computer?

  ·         What is the exact error message/code?

  ·         The problem occurs with the entire application?

  I suggest you try the steps mentioned below and check if it helps.

  Step 1: Start the computer in safe mode and check if the problem persists.

  If the problem persists in safe mode run clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode

  Step 2: No detection system file checker (SFC).

  http://support.Microsoft.com/kb/929833

  Step 3: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• In ver39.0, I lost my display column of the number of messages in each of my subfolder - how can I get that back?

  When TB opens, it displays the tab file (version 39.0)
  On the left is a list of all my folders created sub - right is the list of the messages in the selected folders list.
  In my list of subfolders (left), there was a displayed column showing how many messages were in each case.
  I see is no longer this column of the counts of messages.
  That's happened?
  How can I get that back?
  Thank you
  Billy D. Reagan [email protected]

  DUUHH - I found how to restore the column Layout - VIEW - Menu - and check out pain of folder columns

• How can I see the number of messages in each folder

  I just installed TB 24.4.0 on a new desktop of Windows 8.
  On my older Windows 7 Desktop running TB 24.4.0, the folders pane is set to display the number of messages and the use of space in each folder.
  Both machines are on the same "Classic view", but I can't convince a new one to view the same file statistics, only the number of unread messages.
  Where can I find the option to do so?

  Install this add-on.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/extra-folder-columns/

• Qosmio F10: end strange message program all in closed system

  I use qosmio F-10, when I stopped my machine it refuses leaving message of END of program "Some Applications do not react" or "Win32 encounters an error which should be closed.

  for example, he gives this SMax4PNP is unresponsive, I finished this request by the Task Manager, but he gave another application that is not responding. Finally, I chose to click 'END NOW'. Then it took a long time to shut down the system

  Help, please

  Hello

  A lot of different programs and processes are running in the background. Obviously some of them won t be stopped. Try to detect applications that are a problem. If there are some of them that you need not of all utility configuration system under the Startup tab, you can check. There are all the applications listed that starts at the start of process. Remove the check mark in front of registered application startup item will be disabled.

  Good bye

• HP Envy 120 printer prints OK but the error message after each document

  After upgrading the firmware in my printer, I now get a window pop up with the title, "Unable to communicate with printer" at the end of each document.  The error message should be cleared before the next document in the queue will print.  Each document prints correctly despite the error message.

  Another thing that may cause this condition besides the update of the firmware is this: I have set up my printer for wireless printing, which worked OK.  However, I am currently using the printer with a wired USB connection.  Of course, the version non-reseau of the printer is selected as my printer 'default' regarding this error report.  The update of the firmware was held at the same time that change this "setup".

  Hey @rrbNevada,

  Welcome to the Forums of HP Support!
  
  I understand that your printer HP Envy 120 seems to have an error "Unable to communicate with the printer" after each print job is printed and this problem seems to have started after an update of the firmware running and change your connection type. Maybe it's a coincidence.

  For me to help you I need to know what operating system you print since?

  What is my OS?

  For now, I would like to run the print tool HP and doctor Scan. It is a practical tool that will 'fix print' questions automatically for you. It will scan the computer for any conflict of driver printer HP, connection problems and other issues that can cause problems with your printer. It will also try to fix these problems for you.

  HP Print and Scan Doctor

  If printing HP and doctor Scan fails to solve your problem, I recommend a complete uninstall and reinstall of your software and drivers for a clean slate to work with.

  Uninstalling the printer software

  After you have uninstalled the drivers and the printer software I need you to reinstall. To reinstall, I add two documents of reference below:

  Installation for USB under Mac OS X

  Installation of USB on Windows

  Because you use the printer for network and USB connections on your computer I suggest you first run installation from USB.

  Once the printer is installed for USB, then you can add in the wireless version.

  Adding a printer wireless on Windows:

  1. open the Printer Assistant software on your desktop. It should resemble a black printer icon and has your options of Scan inside.

  2. click on the 'utility' on the top tab

  3. click on 'software and configuration of the printer.

  4 enforce "connect a new device" for the network connection.

  This will add two copies of your printer and both will be implemented properly for scanning and printing.

  Adding a printer wireless on Mac:

  1. Click The HP utility icon in the Dock.

• Problem to get a 'Installing Update 1 1' message at each stop

  My system stops about 3-5 minutes after you receive the above message.  In the review of my update history, is listed "Security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)" appearing 20 times 16/6 to 6/27.  Now what should I do?

  Hi Murph265,
  
  Method 1
  I suggest you run the utility of windows update and see if that helps.

  Open the Windows Update troubleshooting tool http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  This would happen if you have auto update turned on the computer.
  Some updates apply to files or services that Windows uses. These types of updates can't be installed while Windows is running so that they are set up at shutdown or restart process

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  Method 2
  If the steps above fail, I you suggest to perform the clean boot and then install the update.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 of section of boot KB929135 to the computer in normal mode.

  I suggest you to download and install the update for Microsoft Visual C++ 2005 Service Pack 1.
  Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package MFC security update
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26347

• How can I disable the "single cartridge" message after each page (J110a printer)

  I just bought this printer to print only in black ink.  It works fine, but after I print every page I get a message...

  > When the HP printer operating mode single-cartridge, a message appears on the screen. If the message appears and two ink cartridges are installed in the product, make sure that the piece of plastic tape protection was removed from each print cartridge. When the Ribbon plastic covers of the print cartridge contacts, the product cannot detect the cartridge is installed.

  This message is useless and annoying.  It seems to be a blatent attempt sell color ink.  How do I turn it off?  Please answer quickly, that my time is running out to return the printer to the store because of this

  Thank you

  This widget could not be displayed.

• the application was unable to start correctly (0xc0000142) Message window during the closing down, labeled cmd.exe.

  I have a problem that only occurs during the closing down. When I select Shut Down I soon get a pop up that says... the application could not start correctly (0xc0000142) click on OK to close the application. window label is cmd.exe. Whether I click on the window, closing down product and eventually after say 30 seconds the alarm disappears. clicking on the alert simply displays another alert. This only occurs during the closing down. Also, I have no problem to launch cmd.exe during the normal operation, or any other program running in the command window. I read a few posts but don't see anything exactly like this, what happens during closing down.

  Suggestions would be appreciated.  Eric

  Hello
   

  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

   

  For additional information see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/troubleshooting-problems-while-in-safe-mode
   

   

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

• ObjectListField - show a message to each move a line to another

  Hi @all,

  I have an ObjectListField and get clicks on each line with NavigationClick.

  But now I want to get each move/navigation through the list: I want to show a message like Dialog.inform, on every movement of a line of the list to the other.

  I think it works with 'ListFieldCallback '.

  But I do not know how to handle it, because listfieldcallback is a black box to me

  Am I wrong? How can I make this work.

  All ideas, links etc are welcome.

  Thanks in advance.

  CUA

  Michael

  You can replace navigationmovement on the listfield directly. or on the screen, along with a check if the listfield is concentrated.

• BlackBerry smartphones this message after each reset "Eception exception: java.lang.Error.

  Hello

  Because I deleted some languages on my BB, and I kept the French, German and English language, after each reboot (after an update via BB Desktop Manager for example), I received this message:

  "Eception exception: java.lang.Error.

  I select 'OK' and that's all, but I want to solve this problem...

  Thank you.

  Hello!

  If you get this reliable error, then it is very likely that something in your OS device is damaged. This type of error is the "final" in the programming code - an event has happened for which there is no event handler in the code. I suggest to try two things (in order):

  (1) whenever random strange behaviors creep, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  (2) reload your OS:

  • KB11320 How to perform a clean reload of the BlackBerry Device Software using the Application Loader tool

  Good luck and let us know!

• TypeError: document.getElementById (myId) is null this guard popping up message - even though I closed it several times... simple help please?

  When im just browsing the internet, this message keeps popping up - no matter how many times crazy I close! I do not understand what plug - ins (etc etc), so please could you answer in the easiest way possible?

  If this happens on several different sites, it could be caused by an add-on which is by train (default?) to access pages or modify itself in response to the pages.

  You could just disable all add-ons nonessential here and then restart Firefox and see if this is useful:

  Orange Firefox button or classic menu Tools > Modules > category: Extensions
  
  Orange Firefox button or classic menu Tools > Modules > Plugins category

• HP Envy 5540: Unwanted "new HP cartridges installed" Message after each print

  At this printer for a few days and work all right, except that every time I print something I get a screen showing installed a green check mark and the words "new HP cartridges' which is a great nuisance.

  I think this is the file 'Insertion.html cartridge.

  How can I disable the stop/stop it please.

  Thank you

  Hi @Peterworks,

  Welcome to the HP Forums!

  I understand that you receive a message that says: "new HP cartridges installed. After printing with your printer HP Envy 5540. I am pleased to see that for you!

  Please see this post, Re: how to disable ink level notifications, of @wade1027and let me know what happens!

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope that solves your problem!

• Is signed in to Windows Messenger message on each reboot of Windows XP.

  Original title: problem connecting Windows Messenger.

  I am constantly (maybe not always) get a connection on the front of Windows Messenger message as my Windows XP Tablet starts and I'm connected to Windows. Then, I need to fill my username and passwords (again - not always) and I always check the box to remember such things. It stores this kind of things like a cookie that is erase my cCleaner or something? Why that often? I'm sick of it and considering only using my Yahoo Messenger, that always records me automatically at startup.

  Windows Messenger seems to work fine now. I just disconnected from Windows then recorded on twice, and it connects to Windows Messenger on its own well. I need to go to file > disconnect, then file > sign in during all windows connect to prevent show the signature in the thing forever. If I did these two steps, it would always be quickly connect.

  Also... don't know why you say cCleaner deletes passwords. Mine does not work. If I want to erase the passwords, I needed to:

  To delete information from Internet Explorer, click on tools > Internet Options. Select the content tab, and then click AutoComplete > settings. Uncheck the user names and passwords on forms, so it will not save those ever. Click on AutoComplete delete history... Now click on the history button to AutoComplete to remove. Check all of the boxes on the next window that you want to remove, and then click on delete - maybe not forms and browsing history

  But now I have this feature disabled, I use the password Omnipass software that uses fingerprint for me my reader to log on Windows, and then save the usernames and passwords for all sites. Is a system much better, because it will allow me to see the names of registered users & passwords after proving my identity with a shot of fingerprints. It will also allow me to delete only a single username / password entry if I need to change it, without destroying all others. Also, I can choose to disconnect Omnipass at any time so that the usernames & passwords don't fill up, if I need to temporarily circumvent this.