Qosmio F10: end strange message program all in closed system

Similar Questions

• Need new card mother/graphic card for Qosmio F10

  Where can I buy a motherboard and / or graphics for Qosmio F10?

  Thank you, all.

  Hi Karen

  I'm sure you know very well what options you have about parts of replacement hardware. Or you want to have prices, address and phone number? ;)

• Qosmio F10: fan runs always never end

  Hello

  I bought a qosmio f10 at the Canada, but I found my laptop fan is running always never end, so I would like to know is - this normal for qosmio and everyone has noticed that?
  It really a serouis problem, because that's a lot of noise. Who can tell me that is why?

  Hello

  Please try to make a few changes in the power management. You will find an option called cooling method. Change the level of the cooling method. It should help.

• Qosmio F10-136 - cannot install all drivers

  I have a Qosmio F10-136.

  I recently formatted hard drive. Because I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available on the Toshiba site, but I did not install all the drivers except the wireless LAN. Most of the configurations of driver refuse to run at all, some seem to install the files, but the driver is not detected.

  Please notify.

  Hello

  Do you have what OS installed on your Qosmio laptop?
  AFAIK the F10-136 is a European model and so you can download all drivers here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you use Windows XP, you can find the installation instructions document. Use this list as a recommended driver installation order.
  Usually the drivers must be installed first, and then Tools. You should start with the chipset drivers.

  Good bye

• Today after the update of cloud five programs, all work correctly, however, Lightroom opens, but only develops, gives a message: Please reactivate your membership to enable the module.

  Today after the update of cloud five programs, all work correctly, however, Lightroom opens, but only develops, gives a message: Please reactivate your membership to enable the module.

  What and how do I do to solve this problem? Thanks in advance!

  Hello Julian

  If you still encounter this problem, please try the following troubleshooting steps.

  Solution 1: Sign out of Lightroom 5.5 and then connect back with your Adobe ID

  Solution 2:

  Set the permission to the folder SLStore & SLCache:

  NOTE: Do this twice, once each for the SLCache and SLStore files.

  Mac:

  • Use the Finder to navigate to/Library/Application Support / Adobe / SLStore or/Library/Application Support / Adobe / SLStore.
  • Control-click on the folder and choose read information.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Set permissions:

  System: read/write

  Admin: read/write

  Everyone: read/write

  • Click the gear icon and select apply to closed. Close the dialog box for information.

  Win 7 / 8 to win:

  SLStore: ProgramData\Adobe\SLStore
  SLCache:

  Win 32 bit: program files Files\Adobe\SLCache\

  Win 64 bit: Program Files (x 86) \Common Files\Adobe\SLCache\

  • In the file Explorer, right click on the SLCache or SLStore folder, and then select Properties.
  • Click the Security tab and set the permissions:

  Administrators: Full control

  Power users: all except extraordinary and a total control

  System: Full control

  Users: Read and extraordinary

  • Click on advanced and, if requested, accept the (UAC) user account control elevation prompt.
  • Click on the owner tab, select administrators and click on modify.
  • Select Replace owner of subcontainers and objects. Click on apply and then click OK.
  • Click the permissions tab, and then click on change permissions.
  • Select Replace all permissions of child object with permissions inheritable of this object. Click OK, click Yes.
  • Click OK, and then click OK in the Windows Security dialog box. Click OK to close the advanced security settings dialog box.

  Suggestion 2: Rename the SLCache folder and relaunch Lightroom 5.5

  We have followed this issue of Lightroom. Please let me know what solution has solved your problem.

  If these solutions do not solve the problem for you, let know us.

  Thank you

  Scott

• Qosmio F10: Cannot read all DVDs recorded on JVC DVDRW

  I have a Toshiba Qosmio F10 in general I am very satisfied with the camera, but... I don't no why I can't play SOME DVD saved on my DVDRW JVC home and not in others, it's driving me crazy, no matter who else has this crazy situation, any suggestions would be most appreciated, as I add another HARD drive to this unit, 60 GB seems a bit small for a work of TV/DVD etc.

  Thank you very much, keep up the good work Toshiba ;-)

  Hello

  What you mean exactly with some DVD s? There is a specific difference between s DVD? Do you use several virgins DVD s from different producers?

  As far as I know you can built in 100 GB HARD drive.

• Receive strange messages when you try to retrieve BONES on Qosmio F30-140

  Hello

  I tried to recover the OS on my F30-140 and I had 2 strange messages:

  

  and after that

  

  Can someone tell me what is the problem?

  I can't tell what the problem you, but get into the BIOS and set it to default settings. After doing this try again.
  Please post the result.

• Qosmio F10 - Media library does not start

  Hello

  I have a Qosmio F10. My media library does not start.
  I get the message the application did not work properly. OK to close the application

  Someone please advice me what to do.
  Thanks in advance.

  I agree with Akuma. At the end you must install new OS. As already wrote Akuma, back up all your important data and use recovery for any new OS install media.

  It is a radical method, but most effective. ;)

• Qosmio F10-103, Unmountable_ boot_ volume... What can I do?

  Hello
  I have a Qosmio F10-103.
  One day there is the blue page with
  writing "Unmountable_ boot_ volume"
  appeared!
  What can I do?
  I have red on some forums that it (could) be
  a hard disk problem and that
  I could fix the cpu using the
  boot Windows xp CD, copying files
  Boot.ini, NTDETECT.com, NTLDR... but...
  Toshiba gave me only the DVD - rom backup,
  not boot xp.
  Then I tried to use this end DVD as I entered
  in Toshiba 1.0.1.0 recovery utility
  and I had a disc of control... the result was:
  «Application error 29004»
  Read down sector, result = 1, disc = 128, sectors
  132479 to 132481 if the problem persists contact toshiba... "
  I am here!
  It is useful to say that all modes of starting
  Windows does not work.
  In addition, the "look-like prompt back" that appears
  Once out of the recovery utility does not
  to copy the file, I need the DVD.
  What can I do?
  Is there something to do before... the formatting
  procedure?
  Thank you very much!!!

  Hello

  Check it please this Microsoft article on this error message.

  Microsoft Knowledge Base. Q297185

  Good bye

• Qosmio F10: Recovery DVD does not work?

  Hello. I have a qosmio series lappy F10 series well well I still get random stops, crashes and error log every time that I start.
  It's been very disturbing to me. I tried to use the system recovery cd, that I got with my laptop and when I followed the procedure in the user manual it starts the recovery then flashes that my system does not support recovery.

  Is this normal especially when I had my restore disk with my laptop. I want to reformat my drive hard back to the factory settings and it was completely wiped out with having to buy a new hard drive and windows xp.

  What I do and how can you help me in this? I'm at the end of my teather as one of my tasks is a dj from the internet and I can't keep crashing in the middle of my streaming. I don't want to lose my job!

  Help, please!

  Hello

  Very strange! The fact is that you cannot use the different recovery CD because each recovery CD is designed for a Toshiba laptop model. For example, you can not use a Qosmio F10 on a Qosmio G20 recovery CD.

  However, I assume that you use the recovery CD provided (as you say) and the recovery procedure should generally work without any warnings or error messages.
  I think there is something wrong with the CD. Maybe the wrong CD was shipped with this laptop?
  I recommend to ask the Toshiba ASP in your country. Here, you can also order the new CD.

  Good bye

• Qosmio F10: Edition of USB-mouse - how can I reinstal drivers USB port?

  Hello

  I am the owner of a Qosmio F10 with Win XP MCE.

  I have recently encountered problems with my USB ports I have 3 in my computer. It began with one of them and has now spread to the rest of them.

  The problem occurs especially with my mouse. The mouse freezes and sometimes I hear the alarm which is generally issued when disconnected a device. Sometimes it restarts seconds later and sometimes I have to physically unplug my mouse and plug it back in to restart.

  The problem also occurred with other devices that is my Ipod.

  The problem could be related to lack of memory because it seems to me see more during the execution of the programs such as Photoshop, Illustrator, InDesign, Flash, etc., however I can't say that for sure.

  Can I reinstal the drivers for the USB ports? I tried reinstalling my driver of mouse, with no effect.

  Please note that I cannot go into 'Control panel' I get an error message and closes the window.

  I hope someone can help me.

  Best regards

  Green tentacle

  USB drivers are part of the Windows operating system. 3rd party USB drivers don t exist!
  What you could do is to disconnect all USB devices and could remove the USB ports/hubs/controllers in Device Manager.

  Reboot the laptop.
  After restarting again the operating system should recognize and install again the USB ports.
  This accelerated procedure should help you

• Dysfunction of Qosmio F10 Windows MCE TV Tuner

  Hey everybody

  I use a Qosmio F10. Now for a few good years, anyway he came the age old time do a restore cd revovery just to speed him up again and the dealer him a new lease of life.

  Everything worked fine after the relocation outside the TV in Media Center, there is no option to watch TV in the program, and whenever I try to go into the settings of the TV I get the message "the tuner is defective or not installed. Please make sure that the tuner and a driver are installed. »

  I installed the latest driver, and I can get the TV running using the Qosmio player, so the problem seems to lie with Media Center. I don't know what else to try, everyone has to get suggestions?
  -Stu-

  Hello

  Have you installed all the updates?
  In addition, the TV tuner driver you will find on the page of the Toshiba driver is designed for MCE. AFAIK the Qosmio player uses the own TV tuner driver.

  The pilot on the Toshiba page has been changed to 08/01/05. It s a 1.0.26 version.

• Qosmio F10 does not accept my recovery cd

  My Qosmio F10 does not accept my restore cd. It will not work in windows or dos mode. In windows, I get the error message. This recovery and applications cd is not configured to work with this machine (laptop). This cd is for: Qosmio G10, Qosmio F10.
  Please use the correct recovery and Applications cd.
  I want to format this model and would really like to use the adequate recovery cd to reinstall all applications that I don't have a windows xp disc. Recovery, one is the only one I have.

  Hello Pam

  Insert the recovery media in the drive and turn off the laptop. Wait a second and turn it on. Press the C button and keep it down. On this track, the unit will start playback DVD recovery and if you use original recovery the recovery procedure will be implemented.

  You cannot reinstall the unit if the operating system is running.
  Good bye

• Qosmio F10-128 with bad reception of TV in MCE

  Hello
  I have a Qosmio F10-128 on the loan and have a problem with a TV tuner in Windows Media Center.
  During the configuration of the computer, everything seems ok, but when I try to watch a channel of the image is very poor with many artifacts and no noise.

  The strange thing is that everything is working fine with the Qosmio player.
  I have tried every setting in MCE.
  All connections are fine and as far as I know all the settings are correct.

  I live in Belgium, then uses the PAL settings.
  Do you have any suggestions?

  Many thanks in advance,

  L.

  Hi LVG

  What type of antenna is connected to your Qosmio? Is it a cable TV?

• Qosmio F10: update the display driver

  Hi all
  I use a Qosmio F10.
  Preinstalled system shows that Windows uses a generic monitor ("default") and the NVIDIA GeForce FX Go5700 6.6.1.2 version.
  I don't know how to update the monitor driver to one Qosmio use really (and not a generic driver).
  I tried to upgrade to the latest version of the display driver by using the file update on the site of Toshiba UK, but run in a system error, the Setup program could not find the file to uninstall the original driver.
  Any idea?

  Hi Christophe,

  I don't understand what you want to do. You have already installed the new display driver (ver.6.14.10.6612).

  Furthermore the display driver depends on the graphics card not on the monitor.

  Good bye